2019-2026 Lexus UX SUV Using the driving support systems -> Driving assist systems User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Using the driving support systems -> Driving assist systems for Your Lexus UX SUV First Generation (2019-2026)

292
4-5. Using the driving support systems
● Turn off Eco drive mode
■ Automatic deactivation of Sport mode
and Custom mode (if equipped)
If the power switch is turned off after driving
in Sport mode or Custom mode, the driving
mode will be changed to Normal mode.
■ Display of the multi-information display
changes according to the selected driv-
ing mode
According to the selected driving mode,
the display of the multi-information display
may be changed.
■ Customization (vehicles with Adaptive
Variable Suspension system)
Settings (e.g. custom mode) can be
changed. (Customizable fea-
tures:P.460)
■ ECB (Electronically Controlled
Brake System)
The electronically controlled system
generates braking force correspond-
ing to the brake operation
■ ABS (Anti-lock Brake System)
Helps to prevent wheel lock when the
brakes are applied suddenly, or if the
brakes are applied while driving on a
slippery road surface
■ Brake assist
Generates an increased level of brak-
ing force after the brake pedal is
depressed when the system detects a
panic stop situation
■ VSC (Vehicle Stability Control)
Helps the driver to control skidding
when swerving suddenly or turning on
slippery road surfaces
■ Enhanced VSC (Enhanced Vehi-
cle Stability Control)
Provides cooperative control of the
ABS, TRAC, VSC and EPS.
Driving assist systems
To keep driving safety and perfor-
mance, the following systems oper-
ate automatically in response to
various driving situations. Be
aware, however, that these systems
are supplementary and should not
be relied upon too heavily when
operating the vehicle.
Summary of the driving assist
systems
293
4-5. Using the driving support systems
4
Driving
Helps to maintain directional stability
when swerving on slippery road sur-
faces by controlling steering perfor-
mance.
■ TRAC (Traction Control)
Helps to maintain drive power and
prevent the drive wheels from spinning
when starting the vehicle or accelerat-
ing on slippery roads
■ Active Cornering Assist (ACA)
Helps to prevent the vehicle from drift-
ing to the outer side by performing
inner wheel brake control when
attempting to accelerate while turning
■ Hill-start assist control
Helps to reduce the backward move-
ment of the vehicle when starting on an
uphill
■ EPS (Electric Power Steering)
Employs an electric motor to reduce
the amount of effort needed to turn the
steering wheel
■ E-Four (Electronic On-Demand
AWD system) (AWD models)
Automatically controls the drive sys-
tem such as to front-wheel drive or
AWD (all wheel drive) according to
various running conditions including
normal driving, during cornering, on a
uphill, when starting off, during accel-
eration, on a slippery roads due to
snow or rain, thus contributing to sta-
ble operability and driving stability.
■ AVS (Adaptive Variable Suspen-
sion system) (if equipped)
By independently controlling the
damping force of the shock absorbers
for each of the 4 wheels according to
the road and driving conditions, this
system helps riding comfort with supe-
rior vehicle stability, and helps good
vehicle posture. If Sport S+ mode is
selected using the driving mode select
switch, the damping force will become
more suitable for sporty driving.
(P.290)
■ The Secondary Collision Brake
When the SRS airbag sensor detects a
collision and the system operates, the
brakes and brake lights are automati-
cally controlled to reduce the vehicle
speed and help reduce the possibility
of further damage due to a secondary
collision.
■ Vehicle Braking Posture Control
[Roll Control]
Helps to suppress sudden vehicle roll
changes and keep comfortable pos-
ture by performing rear inner wheel
brake control when starting cornering
■ When the TRAC/VSC/ABS systems
are operating
The slip indicator light will flash while the
TRAC/VSC/ABS systems are operating.
■ Disabling the TRAC system
If the vehicle gets stuck in mud, dirt or snow,
the TRAC system may reduce power from
the hybrid system to the wheels. Pressing
294
4-5. Using the driving support systems
the switch to turn the system off may
make it easier for you to rock the vehicle in
order to free it.
To turn the TRAC system off, quickly press
and release the switch.
The “Traction Control Turned OFF” will be
shown on the multi-information display.
Press the switch again to turn the
system back on.
■ Turning off both TRAC and VSC sys-
tems
To turn the TRAC and VSC systems off,
press and hold the switch for more
than 3 seconds while the vehicle is stopped.
The VSC OFF indicator light will come on
and the “Traction Control Turned OFF” will
be shown on the multi-information display.
*
Press the switch again to turn the
system back on.
*
: PCS (Pre-Collision System) will also be
disabled (only pre-collision warning is
available). The PCS warning light will
come on and a message will be displayed
on the multi-information display.
(P.225)
■ When the message is displayed on the
multi-information display showing that
TRAC has been disabled even if the
switch has not been pressed
TRAC is temporary deactivated. If the
information continues to show, contact your
Lexus dealer.
■ Operating conditions of hill-start assist
control
When all of the following conditions are
met, the hill-start assist control will operate:
● The shift position is in a position other
than P or N (when starting off for-
ward/backward on an upward incline).
● The vehicle is stopped.
● The accelerator pedal is not depressed.
● The parking brake is not engaged.
● The power switch is in ON
■ Automatic system cancelation of hill-
start assist control
The hill-start assist control will turn off in any
of the following situations:
● The shift position is shifted to P or N.
● The accelerator pedal is depressed.
● The brake pedal is depressed and the
parking brake is engaged.
● A maximum of 2 seconds have elapsed
after the brake pedal is released
● The power switch is turned to OFF
■ Sounds and vibrations caused by the
ABS, brake assist, VSC, TRAC and hill-
start assist control systems
● A sound may be heard from the engine
compartment when the brake pedal is
depressed repeatedly, when the hybrid
system is started or just after the vehicle
begins to move. This sound does not indi-
cate that a malfunction has occurred in
any of these systems.
● Any of the following conditions may
occur when the above systems are oper-
ating.
None of these indicates that a malfunc-
tion has occurred.
• Vibrations may be felt through the vehi-
cle body and steering.
• A motor sound may be heard also after
the vehicle comes to a stop.
■ ECB operating sound
ECB operating sound may be heard in the
following cases, but it does not indicate that
a malfunction has occurred.
295
4-5. Using the driving support systems
4
Driving
● Operating sound heard from the engine
compartment when the brake pedal is
operated.
● Motor sound of the brake system heard
from the front part of the vehicle when
the driver’s door is opened.
● Operating sound heard from the engine
compartment when one or two minutes
passed after the stop of the hybrid sys-
tem.
■ Active Cornering Assist operation
sounds and vibrations
When the Active Cornering Assist is oper-
ated, operation sounds and vibrations may
be generated from the brake system, but
this is not a malfunction.
■ Automatic reactivation of TRAC and
VSC systems
After turning the TRAC and VSC systems
off, the systems will be automatically re-
enabled in the following situations:
● When the power switch is turned off
● If only the TRAC system is turned off, the
TRAC will turn on when vehicle speed
increases.
If both the TRAC and VSC systems are
turned off, automatic re-enabling will not
occur when vehicle speed increases.
■ Operating conditions of Active Corner-
ing Assist
The system operates in the following situa-
tions.
● TRAC/VSC can operate
● The driver is attempting to accelerate
while turning
● The system detects that the vehicle is
drifting to the outer side
● The brake pedal is released
■ Reduced effectiveness of the EPS sys-
tem
The effectiveness of the EPS system is
reduced to prevent the system from over-
heating when there is frequent steering
input over an extended period of time. The
steering wheel may feel heavy as a result.
Should this occur, refrain from excessive
steering input or stop the vehicle and turn
the hybrid system off. The EPS system
should return to normal within 10 minutes.
■ Operating conditions of emergency
brake signal
When the following conditions are met, the
emergency brake signal will operate:
● The emergency flashers are off.
● Actual vehicle speed is over 35 mph (55
km/h).
● The system judges from the vehicle
deceleration that it is a sudden braking
operation.
■ Automatic system cancelation of emer-
gency brake signal
The emergency brake signal will be can-
celed in any of the following situations:
● The emergency flashers are turned on.
● The system judges from the vehicle
deceleration that is not a sudden braking
operation.
■ Secondary Collision Brake operating
conditions
The system operates when the SRS airbag
sensor detects a collision while the vehicle
is in motion.
However, the system does not operate
when the components are damaged.
■ Secondary Collision Brake automatic
cancellation
The system is automatically canceled in any
of the following situations.
● The vehicle speed drops to approxi-
mately 0 mph (0 km/h).
● A certain amount of time elapses during
operation
● The accelerator pedal is depressed a
large amount
■ Operating conditions of Vehicle Brak-
ing Posture Control [Roll Control]
The system operates when the following
occurs.
● The vehicle speed is approximately 25
mph (40 km/h) or more and less than 75
mph (120 km/h)
● The brake pedal is released
296
4-5. Using the driving support systems
● When the system detects steering opera-
tion over a certain level
● When the slip indicator light is not on or
flashing (does not operate during vehicle
stabilization control such as ABS, VSC,
TRAC, etc.)
■ Cancel conditions of Vehicle Braking
Posture Control [Roll Control]
● TRAC/VSC cannot operate
● The brake pedal is depressed (does not
operate even during automatic braking
such as Radar Cruise Control)
■ If a message about AWD is shown on
the multi-information display (AWD
models)
Perform the following actions.
● “AWD System Overheated Switching to
2WD Mode”
AWD system is overheated. Stop the vehi-
cle in a safe place with the hybrid system
operating.
*
If the message disappears after a while,
there is no problem. If the message remains,
have the vehicle inspected by your Lexus
dealer immediately.
● “AWD System Overheated 2WD Mode
Engaged”
AWD system has been temporarily
released and switched to front-wheel drive
due to overheating. Stop the vehicle in a
safe place with the hybrid system operat-
ing.
*
If the message disappears after a while,
AWD system will automatically recover. If
the message remains, have the vehicle
inspected by your Lexus dealer immedi-
ately.
● “AWD System Malfunction 2WD Mode
Engaged Visit Your Dealer”
A malfunction occurs in the AWD system.
Have the vehicle inspected by your Lexus
dealer immediately.
*
: When stopping the vehicle, do not stop
the hybrid system until the display mes-
sage has turned off.
WARNING
■ The ABS does not operate effectively
when
● The limits of tire gripping performance
have been exceeded (such as exces-
sively worn tires on a snow-covered
road).
● The vehicle hydroplanes while driving
at high speed on wet or slick road.
■ Stopping distance when the ABS is
operating may exceed that of normal
conditions
The ABS is not designed to shorten the
vehicle’s stopping distance. Always
maintain a safe distance from the vehicle
in front of you, especially in the following
situations:
● When driving on dirt, gravel or snow-
covered roads
● When driving with tire chains
● When driving over bumps in the road
● When driving over roads with pot-
holes or uneven surfaces
■ TRAC/VSC may not operate effec-
tively when
Directional control and power may not
be achievable while driving on slippery
road surfaces, even if the TRAC/VSC
system is operating.
Drive the vehicle carefully in conditions
where stability and power may be lost.
■ Active Cornering Assist does not
operate effectively when
● Do not rely overly rely on Active Cor-
nering Assist. Active Cornering Assist
may not operate effectively when
accelerating down slopes or driving on
slippery road surfaces.
297
4-5. Using the driving support systems
4
Driving
WARNING
● When Active Cornering Assist fre-
quently operates, Active Cornering
Assist may temporarily stop operating
to ensure proper operation of the
brakes, TRAC and VSC.
■ Hill-start assist control does not oper-
ate effectively when
● Do not overly rely on hill-start assist
control. Hill-start assist control may
not operate effectively on steep
inclines and roads covered with ice.
● Unlike the parking brake, hill-start
assist control is not intended to hold
the vehicle stationary for an extended
period of time. Do not attempt to use
hill-start assist control to hold the vehi-
cle on an incline, as doing so may lead
to an accident.
■ When the TRAC/ABS/VSC is acti-
vated
The slip indicator light flashes. Always
drive carefully. Reckless driving may
cause an accident. Exercise particular
care when the indicator light flashes.
■ When the TRAC/VSC systems are
turned off
Be especially careful and drive at a
speed appropriate to the road condi-
tions. As these are the systems to help
ensure vehicle stability and driving force,
do not turn the TRAC/VSC systems off
unless necessary.
■ Replacing tires
Make sure that all tires are of the speci-
fied size, brand, tread pattern and total
load capacity. In addition, make sure that
the tires are inflated to the recom-
mended tire inflation pressure level.
The ABS, TRAC and VSC systems will
not function correctly if different tires are
installed on the vehicle.
Contact your Lexus dealer for further
information when replacing tires or
wheels.
■ Handling of tires and the suspension
Using tires with any kind of problem or
modifying the suspension will affect the
driving assist systems, and may cause a
system to malfunction.
■ Secondary Collision Brake
Do not rely solely upon the Secondary
Collision Brake. This system is designed
to help reduce the possibility of further
damage due to a secondary collision,
however, that effect changes according
to various conditions. Overly relying on
the system may result in death or serious
injury.

Related Topics

Popular Owner Manuals