
247
4-5. Using the driving support systems
4
Driving
vehicle, the number of displayed signs may
be limited.
■ Operating conditions of sign display
Signs will be displayed when the following
conditions are met:
● The system has detected a sign
In the following situations, a displayed sign
may stop being displayed:
● When a new sign has not been detected
for a certain distance
● When the system determines that the
road being driven on has changed, such
as after a left or right turn
■ Situations in which the display function
may not operate properly
In the following situations, the RSA system
may not operate properly and may not
detect signs or may display the incorrect
sign. However, this does not indicate a mal-
function.
● When a sign is dirty, faded, tilted or bent
● When the contrast of an electronic sign is
low
● When all or part of a sign is hidden by a
tree, utility pole, etc.
● When a sign is detected by the front
camera for a short amount of time
● When the driving state (turning, chang-
ing lanes, etc.) is judged incorrectly
● When a sign is immediately after a free-
way junction or in an adjacent lane just
before merging
● When stickers are attached to the rear of
a preceding vehicle
● When a sign similar to a system compati-
ble sign is detected as a system compati-
ble sign
● When a speed limit sign for a frontage
road is within detection range of the front
camera
● When driving around a roundabout
● When a sign intended for trucks, etc. is
detected
● When a sign has a supplemental sign
(end point, day of week, time of day, etc.)
● When there is a sign within a traffic
restricted area, such as a roadworks area
● When the navigation system map data is
out of date
● When the navigation system cannot be
used
In this case, the speed limit signs displayed
on the multi-information display and navi-
gation system display may differ.
In the following situations, the RSA sys-
tem will output a warning to notify the
driver.
If the vehicle speed exceeds the
speed warning threshold of the
speed limit sign displayed on the
display, the sign display will be
emphasized and a buzzer will
sound.
When the RSA system detects a do
not enter sign and determines that
the vehicle has entered a no-entry
area, the do not enter sign displayed
on the display will flash and a buzzer
will sound.
■ Operating conditions of the notification
functions
● Excess speed notification function
This function will operate when the follow-
ing condition is met:
• A speed limit road sign is recognized by
the system.
● No entry notification function
This function will operate when all of the fol-
lowing conditions are met:
• More than one no entry road signs are
recognized by the system simultaneously.
• The vehicle is passing between no entry
Notification function