Polo 2018 ➤, Polo 2022 ➤, Taigo 2022 ➤
Maintenance - Edition 10.2021
– Set correct pressure on brake filling and bleeding equipment
⇒ Operating Manual, and switch on brake filling and bleed‐
ing equipment.
Note
♦ The bleeder hose must be firmly seated on bleeder valve so
that no air can enter the brake system.
♦ There must always be sufficient brake fluid in the brake res‐
ervoir so that no air can enter the brake system through the
reservoir.
♦ Start with front right brake caliper on RHD vehicles.
♦ Due to the tool attachment -VAS 6564/9- the rear wheels do
not need to be removed any more.
Front axle
– Remove cap -1- from bleeder valve of front left brake caliper.
– Push collector bottle bleeder hose -1- onto front left bleeder
valve.
– Open bleeder screw, and let appropriate quantity of brake
fluid run out ⇒ page 68 .
– Close bleeder screw. Torque: ⇒ Brake system; Rep. gr. 47;
Front brake caliper; Assembly overview - front brake caliper.
– Fit cap back onto bleeder valve on brake caliper.
– Repeat procedure on front right.
4. Descriptions of work
65
English 
