Polo 2018 ➤, Polo 2022 ➤, Taigo 2022 ➤
Maintenance - Edition 10.2021
•
•
•
Lenses must not be damaged or dirty.
Reflectors and bulbs OK.
The vehicle must be rolled forward and backward several
metres or front and rear springs must be bounced fully sev‐
eral times so that springs settle.
•
•
•
•
Vehicle and headlight adjuster must be on a level surface.
Vehicle and headlight adjuster must be aligned.
Inclination must be set.
Refer to the ⇒ operating instructions for headlight adjust‐
ment units.
•
The current software for the headlight adjustment unit -VAS
621 001- is available on the equipment manufacturer’s
homepage.
4.47.2
Headlight adjustment (ECE): adjusting
Special tools and workshop equipment required
♦ Headlight adjustment unit -VAS 621 001-
♦ Headlight adjustment unit -VAS 621 005-
Note
For certain export markets, halogen headlights with manually
regulated headlight range control are not offered.
Depending on the equipment level, the headlight range control
can be adjusted via the knurled wheel or in the menu Vehicle
Settings of the infotainment system.
– Check headlight height adjustment by setting the maximum
level and monitoring the headlights' light.
– Then (if fitted) set the headlight range control to position 0 .
The inclination on the headlight adjustment unit is set according
to the fuel level in the fuel tank.
Inclination setting for ECE-compliant headlights
Fill level of
fuel gauge
Inclination
0 to 1/2
1/2 to 1
1.4%
1.0%
Check the following:
– Whether, with the dipped beam switched on, the horizontal
bright/dark boundary contacts the dividing line -1- of the test
area and
4. Descriptions of work
145
English 