Advertisement

Advertisement

Technical data -> 1.2 Safety precautions when handling refrigerants for Your Volkswagen Touran 4 Door Second Generation (2015-2022)

Arteon 2018 ➤ , Atlas 2017 ➤ , CC 2012 ➤ , Caddy 2016 ➤ , Crafter 201 ...  
Air conditioning systems with refrigerant R1234yf - General information - Edition 07.2017  
00 – Technical data  
1
Safety information  
(VRL010467; Edition 07.2017)  
⇒ “1.1 Safety precautions when working on air conditioning sys‐  
tems”, page 1  
⇒ “1.2 Safety precautions when handling refrigerants”,  
page 1  
⇒ “1.3 Safety measures when working on vehicles with a start/  
stop system”, page 2  
⇒ “1.4 Safety measures when using air conditioner service sta‐  
tions”, page 2  
⇒ “1.5 Safety measures for working on vehicles with high-voltage  
system”, page 3  
⇒ “1.6 Safety precautions when working in the vicinity of high-  
voltage components”, page 4  
⇒ “1.7 Safety measures when working on pressurised tanks/con‐  
tainers”, page 4  
lk  
1.1  
Safety precautions when working on air conditioning systems  
Risk of fatal injury and explosion from sources of ignition  
Risk of fatal injury and explosion from sources of ignition in the  
vicinity of air conditioning systems and refrigerant tanks. Escap‐  
ing refrigerant could ignite and cause an explosion. Risk of ex‐  
plosion leading to loss of life or serious injuries.  
– Never bring sources of ignition close to air conditioning sys‐  
tems and refrigerant tanks.  
– Avoid electrostatic discharge, sparks from tools striking sur‐  
faces and hot surfaces.  
Risk of damage to refrigerant lines  
There is a risk of damage to the refrigerant lines due to rupture of  
the inner foil.  
– Never bend refrigerant lines to a radius less than 100 mm.  
1.2  
Safety precautions when handling refrigerants  
Risk of suffocation and poisoning from refrigerant  
Coughing and nausea leading to suffocation and poisoning from  
refrigerant vapours possible.  
– Never inhale refrigerant vapours.  
– Only work on the refrigerant circuit and refrigerant tanks in well  
ventilated areas.  
– Never work in or near cellars or other low lying areas.  
– Switch on the extraction system.  
1. Safety information  
1
GETth  
Arteon 2018 ➤ , Atlas 2017 ➤ , CC 2012 ➤ , Caddy 2016 ➤ , Crafter 201 ...  
Air conditioning systems with refrigerant R1234yf - General information - Edition 07.2017  
Risk of freezing injury from refrigerant  
When working on the air conditioning system, there is a risk of  
highly pressurised refrigerant escaping from the system. There is  
a risk of injury to the skin and parts of the body due to freezing.  
– Wear protective gloves.  
– Wear protective goggles.  
– Extract refrigerant and open the refrigerant circuit immediately  
afterwards.  
– If more than 10 minutes have passed since the refrigerant was  
extracted, repeat the extraction process before opening the  
refrigerant circuit. Pressure could build up in the refrigerant  
circuit from continued evaporation.  
1.3  
Safety measures when working on vehicles with a start/stop system  
Risk of injury due to unexpected motor start  
lk  
If the vehicle’s start/stop system is activated, the engine can start  
unexpectedly. A message in the dash panel insert indicates  
whether the start/stop system is activated.  
– Deactivate start/stop system by switching off the ignition.  
1.4  
Safety measures when using air condi‐  
tioner service stations  
Before connecting the charging system to the air conditioner,  
make sure that all existing shut-off valves are closed.  
Before the air conditioner service station is decoupled from the  
air conditioning system, ensure that the process is complete.  
This will prevent any more refrigerant than necessary and  
technically unavoidable from entering the atmosphere.  
Once the purified refrigerant from the air conditioner service  
station /extraction system has been filled into an external com‐  
pressed-gas cylinder, close the hand shut-off valves at the  
cylinder and charging system.  
Do not expose the air conditioner service station , extracting  
and charging system to moisture and do not use in a damp  
environment.  
Before performing any maintenance work on the air condition‐  
er service station , disconnect the extracting and charging  
system from the power supply.  
To reduce the risk of fire, avoid using an extension cable. If  
the use an extension cable is unavoidable, use an extension  
2
cable with a cross-section of at least 2.5 mm .  
In case of fire, remove external cylinder.  
If oil is drawn out of the air conditioning system by the suction  
accumulator of the air conditioner service station and emptied  
into the supplied measuring beaker, ensure that it is poured  
into a sealable container afterwards as the oil could contain a  
small amount of refrigerant. Refrigerant must not be released  
into the environment.  
2
Rep. gr.00 - Technical data  
GETth  

Related Topics