2019-2026 Lexus UX SUV Using the driving support systems -> PKSB (Parking Support Brake) User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Using the driving support systems -> PKSB (Parking Support Brake) for Your Lexus UX SUV First Generation (2019-2026)

282
4-5. Using the driving support systems
● When equipment that may obstruct a
sensor is installed, such as a towing eye-
let, bumper protector (an additional trim
strip, etc.), bicycle carrier, or snow plow.
● When a vehicle passes by the side of your
vehicle.
● When a detected vehicle turns while
approaching the vehicle.
● When there are spinning objects near
your vehicle such as the fan of an air con-
ditioning unit.
● When water is splashed or sprayed
toward the rear bumper, such as from a
sprinkler.
● Moving objects (flags, exhaust fumes,
large rain droplets or snowflakes, rain
water on the road surface, etc.).
● When the distance between your vehicle
and a guardrail, wall, etc., that enters the
detection area is short.
● Gratings and gutters.
● When a sensor or the area around a sen-
sor is extremely hot or cold.
● If the suspension has been modified or
tires of a size other than specified are
installed.
● If the front of the vehicle is raised or low-
ered due to the carried load.
● When towing with the vehicle.
*
: If equipped
The system has detected the following
as operation targets. (The operation
targets vary depending on the func-
tion.)
Parking Support Brake function
(static objects front and rear of the
vehicle):P.286
Parking Support Brake function
(moving vehicles rear of the vehi-
cle):P.289
PKSB (Parking Support
B
rake)
*
The PKSB (Parking Support Brake)
is a system that issues warnings and
automatically performs braking to
help reduce collision damage with
operation targets that were
detected when traveling at a low
speed such as when parking.
PKSB (Parking Support Brake)
system
WARNING
■ Cautions regarding the use of the
system
Do not overly rely on the system, as
doing so may lead to an accident.
Always drive while checking the safety of
the surroundings of the vehicle.
Depending on the vehicle and road con-
ditions, weather, etc., the system may not
operate.
The detection capabilities of sensors and
radars are limited. Always drive while
checking the safety of the surroundings
of the vehicle.
283
4-5. Using the driving support systems
4
Driving
The Parking Support Brake function
can be enabled/disabled through a
customize setting. (P.468)
When the PKSB (Parking Support
Brake) is disabled, the driving assist
information indicator (P.81) illumi-
nates, and a message is displayed on
the multi-information display.
If the system switches to OFF (dis-
abled) and the PKSB (Parking Support
Brake) is stopped, the PKSB (Parking
Support Brake) will not be re-enabled
until ON (enabled) is selected again
from the customize setting (P.468).
(It remains off even if the power switch
is turned to ON again after the power
WARNING
● The driver is solely responsible for safe
driving. Always drive carefully, taking
care to observe your surroundings.
The Parking Support Brake system is
designed to provide support to lessen
the severity of collisions. However, it
may not operate in some situations.
● The Parking Support Brake system is
not designed to stop the vehicle com-
pletely. Additionally, even if the system
has stopped the vehicle, it is necessary
to depress the brake pedal immedi-
ately as brake control will be canceled
after approximately 2 seconds.
● It is extremely dangerous to check the
system operations by intentionally
driving the vehicle into the direction of
a wall, etc. Never attempt such actions.
■ When to disable the Parking Support
Brake
In the following situations, disable the
Parking Support Brake as the system
may operate even though there is no
possibility of a collision.
● When inspecting the vehicle using a
chassis roller, chassis dynamo or free
roller.
● When loading the vehicle onto a boat,
truck or other transport vessel.
● If the suspension has been modified or
tires of a size other than specified are
installed.
● If the front of the vehicle is raised or
lowered due to the carried load.
● When equipment such as a towing
hook, transport hook, bumper protec-
tor, bumper trim, bicycle carrier or
snow-removal device (snow plow) is
installed near the sensor.
● When using automatic car washing
devices.
● If the vehicle cannot be driven in a sta-
ble manner, such as when the vehicle
has been in an accident or is malfunc-
tioning.
● When the vehicle is driven in a sporty
manner or off-road.
● When the tires are not properly
inflated.
● When the tires are very worn.
● When tire chains, a compact spare tire
or an emergency tire puncture repair
kit are used.
● When towing with the vehicle
■ Precautions for the suspension
Do not modify the suspension of the
vehicle. If the height or tilt of the vehicle is
changed, the sensors may not be able to
detect detectable objects and the system
may not operate correctly, possibly lead-
ing to an accident.
Enabling/Disabling the Parking
Support Brake
284
4-5. Using the driving support systems
switch has been turned off.)
If the hybrid system output restriction con-
trol or brake control operates, a buzzer
will sound and a message will be displayed
on the Center Display and multi-informa-
tion display, to alert the driver.
Depending on the situation, output restric-
tion control operates to either limit accel-
eration or restrict output as much as
possible.
Hybrid system output restriction
control is operating (acceleration
restriction)
Acceleration greater than a certain
amount is restricted by the system.
Multi-information display: “Object
Detected Acceleration Reduced”
Driving assist information indicator: Not
illuminated
Buzzer: Does not sound
Hybrid system output restriction
control is operating (output
restricted as much as possible)
The system has determined that stronger-
than-normal brake operation is necessary.
Multi-information display: “BRAKE!”
Driving assist information indicator: Not
illuminated
Buzzer: Short beep
Brake control is operating
The system determined that emergency
braking is necessary.
Multi-information display: “BRAKE!”
Driving assist information indicator: Not
illuminated
Buzzer: Short beep
Vehicle stopped by system opera-
tion
The vehicle has been stopped by brake
control operation.
Multi-information display: “Accelerator
Pedal is Pressed Press Brake Pedal” (If the
accelerator pedal is not depressed, “Press
Brake Pedal” will be displayed.)
Driving assist information indicator: Illumi-
nated
Buzzer: Sounds repeatedly
If the Parking Support Brake deter-
mines that a collision with a detected
object is possible, the hybrid system
output will be restricted to restrain any
increase in the vehicle speed. (Hybrid
system output restriction control: See
figure 2 below.)
Additionally, if the accelerator pedal
continues to be depressed, the brakes
will be applied automatically to reduce
the vehicle speed. (Brake control: See
figure 3.)
Figure 1 When the PKSB (Parking
Support Brake) is not operating
Display and buzzer for hybrid
system output restriction control
and brake control
System overview
285
4-5. Using the driving support systems
4
Driving
Hybrid system output
Braking force
Time
Figure 2: When hybrid system out-
put restriction control operates
Hybrid system output
Braking force
Time
Hybrid system output restriction
control begins operating (System
determines that possibility of colli-
sion with detected object is high)
Figure 3: When hybrid system out-
put restriction control and brake
control operates
Hybrid system output
Braking force
Time
Hybrid system output restriction
control begins operating (System
determines that possibility of colli-
sion with detected object is high)
Brake control begins operating
(System determines that possibility
of collision with detected object is
extremely high)
■ If the Parking Support Brake has oper-
ated
If the vehicle is stopped due to operation of
the Parking Support Brake, the Parking
Support Brake will be disabled and the driv-
ing assist information indicator will illumi-
nate. In addition, even when the PKSB
(Parking Support Brake) operates, the
brake control is canceled after approxi-
mately 2 seconds to start off. Furthermore,
the brake control also can be canceled by
depressing the brake pedal. Depressing the
accelerator pedal again after that allows the
vehicle to start off.
■ Re-enabling the Parking Support Brake
To re-enable the Parking Support Brake
when it is disabled due to operation of the
PKSB (Parking Support Brake), either
enable the system again, or turn the power
switch off and then back to ON.
Additionally, if any of the following condi-
tions are met, the system will be re-enabled
automatically and the driving assist informa-
tion indicator will turn off (P.81):
● The P shift position is selected
● Drive with no operation targets in the
traveling direction of the vehicle
● Change the traveling direction of the
vehicle
■ Buzzer
Regardless of whether the intuitive parking
assist is enabled or not (P.273), if the
PKSB (Parking Support Brake) system is
enabled (P.283), the buzzer will sound
to notify the driver of the approximate dis-
tance to the object when the brake control
and the hybrid system output restriction
A
B
C
A
B
C
D
A
B
C
D
E
286
4-5. Using the driving support systems
control are operated.
*
: If equipped
This function will operate in situations
such as the following if an object is
detected in the traveling direction of
the vehicle.
Parking Support Brake
function (static objects front
and rear of the vehicle)
*
If the sensors detect a static object,
such as a wall, in the traveling direc-
tion of the vehicle and the system
determines that a collision may
occur due to the vehicle suddenly
moving forward due to an acciden-
tal accelerator pedal operation, the
vehicle moving the unintended
direction due to the wrong shift
position being selected, or while
parking or traveling at low speeds,
the system will operate to lessen
the impact with the detected static
object and reduce the resulting
damage.
Examples of function operation
(static objects front and rear of
the vehicle)

Related Topics

Popular Owner Manuals