2021-2025 Volkswagen Taigo SUV Descriptions of work -> Multi-purpose additive for diesel fuel: adding User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Descriptions of work -> Multi-purpose additive for diesel fuel: adding for Your Volkswagen Taigo SUV First Generation (2021-2025)

Polo 2018 ➤, Polo 2022 ➤, Taigo 2022 ➤  
Maintenance - Edition 10.2021  
4.29.4  
Air filter element: removing and instal‐  
ling, 1.0 l TSI engines  
♦ Only applicable for engine codes: DLAA, DLAC  
Removing  
– Unscrew securing bolts -arrows- from upper part of air filter  
housing -1- and lift it together with air ducts to one side.  
– Remove air filter element -2-.  
Installing  
– Check air filter housing, air mass meter and water drains for  
soiling and clean them if necessary ⇒ page 108 .  
– Insert air filter element -2- centrally into mounting in lower  
part of air filter.  
– Carefully fit upper part of air filter onto lower part of air filter  
without applying excessive force. Screw in securing bolts  
-arrows-, and tighten them to specified torque.  
Specified torque  
Nm  
1.5  
Securing bolts -arrows-  
4.29.5  
Removing and installing air filter ele‐  
ment, 1.5 l TSI engines  
Removing  
– Unscrew securing bolts -arrows- from upper part of air filter  
housing -1- and lift it together with air ducts to one side.  
– Remove air filter element -2-.  
4. Descriptions of work  
105  
Polo 2018 ➤, Polo 2022 ➤, Taigo 2022 ➤  
Maintenance - Edition 10.2021  
Installing  
– Check air filter housing, air mass meter and water drains for  
soiling and clean them if necessary ⇒ page 108 .  
– Insert air filter element -2- centrally into mounting in lower  
part of air filter.  
– Carefully fit upper part of air filter onto lower part of air filter  
without applying excessive force. Screw in securing bolts  
-arrows-, and tighten them to specified torque.  
Specified torque  
Nm  
1.5  
Securing bolts -arrows-  
4.29.6  
Air filter element: removing and instal‐  
ling, 1.6 l PFI engines  
Removing  
– Pull air hose -1- off upper part of air filter.  
– Unscrew and remove bolts -arrows- from upper part of air  
filter.  
– Lift off upper part of air filter -3- and move aside complete  
with air ducts.  
– Remove air filter element -2-.  
Installing  
– Check housing and water drains for soiling, clean if necessa‐  
ry.  
– Insert air filter element -2- centrally into mounting in lower  
part of air filter.  
– Carefully fit upper part of air filter -3- onto lower part of  
air filter without applying excessive force. Screw in securing  
bolts and tighten them to specified torque.  
– Fit air hose -1- onto upper part of air filter again.  
Specified torque  
Nm  
2
Securing bolts -arrows-  
106  
4. Descriptions of work  

Related Topics

Removable towing bracket: checking and cleaning if necessary Swivel joints and suspension link mountings: inspecting Automatic headlight control and static cornering light: checking function Battery (12V): checking battery terminal clamps for secure seating Battery (12V): checking with battery tester Status of battery (12V): reading - sending diagnosis protocol via online connection Front passenger front airbag: checking key switch and ?ON/OFF function? Tyres: checking condition, wear pattern, tyre pressure and tread depth Brake and clutch system: changing brake fluid Brake system and shock absorbers: inspecting for leaks and damage Brake fluid level: checking Checking thickness of pads/linings on front and rear brakes and condition of brake discs/drums Diesel fuel filter: draining Diesel fuel filter: renewing Diesel particulate filter: checking Dual clutch gearbox 0D9: changing gear oil and filter Electric windows: checking positioning (open and close functions) Natural gas system: resetting interval display Natural gas system: visually inspecting natural gas tank for corrosion and leakage Natural gas system: checking wax layer between natural gas fuel tank and fuel tank shut-off valve Natural gas tank: renewing Natural gas filler connection and sealing cap: checking condition, if necessary cleaning and checking seal Fault memory of all systems: reading with vehicle diagnostic tester, correcting possible faults Boots: inspecting Interior and exterior body: inspecting for corrosion with doors and flaps open Poly V-belt: renewing Poly V-belt: checking condition Cooling system: checking frost protection and coolant level Air filter: cleaning housing and renewing filter element Multi-purpose additive for petrol fuel: adding Engine and components in engine compartment: inspecting for leaks and damage Engine cover panel ?top?: removing and installing Motor compartment cover (noise insulation) ?bottom?: removing and installing Engine oil level: checking Engine oil: draining; renewing oil filter and filling engine oil Engine oil: capacities and specifications up to model year 2020 Engine oil: capacities and specifications as of model year 2021 Panoramic sliding sunroof Road test: performing (driving behaviour, noises, air conditioner etc.) Wheel securing bolts: tightening to specified torque Reducing agent (AdBlue?/DEF): replenishing Reducing agent (AdBlue?/DEF): changing Tyre Pressure Loss Indicator: calibrating Tyre repair set: checking Window wash/wipe system and headlight washer system: checking function Headlight adjustment: checking halogen headlights Headlight adjustment: checking LED headlights (Polo) Headlight adjustment: checking LED headlights (ECO) (Polo PA, Taigo) Headlight adjustment: checking matrix LED headlights Headlight adjustment: checking fog lights Service interval display: resetting Service interval display: recoding Track rods: checking clearance, attachment and boots Interior filter: cleaning housing and renewing filter element Transportation mode: switching off Transportation devices: removing blocking pieces Clock and date: setting Underbody: inspecting for damage to underbody sealant, underbody panels, routing of lines, plugs Toothed belt (petrol engines): renewing Camshaft drive toothed belt (diesel engines): renewing Spark plugs: renewing

Popular Owner Manuals