2019-2026 Lexus UX SUV Using the driving support systems User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Using the driving support systems for Your Lexus UX SUV First Generation (2019-2026)

213
4-5. Using the driving support systems
4
Driving
4-5.Using the driving support system s
*
: If equipped
This Owner’s Manual contains infor-
mation for Ver.2. For the latest infor-
mation about the controls, use,
warnings/precautions, etc. of each
function of Lexus Safety System +3,
refer to the Digital Owner’s Manual at
the Owner’s Manual website.
If the software of this system has been
updated after initial purchase of the
vehicle, before using this system, be
sure to read the Owner’s Manual
which corresponds to the software
version of the system.
■ Precautions for use
● Be aware that some functions may tem-
porarily be disabled if a legal or safety
related issue occurs.
● If a connected services contract has not
been entered or has expired, software
updates will not be able to be performed
wirelessly.
If the software of this system has been
updated after initial purchase of the
vehicle, to access the appropriate
Owner’s Manual, it is necessary to
check the software version of the sys-
tem and then visit the Owner’s Manual
website.
■ Checking the version using Lexus
App
The software version of the system can
be checked using Lexus App.
■ Selecting your vehicle’s Lexus
Safety System +3 version
1
Access the following URL using a
computer or smartphone:
For U.S.A owners
https://drivers.lexus.com/lexusdrivers/resources/
owners-manuals/
manual?om=om76687u.ux300h.2025.2401.hev.vh
Lexus Safety System +3 soft-
ware update
*
It is necessary to enter a connected
services contract, provided by
Lexus, to use these functions. For
details, contact your Lexus dealer.
WARNING
■ For safe use
When the Lexus Safety System +3 soft-
ware is updated, the operating methods
of functions may change. Using this sys-
tem without knowing the correct operat-
ing methods may lead to an accident
resulting in death or serious injury.
● Make sure to read the Digital Owner’s
Manual which corresponds to the soft-
ware version of the system, available at
the Owner’s Manual website, before
using this system.
Content of the Lexus Safety Sys-
tem +3 Owner’s Manual
Checking your vehicle’s Lexus
Safety System +3 version
214
4-5. Using the driving support systems
For Canadian owners
https://www.lexus.ca/lexus/know-your-
lexus/manual?om=om76687u.ux300h.
2025.2401.hev.vh
2 Select the file which includes the
previously checked system version.
If a software update is available, a noti-
fication will be displayed by Lexus App.
Follow the instructions displayed on
the screen.
■ Software update precautions
● After a software update has been per-
formed, it will not be possible to revert to
a previous version.
● Depending on the communication envi-
ronment and the content of an update, a
software update may take several hours.
Although an update will be suspended
when the power switch is turned off, it will
resume when the power switch is
changed back to ON.
● Lexus Safety System +3 can still be used
while a software update is being per-
formed.
■ What can be checked using the Lexus
App
The following items can be checked or per-
formed.
● Software version, update details, precau-
tions, use methods, etc.
● Software update
Updating the software
215
4-5. Using the driving support systems
4
Driving
Lexus Safety System +3
The Lexus Safety System +3 con-
sists of the driving assist systems
and contributes to a safe and com-
fortable driving experience:
WARNING
■ Lexus Safety System +3
The Lexus Safety System +3 operates
under the assumption that the driver will
drive safely, and is designed to help
reduce the impact to the occupants in a
collision and assist the driver under nor-
mal driving conditions.
As there is a limit to the degree of recog-
nition accuracy and control performance
that this system can provide, do not
overly rely on this system. The driver is
solely responsible for paying attention to
the vehicle’s surroundings and driving
safely.
■ For safe use
● Do not overly rely on this system. The
driver is solely responsible for paying
attention to the vehicle’s surroundings
and driving safely. This system may not
operate in all situations and provided
assistance is limited. Over-reliance on
this system to drive the vehicle safely
may lead to an accident resulting in
death or serious injury.
● Do not attempt to test the operation of
the system, as it may not operate prop-
erly, possibly leading to an accident.
● If attention is necessary while perform-
ing driving operations or a system mal-
function occurs, a warning message or
warning buzzer will be operated. If a
warning message is displayed on the
display, follow the instructions dis-
played.
● Depending on external noise, the vol-
ume of the audio system, etc. it may be
difficult to hear the warning buzzer.
Also, depending on the road condi-
tions, it may be difficult to recognize
the operation of the system.
■ When it is necessary to disable the
system
In the following situations, make sure to
disable the system.
Failure to do so may lead to the system
not operating properly, possibly leading
to an accident resulting in death or seri-
ous injury.
● When the vehicle is tilted due to being
overloaded or having a flat tire
● When driving at extremely high
speeds
● When towing another vehicle
● When the vehicle is being transported
by a truck, ship, train, etc.
● When the vehicle is raised on a lift and
the tires are allowed to rotate freely
● When inspecting the vehicle using a
drum tester such as a chassis dyna-
mometer or speedometer tester, or
when using an on vehicle wheel bal-
ancer
● When the vehicle is driven in a sporty
manner or off-road
● When using an automatic car wash
● When a sensor is misaligned or
deformed due to a strong impact
being applied to the sensor or the area
around the sensor
● When accessories which obstruct a
sensor or light are temporarily
installed to the vehicle
● When a compact spare tire or tire
chains are installed to the vehicle or an
emergency tire puncture repair kit has
been used
216
4-5. Using the driving support systems
■ AHB (Automatic High Beam)
P.201
■ PCS (Pre-Collision System)
P.221
■ LTA (Lane Tracing Assist)
P.231
■ LDA (Lane Departure Alert)
P.235
■ PDA (Proactive Driving Assist)
P.241
■ RSA (Road Sign Assist)
*
P.246
■ Dynamic radar cruise control
P.249
■ Cruise control
P.259
■ Emergency Driving Stop System
P.262
*
: If equipped
Various sensors are used to obtain the
necessary information for system
operation.
■ Sensors which detect the sur-
rounding conditions
Front
Front radar sensor
Front camera
Rear
Rear side radar sensors
WARNING
● When the tires are excessively worn or
the inflation pressure of the tires is low
● When tires other than the manufac-
turer specified size are installed
● When the vehicle cannot be driven
stably, due to a collision, malfunction,
etc.
Driving assist system
Sensors used by Lexus Safety
System +3
A
B
A
217
4-5. Using the driving support systems
4
Driving
WARNING
■ To prevent malfunction of the radar
sensors
Observe the following precautions.
Failure to do so may lead to a radar sen-
sor not operating properly, possibly
leading to an accident resulting in death
or serious injury.
● Keep the radar sensors and radar sen-
sor covers clean at all times.
Clean the front of a radar sensor or the
front or back of a radar sensor cover if it
is dirty or covered with water droplets,
snow, etc.
When cleaning the radar sensor and
radar sensor cover, use a soft cloth to
remove dirt so as to not damage them.
Radar sensor
Radar sensor cover
● Do not attach accessories, stickers
(including transparent stickers), alumi-
num tape, etc. to a radar sensor or
radar sensor cover and their sur-
rounding area.
● Do not subject a radar sensor or its
surrounding area to impact.
If a radar sensor, the front grille, or front
bumper has been subjected to a impact,
have the vehicle inspected by your Lexus
dealer.
● Do not disassemble the radar sensors.
A
B
● Do not modify or paint the radar sen-
sors or radar sensor cover, or replace
them with anything other than Lexus
genuine parts.
● In the following situations, recalibra-
tion of the radar sensors will be neces-
sary. For details, contact your Lexus
dealer.
• When a radar sensor is removed and
installed, or replaced
• When the front bumper or the front
grille has been replaced
■ To prevent malfunction of the front
camera
Observe the following precautions.
Failure to do so may lead to the front
camera not operating properly, possibly
leading to an accident resulting in death
or serious injury.
● Always keep the windshield clean.
• If the windshield is dirty or covered
with an oily film, water droplets, snow,
etc., clean the windshield.
• Even if a glass coating agent is applied
to the windshield, it will still be neces-
sary to use the windshield wipers to
remove water droplets, etc. from the
area of the windshield in front of the
front camera.
• If the inner side of the windshield
where the front camera is installed is
dirty, contact your Lexus dealer.
218
4-5. Using the driving support systems
■ Situations in which the sensors may not
operate properly
● When the height or inclination of the
vehicle has been changed due to modifi-
cations
● When the windshield is dirty, fogged up,
WARNING
● Do not attach stickers (including trans-
parent stickers) or other items to the
area of the windshield in front of the
front camera (shaded area in the illus-
tration).
Approximately 1.6 in. (4 cm)
Approximately 1.6 in. (4 cm)
● If the part of the windshield in front of
the front camera is fogged up or cov-
ered with condensation or ice, use the
windshield defogger to remove the
fog, condensation, or ice.
● If water droplets cannot be properly
removed from the area of the wind-
shield in front of the front camera by
the windshield wipers, replace the
wiper insert or wiper blade.
● Do not attach window tint to the wind-
shield.
● Replace the windshield if it is damaged
or cracked.
If the windshield has been replaced,
recalibration of the front camera will be
necessary. For details, contact your
Lexus dealer.
● Do not allow liquids to contact the
front camera.
● Do not allow bright lights to shine into
the front camera.
A
B
● Do not damage the lens of the front
camera or allow it to become dirty.
When cleaning the inside of the wind-
shield, do not allow glass cleaner to con-
tact the lens of the front camera. Do not
touch the lens of the front camera.
If the lens of the front camera is dirty or
damaged, contact your Lexus dealer.
● Do not subject the front camera to a
strong impact.
● Do not change the position or orienta-
tion of the front camera or remove it.
● Do not disassemble the front camera.
● Do not modify any parts around the
front camera, such as the inside rear
view mirror or ceiling.
● Do not attach accessories which may
obstruct the front camera to the hood,
front grille, or front bumper. For
details, contact your Lexus dealer.
● If a surfboard or other long object is to
be mounted on the roof, make sure
that it will not obstruct the front cam-
era.
● Do not modify or change the head-
lights and other lights.
■ Front camera installation area on the
windshield
If the system determines that the wind-
shield may be fogged up, it will automati-
cally operate the heater to defog the part
of the windshield around the front cam-
era. When cleaning, etc., be careful not
to touch the area around the front cam-
era until the windshield has cooled suffi-
ciently, as touching it may cause burns.
219
4-5. Using the driving support systems
4
Driving
cracked or damaged
● When the ambient temperature is high or
low
● When mud, water, snow, dead insects,
foreign matter, etc., is attached to the
front of the sensor
● When in inclement weather such as
heavy rain, fog, snow, or a sandstorm
● When water, snow, dust, etc. is thrown up
in front of the vehicle, or when driving
through mist or smoke
● When the headlights are not illuminated
while driving in the dark, such as at night
or when in a tunnel
● When the lens of a headlight is dirty and
illumination is weak
● When the headlights are misaligned
● When a headlight is malfunctioning
● When the headlights of another vehicle,
sunlight, or reflected light shines directly
into the front camera
● When the brightness of the surrounding
area changes suddenly
● When driving near a TV tower, broad-
casting station, electric power plant,
radar equipped vehicles, etc., or other
location where strong radio waves or
electrical noise may be present
● When a wiper blade is blocking the front
camera
● When in a location or near objects which
strongly reflect radio waves, such as the
following:
• Tunnels
• Truss bridges
• Gravel roads
• Rutted, snow-covered roads
• Walls
• Large trucks
• Manhole covers
• Guardrail
• Metal plates
● When near a step or protrusion
● When a detectable vehicle is narrow,
such as a small mobility vehicle
● When a detectable vehicle has a small
front or rear end, such as an unloaded
truck
● When a detectable vehicle has a low
front or rear end, such as a low bed trailer
● When a detectable vehicle has extremely
high ground clearance
● When a detectable vehicle is carrying a
load which protrudes from its cargo area
● When a detectable vehicle has little
exposed metal, such as a vehicle which is
partially covered with cloth, etc.
● When a detectable vehicle is irregularly
shaped, such as a tractor, sidecar, etc.
● When the distance between the vehicle
and a detectable vehicle has become
extremely short
● When a detectable vehicle is at an angle
● When snow, mud, etc. is attached to a
detectable vehicle
● When driving on the following kinds of
roads:
• Roads with sharp curves or winding
roads
• Roads with changes in grade, such as
sudden inclines or declines
• Roads which is sloped to the left or right
• Roads with deep ruts
• Roads which are rough and unmain-
tained
• Roads which frequently undulate or are
bumpy
● When the steering wheel is being oper-
ated frequently or suddenly
● When the vehicle is not in a constant
220
4-5. Using the driving support systems
position within a lane
● When parts related to this system, the
brakes, etc. are cold or extremely hot,
wet, etc.
● When the wheels are misaligned
● When driving on slick road surfaces, such
as when it is covered with ice, snow,
gravel, etc.
● When the course of the vehicle differs
from the shape of a curve
● When the vehicle speed is excessively
high when entering a curve
● When entering/exiting a parking lot,
garage, car elevator, etc.
● When driving in a parking lot
● When driving through an area where
there are obstructions which may contact
your vehicle, such as tall grass, tree
branches, a curtain, etc.
● When driving in strong wind
■ Situations in which the lane may not be
detected
● When the lane is extremely wide or nar-
row
● Immediately after changing lanes or
passing through an intersection
● When driving in a temporary lane or lane
regulated by construction
● When there are structures, patterns,
shadows which are similar to lane lines in
the surrounding
● When there are multiple white lines for a
lane line
● When the lane lines are not clear or driv-
ing on a wet road surface
● When a lane line is on a curb
● When driving on a bright, reflective road
surface, such as concrete
■ Situations in which some or all of the
functions of the system cannot operate
● When a malfunction is detected in this
system or a related system, such as the
brakes, steering, etc.
● When the VSC, TRAC, or other safety
related system is operating
● When the VSC, TRAC, or other safety
related system is off
■ Changes in brake operation sound and
pedal response
● When the brakes have been operated,
brake operation sounds may be heard
and the brake pedal response may
change, but this does not indicate a mal-
function.
● When the system is operating, the brake
pedal may feel stiffer than expected or
sink. In either situation the brake pedal
can be depressed further. Further
depress the brake pedal as necessary.
221
4-5. Using the driving support systems
4
Driving
The system can detect the following as
detectable objects. (Detectable
objects differ depending on the func-
tion.)
Vehicles
Bicycles
*
Pedestrians
Motorcycles
*
Walls
*
: Detected as a detectable object only
when being ridden.
■ Pre-collision warning
When the system determines that the
possibility of a collision is high, a buzzer
will sound and an icon and warning
message will be displayed on the multi-
information display to urge the driver
to take evasive action.
PCS (Pre-Collision System)
The pre-collision system uses sen-
sors to detect objects (P.221) in
the path of the vehicle. When the
system determines that the possi-
bility of a frontal collision with a
detectable object is high, a warning
operates to urge the driver to take
evasive action and the potential
brake pressure is increased to help
the driver avoid the collision. If the
system determines that the possi-
bility of a collision is extremely high,
the brakes are automatically
applied to help avoid the collision or
help reduce the impact of the colli-
sion.
The pre-collision system can be dis-
abled/enabled and the warning tim-
ing can be changed. (P.230)
WARNING
■ For safe use
● Driving safely is solely the responsibil-
ity of the driver. Pay careful attention
to the surrounding conditions in order
to ensure safe driving.
Never use the pre-collision system in
place of normal braking operations. This
system cannot help avoid or reduce the
impact of a collision in every situation.
Over-reliance on this system to drive the
vehicle safely may lead to an accident
resulting in death or serious injury.
● Although the pre-collision system is
designed to help avoid or help reduce
the impact of a collision, its effective-
ness may change according to various
conditions. Therefore, it may not
always be able to achieve the same
level of performance.
Read the following items carefully. Do
not overly rely on this system and always
drive carefully.
• For safe use: P.215
■ When to disable the pre-collision sys-
tem
● When it is necessary to disable the sys-
tem: P.215
Detectable objects
System functions
222
4-5. Using the driving support systems
If the detectable object is a vehicle,
moderate braking will be performed
with the warning.
If the system determines that the accel-
erator pedal is strongly depressed, the
following icon and message will be dis-
played on the multi-information dis-
play.
■ Pre-collision brake assist
If the system determines that the possi-
bility of a collision is high and the brake
operation by the driver is insufficient,
the braking power will be increased.
■ Pre-collision brake control
If the system determines that the possi-
bility of a collision is extremely high, the
brakes are automatically applied to
help avoid the collision or reduce the
impact of the collision.
■ Emergency steering assist
If the system determines that the fol-
lowing conditions are met, assistance
will be provided to help enhance vehi-
cle stability and prevent lane depar-
ture. During assistance, in addition to
the pre-collision warning, the follow-
ing icon will be displayed on the multi-
information display.
The possibility of a collision is high
There is sufficient space within the
lane to perform evasive steering
maneuvers
The driver is operating the steering
wheel
During assistance, the pre-collision
warning will operate and a message
will be displayed to warn the driver.
■ Intersection collision avoidance
support (left/right turn)
In situations such as the following, if the
system determines that the possibility
of a collision is high, the pre-collision
warning and pre-collision braking will
operate.
Depending on the intersection, assis-
tance may not operate correctly.
When turning left/right at an inter-
section and crossing the path of an
oncoming vehicle
223
4-5. Using the driving support systems
4
Driving
When turning left/right and a
pedestrian or bicycle is detected
■ Intersection collision avoidance
support (crossing vehicles)
At an intersection, etc., if the system
determines that the possibility of a col-
lision with an approaching vehicle or
motorcycle is high, the pre-collision
warning and pre-collision braking will
operate.
Depending on the intersection, assis-
tance may not operate correctly.
■ Acceleration Suppression at Low
Speed
When driving at a low speed, if the
accelerator pedal is strongly
depressed and the system determines
that there is a possibility of a collision,
hybrid system output will be restrained
or the brakes will be applied weakly to
restrict acceleration. During operation,
a buzzer will sound and the following
icon and message will be displayed on
the multi-information display.
■ Suspension control (if equipped)
When the system determines that the
possibility of a collision is high, the
Adaptive Variable Suspension System
(P.293) controls the damping force
of the shock absorbers to help main-
tain an appropriate vehicle posture.
WARNING
■ Pre-collision braking
● When the pre-collision braking func-
tion is operating, a large amount of
braking force will be applied.
● The pre-collision braking function is
not designed to hold the vehicle
stopped. If the vehicle is stopped by
pre-collision brake control, the driver
should operate the brakes immedi-
ately as necessary.
224
4-5. Using the driving support systems
WARNING
● The pre-collision braking function may
not operate if certain operations are
performed by the driver. If the acceler-
ator pedal is being depressed strongly
or the steering wheel is being turned,
the system may determine that the
driver is taking evasive action and pos-
sibly prevent the pre-collision braking
function from operating.
● If the brake pedal is being depressed,
the system may determine that the
driver is taking evasive action and pos-
sibly delay the operation timing of the
pre-collision brake control.
■ Acceleration Suppression at Low
Speed
If the steering wheel is being turned, the
system may determine that the driver is
taking evasive action and possibly pre-
vent the Acceleration Suppression at
Low Speed function from operating or
possibly causing its operation to be can-
celed.
■ Emergency steering assist
● The emergency steering assist will be
canceled when the system determines
that lane departure prevention control
has completed.
● Depending on operations performed
by the driver, emergency steering
assist may not operate or operation
may be canceled.
• If the accelerator pedal is depressed
strongly, the steering wheel is turned
heavily, the brake pedal is depressed,
or the turn signal lever is operated, the
system may determine that the driver
is taking evasive action and the emer-
gency steering assist may not operate.
• While the emergency steering assist is
operating, if the accelerator pedal is
depressed strongly, the steering wheel
is turned heavily, or the brake pedal is
depressed, the system may determine
that the driver is taking evasive action
and emergency steering assist opera-
tion may be canceled.
• While the emergency steering assist is
operating, if the steering wheel is held
or turned in the opposite direction of
system operation, emergency steer-
ing assist operation will be canceled.
225
4-5. Using the driving support systems
4
Driving
■ Operating conditions of each function of the pre-collision system
The pre-collision system is enabled and the system determines that the possibility of a fron-
tal collision with a detected object is high.
However, the system will not operate in the following situations:
● When the vehicle has not been driven a certain amount after a terminal of the 12-volt bat-
tery has been disconnected and reconnected
● When the shift position is in R
● When the VSC OFF indicator is illuminated (only the pre-collision warning function will
be operational)
The following are the operational speeds and cancelation conditions of each function:
● Pre-collision warning
While the pre-collision warning is operating, if the steering wheel is operated heavily or sud-
denly, the pre-collision warning may be cancelled.
● Pre-collision brake assist
Detectable objects Vehicle speed
Relative speed between your
vehicle and object
Preceding vehicles, stopped
vehicles
Approximately 3 to 110 mph
(5 to 180 km/h)
Approximately 3 to 110 mph
(5 to 180 km/h)
Oncoming vehicles
Approximately 20 to 110
mph (30 to 180 km/h)
Approximately 50 to 130
mph (80 to 220 km/h)
Bicycles
Approximately 3 to 50 mph
(5 to 80 km/h)
Approximately 3 to 50 mph
(5 to 80 km/h)
Pedestrians
Approximately 3 to 50 mph
(5 to 80 km/h)
Approximately 3 to 50 mph
(5 to 80 km/h)
Preceding motorcycles,
stopped motorcycles
Approximately 3 to 110 mph
(5 to 180 km/h)
Approximately 3 to 50 mph
(5 to 80 km/h)
Oncoming motorcycles
Approximately 20 to 110
mph (30 to 180 km/h)
Approximately 20 to 110
mph (30 to 180 km/h)
Detectable objects Vehicle speed
Relative speed between your
vehicle and object
Preceding vehicles, stopped
vehicles
Approximately 20 to 110
mph (30 to 180 km/h)
Approximately 7 to 110 mph
(10 to 180 km/h)
Bicycles
Approximately 20 to 50
mph (30 to 80 km/h)
Approximately 20 to 50
mph (30 to 80 km/h)
226
4-5. Using the driving support systems
● Pre-collision braking
If either of the following occur while the pre-collision braking function is operating, it will be
canceled:
• The accelerator pedal is strongly depressed
• The steering wheel is operated heavily or suddenly
● Emergency steering assist
The emergency steering assist will not operate when the turn signal lights are flashing.
While the emergency steering assist is operating, if any of the following are performed,
emergency steering assist operation may be cancelled:
• The accelerator pedal is strongly depressed
• The steering wheel is operated heavily or suddenly
Pedestrians
Approximately 20 to 50
mph (30 to 80 km/h)
Approximately 20 to 50
mph (30 to 80 km/h)
Preceding motorcycles,
stopped motorcycles
Approximately 20 to 110
mph (30 to 180 km/h)
Approximately 7 to 50 mph
(10 to 80 km/h)
Detectable objects Vehicle speed
Relative speed between your
vehicle and object
Preceding vehicles, stopped
vehicles
Approximately 3 to 110 mph
(5 to 180 km/h)
Approximately 3 to 110 mph
(5 to 180 km/h)
Oncoming vehicles
Approximately 20 to 110
mph (30 to 180 km/h)
Approximately 50 to 130
mph (80 to 220 km/h)
Bicycles
Approximately 3 to 50 mph
(5 to 80 km/h)
Approximately 3 to 50 mph
(5 to 80 km/h)
Pedestrians
Approximately 3 to 50 mph
(5 to 80 km/h)
Approximately 3 to 50 mph
(5 to 80 km/h)
Preceding motorcycles,
stopped motorcycles
Approximately 3 to 110 mph
(5 to 180 km/h)
Approximately 3 to 50 mph
(5 to 80 km/h)
Oncoming motorcycles
Approximately 20 to 110
mph (30 to 180 km/h)
Approximately 20 to 110
mph (30 to 180 km/h)
Detectable objects Vehicle speed
Relative speed between your
vehicle and object
Preceding vehicles, stopped
vehicles, bicycles, pedestri-
ans, motorcycles
Approximately 25 to 50
mph (40 to 80 km/h)
Approximately 25 to 50
mph (40 to 80 km/h)
Detectable objects Vehicle speed
Relative speed between your
vehicle and object
227
4-5. Using the driving support systems
4
Driving
• The brake pedal is depressed
● Intersection collision avoidance support (left/right turn)
The intersection collision avoidance support (for left/right turning vehicles) will not operate
when the turn signal lights are not flashing.
● Intersection collision avoidance support (crossing vehicles)
● Acceleration Suppression at Low Speed
The Acceleration Suppression at Low Speed function will not operate when the turn signal
lights are flashing.
While the Acceleration Suppression at Low Speed function is operating, if any of the follow-
ing are performed, the low speed sudden acceleration suppression function operation will
Detectable objects Vehicle speed
Oncoming vehicle
speed
Relative speed
between your vehi-
cle and object
Oncoming vehicles
Approximately 3 to
25 mph (5 to 40
km/h)
Approximately 3 to
45 mph (5 to 75
km/h)
Approximately 7 to
70 mph (10 to 115
km/h)
Pedestrians
Approximately 3 to
20 mph (5 to 30
km/h)
-
Approximately 3 to
25 mph (5 to 40
km/h)
Bicycles
Approximately 3 to
20 mph (5 to 30
km/h)
-
Approximately 3 to
30 mph (5 to 50
km/h)
Oncoming motorcy-
cles
Approximately 3 to
25 mph (5 to 40
km/h)
Approximately 3 to
45 mph (5 to 75
km/h)
Approximately 7 to
70 mph (10 to 115
km/h)
Detectable objects Vehicle speed
Crossing vehicle
speed
Relative speed
between your vehi-
cle and object
Vehicles, Motorcy-
cles (side)
Approximately 3 to
38 mph (5 to 60
km/h)
• Your vehicle
speed or less
• Approximately 25
mph or less (40
km/h or less)
Approximately 3 to
38 mph (5 to 60
km/h)
Detectable objects Vehicle speed
Relative speed between your
vehicle and object
Preceding vehicles, stopped
vehicles, Pedestrians, Bicy-
cles, Wall
Approximately 0 to 9 mph
(0 to 15 km/h)
Approximately 0 to 9 mph
(0 to 15 km/h)
228
4-5. Using the driving support systems
be cancelled:
• The accelerator pedal is released.
• The steering wheel is operated heavily or suddenly
■ Detection of detectable objects
Objects are detected based on their size,
shape, and movement.
Depending on the ambient brightness,
movement, posture and direction of a
detectable object, it may not be detected
and the system may not operate properly.
The system detects shapes, such as the fol-
lowing, as detectable objects.
■ Situations in which the system may
operate even though the possibility of a
collision is not high
● In certain situations, such as the following,
the system may determine that the possi-
bility of a collision is high and operate:
• When passing a detectable object
• When changing lanes while overtaking a
detectable object
• When suddenly approaching a detect-
able object
• When approaching a detectable object
or other object on the roadside, such as
guardrails, utility poles, trees, walls, etc.
• When there is a detectable object or
other object by the roadside at the
entrance of a curve
• When there are patterns or a painting
ahead of the vehicle that may be mis-
taken for a detectable object
• When passing a detectable object that is
changing lanes or turning left/right
• When passing a detectable object which
is stopped to make a left/right turn
• When a detectable object stops immedi-
ately before entering the path of the vehi-
cle
• When passing through a location with a
structure above the road (traffic sign, bill-
board, etc.)
• When approaching an electric toll gate
barrier, parking lot barrier, or other bar-
rier that opens and closes
• When turning left/right and an oncoming
vehicle, oncoming motorcycle, pedes-
trian or bicycle crosses in front of the
vehicle
• When attempting to turn left/right in
front of an oncoming vehicle, oncoming
motorcycle, pedestrian or bicycle
• When turning left/right and an oncoming
229
4-5. Using the driving support systems
4
Driving
vehicle, oncoming motorcycle, pedes-
trian or bicycle stops or changes course
immediately before entering the path of
the vehicle
• When turning left/right and an oncoming
vehicle turns left/right in front of the vehi-
cle
• When the steering wheel is operated
toward the path of an oncoming vehicle
• When there is an object moving above or
under the road
■ Situations in which the system may not
operate properly
● In certain situations, such as the following,
a detectable object may not be detected
by the front sensors, and the system may
not operate properly:
• When a detectable object is approaching
your vehicle
• When your vehicle or a detectable object
is wandering
• When a detectable object makes an
abrupt maneuver (such as sudden swerv-
ing, acceleration or deceleration)
• When suddenly approaching a detect-
able object
• When the detectable object is near a
wall, fence, guardrail, manhole cover,
steel plate on the road surface, or
another vehicle
• When there is a structure above a
detectable object
• When part of a detectable object is hid-
den by another object (large luggage,
umbrella, guardrail, etc.)
• When multiple detectable objects are
overlapping
• When a bright light, such as the sun, is
reflecting off of a detectable object
• When a detectable object is white and
looks extremely bright
• When the color or brightness of a detect-
able object causes it to blend in with its
surroundings
• When a detectable object cuts in front of
or suddenly emerges in front of your
vehicle
• When approaching a vehicle which is
diagonal
• If a bicycle is a child sized bicycle, is car-
rying a large load, is carrying an extra
passenger, is carrying a forward leaning
rider, or has an unusual shape (bicycles
equipped with a child seat, tandem bicy-
cles, etc.)
• If a pedestrian or bicycle is shorter than
approximately 3.2 ft. (1 m) or taller than
approximately 6.5 ft. (2 m).
• When the silhouette of a pedestrian or
bicycle is unclear (such as when they are
wearing a raincoat, long skirt, etc.)
• When a pedestrian is bending forward or
squatting
• When a pedestrian or bicycle is moving
at high speed
• When a pedestrian is pushing a stroller,
wheelchair, bicycle or other vehicle
• When a detectable object blends in with
the surrounding area, such as when it is
dim (at dawn or dusk) or dark (at night or
in a tunnel)
• When the vehicle has not been driven for
a certain amount of time after the hybrid
system was started
• While turning left/right or a few seconds
after turning left/right
• While driving around a curve and a few
seconds after driving around a curve
• When turning left/right and an oncoming
vehicle is driving in a lane 3 or more lanes
from the vehicle
• When turning left/right and the direction
of the vehicle differs greatly from the
direction traffic flows in the oncoming
lane
230
4-5. Using the driving support systems
• When turning left/right, a pedestrian or
bicycle behind the vehicle comes in front
of it as if it overtakes the vehicle
• When at an intersection, the approaching
crossing vehicle is long in overall length,
such as a large truck, towing trailer, etc.
● In addition to the preceding, in certain sit-
uations, such as the following, the emer-
gency steering assist may not operate
properly:
• When a detectable object is too close to
the vehicle
• When there is insufficient space to per-
form evasive steering maneuvers or an
obstruction exists in the evasion direction
• When there is an oncoming vehicle
● In addition to the preceding, in certain sit-
uations, such as the following, walls may
not be detected as a target object and the
Acceleration Suppression at Low Speed
function may not operate properly:
• When scenery behind the wall is visible,
such as a glass door, grid fence, etc.
• When the wall is slanted or low
• When the wall is narrow, such as a pole,
etc.
• When the wall is made of plants, such as a
hedge, etc.
• When the road, etc. is reflected on the
wall
• When the vehicle is approaching the wall
at an angle
The pre-collision system can be
enabled/disabled through a cus-
tomize setting. (P.466)
The system is enabled each time the power
switch is turned to ON.
When the system is disabled, the
PCS warning light will illuminate
and a message will be displayed on
the multi-information display.
The pre-collision setting can be
changed on the customize settings.
(P.466)
When the pre-collision warning tim-
ing is changed, the emergency
steering assist timing will also be
changed.
When “Later” is selected, the emer-
gency steering assist will not oper-
ate in most cases.
When the dynamic radar cruise
control is operating, the pre-colli-
sion warning will operate at the
“Earlier” timing, regardless of the
user setting.
Changing the pre-collision set-
ting
231
4-5. Using the driving support systems
4
Driving
When driving on a road with clear
lane lines with the dynamic radar
cruise control operating, lane lines
and preceding and surrounding
vehicles are detected using the front
camera and radar sensor, and the
steering wheel is operated to main-
tain the vehicle’s lane position.
Use this function only on highways and
expressways.
If the dynamic radar cruise control is not
operating, the function will not operate.
In situations where the lane lines are diffi-
cult to see or are not visible, such as when
in a traffic jam, support will be provided
using the path of preceding and surround-
ing vehicles.
If the system determines that the steering
wheel has not been operated for a certain
amount of time or the steering wheel is not
being firmly gripped, the driver will be
alerted and this function will be temporarily
canceled.
If the steering wheel is firmly gripped, the
function will begin operating again.
When the function is operating, if
the vehicle is likely to depart from its
lane, the driver will be alerted via a
display and buzzer.
When the buzzer sounds, check the area
around the vehicle and carefully operate
the steering wheel to move the vehicle
back to the center of the lane.
LTA (Lane Tracing Assist)
LTA functions
232
4-5. Using the driving support systems
■ Operating conditions of function
This function is operable when all of the fol-
lowing conditions are met:
● The LTA system detects lane lines or the
path of preceding or surrounding vehi-
cles.
● The dynamic radar cruise control is oper-
ating.
● The lane width is approximately 10 to 13
ft. (3 to 4 m).
● The turn signal lever is not being oper-
ated.
● The vehicle is not being driven around a
sharp curve.
● The vehicle is not accelerating or decel-
erating more than a certain amount.
● The steering wheel is not being turned
with a large force.
● The hands off steering wheel warning
(P.232) is not operating.
● The vehicle is being driven in the center
of a lane.
■ Temporary cancelation of functions
● When the operating conditions are no
longer met, a function may be temporar-
ily canceled. However, when the opera-
tion conditions are met again, operation
of the function will automatically be
restored. (P.232)
● If the operating conditions of a function
are no longer met while the function is
operating, a buzzer may sound to indi-
cate that the function has been temporar-
ily canceled.
● The steering assist operation of the func-
tion can be overridden by the steering
wheel operation of the driver.
■ Lane departure warning function when
the LTA is operating
● Even if the LDA warning method is
changed to vibration of the steering
wheel, if the vehicle deviates from the
lane while the LTA is operating, the warn-
ing buzzer will sound to alert the driver.
● If steering wheel operation equivalent to
that necessary for a lane change is
detected, the system will determine the
vehicle is not deviating from the lane and
the warning will not operate.
■ Hands off steering wheel warning oper-
ation
● When the system determines the driver is
not holding the steering wheel, a mes-
WARNING
■ Before using the LTA system
● Do not overly rely on the LTA system.
The LTA system is not a system which
provides automated assistance in driv-
ing and it is not a system which
reduces the amount of attention nec-
essary for safe driving. The driver is
solely responsible for paying attention
to their surroundings and operating
the steering wheel as necessary to
ensure safety. Also, the driver is
responsible for taking adequate
breaks when fatigued, such as when
driving for a long time.
● Failure to perform appropriate driving
operations and pay careful attention
may lead to an accident.
● When not using the LTA system, turn it
off using the LTA switch.
233
4-5. Using the driving support systems
4
Driving
sage urging the driver to grip the steering
wheel and the icon shown in the illustra-
tion will be displayed on the multi-infor-
mation display to warn the driver. If the
system detects that the steering wheel is
held, the warning will be canceled. When
using the system, make sure to grip the
steering wheel firmly, regardless of
whether the warning is operating or not.
● If no operations are detected for a certain
amount of time, the warning will operate
and the function will be temporarily can-
celed. This warning may also operate if
the driver only operates steering wheel a
small amount continuously.
■ Situations in which the hands off steer-
ing wheel warning may not operate
properly
● Depending on the condition of the vehi-
cle, handle control condition and road
surface, the warning function may not
operate.
The LTA will change between
ON/OFF each time the LTA switch is
pressed.
When the LTA is ON, the LTA indicator
will illuminate.
Enabling/disabling the system
WARNING
■ Situations in which the functions may
not operate properly
In the following situations, the functions
may not operate properly and the vehi-
cle may depart from its lane. Do not
overly rely on these functions. The driver
is solely responsible for paying attention
to their surroundings and operating the
steering wheel as necessary to ensure
safety.
● When a preceding or surrounding
vehicle changes lanes (Your vehicle
may follow the preceding or surround-
ing vehicle and also change lanes)
● When a preceding or surrounding
vehicle is swaying (Your vehicle may
sway accordingly and depart from the
lane)
● When a preceding or surrounding
vehicle departs from a lane (Your
vehicle may follow the preceding or
surrounding vehicle and also depart
from the lane)
234
4-5. Using the driving support systems
The operating state of the LTA system is indicated.
WARNING
● When a preceding or surrounding
vehicle is being driven extremely close
to the left/right lane line (Your vehicle
may follow the preceding or surround-
ing vehicle accordingly and depart
from the lane)
● When there are moving objects or
structures in the surrounding area
(Depending on the position of the
moving object or structure relative to
your vehicle, your vehicle may sway)
● When the vehicle is struck by a cross-
wind or the turbulence of other nearby
vehicles
● Situations in which the sensors may not
operate properly: P.218
● Situations in which the lane may not be
detected: P.220
● When it is necessary to disable the sys-
tem: P.215
Operation display of steering wheel operation support
Indicator Lane display Steering icon Situation
White Gray/White Gray
LTA is on standby
Green Green Green
LTA is operating
Yellow
Flashing
Yellow
Flashing
Green
The vehicle is depart-
ing the lane toward
the side which the
lane display is flash-
ing
235
4-5. Using the driving support systems
4
Driving
The LDA system warns the driver if the
vehicle may deviate from the current
lane or course
*
, and also can slightly
operate the steering wheel to help
avoid deviation from the lane or
course
*
.
The front camera is used to detect lane
lines or a course
*
.
*
: Boundary between the asphalt and
grass, soil, etc., or structures, such as a
curb, guardrail, etc.
■ Lane departure alert function
When the system determines that the
vehicle might depart from its lane or
course
*
, a warning is displayed on a
display, and either a warning buzzer
will sound or the steering wheel will
vibrate to alert the driver.
Check the area around your vehicle and
carefully operate the steering wheel to
move the vehicle back to the center of the
lane or course
*
.
If the system determines that the vehicle
may collide with a vehicle in an adjacent
lane, the lane departure alert will operate
even if the turn signals are operating.
*
: Boundary between the asphalt and
grass, soil, etc., or structures, such as a
curb, guardrail, etc.
■ Lane departure prevention func-
tion
If the system determines that the vehi-
cle is likely to depart from its lane or
course
*
, it provides assistance through
steering wheel operations to help
avoid deviation from the lane or
course.
If the system determines that the steering
wheel has not been operated for a certain
amount of time or the steering wheel is not
being firmly gripped, a warning message
may be displayed and a warning buzzer
may sound to alert the driver.
If the system determines that the vehicle
may collide with a vehicle in an adjacent
lane, the lane departure prevention func-
tion will operate even if the turn signals are
operating.
*
: Boundary between the asphalt and
grass, soil, etc., or structures, such as a
curb, guardrail, etc.
LDA (Lane Departure Alert)
Basic functions
236
4-5. Using the driving support systems
■ Break suggestion function
If the vehicle is swaying, a message will
be displayed and a buzzer will sound to
urge the driver to take a break.
■ Operating conditions of each function
● Lane departure alert/prevention function
This function is operable when all of the fol-
lowing conditions are met:
• The vehicle speed is approximately 30
mph (50 km/h) or more.
Operation may be possible when the vehi-
cle speed is approximately 25 mph (40
km/h) or more if vehicles, motorcycles,
bicycles, or pedestrians are detected near
the lane.
• The system recognizes a lane or course
*
.
(When recognized on only one side, the
system will operate only for the recog-
nized side.)
• The lane width is approximately 9.8 ft. (3
m) or more.
• The turn signal lever is not being oper-
ated.
(Except when a vehicle is detected in the
direction that the turn signal lever is oper-
ated.)
• The vehicle is not being driven around a
sharp curve.
• The vehicle is not accelerating or decel-
erating more than a certain amount.
• The steering wheel is not being turned
sufficiently to perform a lane change.
WARNING
■ Before using the LDA system
● Do not overly rely on the LDA system.
The LDA system is not a system which
provides automated assistance in driv-
ing and it is not a system which
reduces the amount of attention nec-
essary for safe driving. The driver is
solely responsible for paying attention
to their surroundings and operating
the steering wheel as necessary to
ensure safety. Also, the driver is
responsible for taking adequate
breaks when fatigued, such as when
driving for a long time.
● Failure to perform appropriate driving
operations and pay careful attention
may lead to an accident.
237
4-5. Using the driving support systems
4
Driving
• When the VSC or TRAC system is not
turned off
*
: Boundary between the asphalt and grass,
soil, etc., or structures, such as a curb,
guardrail, etc.
■ Temporary cancellation of functions
When the operating conditions are no lon-
ger met, a function may be temporarily can-
celed. However, when the operation
conditions are met again, operation of the
function will automatically be restored.
(P.236)
■ Operation of the lane departure alert
function/lane departure prevention
function
● Depending on the vehicle speed, road
conditions, lane departure angle, etc.,
operation of the lane departure preven-
tion function may not be felt or the func-
tion may not operate.
● Depending on the conditions, the warn-
ing buzzer may operate even if vibration
is selected through a customize setting.
● If a course
*
is not clear or straight, the
lane departure alert function or lane
departure prevention function may not
operate.
● The lane departure alert function or lane
departure prevention function may not
operate if the system judges that the vehi-
cle is intentionally being steered to avoid
a pedestrian or parked vehicle.
● It may not be possible for the system to
judge if there is danger of a collision with
a vehicle in an adjacent lane.
● The steering assist operation of the lane
departure prevention function can be
overridden by the steering wheel opera-
tion of the driver.
*
: Boundary between the asphalt and grass,
soil, etc., or structures, such as a curb,
guardrail, etc.
■ Hands off steering wheel warning oper-
ation
In the following situations, a message urging
the driver to operate the steering wheel and
an icon will be displayed and a buzzer will
sound to warn the driver. When using the
system, make sure to grip the steering
wheel firmly, regardless of whether the
warning is operating or not.
● When the system determines that the
driver is not securely holding the steering
wheel, or the steering wheel is not being
operated when the steering assist opera-
tion of the lane departure prevention
function is operating
Except for Puerto Rico: The length of time
that the warning buzzer operates will
become longer as the frequency of the
steering assist operating increases. If the
system judges that the steering wheel has
been operated, the warning buzzer will
stop.
For Puerto Rico: The length of time that the
warning buzzer operates will become lon-
ger as the frequency of the steering assist
operating increases. Even if the system
judges that the steering wheel has been
operated, the warning buzzer will sound for
a certain amount of time.
■ Break suggestion function
This function is operable when all of the fol-
lowing conditions are met:
● The vehicle speed is approximately 40
mph (65 km/h) or more.
*1
● The vehicle speed is approximately 32
mph (50 km/h) or more.
*2
● The lane width is approximately 9.8 ft. (3
m) or more.
Depending on the condition of the vehicle
and road surface, the break suggestion
function may not operate.
238
4-5. Using the driving support systems
Press the meter control switch to turn
off the message.
Unless is pressed, the message of the
break suggestion function will remain dis-
played.
*1
: For Puerto Rico
*2
: Except for Puerto Rico
The LDA system can be
enabled/disabled through a cus-
tomize setting. (P.466)
The settings of the LDA can be
changed on the customize settings.
(P.466)
The operating state of the lane departure alert function and steering assist opera-
tion of the lane departure prevention function are indicated.
Except for Puerto Rico
Changing LDA settings
WARNING
■ Situations in which the system may
not operate properly
In the following situations, the system
may not operate properly and the vehi-
cle may depart from its lane. Do not
overly rely on these functions. The driver
is solely responsible for paying attention
to their surroundings and operating the
steering wheel as necessary to ensure
safety.
● When the boundary between the
asphalt and grass, soil, etc., or struc-
tures, such as a curb, guardrail, etc. is
not clear or straight
● When the vehicle is struck by a cross-
wind or the turbulence of other nearby
vehicles
● Situations in which the lane may not be
detected: P.220
● Situations in which the sensors may not
operate properly: P.218
● Situations in which some or all of the
functions of the system cannot oper-
ate: P.220
● When it is necessary to disable the sys-
tem: P.215
Displays and system operation
Indicator Lane display Steering icon Condition
Not illuminated Not illuminated Not illuminated System disabled
White Gray
Not illuminated
Lane lines are not detected by the
system
239
4-5. Using the driving support systems
4
Driving
For Puerto Rico
White White
Not illuminated
Lane lines are detected by the sys-
tem
Yellow
Flashing
Yellow
Flashing
Not illuminated
Lane departure alert function is
operating for the side which the lane
display is flashing
Green Green Green
Lane departure prevention function
is operating for the side which the
lane display is illuminated
Yellow
Flashing
Yellow
Flashing
Green
Lane departure alert function/lane
departure prevention function is
operating for the side which the lane
display is flashing
Indicator Lane display Steering icon Situation
Yellow
Illuminated
Not illuminated Not illuminated System disabled
Not illuminated
Gray
Not illuminated
Lane lines are not detected by the
system
Not illuminated
White
Not illuminated
Lane lines are detected by the sys-
tem
Yellow
Flashing
Yellow
Flashing
Not illuminated
Lane departure alert function is
operating for the side which the lane
display is flashing
Indicator Lane display Steering icon Condition
240
4-5. Using the driving support systems
Green
Green Green
Lane departure prevention function
is operating for the side which the
lane display is illuminated
Yellow
Flashing
Yellow
Flashing
Green
Lane departure alert function/lane
departure prevention function is
operating for the side which the lane
display is flashing
Indicator Lane display Steering icon Situation
241
4-5. Using the driving support systems
4
Driving
According to the driving conditions, the operation and detectable objects of the
proactive driving assist will change as follows.
PDA (Proactive driving
a
ssist)
When a detectable object
(P.241) is detected, the proac-
tive driving assist operates the
brakes and steering wheel to help
prevent the vehicle from approach-
ing too close to the object.
WARNING
■ For safe use
Driving safely is solely the responsibility
of the driver.
● The proactive driving assist is
designed to provide some assistance
for regular braking and steering oper-
ations, as well as helping to prevent the
vehicle from approaching too close to
a detectable object. However, the
scope of this assistance is limited.
The driver should perform brake and
steering operations as necessary. Read
the following items carefully. Do not
overly rely on the proactive driving assist
and always drive carefully. (P.243)
● The proactive driving assist is not a
system which reduces the amount of
attention necessary for safe driving.
Even if the system is operating cor-
rectly, the surrounding conditions as
recognized by the driver and detected
by the system may differ. It is neces-
sary for the driver to pay attention,
assess risks, and ensure safety. Over-
reliance on this system to drive the
vehicle safely may lead to an accident
resulting in death or serious injury.
● Proactive driving assist is not a system
which allows for inattentive driving and
is not a system which assists in poor
visibility conditions. The driver is solely
responsible for paying attention to
their surroundings and driving safely.
■ When turning proactive driving assist
off
● Situations in which the sensors may not
operate properly: P.218
● When it is necessary to disable the sys-
tem: P.215
System operating conditions and detectable objects
242
4-5. Using the driving support systems
Function Conditions Operation Detectable objects
Obstacle Anticipa-
tion Assist (OAA)
A detectable object
is detected crossing
the road
Assistance with some
brake operations is
provided in order to
reduce the possibility
of a collision.
Pedestrians
Bicyclists
A detectable object
is detected on the
side of the road
Assistance with some
brake and steering
wheel operations are
provided according
to the surrounding
conditions to help
prevent the vehicle
from approaching
too close to a
detected object.
Pedestrians
Bicyclists
Parked vehicles
Assistance with
steering wheel oper-
ations is provided
within a range that
the vehicle will not
deviate from its cur-
rent lane.
Deceleration Assist
(DA)
A preceding vehicle
or an adjacent vehi-
cle cutting in front of
the vehicle is
detected
The vehicle is gently
decelerated so that
the vehicle-to-vehi-
cle distance will not
be excessively short.
Preceding vehicles
Motorcycles
A curve is detected
ahead of the vehicle
The vehicle is gently
decelerated if the
vehicle speed is
determined to be too
high for the curve
ahead.
None
Steering Assist (SA) Lane is detected
The system antici-
pates the driver’s
operation and sup-
ports the operation of
the steering wheel.
None
243
4-5. Using the driving support systems
4
Driving
■ Vehicle speeds at which the system can
operate
● Detectable object crossing the road
assistance
Approximately 20 to 35 mph (30 to 60
km/h)
● Detectable object on the side of the road
assistance
Approximately 20 to 35 mph (30 to 60
km/h)
● Preceding vehicle deceleration assis-
tance
Approximately 15 mph (20 km/h) or more
● Curve deceleration assistance
Approximately 15 mph (20 km/h) or more
● Steering assist within a lane
Approximately 5 to 80 mph (10 to 140
km/h)
■ System operation will be canceled when
● In the following situations, system opera-
tion will be canceled:
• When the dynamic radar cruise control
or cruise control is operating
• When the PCS is off
• Situations in which some or all of the
functions of the system cannot operate:
P.220
• When the P, R or N shift position is
selected
• The driver’s seat belt is unfastened
● In the following situations, the brake
operation assist will be canceled:
• Approximately 9 mph (15 km/h) or less
• When a certain vehicle speed has been
reached, as judged by the system,
according to the surrounding conditions
● In the following situations, system opera-
tion may be canceled:
• When the brake control or output
restriction control of a driving support
system operates (For example: PCS,
drive-start control)
• When the system determines that a
detected object has moved away from
the vehicle
• When lane lines can no longer be
detected
• When the brake pedal has been
depressed
• When the accelerator pedal has been
depressed
• When the steering wheel has been oper-
ated with more than a certain amount of
force
• When the turn signal lever is operated to
the left/right turn position
WARNING
■ Situations in which the system may
not operate properly
● Situations in which the lane may not be
detected: P.220
● When a detectable object stops
immediately before entering the path
of the vehicle
● When passing extremely close to a
detectable object behind a guardrail,
fence, etc.
● When changing lanes while overtak-
ing a detectable object
● When passing a detectable object that
is changing lanes or turning left/right
● When there are objects (guardrails,
power poles, trees, walls, fences,
poles, traffic cones, mailboxes, etc.) in
the surrounding area
● When there are patterns or a painting
ahead of the vehicle that may be mis-
taken for a detectable object
● When passing through a place with a
low structure above the road (tunnel
with a low ceiling, traffic sign, sign-
board, etc.)
● When driving on snowy, icy, or rutted
roads
● When a detectable object is
approaching your vehicle
● When your vehicle or a detectable
object is wandering
244
4-5. Using the driving support systems
The proactive driving assist can be
enabled/disabled through a cus-
tomize setting. (P.467)
The following settings of the proac-
tive driving assist can be changed
through customize settings.
(P.467)
WARNING
● When the movement of a detectable
object changes (change in direction,
sudden acceleration or deceleration,
etc.)
● When suddenly approaching a detect-
able object
● When a preceding vehicle or motor-
cycle is not directly in front of your
vehicle
● When there is a structure above a
detectable object
● When part of a detectable object is
hidden by another object (large lug-
gage, umbrella, guardrail, etc.)
● When multiple detectable objects are
overlapping
● When a bright light, such as the sun or
headlights of another vehicle, is
reflecting off of the detectable object
● When the detectable object is white
and looks extremely bright
● When the color or brightness of the
detectable object causes it to blend in
with its surroundings
● When a detectable object cuts in front
of or emerges from beside a vehicle
● When approaching a vehicle ahead
which is perpendicular or at an angle
to the vehicle, or is facing the vehicle
● If a parked vehicle is perpendicular or
at an angle to the vehicle
● When a bicycle is a child sized bicycle,
is carrying a large load, is carrying an
extra passenger, or has an unusual
shape (bicycles equipped with a child
seat, tandem bicycles, etc.)
● When a pedestrian or bicyclist is
shorter than approximately 3.2 ft. (1 m)
or taller than approximately 6.5 ft. (2
m)
● When the silhouette of a pedestrian or
bicyclist is unclear (such as when they
are wearing a raincoat, long skirt, etc.)
● When a pedestrian or bicyclist is
bending forward or squatting
● When a pedestrian or bicyclist is mov-
ing at high speed
● When a pedestrian is pushing a
stroller, wheelchair, bicycle or other
vehicle
● When a detectable object blends in
with the surrounding area, such as
when it is dim (at dawn or dusk) or
dark (at night, in a tunnel, etc.)
● When the lane width is 13.1 ft. (4 m) or
more
● When the lane width is 8.2 ft. (2.5 m)
or less
● When the vehicle has not been driven
for a certain amount of time after the
hybrid system was started
● While turning left or right or a few sec-
onds after turning left or right
● While changing lanes or a few sec-
onds after changing lanes
● When entering a curve, driving around
a curve and a few seconds after driving
around a curve
Changing proactive driving
assist settings
245
4-5. Using the driving support systems
4
Driving
Depending on the situation, the following indicators or icons will be displayed.
Some icons cannot be displayed unless the display is changed to the driving safety
support function information screen.
■ Hands off steering wheel warning oper-
ation
In the following situations, a message urging
the driver to grip the steering wheel and the
icon shown in the illustration will be dis-
played on the display to warn the driver. If
the system detects that the steering wheel is
held, the warning will be canceled. When
using the system, make sure to grip the
steering wheel firmly, regardless of whether
the warning is operating or not.
System operation display
Icon Meaning
White: Monitoring for detectable objects
Green: Detectable object crossing the
road or detectable object on the side of
the road assistance operating
A pedestrian has been detected as crossing
the road or on the side of the road and brake
or steering assistance is operating
A vehicle has been detected on the side of
the road and brake or steering operation
assistance is being performed
Steering operation assistance is being
performed to prevent the vehicle from
approaching too close to a detectable
object on the side of the road
When the steering assist is operating
Preceding vehicle deceleration assistance is
being performed
Warning to maintain appropriate vehicle-to-
vehicle distance
Curve deceleration assistance is being per-
formed
246
4-5. Using the driving support systems
● When assistance to a detectable object
crossing the road or assistance to a
detectable object on the side of the road
is performed and the system determines
the driver is not holding the steering
wheel
If no operations are detected for a certain
amount of time, a buzzer will sound, the
warning will operate. This warning may also
operate if the driver only operates steering
wheel a small amount continuously.
■ Warning operation after preceding
vehicle deceleration assistance has
ended
After preceding vehicle deceleration assis-
tance has ended, if the driver does not
operate the brake pedal or accelerator
pedal and the vehicle approaches the pre-
ceding vehicle, the display will flash and a
buzzer will sound to urge the driver to
decelerate. If the system determines that
the driver is operating the brake pedal or
accelerator pedal, the warning will be can-
celed.
*
: If equipped
When the front camera detects a
sign or information of a sign is avail-
able from the navigation system, the
sign will be displayed on the display.
Multiple signs can be displayed.
Depending on the specifications of the
RSA (Road Sign Assist)
*
The RSA system detects specific
road signs using the front camera
and/or navigation system (when
speed limit information is available)
and warns the driver via displays
and buzzers.
WARNING
■ For safe use
● Driving safely is solely the responsibil-
ity of the driver. Pay careful attention
to the surrounding conditions in order
to ensure safe driving.
● Do not rely solely upon the RSA. The
RSA assists the driver by providing
road sign information, but it is not a
replacement for the driver’s own vision
and awareness. Driving safely is solely
the responsibility of the driver. Pay
careful attention to the surrounding
conditions in order to ensure safe driv-
ing.
■ Situations in which the RSA should
not be used
When it is necessary to disable the sys-
tem: P.215
■ Situations in which the system may
not operate properly
● Situations in which the sensors may not
operate properly: P.218
Display Function
247
4-5. Using the driving support systems
4
Driving
vehicle, the number of displayed signs may
be limited.
■ Operating conditions of sign display
Signs will be displayed when the following
conditions are met:
● The system has detected a sign
In the following situations, a displayed sign
may stop being displayed:
● When a new sign has not been detected
for a certain distance
● When the system determines that the
road being driven on has changed, such
as after a left or right turn
■ Situations in which the display function
may not operate properly
In the following situations, the RSA system
may not operate properly and may not
detect signs or may display the incorrect
sign. However, this does not indicate a mal-
function.
● When a sign is dirty, faded, tilted or bent
● When the contrast of an electronic sign is
low
● When all or part of a sign is hidden by a
tree, utility pole, etc.
● When a sign is detected by the front
camera for a short amount of time
● When the driving state (turning, chang-
ing lanes, etc.) is judged incorrectly
● When a sign is immediately after a free-
way junction or in an adjacent lane just
before merging
● When stickers are attached to the rear of
a preceding vehicle
● When a sign similar to a system compati-
ble sign is detected as a system compati-
ble sign
● When a speed limit sign for a frontage
road is within detection range of the front
camera
● When driving around a roundabout
● When a sign intended for trucks, etc. is
detected
● When a sign has a supplemental sign
(end point, day of week, time of day, etc.)
● When there is a sign within a traffic
restricted area, such as a roadworks area
● When the navigation system map data is
out of date
● When the navigation system cannot be
used
In this case, the speed limit signs displayed
on the multi-information display and navi-
gation system display may differ.
In the following situations, the RSA sys-
tem will output a warning to notify the
driver.
If the vehicle speed exceeds the
speed warning threshold of the
speed limit sign displayed on the
display, the sign display will be
emphasized and a buzzer will
sound.
When the RSA system detects a do
not enter sign and determines that
the vehicle has entered a no-entry
area, the do not enter sign displayed
on the display will flash and a buzzer
will sound.
■ Operating conditions of the notification
functions
● Excess speed notification function
This function will operate when the follow-
ing condition is met:
• A speed limit road sign is recognized by
the system.
● No entry notification function
This function will operate when all of the fol-
lowing conditions are met:
• More than one no entry road signs are
recognized by the system simultaneously.
• The vehicle is passing between no entry
Notification function
248
4-5. Using the driving support systems
road signs recognized by the system.
The following types of road signs
can be displayed.
However, non-standard or recently intro-
duced traffic signs may not be displayed.
Depending on the specifications of
the vehicle, signs may be displayed
overlapping.
The following settings of the RSA
can be changed through customize
settings. (P.467)
Types of road signs supported
Speed limit
Do Not Enter
No U-turn
No Turn On Red
Stop
Yield
Warning
Changing RSA settings
249
4-5. Using the driving support systems
4
Driving
Dynamic radar cruise con-
trol
This dynamic radar cruise control
detects the presence of vehicles
ahead, determines the current
vehicle-to-vehicle distance, and
operates to maintain a suitable dis-
tance from the vehicle ahead. The
desired vehicle-to-vehicle dis-
tance can be set by operating the
vehicle-to-vehicle distance switch.
Use the dynamic radar cruise con-
trol only on highways and express-
ways.
WARNING
■ For safe use
● Driving safely is solely the responsibil-
ity of the driver. Do not overly rely on
this system, and pay careful attention
to the surrounding conditions in order
to ensure safe driving.
● The dynamic radar cruise control pro-
vides driving assistance to reduce the
driver’s burden. However, there are
limitations to the assistance provided.
Read the following items carefully. Do
not overly rely on this system and always
drive carefully.
Conditions under which the system may
not operate correctly: P.255
● Set the speed appropriately according
to the speed limit, traffic flow, road
conditions, weather conditions, etc.
The driver is responsible for confirm-
ing the set speed.
● Even if the system is operating cor-
rectly, the condition of a preceding
vehicle as recognized by the driver
and detected by the system may differ.
Therefore, it is necessary for the driver
to pay attention, assess risks, and
ensure safety. Over-reliance on this
system to drive the vehicle safely may
lead to an accident resulting in death
or serious injury.
■ Precautions for the driving assist sys-
tems
Observe the following precautions, as
there are limitations to the assistance
provided by the system. Over-reliance
on this system may lead to an accident
resulting in death or serious injury.
● Details of support provided for the
driver’s vision
The dynamic radar cruise control is only
intended to help the driver in determin-
ing the distance between the driver’s
own vehicle and a designated preceding
vehicle. It is not a system which allows for
careless or inattentive driving, and is not
a system which assists in poor visibility
conditions.
The driver must pay attention to their
surroundings, even when the vehicle
stops.
● Details of support provided for the
driver’s judgement
The dynamic radar cruise control deter-
mines whether the distance between the
driver’s own vehicle and a designated
preceding vehicle is within a set range. It
is not capable of making any other type
of judgement. Therefore, it is absolutely
necessary for the driver to remain vigi-
lant and to determine whether or not
there is a possibility of danger.
● Details of support provided for the
driver’s operation
250
4-5. Using the driving support systems
WARNING
The dynamic radar cruise control does
not include functions which will prevent
or avoid collisions with vehicles ahead of
your vehicle. Therefore, if there is ever
any possibility of danger, the driver must
take immediate and direct control of the
vehicle and act appropriately in order to
ensure safety.
■ Situations in which the dynamic radar
cruise control should not be used
Do not use the dynamic radar cruise
control in the following situations. As the
system will not be able to provide appro-
priate control, using it may lead to an
accident resulting in death or serious
injury.
● Roads where there are pedestrians,
cyclists, etc.
● When driving on a highway or
expressway entrance or exit
● When the approach warning sounds
frequently
● Situations in which the sensors may not
operate properly: P.218
● When it is necessary to disable the sys-
tem: P.215
251
4-5. Using the driving support systems
4
Driving
Constant speed cruising:
When there are no vehicles ahead
The vehicle drives at the speed set by the driver.
If the set vehicle speed is exceeded while driving down a hill, the set vehicle speed display
will blink and a buzzer will sound.
Deceleration and follow-up cruising
When a preceding vehicle driving slower than the set vehicle speed is detected
When a vehicle is detected driving ahead of your vehicle, the vehicle automatically decel-
erates and if a greater reduction in vehicle speed is necessary, the brakes are applied (the
stop lights will come on at this time). The vehicle is controlled to maintain the vehicle-to-
vehicle distance set by the driver, in accordance with changes in the speed of the preced-
ing vehicle. If vehicle deceleration is not sufficient and the vehicle approaches the vehicle
ahead, the approach warning will sound.
Acceleration
When there are no longer any preceding vehicles driving slower than the set
vehicle speed
The vehicle accelerates until the set vehicle speed is reached and then resumes constant
speed cruising.
Starting off:
If a preceding vehicle stops, the vehicle will also stop (controlled stop). After the
Basic functions
A
B
C
D
252
4-5. Using the driving support systems
preceding vehicle starts off, pressing the “RES” switch or depressing the accelera-
tor pedal will resume follow-up cruising (start off operation). If a start off operation
is not performed, the controlled stop will continue.
■ Meter display
Multi-information display
Set vehicle speed
Indicators
■ Switches
Driving assist mode select switch
Driving assist switch
“+” switch/“RES” switch
“-” switch
Cancel switch
Vehicle-to-vehicle distance switch
■ Setting the vehicle speed
1 Press the driving assist mode select
switch to select Adaptive Cruise
Mode.
The dynamic radar cruise control indicator
will illuminate.
2 Using the accelerator pedal, accel-
erate or decelerate to the desired
vehicle speed (approximately 20
mph [30 km/h] or more), and press
the driving assist switch to set the
set vehicle speed.
The set vehicle speed will be displayed on
the multi-information display.
The vehicle speed at the moment the
switch is released will be the set vehicle
System components
A
B
C
A
B
C
D
E
F
Using the dynamic radar cruise
control
253
4-5. Using the driving support systems
4
Driving
speed.
■ Adjusting the set vehicle speed
Adjusting the set vehicle speed
using the switches
To change the set vehicle speed, press
the “+” switch or “-” switch until the
desired speed is displayed.
1 Increase set vehicle speed
2 Decrease set vehicle speed
Short press adjustment: Press the switch
Long press adjustment: Press and hold the
switch until the desired set vehicle speed is
reached.
The set vehicle speed will increase or
decrease as follows:
For the U.S.A., Hawaii, Guam and
Puerto Rico
Short press adjustment: Increases or
decreases by 1 mph (1.6 km/h) each
time the switch is pressed
Long press adjustment: Increases or
decreases in 1 mph (1.6 km/h) incre-
ments continuously while the switch is
pressed and held
Except for the U.S.A., Hawaii,
Guam and Puerto Rico
Short press adjustment: By 1 km/h (0.6
mph) or 1 mph (1.6 km/h) each time the
switch is pressed
Long press adjustment: Increases or
decreases in 5 km/h (3.1 mph) or 5
mph (8 km/h) increments continuously
while the switch is pressed and held
Increasing the set vehicle speed
using the accelerator pedal
1 Depress the accelerator pedal to
accelerate the vehicle to the
desired vehicle speed.
2 Press the “+” switch.
■ Canceling/resuming control
1 Press the cancel switch or driving
assist switch to cancel control.
Control will also be canceled if the brake
pedal is depressed.
(If the vehicle has been stopped by system
control, depressing the brake pedal will not
cancel control.)
2 Press the “RES” switch to resume
control.
254
4-5. Using the driving support systems
■ Changing the vehicle-to-vehicle
distance
Each time the switch is pressed, the
vehicle-to-vehicle distance setting will
change as follows:
If a preceding vehicle is detected, the
preceding vehicle mark will be dis-
played.
The actual vehicle-to-vehicle distance
varies in accordance with the vehicle
speed. Also, when the vehicle is
stopped by system control, it will be
stopped at a certain distance from the
preceding vehicle, depending on the
situation, regardless of the setting.
■ Operating conditions
● The D shift position is selected.
● The desired set speed can be set when
the vehicle speed is approximately 20
mph (30 km/h) or more.
• If the vehicle speed is set while driving at
below approximately 20 mph (30 km/h),
the set vehicle speed will be approxi-
mately 20 mph (30 km/h).
• If the vehicle speed is set while driving at
a speed that exceeds the system’s upper
limit, the set vehicle speed will be the sys-
tem’s upper limit.
■ Accelerating after setting the vehicle
speed
As with normal driving, acceleration can be
performed by depressing the accelerator
pedal. After accelerating, the vehicle will
return to the set vehicle speed. However,
while in vehicle-to-vehicle distance control
mode, the vehicle speed may decrease to
below the set vehicle speed in order to
maintain the distance from the preceding
vehicle.
■ When the vehicle is stopped by system
control during follow-up cruising
● When the “RES” switch is pressed while
the vehicle is stopped by system control,
if the preceding vehicle starts off within
approximately 3 seconds, follow-up
cruising will resume.
● If the preceding vehicle starts off within
approximately 3 seconds of the vehicle
being stopped by system control, follow-
up cruising will resume.
■ Automatic cancellation of vehicle-to-
vehicle distance control mode
In the following situations, vehicle-to-vehi-
cle distance control mode will be canceled
automatically:
● When the brake control or output
restriction control of a driving support
system operates
(For example: Pre-Collision System,
drive-start control)
● When the parking brake has been oper-
ated
● When the driver’s seat belt is unfastened
Illustra-
tion
Number
Vehicle-
to-vehicle
distance
Approximate Dis-
tance (Vehicle
Speed: 60 mph
[100 km/h])
1 Extra long
Approximately
200 ft. (60 m)
2 Long
Approximately 145
ft. (45 m)
3 Medium
Approximately 100
ft. (30 m)
4 Short
Approximately 85
ft. (25 m)
A
255
4-5. Using the driving support systems
4
Driving
while driving
● When the Pre-Collision System is dis-
abled
● When the vehicle is stopped by system
control on a steep incline
● When any of the following are detected
while the vehicle is stopped by system
control:
• The driver’s seat belt is unfastened
• The driver’s door is opened
• Approximately 3 minutes have elapsed
since the vehicle was stopped
The parking brake may be actived automat-
ically.
● Situations in which some or all of the
functions of the system cannot operate:
P.220
■ Dynamic radar cruise control system
warning messages and buzzers
For safe use: P.215
■ Preceding vehicles that the sensor may
not detect correctly
In the following situations, depending on the
conditions, if the system cannot provide suf-
ficient deceleration or acceleration is nec-
essary, operate the brake pedal or
accelerator pedal.
As the sensor may not be able to correctly
detect these types of vehicles, the approach
warning (P.255) may not operate.
● When a vehicle cuts in front of your vehi-
cle or changes lanes away from your
vehicle extremely slowly or quickly
● When changing lanes
● When a preceding vehicle is driving at a
low speed
● When a vehicle is stopped in the same
lane as the vehicle
● When a motorcycle is traveling in the
same lane as the vehicle
■ Conditions under which the system may
not operate correctly
In the following situations, operate the
brake pedal (or accelerator pedal, depend-
ing on the situation) as necessary.
As the sensor may not be able to correctly
detect a vehicle, the system may not oper-
ate properly.
● When a preceding vehicle brakes sud-
denly
● When changing lanes at low speeds,
such as in a traffic jam
In situations where the vehicle
approaches a preceding vehicle and
the system cannot provide sufficient
deceleration, such as if a vehicle cuts in
front of the vehicle, a warning display
will flash and a buzzer will sound to
alert the driver. Depress the brake
pedal to ensure appropriate vehicle-
to-vehicle distance.
■ Warnings may not occur when
In the following situations, the warning
may not operate even though the vehi-
cle-to-vehicle distance is short.
When the preceding vehicle is trav-
eling at the same speed or faster
than your vehicle
When the preceding vehicle is trav-
eling at an extremely low speed
Immediately after the vehicle speed
has been set
When the accelerator pedal is
depressed
When a curve is detected, the vehicle
speed will begin being reduced. When
the curve ends, the vehicle speed
reduction will end.
Depending on the situation, the vehicle
Approach warning
Curve speed reduction function
256
4-5. Using the driving support systems
speed will then return to the set vehicle
speed.
In situations where vehicle-to-vehicle dis-
tance control needs to operate, such as
when a preceding vehicle cuts in front of
your vehicle, the curve speed reduction
function will be canceled.
■ Situations in which the curve speed
reduction function may not operate
In situations such as the following, the curve
speed reduction function may not operate:
● When the vehicle is being driven around
a gentle curve
● When the accelerator pedal is being
depressed
● When the vehicle is being driven around
an extremely short curve
If your vehicle is being driven at
approximately 50 mph (80 km/h) or
more and a lane change to the passing
lane is performed, when the turn signal
lever is operated and the lane is
changed, the vehicle will accelerate up
to the set speed to assist in overtaking.
The system’s recognition of which lane is
the passing lane may be based solely on
the location of the steering wheel in the
vehicle (left-hand drive/right-hand drive).
If the vehicle is driven in a location where
the passing lane is on the opposite side of
that where the vehicle was originally sold,
the vehicle may accelerate when the turn
signal lever is operated away from the
passing lane. (e.g. The vehicle was manu-
factured to be driven on roads for right-
hand drive vehicles [that overtake on the
right], but is being used on roads for left-
hand drive vehicles [that overtake on the
left]. In this case, the vehicle may acceler-
ate when the turn signal lever is operated
to the right.)
If your vehicle is being driven at approxi-
mately 50 mph (80 km/h) or more and
the lane is changed to that with a vehicle
traveling slower than your vehicle, when
the turn signal lever is operated the vehicle
will gradually decelerate to assist in chang-
ing lanes.
The settings of Dynamic radar cruise
control can be changed through cus-
tomize settings. (P.466)
The operating state of Dynamic radar cruise control is indicated.
Support for lane change
Changing Dynamic radar cruise
control settings
Display and system operation state
257
4-5. Using the driving support systems
4
Driving
Indicator Multi-information display Situation
White
Vehicle-to-vehicle
distance setting: Gray
Dynamic radar cruise
control being OFF
Green
Vehicle-to-vehicle
distance setting: Blue
Set vehicle speed:
Green
Constant speed cruis-
ing
Green
Vehicle-to-vehicle
distance setting: Blue
Set vehicle speed:
Green
Preceding vehicle:
White
Follow-up cruising
Green
Vehicle-to-vehicle
distance setting:
Orange flashing
Set vehicle speed:
Green
Preceding vehicle:
Orange flashing
Approach warning
Green
Vehicle-to-vehicle
distance setting: Gray
Set vehicle speed:
White
Preceding vehicle:
Gray
Accelerating with the
accelerator pedal
258
4-5. Using the driving support systems
Green
Set vehicle speed:
Green in reverse dis-
play
Set vehicle speed
being exceeded
Green
Vehicle-to-vehicle
distance setting: Gray
Set vehicle speed:
White
Preceding vehicle:
Gray
Vehicle in controlled
stop
Indicator Multi-information display Situation
259
4-5. Using the driving support systems
4
Driving
■ Meter display
Set vehicle speed
Cruise control indicator
■ Switches
Driving assist mode select switch
Driving assist switch
“+” switch / “RES” switch
“-” switch
Cancel switch
■ Setting the vehicle speed
1
Press the driving assist mode select
switch to select Cruise Control
Mode.
Cruise control
The vehicle can be driven at a set
speed even if the accelerator pedal
is not depressed.
Use the cruise control only on high-
ways and expressways.
WARNING
■ For safe use
● Driving safely is solely the responsibil-
ity of the driver. Therefore, do not
overly rely on this system. The driver is
solely responsible for paying attention
to the vehicle’s surroundings and driv-
ing safely.
● Set the speed appropriately according
to the speed limit, traffic flow, road
conditions, weather conditions, etc.
The driver is responsible for confirm-
ing the set speed.
■ Situations in which cruise control
should not be used
Do not use the cruise control in the fol-
lowing situations. As the system will not
be able to provide appropriate control,
using it may lead to an accident resulting
in death or serious injury.
● On roads with sharp bends
● On winding roads
● On slippery roads, such as those cov-
ered with rain, ice or snow
● On steep downhills, or where there
are sudden changes between sharp up
and down gradients
Vehicle speed may exceed the set speed
when driving down a steep hill.
● When it is necessary to disable the sys-
tem: P.215
System components
Using the cruise control
A
B
A
B
C
D
E
260
4-5. Using the driving support systems
The cruise control indicator will illuminate.
2 Using the accelerator pedal, accel-
erate to the desired vehicle speed
(approximately 20 mph [30 km/h]
or more), and press the driving
assist switch to set the set vehicle
speed.
The vehicle speed at the moment the
switch is released will be the set vehicle
speed.
■ Adjusting the set vehicle speed
Adjusting the set vehicle speed
using the switches
To change the set vehicle speed, press the
“+” or “-” switch until the desired speed is
displayed.
1 Increase set vehicle speed
2 Decrease set vehicle speed
The set vehicle speed will increase or
decrease as follows:
Fine adjustment: By 1 mph (1.6 km/h) or 1
km/h (0.6 mph) each time the switch is
pressed
Large adjustment: Increases continuously
while the switch is pressed and held
Increasing the set vehicle speed
using the accelerator pedal
1 Depress the accelerator pedal to
accelerate the vehicle to the
desired vehicle speed.
2 Press the “+” switch.
■ Canceling/resuming control
1 Press the cancel switch or driving
assist switch to cancel control.
Control will also be canceled if the brake
pedal is depressed.
2 Press the “RES” switch to resume
control.
261
4-5. Using the driving support systems
4
Driving
■ Automatic cancellation of the cruise
control
In the following situations, the cruise control
will be canceled automatically:
● When the vehicle speed drops approxi-
mately 10 mph (16 km/h) or more below
the set vehicle speed
● When the vehicle speed drops below
approximately 20 mph (30 km/h)
● When the brake control or output
restriction control of a driving support
system operates (For example: PCS,
drive-start control)
● When the parking brake has been oper-
ated
● When the driver’s seat belt is unfastened
● Situations in which some or all of the
functions of the system cannot operate:
P.220
The operating state of cruise control is indicated.
Display and system operation state
Indicator Multi-information display Situation
White
Blank
Cruise control being
OFF
Green
Set vehicle speed:
Green
Constant speed cruis-
ing
Green
Set vehicle speed:
Green in reverse dis-
play
Set vehicle speed
being exceeded
262
4-5. Using the driving support systems
Operation of this system is separated
into 4 control states. Through control
state “warning phase 1” and “warning
phase 2”, the system determines if the
driver is aware and responsive while
outputting a warning and controlling
the vehicle speed. If the system deter-
mines the driver is not responsive, it will
operate in control state “deceleration
Emergency Driving Stop
S
ystem
The emergency driving stop system
is a system which automatically
decelerates and stops the vehicle
within its lane if the driver becomes
unable to continue driving the vehi-
cle, such as if they have suffered a
medical emergency, etc.
During LTA (Lane Tracing Assist)
control, if the system does not
detect driving operations, such as if
the driver is not holding the steer-
ing wheel, and determines the
driver is not responsive, the vehicle
will be decelerated and stopped
within its current lane to help avoid
a collision or reduce the impact of a
collision.
WARNING
■ For safe use
● Driving safely is solely the responsibil-
ity of the driver. Pay careful attention
to the surrounding conditions in order
to ensure safe driving. The emergency
driving stop system is designed to pro-
vide support in an emergency where it
is difficult for the driver to continue
driving, such as if they have had a med-
ical emergency. It is not designed to
support driving while drowsy or in
poor physical health, or inattentive
driving.
● Although the emergency driving stop
system is designed to decelerate the
vehicle within its lane to help avoid or
help reduce the impact of a collision if
the system determines that it is difficult
for the driver to continue driving, its
effectiveness may change according
to various conditions. Therefore, it may
not always be able to achieve the same
level of performance. Also, if the oper-
ating conditions are not met, this func-
tion will not operate.
● After the emergency driving stop sys-
tem operates, if driving becomes pos-
sible again, immediately begin driving
again or, if necessary, park the vehicle
on the shoulder of the road and set a
warning reflector and flare to warn
other drivers of your stopped vehicle.
● After this system operates, passengers
should attend to the driver as neces-
sary and take appropriate hazard pre-
vention measures, such as moving to a
place where safety can be ensured,
such as the shoulder of the road or
behind a guardrail.
● This system detects the condition of
the driver through the operation of the
steering wheel. This system may oper-
ate if the driver is aware but intention-
ally and continuously does not operate
the vehicle. Also, the system may not
operate if it cannot determine that the
driver is not responsive, such as if they
are leaning on the steering wheel.
Summary of the system
263
4-5. Using the driving support systems
4
Driving
stop phase” and “stop hold phase” and
decelerate and stop the vehicle. It will
then operate continuously in “stop hold
phase”.
■ Operating conditions
This system operates when all of the follow-
ing conditions are met:
● When the LTA is on
● When the vehicle speed is approximately
30 mph (50 km/h) or more
■ Operation cancelation conditions
In the following situations, system operation
will be canceled:
● When LTA control has been canceled
(the LTA switch has been pressed, etc.)
● When the dynamic radar cruise control
has been canceled
● When driver operations are detected
(the steering wheel is held, the brake
pedal, accelerator pedal, parking brake,
emergency flasher switch, or turn signal
lever is operated)
● When the driving assist switch is pressed
while in the stop and hold phase
● When the power switch has been turned
from ON to off
● Situations in which some or all of the
functions of the system cannot operate:
P.220
■ LTA control when operation is canceled
When emergency driving stop system
operation is canceled, LTA control may
also be canceled.
If driving operations are not detected
after the hands off steering wheel
warning operates, a buzzer will sound
intermittently and a message will be
displayed to warn the driver, and the
system will judge if the driver is respon-
sive or not. If driving operations, such
as holding the steering wheel, are not
performed within a certain amount of
time, the system will enter warning
phase 2.
After entering warning phase 2, a
buzzer will sound in short intervals and
a message will be displayed to warn
the driver, and the vehicle will slowly
decelerate. If driving operations, such
as holding the steering wheel, are not
performed within a certain amount of
time, the system will determine that the
driver is not responsive and enter the
deceleration stop phase.
The audio system will be muted until the
driver becomes responsive.
When the vehicle is decelerating, the
brake lights may illuminate, depending on
the road conditions, etc.
After entering the deceleration stop
phase, a buzzer will sound continu-
ously and a message will be displayed
to warn the driver, and the vehicle will
slowly decelerate and stop. After the
vehicle stops, the system will enter the
stop and hold phase.
After the vehicle is stopped, the park-
ing brake will be applied automatically.
After entering the stop and hold phase,
the buzzer will continue sounding con-
tinuously and the emergency flashers
Warning phase 1
Warning phase 2
Deceleration stop phase
Stop hold phase
264
4-5. Using the driving support systems
(hazard lights) will flash to warn other
drivers of the emergency.
■ Restricted functions after the
operation is canceled
After shifting to the deceleration stop
phase, the following functions will not
be available until the hybrid system is
restarted even though the emergency
driving stop system is canceled:
LTA
Center Display
BSM (Blind Spot Monitor)
The Blind Spot Monitor is a system
that uses rear side radar sensors
installed on the inner side of the
rear bumper on the left and right
side to assist the driver in confirm-
ing safety when changing lanes.
WARNING
■ Cautions regarding the use of the
system
● The driver is solely responsible for safe
driving. Always drive safely, taking
care to observe your surroundings.
● The Blind Spot Monitor is a supple-
mentary function which alerts the
driver that a vehicle is in a blind spot of
the outside rear view mirrors or is
approaching rapidly from behind into
a blind spot. Do not overly rely on the
Blind Spot Monitor. As the function
cannot judge if it is safe to change
lanes, over reliance could lead to an
accident resulting in death or serious
injury.
As the system may not function correctly
under certain conditions, the driver’s
own visual confirmation of safety is nec-
essary.
System components
A
265
4-5. Using the driving support systems
4
Driving
Turning the Blind Spot Monitor on/off.
Outside rear view mirror indicators
When a vehicle is detected in a blind spot
of the outside rear view mirrors or
approaching rapidly from behind into a
blind spot, the outside rear view mirror
indicator (P.81) on the detected side will
illuminate. If the turn signal lever is oper-
ated toward the detected side, the outside
rear view mirror indicator flashes.
Driving assist information indicator
Illuminates when the Blind Spot Monitor is
turned off. At this time, a message will be
displayed on the multi-information display.
■ Outside rear view mirror indicator visi-
bility
In strong sunlight, the outside rear view mir-
ror indicator may be difficult to see.
■ Customization
Some functions can be customized.
(P.467)
WARNING
■ To ensure the system can operate
properly
Blind Spot Monitor sensors are installed
behind the left and right sides of the rear
bumper respectively. Observe the fol-
lowing to ensure the Blind Spot Monitor
can operate correctly.
B
C
● Keep the sensors and the surrounding
areas on the rear bumper clean at all
times.
If a sensor or its surrounding area on the
rear bumper is dirty or covered with
snow, the Blind Spot Monitor may not
operate and a warning message will be
displayed. In this situation, clear off the
dirt or snow and drive the vehicle with
the operation conditions of the BSM
function (P.267) satisfied for approxi-
mately 10 minutes. If the warning mes-
sage does not disappear, have the
vehicle inspected by your Lexus dealer.
● Do not attach accessories, stickers
(including transparent stickers), alumi-
num tape, etc. to a sensor or its sur-
rounding area on the rear bumper.
● Do not subject a sensor or its sur-
rounding area on the rear bumper to a
strong impact.
If a sensor is moved even slightly off posi-
tion, the system may malfunction and
vehicles may not be detected correctly.
In the following situations, have your
vehicle inspected by your Lexus dealer.
• A sensor or its surrounding area is
subject to a strong impact.
• If the surrounding area of a sensor is
scratched or dented, or part of them
has become disconnected.
● Do not disassemble the sensor.
● Do not modify the sensor or surround-
ing area on the rear bumper.
266
4-5. Using the driving support systems
The Blind Spot Monitor can be
enabled/disabled through a custom-
ize setting. (P.467)
When the Blind Spot Monitor is off, the
driving assist information indicator
(P.81) will illuminate and a message
will be displayed on the multi-informa-
tion display.
Each time the power switch is turned to
ON, the Blind Spot Monitor is enabled.
■ Objects that can be detected while driving
The Blind Spot Monitor uses rear side radar sensors to detect the following vehi-
cles traveling in adjacent lanes and advises the driver of the presence of such vehi-
cles via the indicators on the outside rear view mirrors.
Vehicles that are traveling in areas that are not visible using the outside rear
view mirrors (the blind spots)
Vehicles that are approaching rapidly from behind in areas that are not visible
using the outside rear view mirrors (the blind spots)
■ Detection range while driving
The areas that vehicles can be detected in are outlined below.
WARNING
● If a sensor or the rear bumper needs to
be removed/installed or replaced,
contact your Lexus dealer.
● Do not paint the rear bumper any
color other than an official Lexus color.
Turning the Blind Spot Monitor
on/off
Blind Spot Monitor operation
A
B
267
4-5. Using the driving support systems
4
Driving
The range of each detection area is:
Approximately 1.6 ft. (0.5 m) to 11.5 ft. (3.5 m) from either side of the vehicle
*1
Approximately 3.3 ft. (1 m) forward of the rear bumper
Approximately 9.8 ft. (3 m) from the rear bumper
Approximately 9.8 ft. (3 m) to 197 ft. (60 m) from the rear bumper
*2
*1
: The area between the side of the vehicle and 1.6 ft. (0.5 m) from the side of the vehicle
cannot be detected.
*2
: The greater the difference in speed between your vehicle and the detected vehicle is,
the farther away the vehicle will be detected, causing the outside rear view mirror indi-
cator to illuminate or flash.
■ The Blind Spot Monitor linked
function
The LDA (Lane Departure Alert) has a
function that uses information of
detected vehicles driving in an adja-
cent lane. For details about the func-
tion and its operating conditions,
P.235.
■ The Blind Spot Monitor is operational
when
The Blind Spot Monitor is operational when
all of the following conditions are met:
● The power switch is in ON.
● The Blind Spot Monitor is on.
● The shift position is in a position other
than R.
● The vehicle speed is approximately 7
mph (10 km/h) or more.
■ The Blind Spot Monitor will detect a
vehicle when
The Blind Spot Monitor will detect a vehicle
present in the detection area in the follow-
ing situations:
● A vehicle in an adjacent lane overtakes
your vehicle.
● You overtake a vehicle in an adjacent
lane slowly.
● Another vehicle enters the detection
area when it changes lanes.
■ Situations in which the Blind Spot Moni-
tor cannot detect vehicles
The Blind Spot Monitor cannot detect the
following vehicles and other objects:
● Small motorcycles, bicycles, pedestrians,
etc.
*
● Vehicles traveling in the opposite direc-
tion
● Guardrails, walls, signs, parked vehicles
and similar stationary objects
*
● Following vehicles that are in the same
A
B
C
D
268
4-5. Using the driving support systems
lane
*
● Vehicles traveling 2 lanes away from
your vehicle
*
● Vehicles which are being overtaken rap-
idly by your vehicle
*
*
: Depending on the conditions, detection
of a vehicle and/or object may occur.
■ Conditions under which the system may
not function correctly
● The Blind Spot Monitor may not detect
vehicles correctly in the following situa-
tions:
• When the sensor is misaligned due to a
strong impact to the sensor or its sur-
rounding area
• When mud, snow, ice, a sticker, etc., is
covering the sensor or surrounding area
on the rear bumper
• When driving on a road surface that is
wet with standing water during bad
weather, such as heavy rain, snow, or fog
• When multiple vehicles are approaching
with only a small gap between each vehi-
cle
• When the distance between your vehicle
and a following vehicle is short
• When there is a significant difference in
speed between your vehicle and the
vehicle that enters the detection area
• When the difference in speed between
your vehicle and another vehicle is
changing
• When a vehicle enters a detection area
traveling at about the same speed as your
vehicle
• As your vehicle starts from a stop, a vehi-
cle remains in the detection area
• When driving up and down consecutive
steep inclines, such as hills, dips in the
road, etc.
• When driving on roads with sharp bends,
consecutive curves, or uneven surfaces
• When vehicle lanes are wide, or when
driving on the edge of a lane, and the
vehicle in an adjacent lane is far away
from your vehicle
• When an accessory (such as a bicycle
carrier) is installed to the rear of the vehi-
cle
• When there is a significant difference in
height between your vehicle and the
vehicle that enters the detection area
• Immediately after the Blind Spot Monitor
is turned on
• When towing with the vehicle
● Instances of the Blind Spot Monitor
unnecessarily detecting a vehicle and/or
object may increase in the following situ-
ations:
• When the sensor is misaligned due to a
strong impact to the sensor or its sur-
rounding area
• When the distance between your vehicle
and a guardrail, wall, etc. that enters the
detection area is short
• When driving up and down consecutive
steep inclines, such as hills, dips in the
road, etc.
• When vehicle lanes are narrow, or when
driving on the edge of a lane, and a vehi-
cle traveling in a lane other than the adja-
cent lanes enters the detection area
• When driving on roads with sharp bends,
consecutive curves, or uneven surfaces
• When the tires are slipping or spinning
• When the distance between your vehicle
and a following vehicle is short
• When an accessory (such as a bicycle
carrier) is installed to the rear of the vehi-
cle
• When towing with the vehicle
269
4-5. Using the driving support systems
4
Driving
Center Display
Turning the safe exit assist on/off.
Outside rear view mirror indicators
When a vehicle or bicycle which may col-
lide with a door (other than the back door)
when opened is detected, the outside rear
view mirror indicator (P.81) on the
detected side will illuminate. If the door on
the detected side is opened, the outside
rear view mirror indicator will blink.
Multi-information display
If collision with a door is likely and the door
is opened, the door will be displayed on the
multi-information display. Also, if a door is
opened when an outside rear view mirror
indicator is illuminated, a buzzer will sound
as a warning.
Driving assist information indicator
Illuminates when the safe exit assist is
turned off. At this time, a message will be
displayed on the multi-information display.
■ Outside rear view mirror indicator visi-
bility
In strong sunlight, the outside rear view mir-
ror indicator may be difficult to see.
■ Buzzer
If the volume setting of the audio system is
high or the surrounding area is loud, it may
be difficult to hear the buzzer.
■ Customization
Some functions can be customized.
(P.469)
Safe Exit Assist
The safe exit assist is a system that
uses rear side radar sensors
installed on the inner side of the
rear bumper to help occupants
judge if an approaching vehicle or
bicycle may collide with a door
when exiting, to help reduce the
possibility of a collision.
WARNING
■ Cautions regarding the use of the
system
● The driver is solely responsible for safe
driving. Always drive safely, taking
care to observe your surroundings.
● The safe exit assist is a supplementary
system that, when the vehicle is
stopped, informs occupants of the
existence of approaching vehicles and
bicycles. As this system alone cannot
be used to judge safety, over-reliance
on this system may lead to an accident
resulting in death or serious injury.
In certain situations, this system may not
function to its fullest extent. Therefore it is
necessary for the occupants to visually
check for safety directly and using the
mirrors.
System components
WARNING
■ To ensure the system can operate
properly
P.265
A
B
C
D
270
4-5. Using the driving support systems
The safe exit assist system can be
enabled/disabled through a custom-
ize setting. (P.469)
When the safe exit assist is off, the driv-
ing assist information indicator will illu-
minate and a message will be displayed
on the multi-information display.
Each time the power switch is turned to
ON, the safe exit assist is enabled.
■ Objects that can be detected by the safe exit assist
When the safe exit assist detects the following vehicles or bicycles behind your
vehicle using a rear side radar sensor, the occupants of the vehicle are informed
through an outside rear view mirror indicator, buzzer, and the multi-information
display.
Vehicle or bicycle which has a high possibility of colliding with a door (other
than the back door) when opened
■ The safe exit assist detection areas
The areas that vehicles can be detected in are outlined below.
Approximately 145 ft. (45 m) rearward from the front door
*
*
: The faster a vehicle or bicycle is approaching, the distance at which an outside rear view
mirror indicator will illuminate or blink will become further.
Turning the safe exit assist sys-
tem ON/OFF
Safe exit assist operation
A
A
271
4-5. Using the driving support systems
4
Driving
■ The safe exit assist is operational when
The safe exit assist is operational when all of
the following conditions are met:
● When the power switch is ON, less than
3 minutes have elapsed since the hybrid
system was off, or less than 3 minutes
have elapsed since a door was opened
and someone has entered the vehicle
(the time which operation is possible may
be extended if a door is opened and
closed)
● Safe exit assist is on
● The vehicle is stopped.
● The shift position is in a position other
than R.
■ The safe exit assist will detect a vehicle
when
The safe exit assist will detect a vehicle
present in the detection area in the follow-
ing situations:
● When the vehicle is stopped and a vehi-
cle or bicycle, which is traveling parallel
to the vehicle, is approaching within the
area that a door opens (other than the
back door)
■ Conditions under which the system will
not detect a vehicle
● Safe exit assist does not detect the fol-
lowing objects, vehicles, and bicycles:
• Vehicles or bicycles which are approach-
ing slowly
*
• Vehicles or bicycles which are deter-
mined to have a low possibility of collid-
ing with a door (other than the back
door) when opened
*
• Vehicles or bicycles which are approach-
ing from directly behind
*
• Vehicles or bicycles which are approach-
ing from the front
*
• Guardrails, walls, signs, parked vehicles,
and other stationary objects
*
• Pedestrians, animals, etc.
*
*
: Depending on the conditions, detection
of a vehicle and/or object may occur.
● In situations such as the following, safe
exit assist will not operate:
• When 3 minutes or more have elapsed
since the hybrid system off (the time
which operation is possible may be
extended if a door is opened and closed)
• When your vehicle is not completely
stopped
■ Conditions under which the system may
not function correctly
● The safe exit assist may not detect vehi-
cles correctly in the following situations:
• When the sensor is misaligned due to a
strong impact to the sensor or its sur-
rounding area
• When mud, snow, ice, a sticker, etc., is
covering the sensor or surrounding area
on the rear bumper
• When driving on a road surface that is
wet with standing water during bad
weather, such as heavy rain, snow, or fog
• When a vehicle or bicycle approaches
from behind a nearby parked vehicle
• When an approaching vehicle or bicycle
suddenly changes direction
• Immediately after a vehicle or bicycle
starts moving
• When the back door is open
• When a bicycle carrier, ramp, or other
accessory is installed to the back of the
vehicle
• When a parked vehicle, wall, sign, person
or other stationary object is behind the
vehicle
• When the vehicle is stopped at an angle
to the road
• When a vehicle is traveling near an
approaching vehicle or bicycle
• When an approaching vehicle or bicycle
is traveling along a stationary object, such
a wall or sign
• When a vehicle or bicycle is approaching
at high speed
• When towing with the vehicle
• When stopped on a steep slope
• When stopped on a curve or at the exit of
a curve
● Instances of the safe exit assist unneces-
sarily detecting a vehicle and/or object
may increase in the following situations:
• When the sensor is misaligned due to a
strong impact to the sensor or its sur-
rounding area
• When a vehicle or bicycle approaches
your vehicle from directly behind in an
272
4-5. Using the driving support systems
offset position
• When the vehicle is stopped at an angle
to the road
• When a vehicle or bicycle approaches
from behind a parked vehicle at an angle
• When a parked vehicle, wall, sign, person
or other stationary object is behind the
vehicle
• When an approaching vehicle or bicycle
suddenly changes direction
• When an approaching vehicle or bicycle
is traveling along a stationary object, such
a wall or sign
• When the back door is open
• When a bicycle carrier, ramp, or other
accessory is installed to the back of the
vehicle
• When a vehicle or bicycle is approaching
at high speed
• When towing with the vehicle
• When stopped on a steep slope
• When stopped on a curve or at the exit of
a curve
• When a vehicle or bicycle approaches
from behind a vehicle stopped in an adja-
cent lane
■ Type of sensors
Front corner sensors
Front center sensors
Rear corner sensors
Rear center sensors
■ Display
When the sensors detect an object,
such as a wall, a graphic is shown on
the Center Display depending on the
position and distance to the object.
Vehicles without Center Display or
rear camera: When detecting a sta-
tionary object, the intuitive parking
assist detection indicator illuminates.
(P.81)
Intuitive parking assist
The intuitive parking assist function
detects the approximate distance
from the vehicle and an object such
as a wall using ultrasonic sensors
and informs the driver with the
Center Display distance display
and buzzer.
System components
A
B
C
D
273
4-5. Using the driving support systems
4
Driving
Center Display
Front corner sensor detection
Front center sensor detection
Rear corner sensor detection
Rear center sensor detection
The intuitive parking assist function can
be enabled/disabled through a cus-
tomize setting. (P.468)
When the intuitive parking assist func-
tion is disabled, the intuitive parking
assist OFF indicator (P.81) illumi-
nates on the multi-information display.
If the system switches to OFF (dis-
abled) and the intuitive parking assist is
stopped, the intuitive parking assist will
not be re-enabled until ON (enabled)
is selected again from the customize
setting (P.468).
(It remains off even if the power switch
is turned to ON again after the power
switch has been turned off.)
Vehicles without the Center Display or
rear camera: However, the system will
automatically turn on (enabled) and
the intuitive parking assist OFF indica-
tor will turn off if the shift position is
changed to R.
When the shift position is R, the intui-
tive parking assist cannot be turned on
or off.
The setting of intuitive parking assist
itself will not change.
Turning the intuitive parking
assist function ON/OFF
A
B
C
D
WARNING
■ Cautions regarding the use of the
system
There is a limit to the degree of recogni-
tion accuracy and control performance
that this system can provide, do not
overly rely on this system. The driver is
always responsible for paying attention
to the vehicle’s surroundings and driving
safely.
■ To ensure the system can operate
properly
Make sure to observe the following pre-
cautions. The system may not operate
properly and may lead to an unexpected
accident. When these precautions can-
not be observed, turn the system off.
● Do not damage the sensors, and
always keep them clean.
● Do not attach a sticker or install an
electronic component, such as a back-
lit license plate (especially fluorescent
type), fog lights, fender pole or wire-
less antenna near a radar sensor.
● Do not subject the surrounding area of
the sensor to a strong impact. If sub-
jected to an impact, have the vehicle
inspected by your Lexus dealer. If the
front or rear bumper needs to be
removed/installed or replaced, con-
tact your Lexus dealer.
● Do not modify, disassemble or paint
the sensors.
● Do not attach a license plate cover.
● Keep your tires properly inflated.
274
4-5. Using the driving support systems
■ The system can be operated when
● The power switch is in ON.
● The intuitive parking assist function is on.
● The vehicle speed is less than about 6
mph (10 km/h).
● A shift position other than P is selected.
Vehicles without the Center Display or rear
camera: The system will automatically turn
on (enabled) and the intuitive parking assist
OFF indicator will turn off if the shift posi-
tion is changed to R.
The setting of intuitive parking assist itself
will not change.
■ Sensor detection information
● The sensor’s detection areas are limited
to the areas around the vehicle’s front
and rear bumpers.
● Certain vehicle conditions and the sur-
rounding environment may affect the
ability of a sensor to correctly detect an
object.
● Objects may not be detected if they are
too close to the sensor.
● There will be a short delay between
object detection and display. Even at low
speeds, there is a possibility that the
object will come within the sensor’s
detection areas before the display is
shown and the warning beep sounds.
● It might be difficult to hear the buzzer due
to the volume of the audio system or air
flow noise of the air conditioning system.
● It may be difficult to hear the sound of this
system due to the buzzers of other sys-
tems.
● If the meter malfunctions, the buzzer may
not sound.
■ Objects which the system may not be
properly detected
The shape of the object may prevent the
sensor from detecting it. Pay particular
attention to the following objects:
● Wires, fences, ropes, etc.
● Cotton, snow and other materials that
absorb sound waves
● Sharply-angled objects
● Low objects
● Tall objects with upper sections project-
ing outwards in the direction of your vehi-
cle
People may not be detected if they are
wearing certain types of clothing.
■ Situations in which the system may not
operate properly
Certain vehicle conditions and the sur-
rounding environment may affect the ability
of a sensor to correctly detect objects. Par-
ticular instances where this may occur are
listed below.
● There is dirt, snow, water drops or ice on
a sensor. (Cleaning the sensors will
resolve this problem.)
● A sensor is frozen. (Thawing the area will
resolve this problem.) In especially cold
weather, if a sensor is frozen the sensor
display may be displayed abnormally, or
objects, such as a wall, may not be
detected.
● When a sensor or the area around a sen-
sor is extremely hot or cold.
● On an extremely bumpy road, on an
WARNING
● Do not install a suspension other than
a genuine suspension.
■ Notes when washing the vehicle
● When using a high pressure washer to
wash the vehicle, do not spray the sen-
sors directly, as doing so may cause a
sensor to malfunction.
● When using steam to clean the vehi-
cle, do not direct steam too close to
the sensors as doing so may cause a
sensor to malfunction.
275
4-5. Using the driving support systems
4
Driving
incline, on gravel, or on grass.
● When vehicle horns, vehicle detectors,
motorcycle engines, air brakes of large
vehicles, the clearance sonar of other
vehicles or other devices which produce
ultrasonic waves are near the vehicle.
● A sensor is coated with a sheet of spray
or heavy rain.
● If objects draw too close to the sensor.
● When a pedestrian is wearing clothing
that does not reflect ultrasonic waves (ex.
skirts with gathers or frills).
● When objects that are not perpendicular
to the ground, not perpendicular to the
vehicle traveling direction, uneven, or
waving are in the detection range.
● When strong winds are blowing.
● When driving in inclement weather such
as fog, snow or a sandstorm.
● When an object that cannot be detected
is between the vehicle and a detected
object.
● If an object such as a vehicle, motorcycle,
bicycle or pedestrian cuts in front of the
vehicle or runs out from the side of the
vehicle.
● If the orientation of a sensor has been
changed due to a collision or other
impact.
● When equipment such as a towing eye-
let, transport hook, bumper protector,
bumper trim, bicycle carrier or snow-
removal device (snow plow) is installed
near the sensor
● If the front of the vehicle is raised or low-
ered due to the carried load.
● If the vehicle cannot be driven in a stable
manner, such as when the vehicle has
been in an accident or is malfunctioning.
● When tire chains, compact spare tire or
an emergency tire puncture repair kit are
used.
● When towing with the vehicle
■ Situations in which the system may
operate even if there is no possibility of a
collision
In some situations, such as the following, the
system may operate even though there is
no possibility of a collision.
● When driving on a narrow road.
● When driving toward a banner, flag, low-
hanging branch or boom barrier (such as
those used at railroad crossings, toll
gates and parking lots).
● When there is a rut or hole in the surface
of the road.
● When driving on a metal cover (grating),
such as those used for drainage ditches.
● When driving up or down a steep slope.
● If a sensor is hit by a large amount of
water, such as when driving on a flooded
road.
● There is dirt, snow, water drops or ice on
a sensor. (Cleaning the sensors will
resolve this problem.)
● A sensor is coated with a sheet of spray
or heavy rain.
● When driving in inclement weather such
as fog, snow or a sandstorm.
● When strong winds are blowing.
● When vehicle horns, vehicle detectors,
motorcycle engines, air brakes of large
vehicles, the clearance sonar of other
vehicles or other devices which produce
ultrasonic waves are near the vehicle.
● If the front of the vehicle is raised or low-
ered due to the carried load.
276
4-5. Using the driving support systems
● If the orientation of a sensor has been
changed due to a collision or other
impact.
● The vehicle is approaching a tall or
curved curb.
● Driving close to columns (H-shaped steel
beams, etc.) in multi-story parking
garages, construction sites, etc.
● If the vehicle cannot be driven in a stable
manner, such as when the vehicle has
been in an accident or is malfunctioning.
● On an extremely bumpy road, on an
incline, on gravel, or on grass.
● When tire chains, compact spare tire or
an emergency tire puncture repair kit are
used.
● When towing with the vehicle
■ Detection range of the sensors
Approximately 3.3 ft. (100 cm)
Approximately 4.9 ft. (150 cm)
Approximately 2.0 ft. (60 cm)
The diagram shows the detection range of
the sensors. Note that the sensors cannot
detect objects that are extremely close to
the vehicle.
The range of the sensors may change
depending on the shape of the object, etc.
■ The distance and buzzer
Sensor detection display, object
distance
A
B
C
Approximate distance to obstacle Buzzer
Front center sensor:
Approximately 3.3 ft. (100 cm) to 2.0 ft. (60 cm)
*
Rear center sensor:
Approximately 4.9 ft. (150 cm) to 2.0 ft. (60 cm)
*
Slow
Approximately 2.0 ft. (60 cm) to 1.5 ft. (45 cm)
*
Medium
Approximately 1.5 ft. (45 cm) to 1.0 ft. (30 cm)
*
Fast
Approximately less than 1.0 ft. (30 cm) Continuous
277
4-5. Using the driving support systems
4
Driving
*
: Automatic buzzer mute function is enabled. (P.277)
A buzzer sounds when the sensors are
operating.
The buzzer beeps faster as the vehi-
cle approaches a static object.
When the vehicle comes within the
approximately 1.0 ft. (30 cm) of the
object, the buzzer will sound contin-
uously.
When 2 or more sensors simultane-
ously detect a static object, the
buzzer sounds for the nearest
object.
After a buzzer begins sounding, if
the distance between the vehicle
and the detected a static object
does not become shorter, the
buzzer will be muted automatically.
(automatic buzzer mute function)
■ Adjusting the buzzer volume
The buzzer volume of the intuitive parking
assist, and RCTA can all be changed at
once from the customize settings.
(P.468)
■ Muting a buzzer
When the temporary mute switch is dis-
played on the Center Display, this switch
can be pressed to temporarily mute the
buzzer.
Select the switch to mute a buzzer of the
intuitive parking assist and RCTA all
together.
● Mute will be automatically canceled in
the following situations:
• When the shift position is changed.
• When the vehicle speed exceeds a cer-
tain speed.
• When there is a malfunction in a sensor
or the system is temporarily unavailable.
• When the operating function is disabled
manually.
• When the power switch is turned off.
Intuitive parking assist buzzer
278
4-5. Using the driving support systems
Center Display
Turning the RCTA function on/off in Cen-
ter Display
If a vehicle approaching from the right or
left at the rear of the vehicle is detected,
the RCTA icon (P.279) for the detected
side will be displayed on the Center Dis-
play. This illustration
*
shows an example of
a vehicle approaching from both sides of
the vehicle.
*
: Depending on the vehicle grade and
equipped options, the actual screen may
be different from this illustration.
Outside rear view mirror indicators
If a vehicle is detected as approaching
from the left or right behind the vehicle,
both outside rear view mirror indicators
(P.81) will blink and a buzzer will sound.
Driving assist information indicator
Illuminates when the RCTA is turned off.
At this time, a message will be displayed on
the multi-information display.
The RCTA can be enabled/disabled
through a customize setting.
(P.468)
When the RCTA function is off, the
driving assist information indicator
(P.81) will illuminate and a message
will be displayed on the multi-informa-
tion display. Each time the power
switch is turned to ON, the RCTA
function is enabled.
■ Outside rear view mirror indicator visi-
bility
In strong sunlight, the outside rear view mir-
RCTA (Rear Cross Traffic
A
lert) function
The RCTA function uses the BSM
rear side radar sensors installed
behind the rear bumper. This func-
tion is intended to assist the driver
in checking areas that are not easily
visible when backing up.
WARNING
■ Cautions regarding the use of the
system
The driver is solely responsible for safe
driving. Always drive safely, taking care
to observe your surroundings.
The RCTA function is only a supplemen-
tary function which alerts the driver that a
vehicle is approaching from the right or
left at the rear of the vehicle.
As the RCTA function may not function
correctly under certain conditions, the
driver’s own visual confirmation of safety
is necessary.
Over reliance on this function may lead
to an accident resulting death or serious
injury.
■ To ensure the system can operate
properly
P.265
System components
Turning the RCTA function
on/off
A
B
C
279
4-5. Using the driving support systems
4
Driving
ror indicator may be difficult to see.
■ Hearing the RCTA buzzer
The RCTA buzzer may be difficult to hear
over loud noises, such as if the audio system
volume is high.
■ Rear side radar sensors
P.265
■ Operation of the RCTA function
The RCTA function uses rear side
radar sensors to detect vehicles
approaching from the right or left at
the rear of the vehicle and alerts the
driver of the presence of such vehicles
by flashing the outside rear view mirror
indicators and sounding a buzzer.
Approaching vehicles
Detection areas of approaching
vehicles
■ RCTA icon display
When a vehicle approaching from the
right or left at the rear of the vehicle is
detected, the following will be dis-
played on the Center Display.
Example (Lexus parking assist mon-
itor): Vehicles are approaching
from both sides of the vehicle
■ RCTA function detection areas
The areas that vehicles can be
detected in are outlined below.
The buzzer can alert the driver of
faster vehicles approaching from far-
ther away.
Example:
■ The RCTA function is operational when
The RCTA function operates when all of the
following conditions are met:
● The power switch is in ON.
● The RCTA function is on.
● The shift position is in R.
● The vehicle speed is less than approxi-
RCTA function
A
B
Approaching vehi-
cle speed
Approximate
alert distance
34 mph (56 km/h)
(fast)
98 ft. (30 m)
5 mph (8 km/h)
(slow)
13 ft. (4 m)
A
280
4-5. Using the driving support systems
mately 9 mph (15 km/h).
● The approaching vehicle speed is
between approximately 5 mph (8 km/h)
and 34 mph (56 km/h).
■ Setting the buzzer volume
The buzzer volume of the RCTA and intui-
tive parking assist can be adjusted all
together through a customize setting.
(P.468)
■ Muting a buzzer temporarily
When an object is detected, the temporary
mute switch is displayed on the Center Dis-
play.
Select the switch to mute the buzzer of the
intuitive parking assist and RCTA all
together.
Mute will be canceled automatically in the
following situations:
● When the shift position is changed.
● When the vehicle speed exceeds a cer-
tain speed.
● When there is a malfunction in a sensor
or the system is temporarily unavailable.
● When the operating function is disabled
manually.
● When the power switch is turned off.
■ Conditions under which the system will
not detect a vehicle
The RCTA function is not designed to
detect the following types of vehicles
and/or objects:
● Vehicles approaching from directly
behind
● Vehicles backing up in a parking space
next to your vehicle
● Vehicles that the sensors cannot detect
due to obstructions
● Guardrails, walls, signs, parked vehicles
and similar stationary objects
*
● Small motorcycles, bicycles, pedestrians,
etc.
*
● Vehicles moving away from your vehicle
● Vehicles approaching from the parking
spaces next to your vehicle
*
● The distance between the sensor and
approaching vehicle gets too close
*
: Depending on the conditions, detection
of a vehicle and/or object may occur.
■ Situations in which the system may not
operate properly
The RCTA function may not detect vehicles
correctly in the following situations:
● When the sensor is misaligned due to a
strong impact to the sensor or its sur-
rounding area.
● When mud, snow, ice, a sticker, etc., is
covering the sensor or surrounding area
on the position above the rear bumper.
● When driving on a road surface that is
wet with standing water during bad
weather, such as heavy rain, snow, or fog.
● When multiple vehicles are approaching
with only a small gap between each vehi-
cle.
● When a vehicle is approaching at high
speed.
● When equipment that may obstruct a
sensor is installed, such as a towing eye-
let, bumper protector (an additional trim
strip, etc.), bicycle carrier, or snow plow.
● When backing up on a slope with a sharp
change in grade.
281
4-5. Using the driving support systems
4
Driving
● When backing out of a sharp angle park-
ing spot.
● Immediately after the RCTA function is
turned on
● Immediately after the hybrid system is
started with the RCTA function on
● When the sensors cannot detect a vehi-
cle due to obstructions
● When towing with the vehicle
● When there is a significant difference in
height between your vehicle and the
vehicle that enters the detection area.
● When a sensor or the area around a sen-
sor is extremely hot or cold.
● If the suspension has been modified or
tires of a size other than specified are
installed.
● If the front of the vehicle is raised or low-
ered due to the carried load.
● When turning while backing up.
● When a vehicle turns into the detection
area.
■ Situations in which the system may
operate even if there is no possibility of a
collision
Instances of the RCTA function unneces-
sary detecting a vehicle and/or object may
increase in the following situations:
● When the parking space faces a street
and vehicles are being driven on the
street.
● When the distance between your vehicle
and metal objects, such as a guardrail,
wall, sign, or parked vehicle, which may
reflect electrical waves toward the rear of
the vehicle, is short.
282
4-5. Using the driving support systems
● When equipment that may obstruct a
sensor is installed, such as a towing eye-
let, bumper protector (an additional trim
strip, etc.), bicycle carrier, or snow plow.
● When a vehicle passes by the side of your
vehicle.
● When a detected vehicle turns while
approaching the vehicle.
● When there are spinning objects near
your vehicle such as the fan of an air con-
ditioning unit.
● When water is splashed or sprayed
toward the rear bumper, such as from a
sprinkler.
● Moving objects (flags, exhaust fumes,
large rain droplets or snowflakes, rain
water on the road surface, etc.).
● When the distance between your vehicle
and a guardrail, wall, etc., that enters the
detection area is short.
● Gratings and gutters.
● When a sensor or the area around a sen-
sor is extremely hot or cold.
● If the suspension has been modified or
tires of a size other than specified are
installed.
● If the front of the vehicle is raised or low-
ered due to the carried load.
● When towing with the vehicle.
*
: If equipped
The system has detected the following
as operation targets. (The operation
targets vary depending on the func-
tion.)
Parking Support Brake function
(static objects front and rear of the
vehicle):P.286
Parking Support Brake function
(moving vehicles rear of the vehi-
cle):P.289
PKSB (Parking Support
B
rake)
*
The PKSB (Parking Support Brake)
is a system that issues warnings and
automatically performs braking to
help reduce collision damage with
operation targets that were
detected when traveling at a low
speed such as when parking.
PKSB (Parking Support Brake)
system
WARNING
■ Cautions regarding the use of the
system
Do not overly rely on the system, as
doing so may lead to an accident.
Always drive while checking the safety of
the surroundings of the vehicle.
Depending on the vehicle and road con-
ditions, weather, etc., the system may not
operate.
The detection capabilities of sensors and
radars are limited. Always drive while
checking the safety of the surroundings
of the vehicle.
283
4-5. Using the driving support systems
4
Driving
The Parking Support Brake function
can be enabled/disabled through a
customize setting. (P.468)
When the PKSB (Parking Support
Brake) is disabled, the driving assist
information indicator (P.81) illumi-
nates, and a message is displayed on
the multi-information display.
If the system switches to OFF (dis-
abled) and the PKSB (Parking Support
Brake) is stopped, the PKSB (Parking
Support Brake) will not be re-enabled
until ON (enabled) is selected again
from the customize setting (P.468).
(It remains off even if the power switch
is turned to ON again after the power
WARNING
● The driver is solely responsible for safe
driving. Always drive carefully, taking
care to observe your surroundings.
The Parking Support Brake system is
designed to provide support to lessen
the severity of collisions. However, it
may not operate in some situations.
● The Parking Support Brake system is
not designed to stop the vehicle com-
pletely. Additionally, even if the system
has stopped the vehicle, it is necessary
to depress the brake pedal immedi-
ately as brake control will be canceled
after approximately 2 seconds.
● It is extremely dangerous to check the
system operations by intentionally
driving the vehicle into the direction of
a wall, etc. Never attempt such actions.
■ When to disable the Parking Support
Brake
In the following situations, disable the
Parking Support Brake as the system
may operate even though there is no
possibility of a collision.
● When inspecting the vehicle using a
chassis roller, chassis dynamo or free
roller.
● When loading the vehicle onto a boat,
truck or other transport vessel.
● If the suspension has been modified or
tires of a size other than specified are
installed.
● If the front of the vehicle is raised or
lowered due to the carried load.
● When equipment such as a towing
hook, transport hook, bumper protec-
tor, bumper trim, bicycle carrier or
snow-removal device (snow plow) is
installed near the sensor.
● When using automatic car washing
devices.
● If the vehicle cannot be driven in a sta-
ble manner, such as when the vehicle
has been in an accident or is malfunc-
tioning.
● When the vehicle is driven in a sporty
manner or off-road.
● When the tires are not properly
inflated.
● When the tires are very worn.
● When tire chains, a compact spare tire
or an emergency tire puncture repair
kit are used.
● When towing with the vehicle
■ Precautions for the suspension
Do not modify the suspension of the
vehicle. If the height or tilt of the vehicle is
changed, the sensors may not be able to
detect detectable objects and the system
may not operate correctly, possibly lead-
ing to an accident.
Enabling/Disabling the Parking
Support Brake
284
4-5. Using the driving support systems
switch has been turned off.)
If the hybrid system output restriction con-
trol or brake control operates, a buzzer
will sound and a message will be displayed
on the Center Display and multi-informa-
tion display, to alert the driver.
Depending on the situation, output restric-
tion control operates to either limit accel-
eration or restrict output as much as
possible.
Hybrid system output restriction
control is operating (acceleration
restriction)
Acceleration greater than a certain
amount is restricted by the system.
Multi-information display: “Object
Detected Acceleration Reduced”
Driving assist information indicator: Not
illuminated
Buzzer: Does not sound
Hybrid system output restriction
control is operating (output
restricted as much as possible)
The system has determined that stronger-
than-normal brake operation is necessary.
Multi-information display: “BRAKE!”
Driving assist information indicator: Not
illuminated
Buzzer: Short beep
Brake control is operating
The system determined that emergency
braking is necessary.
Multi-information display: “BRAKE!”
Driving assist information indicator: Not
illuminated
Buzzer: Short beep
Vehicle stopped by system opera-
tion
The vehicle has been stopped by brake
control operation.
Multi-information display: “Accelerator
Pedal is Pressed Press Brake Pedal” (If the
accelerator pedal is not depressed, “Press
Brake Pedal” will be displayed.)
Driving assist information indicator: Illumi-
nated
Buzzer: Sounds repeatedly
If the Parking Support Brake deter-
mines that a collision with a detected
object is possible, the hybrid system
output will be restricted to restrain any
increase in the vehicle speed. (Hybrid
system output restriction control: See
figure 2 below.)
Additionally, if the accelerator pedal
continues to be depressed, the brakes
will be applied automatically to reduce
the vehicle speed. (Brake control: See
figure 3.)
Figure 1 When the PKSB (Parking
Support Brake) is not operating
Display and buzzer for hybrid
system output restriction control
and brake control
System overview
285
4-5. Using the driving support systems
4
Driving
Hybrid system output
Braking force
Time
Figure 2: When hybrid system out-
put restriction control operates
Hybrid system output
Braking force
Time
Hybrid system output restriction
control begins operating (System
determines that possibility of colli-
sion with detected object is high)
Figure 3: When hybrid system out-
put restriction control and brake
control operates
Hybrid system output
Braking force
Time
Hybrid system output restriction
control begins operating (System
determines that possibility of colli-
sion with detected object is high)
Brake control begins operating
(System determines that possibility
of collision with detected object is
extremely high)
■ If the Parking Support Brake has oper-
ated
If the vehicle is stopped due to operation of
the Parking Support Brake, the Parking
Support Brake will be disabled and the driv-
ing assist information indicator will illumi-
nate. In addition, even when the PKSB
(Parking Support Brake) operates, the
brake control is canceled after approxi-
mately 2 seconds to start off. Furthermore,
the brake control also can be canceled by
depressing the brake pedal. Depressing the
accelerator pedal again after that allows the
vehicle to start off.
■ Re-enabling the Parking Support Brake
To re-enable the Parking Support Brake
when it is disabled due to operation of the
PKSB (Parking Support Brake), either
enable the system again, or turn the power
switch off and then back to ON.
Additionally, if any of the following condi-
tions are met, the system will be re-enabled
automatically and the driving assist informa-
tion indicator will turn off (P.81):
● The P shift position is selected
● Drive with no operation targets in the
traveling direction of the vehicle
● Change the traveling direction of the
vehicle
■ Buzzer
Regardless of whether the intuitive parking
assist is enabled or not (P.273), if the
PKSB (Parking Support Brake) system is
enabled (P.283), the buzzer will sound
to notify the driver of the approximate dis-
tance to the object when the brake control
and the hybrid system output restriction
A
B
C
A
B
C
D
A
B
C
D
E
286
4-5. Using the driving support systems
control are operated.
*
: If equipped
This function will operate in situations
such as the following if an object is
detected in the traveling direction of
the vehicle.
Parking Support Brake
function (static objects front
and rear of the vehicle)
*
If the sensors detect a static object,
such as a wall, in the traveling direc-
tion of the vehicle and the system
determines that a collision may
occur due to the vehicle suddenly
moving forward due to an acciden-
tal accelerator pedal operation, the
vehicle moving the unintended
direction due to the wrong shift
position being selected, or while
parking or traveling at low speeds,
the system will operate to lessen
the impact with the detected static
object and reduce the resulting
damage.
Examples of function operation
(static objects front and rear of
the vehicle)
287
4-5. Using the driving support systems
4
Driving
■ When traveling at a low speed and
the brake pedal is not depressed,
or is depressed late
■ When the accelerator pedal is
depressed excessively
■ When the vehicle moves forward
due to the incorrect shift position
being selected
P.272
■ The Parking Support Brake function
(static objects front and rear of the vehi-
cle) will operate when
The function will operate when the driving
assist information indicator is not illumi-
nated (P.79, 81) and all of the following
conditions are met:
● Hybrid system output restriction control
• The Parking Support Brake is enabled.
• The vehicle speed is approximately 9
mph (15 km/h) or less.
Types of sensors
WARNING
■ To ensure the system can operate
properly
P.265
■ If the Parking Support Brake function
operates unnecessarily, such as at a
railroad crossing
P.285
■ Notes when washing the vehicle
P.274
288
4-5. Using the driving support systems
• There is a static object in the traveling
direction of the vehicle and approxi-
mately 6 to 13 ft. (2 to 4 m) away.
• The Parking Support Brake determines
that a stronger-than-normal brake oper-
ation is necessary to avoid a collision.
● Brake control
• Hybrid system output restriction control
is operating.
• The Parking Support Brake determines
that an immediate brake operation is
necessary to avoid a collision.
■ The Parking Support Brake function
(static objects front and rear of the vehi-
cle) will stop operating when
The function will stop operating if any of the
following conditions are met:
● Hybrid system output restriction control
• The Parking Support Brake is disabled.
• The system determines that the collision
has become avoidable with normal brake
operation.
• The static object is no longer approxi-
mately 6 to 13 ft. (2 to 4 m) away from the
vehicle or in the traveling direction of the
vehicle.
● Brake control
• The Parking Support Brake is disabled.
• Approximately 2 seconds have elapsed
since the vehicle was stopped by brake
control.
• The brake pedal is depressed after the
vehicle is stopped by brake control.
• The static object is no longer approxi-
mately 6 to 13 ft. (2 to 4 m) away from the
vehicle or in the traveling direction of the
vehicle.
■ Detection range of the Parking Support
Brake function (static objects front and
rear of the vehicle)
The detection range of the Parking Support
Brake function (static objects front and rear
of the vehicle) differs from the detection
range of the intuitive parking assist.
(P.276) Therefore, even if the intuitive
parking assist detects an object and pro-
vides a warning, the Parking Support Brake
function (static objects front and rear of the
vehicle) may not start operating.
■ Situations in which the system may not
operate properly
P.274
■ Situations in which the system may
operate even if there is no possibility of a
collision
P.275
289
4-5. Using the driving support systems
4
Driving
*
: If equipped
This function will operate in situations
such as the following if a vehicle is
detected in the traveling direction of
the vehicle.
■ When reversing, a vehicle is
approaching and the brake pedal is
not depressed, or is depressed late
P.265
■ The Parking Support Brake function
(moving vehicles rear of the vehicle) will
operate when
The function will operate when the driving
assist information indicator is not illumi-
nated (P.79, 81) and all of the following
conditions are met:
● Hybrid system output restriction control
• The Parking Support Brake is enabled.
• The vehicle speed is approximately 9
mph (15 km/h) or less.
• Vehicles are approaching from the right
or left at the rear of the vehicle at a travel-
ing speed of approximately 5 mph (8
km/h) or more.
• The shift position is in R.
• The Parking Support Brake determines
that a stronger than normal brake opera-
tion is necessary to avoid a collision with
an approaching vehicle.
● Brake control
• Hybrid system output restriction control
is operating.
• The Parking Support Brake determines
that a stronger than normal brake opera-
tion is necessary to avoid a collision with
an approaching vehicle.
■ The Parking Support Brake function
(moving vehicles rear of the vehicle) will
stop operating when
The function will stop operating if any of the
following conditions are met:
● Hybrid system output restriction control
• The Parking Support Brake is disabled.
• The collision becomes avoidable with
normal brake operation.
• A vehicle is no longer approaching from
the right or left at the rear of the vehicle.
● Brake control
• The Parking Support Brake is disabled.
• Approximately 2 seconds have elapsed
since the vehicle was stopped by brake
control.
Parking Support Brake
f
unction (moving vehicles
r
ear of the vehicle)
*
If a rear radar sensor detects a
vehicle approaching from the right
or left at the rear of the vehicle and
the system determines that the pos-
sibility of a collision is high, this
function will perform brake control
to reduce the likelihood of an
impact with the approaching vehi-
cle.
Examples of the function opera-
tion
Types of sensors
WARNING
■ To ensure the system can operate
properly
P.265
290
4-5. Using the driving support systems
• The brake pedal is depressed after the
vehicle is stopped by brake control.
• A vehicle is no longer approaching from
the right or left at the rear of the vehicle.
■ Situations in which the system may not
operate properly
P.280
■ Situations in which the system may
operate even if there is no possibility of a
collision
P.281
Vehicles without Adaptive Variable
Suspension system
1 Normal mode
Provides an optimal balance of fuel econ-
omy, quietness, and dynamic performance.
Suitable for city driving.
Press the switch to change the driving
mode to Normal mode when not in Nor-
mal mode.
2 Eco drive mode
Helps the driver accelerate in an eco-
friendly manner and improve fuel economy
through moderate throttle characteristics
and by controlling the operation of the air
conditioning system (heating/cooling).
When not in Eco drive mode, if the driving
mode select switch is turned toward you,
the Eco drive mode indicator comes on.
3 Sport mode
Assists acceleration response by con-
Driving mode select switch
The driving modes can be selected
to suit driving conditions.
Selecting the driving mode
291
4-5. Using the driving support systems
4
Driving
trolling the hybrid system and steering.
Suitable for when precise handling is desir-
able, for example when driving on moun-
tain roads.
When not in Sport mode, if the driving
mode select switch is turned backward, the
Sport mode indicator comes on and the
Hybrid System Indicator changes to the
tachometer. (P.84, 90)
Vehicles with Adaptive Variable
Suspension system
1 Normal mode/Custom mode
Normal mode and Custom mode are
selected by pressing the driving mode
select switch. Each time the switch is
pressed, the driving mode changes
between Normal mode and Custom
mode. When Custom mode is selected,
the Custom mode indicator comes on.
Press the switch to change the driving
mode to Normal mode when not in Nor-
mal mode.
• Normal mode
Provides an optimal balance of fuel econ-
omy, quietness, and dynamic performance.
Suitable for city driving.
• Custom mode
Allows you to drive with the power train,
suspension, steering and air conditioning
system functions set to your preferred set-
tings.
Custom mode settings can only be
changed on the drive mode customization
display of Center Display. (P.460)
2 Eco drive mode
Helps the driver accelerate in an eco-
friendly manner and improve fuel economy
through moderate throttle characteristics
and by controlling the operation of the air
conditioning system (heating/cooling).
When not in Eco drive mode, if the driving
mode select switch is turned toward you,
the Eco drive mode indicator comes on.
3 Sport mode
• SPORT S mode
Assists acceleration response by con-
trolling the hybrid system.
When not in Sport S mode, if the driving
mode select switch is turned away from
you, the Sport S mode indicator comes on
and the Hybrid System Indicator changes
to the tachometer. (P.84, 90)
• SPORT S+ mode
Helps to ensure superior vehicle stability
by simultaneously controlling the steering
and suspension in addition to the hybrid
system. Suitable for sportier driving.
When in SPORT S mode, if the driving
mode select switch is turned backward, the
Sport S+ mode indicator comes on.
■ Operation of the air conditioning sys-
tem in Eco drive mode
Eco drive mode controls the heating/cool-
ing operations and fan speed of the air con-
ditioning system to enhance fuel efficiency.
To improve air conditioning performance,
perform the following operations:
● Turn off eco air conditioning mode
(P.311)
● Adjust the fan speed (P.307, 310)
292
4-5. Using the driving support systems
● Turn off Eco drive mode
■ Automatic deactivation of Sport mode
and Custom mode (if equipped)
If the power switch is turned off after driving
in Sport mode or Custom mode, the driving
mode will be changed to Normal mode.
■ Display of the multi-information display
changes according to the selected driv-
ing mode
According to the selected driving mode,
the display of the multi-information display
may be changed.
■ Customization (vehicles with Adaptive
Variable Suspension system)
Settings (e.g. custom mode) can be
changed. (Customizable fea-
tures:P.460)
■ ECB (Electronically Controlled
Brake System)
The electronically controlled system
generates braking force correspond-
ing to the brake operation
■ ABS (Anti-lock Brake System)
Helps to prevent wheel lock when the
brakes are applied suddenly, or if the
brakes are applied while driving on a
slippery road surface
■ Brake assist
Generates an increased level of brak-
ing force after the brake pedal is
depressed when the system detects a
panic stop situation
■ VSC (Vehicle Stability Control)
Helps the driver to control skidding
when swerving suddenly or turning on
slippery road surfaces
■ Enhanced VSC (Enhanced Vehi-
cle Stability Control)
Provides cooperative control of the
ABS, TRAC, VSC and EPS.
Driving assist systems
To keep driving safety and perfor-
mance, the following systems oper-
ate automatically in response to
various driving situations. Be
aware, however, that these systems
are supplementary and should not
be relied upon too heavily when
operating the vehicle.
Summary of the driving assist
systems
293
4-5. Using the driving support systems
4
Driving
Helps to maintain directional stability
when swerving on slippery road sur-
faces by controlling steering perfor-
mance.
■ TRAC (Traction Control)
Helps to maintain drive power and
prevent the drive wheels from spinning
when starting the vehicle or accelerat-
ing on slippery roads
■ Active Cornering Assist (ACA)
Helps to prevent the vehicle from drift-
ing to the outer side by performing
inner wheel brake control when
attempting to accelerate while turning
■ Hill-start assist control
Helps to reduce the backward move-
ment of the vehicle when starting on an
uphill
■ EPS (Electric Power Steering)
Employs an electric motor to reduce
the amount of effort needed to turn the
steering wheel
■ E-Four (Electronic On-Demand
AWD system) (AWD models)
Automatically controls the drive sys-
tem such as to front-wheel drive or
AWD (all wheel drive) according to
various running conditions including
normal driving, during cornering, on a
uphill, when starting off, during accel-
eration, on a slippery roads due to
snow or rain, thus contributing to sta-
ble operability and driving stability.
■ AVS (Adaptive Variable Suspen-
sion system) (if equipped)
By independently controlling the
damping force of the shock absorbers
for each of the 4 wheels according to
the road and driving conditions, this
system helps riding comfort with supe-
rior vehicle stability, and helps good
vehicle posture. If Sport S+ mode is
selected using the driving mode select
switch, the damping force will become
more suitable for sporty driving.
(P.290)
■ The Secondary Collision Brake
When the SRS airbag sensor detects a
collision and the system operates, the
brakes and brake lights are automati-
cally controlled to reduce the vehicle
speed and help reduce the possibility
of further damage due to a secondary
collision.
■ Vehicle Braking Posture Control
[Roll Control]
Helps to suppress sudden vehicle roll
changes and keep comfortable pos-
ture by performing rear inner wheel
brake control when starting cornering
■ When the TRAC/VSC/ABS systems
are operating
The slip indicator light will flash while the
TRAC/VSC/ABS systems are operating.
■ Disabling the TRAC system
If the vehicle gets stuck in mud, dirt or snow,
the TRAC system may reduce power from
the hybrid system to the wheels. Pressing
294
4-5. Using the driving support systems
the switch to turn the system off may
make it easier for you to rock the vehicle in
order to free it.
To turn the TRAC system off, quickly press
and release the switch.
The “Traction Control Turned OFF” will be
shown on the multi-information display.
Press the switch again to turn the
system back on.
■ Turning off both TRAC and VSC sys-
tems
To turn the TRAC and VSC systems off,
press and hold the switch for more
than 3 seconds while the vehicle is stopped.
The VSC OFF indicator light will come on
and the “Traction Control Turned OFF” will
be shown on the multi-information display.
*
Press the switch again to turn the
system back on.
*
: PCS (Pre-Collision System) will also be
disabled (only pre-collision warning is
available). The PCS warning light will
come on and a message will be displayed
on the multi-information display.
(P.225)
■ When the message is displayed on the
multi-information display showing that
TRAC has been disabled even if the
switch has not been pressed
TRAC is temporary deactivated. If the
information continues to show, contact your
Lexus dealer.
■ Operating conditions of hill-start assist
control
When all of the following conditions are
met, the hill-start assist control will operate:
● The shift position is in a position other
than P or N (when starting off for-
ward/backward on an upward incline).
● The vehicle is stopped.
● The accelerator pedal is not depressed.
● The parking brake is not engaged.
● The power switch is in ON
■ Automatic system cancelation of hill-
start assist control
The hill-start assist control will turn off in any
of the following situations:
● The shift position is shifted to P or N.
● The accelerator pedal is depressed.
● The brake pedal is depressed and the
parking brake is engaged.
● A maximum of 2 seconds have elapsed
after the brake pedal is released
● The power switch is turned to OFF
■ Sounds and vibrations caused by the
ABS, brake assist, VSC, TRAC and hill-
start assist control systems
● A sound may be heard from the engine
compartment when the brake pedal is
depressed repeatedly, when the hybrid
system is started or just after the vehicle
begins to move. This sound does not indi-
cate that a malfunction has occurred in
any of these systems.
● Any of the following conditions may
occur when the above systems are oper-
ating.
None of these indicates that a malfunc-
tion has occurred.
• Vibrations may be felt through the vehi-
cle body and steering.
• A motor sound may be heard also after
the vehicle comes to a stop.
■ ECB operating sound
ECB operating sound may be heard in the
following cases, but it does not indicate that
a malfunction has occurred.
295
4-5. Using the driving support systems
4
Driving
● Operating sound heard from the engine
compartment when the brake pedal is
operated.
● Motor sound of the brake system heard
from the front part of the vehicle when
the driver’s door is opened.
● Operating sound heard from the engine
compartment when one or two minutes
passed after the stop of the hybrid sys-
tem.
■ Active Cornering Assist operation
sounds and vibrations
When the Active Cornering Assist is oper-
ated, operation sounds and vibrations may
be generated from the brake system, but
this is not a malfunction.
■ Automatic reactivation of TRAC and
VSC systems
After turning the TRAC and VSC systems
off, the systems will be automatically re-
enabled in the following situations:
● When the power switch is turned off
● If only the TRAC system is turned off, the
TRAC will turn on when vehicle speed
increases.
If both the TRAC and VSC systems are
turned off, automatic re-enabling will not
occur when vehicle speed increases.
■ Operating conditions of Active Corner-
ing Assist
The system operates in the following situa-
tions.
● TRAC/VSC can operate
● The driver is attempting to accelerate
while turning
● The system detects that the vehicle is
drifting to the outer side
● The brake pedal is released
■ Reduced effectiveness of the EPS sys-
tem
The effectiveness of the EPS system is
reduced to prevent the system from over-
heating when there is frequent steering
input over an extended period of time. The
steering wheel may feel heavy as a result.
Should this occur, refrain from excessive
steering input or stop the vehicle and turn
the hybrid system off. The EPS system
should return to normal within 10 minutes.
■ Operating conditions of emergency
brake signal
When the following conditions are met, the
emergency brake signal will operate:
● The emergency flashers are off.
● Actual vehicle speed is over 35 mph (55
km/h).
● The system judges from the vehicle
deceleration that it is a sudden braking
operation.
■ Automatic system cancelation of emer-
gency brake signal
The emergency brake signal will be can-
celed in any of the following situations:
● The emergency flashers are turned on.
● The system judges from the vehicle
deceleration that is not a sudden braking
operation.
■ Secondary Collision Brake operating
conditions
The system operates when the SRS airbag
sensor detects a collision while the vehicle
is in motion.
However, the system does not operate
when the components are damaged.
■ Secondary Collision Brake automatic
cancellation
The system is automatically canceled in any
of the following situations.
● The vehicle speed drops to approxi-
mately 0 mph (0 km/h).
● A certain amount of time elapses during
operation
● The accelerator pedal is depressed a
large amount
■ Operating conditions of Vehicle Brak-
ing Posture Control [Roll Control]
The system operates when the following
occurs.
● The vehicle speed is approximately 25
mph (40 km/h) or more and less than 75
mph (120 km/h)
● The brake pedal is released
296
4-5. Using the driving support systems
● When the system detects steering opera-
tion over a certain level
● When the slip indicator light is not on or
flashing (does not operate during vehicle
stabilization control such as ABS, VSC,
TRAC, etc.)
■ Cancel conditions of Vehicle Braking
Posture Control [Roll Control]
● TRAC/VSC cannot operate
● The brake pedal is depressed (does not
operate even during automatic braking
such as Radar Cruise Control)
■ If a message about AWD is shown on
the multi-information display (AWD
models)
Perform the following actions.
● “AWD System Overheated Switching to
2WD Mode”
AWD system is overheated. Stop the vehi-
cle in a safe place with the hybrid system
operating.
*
If the message disappears after a while,
there is no problem. If the message remains,
have the vehicle inspected by your Lexus
dealer immediately.
● “AWD System Overheated 2WD Mode
Engaged”
AWD system has been temporarily
released and switched to front-wheel drive
due to overheating. Stop the vehicle in a
safe place with the hybrid system operat-
ing.
*
If the message disappears after a while,
AWD system will automatically recover. If
the message remains, have the vehicle
inspected by your Lexus dealer immedi-
ately.
● “AWD System Malfunction 2WD Mode
Engaged Visit Your Dealer”
A malfunction occurs in the AWD system.
Have the vehicle inspected by your Lexus
dealer immediately.
*
: When stopping the vehicle, do not stop
the hybrid system until the display mes-
sage has turned off.
WARNING
■ The ABS does not operate effectively
when
● The limits of tire gripping performance
have been exceeded (such as exces-
sively worn tires on a snow-covered
road).
● The vehicle hydroplanes while driving
at high speed on wet or slick road.
■ Stopping distance when the ABS is
operating may exceed that of normal
conditions
The ABS is not designed to shorten the
vehicle’s stopping distance. Always
maintain a safe distance from the vehicle
in front of you, especially in the following
situations:
● When driving on dirt, gravel or snow-
covered roads
● When driving with tire chains
● When driving over bumps in the road
● When driving over roads with pot-
holes or uneven surfaces
■ TRAC/VSC may not operate effec-
tively when
Directional control and power may not
be achievable while driving on slippery
road surfaces, even if the TRAC/VSC
system is operating.
Drive the vehicle carefully in conditions
where stability and power may be lost.
■ Active Cornering Assist does not
operate effectively when
● Do not rely overly rely on Active Cor-
nering Assist. Active Cornering Assist
may not operate effectively when
accelerating down slopes or driving on
slippery road surfaces.
297
4-5. Using the driving support systems
4
Driving
WARNING
● When Active Cornering Assist fre-
quently operates, Active Cornering
Assist may temporarily stop operating
to ensure proper operation of the
brakes, TRAC and VSC.
■ Hill-start assist control does not oper-
ate effectively when
● Do not overly rely on hill-start assist
control. Hill-start assist control may
not operate effectively on steep
inclines and roads covered with ice.
● Unlike the parking brake, hill-start
assist control is not intended to hold
the vehicle stationary for an extended
period of time. Do not attempt to use
hill-start assist control to hold the vehi-
cle on an incline, as doing so may lead
to an accident.
■ When the TRAC/ABS/VSC is acti-
vated
The slip indicator light flashes. Always
drive carefully. Reckless driving may
cause an accident. Exercise particular
care when the indicator light flashes.
■ When the TRAC/VSC systems are
turned off
Be especially careful and drive at a
speed appropriate to the road condi-
tions. As these are the systems to help
ensure vehicle stability and driving force,
do not turn the TRAC/VSC systems off
unless necessary.
■ Replacing tires
Make sure that all tires are of the speci-
fied size, brand, tread pattern and total
load capacity. In addition, make sure that
the tires are inflated to the recom-
mended tire inflation pressure level.
The ABS, TRAC and VSC systems will
not function correctly if different tires are
installed on the vehicle.
Contact your Lexus dealer for further
information when replacing tires or
wheels.
■ Handling of tires and the suspension
Using tires with any kind of problem or
modifying the suspension will affect the
driving assist systems, and may cause a
system to malfunction.
■ Secondary Collision Brake
Do not rely solely upon the Secondary
Collision Brake. This system is designed
to help reduce the possibility of further
damage due to a secondary collision,
however, that effect changes according
to various conditions. Overly relying on
the system may result in death or serious
injury.

Related Topics

Popular Owner Manuals