2019-2026 Lexus UX SUV Using the driving support systems -> Intuitive parking assist User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Using the driving support systems -> Intuitive parking assist for Your Lexus UX SUV First Generation (2019-2026)

272
4-5. Using the driving support systems
offset position
• When the vehicle is stopped at an angle
to the road
• When a vehicle or bicycle approaches
from behind a parked vehicle at an angle
• When a parked vehicle, wall, sign, person
or other stationary object is behind the
vehicle
• When an approaching vehicle or bicycle
suddenly changes direction
• When an approaching vehicle or bicycle
is traveling along a stationary object, such
a wall or sign
• When the back door is open
• When a bicycle carrier, ramp, or other
accessory is installed to the back of the
vehicle
• When a vehicle or bicycle is approaching
at high speed
• When towing with the vehicle
• When stopped on a steep slope
• When stopped on a curve or at the exit of
a curve
• When a vehicle or bicycle approaches
from behind a vehicle stopped in an adja-
cent lane
■ Type of sensors
Front corner sensors
Front center sensors
Rear corner sensors
Rear center sensors
■ Display
When the sensors detect an object,
such as a wall, a graphic is shown on
the Center Display depending on the
position and distance to the object.
Vehicles without Center Display or
rear camera: When detecting a sta-
tionary object, the intuitive parking
assist detection indicator illuminates.
(P.81)
Intuitive parking assist
The intuitive parking assist function
detects the approximate distance
from the vehicle and an object such
as a wall using ultrasonic sensors
and informs the driver with the
Center Display distance display
and buzzer.
System components
A
B
C
D
273
4-5. Using the driving support systems
4
Driving
Center Display
Front corner sensor detection
Front center sensor detection
Rear corner sensor detection
Rear center sensor detection
The intuitive parking assist function can
be enabled/disabled through a cus-
tomize setting. (P.468)
When the intuitive parking assist func-
tion is disabled, the intuitive parking
assist OFF indicator (P.81) illumi-
nates on the multi-information display.
If the system switches to OFF (dis-
abled) and the intuitive parking assist is
stopped, the intuitive parking assist will
not be re-enabled until ON (enabled)
is selected again from the customize
setting (P.468).
(It remains off even if the power switch
is turned to ON again after the power
switch has been turned off.)
Vehicles without the Center Display or
rear camera: However, the system will
automatically turn on (enabled) and
the intuitive parking assist OFF indica-
tor will turn off if the shift position is
changed to R.
When the shift position is R, the intui-
tive parking assist cannot be turned on
or off.
The setting of intuitive parking assist
itself will not change.
Turning the intuitive parking
assist function ON/OFF
A
B
C
D
WARNING
■ Cautions regarding the use of the
system
There is a limit to the degree of recogni-
tion accuracy and control performance
that this system can provide, do not
overly rely on this system. The driver is
always responsible for paying attention
to the vehicle’s surroundings and driving
safely.
■ To ensure the system can operate
properly
Make sure to observe the following pre-
cautions. The system may not operate
properly and may lead to an unexpected
accident. When these precautions can-
not be observed, turn the system off.
● Do not damage the sensors, and
always keep them clean.
● Do not attach a sticker or install an
electronic component, such as a back-
lit license plate (especially fluorescent
type), fog lights, fender pole or wire-
less antenna near a radar sensor.
● Do not subject the surrounding area of
the sensor to a strong impact. If sub-
jected to an impact, have the vehicle
inspected by your Lexus dealer. If the
front or rear bumper needs to be
removed/installed or replaced, con-
tact your Lexus dealer.
● Do not modify, disassemble or paint
the sensors.
● Do not attach a license plate cover.
● Keep your tires properly inflated.
274
4-5. Using the driving support systems
■ The system can be operated when
● The power switch is in ON.
● The intuitive parking assist function is on.
● The vehicle speed is less than about 6
mph (10 km/h).
● A shift position other than P is selected.
Vehicles without the Center Display or rear
camera: The system will automatically turn
on (enabled) and the intuitive parking assist
OFF indicator will turn off if the shift posi-
tion is changed to R.
The setting of intuitive parking assist itself
will not change.
■ Sensor detection information
● The sensor’s detection areas are limited
to the areas around the vehicle’s front
and rear bumpers.
● Certain vehicle conditions and the sur-
rounding environment may affect the
ability of a sensor to correctly detect an
object.
● Objects may not be detected if they are
too close to the sensor.
● There will be a short delay between
object detection and display. Even at low
speeds, there is a possibility that the
object will come within the sensor’s
detection areas before the display is
shown and the warning beep sounds.
● It might be difficult to hear the buzzer due
to the volume of the audio system or air
flow noise of the air conditioning system.
● It may be difficult to hear the sound of this
system due to the buzzers of other sys-
tems.
● If the meter malfunctions, the buzzer may
not sound.
■ Objects which the system may not be
properly detected
The shape of the object may prevent the
sensor from detecting it. Pay particular
attention to the following objects:
● Wires, fences, ropes, etc.
● Cotton, snow and other materials that
absorb sound waves
● Sharply-angled objects
● Low objects
● Tall objects with upper sections project-
ing outwards in the direction of your vehi-
cle
People may not be detected if they are
wearing certain types of clothing.
■ Situations in which the system may not
operate properly
Certain vehicle conditions and the sur-
rounding environment may affect the ability
of a sensor to correctly detect objects. Par-
ticular instances where this may occur are
listed below.
● There is dirt, snow, water drops or ice on
a sensor. (Cleaning the sensors will
resolve this problem.)
● A sensor is frozen. (Thawing the area will
resolve this problem.) In especially cold
weather, if a sensor is frozen the sensor
display may be displayed abnormally, or
objects, such as a wall, may not be
detected.
● When a sensor or the area around a sen-
sor is extremely hot or cold.
● On an extremely bumpy road, on an
WARNING
● Do not install a suspension other than
a genuine suspension.
■ Notes when washing the vehicle
● When using a high pressure washer to
wash the vehicle, do not spray the sen-
sors directly, as doing so may cause a
sensor to malfunction.
● When using steam to clean the vehi-
cle, do not direct steam too close to
the sensors as doing so may cause a
sensor to malfunction.
275
4-5. Using the driving support systems
4
Driving
incline, on gravel, or on grass.
● When vehicle horns, vehicle detectors,
motorcycle engines, air brakes of large
vehicles, the clearance sonar of other
vehicles or other devices which produce
ultrasonic waves are near the vehicle.
● A sensor is coated with a sheet of spray
or heavy rain.
● If objects draw too close to the sensor.
● When a pedestrian is wearing clothing
that does not reflect ultrasonic waves (ex.
skirts with gathers or frills).
● When objects that are not perpendicular
to the ground, not perpendicular to the
vehicle traveling direction, uneven, or
waving are in the detection range.
● When strong winds are blowing.
● When driving in inclement weather such
as fog, snow or a sandstorm.
● When an object that cannot be detected
is between the vehicle and a detected
object.
● If an object such as a vehicle, motorcycle,
bicycle or pedestrian cuts in front of the
vehicle or runs out from the side of the
vehicle.
● If the orientation of a sensor has been
changed due to a collision or other
impact.
● When equipment such as a towing eye-
let, transport hook, bumper protector,
bumper trim, bicycle carrier or snow-
removal device (snow plow) is installed
near the sensor
● If the front of the vehicle is raised or low-
ered due to the carried load.
● If the vehicle cannot be driven in a stable
manner, such as when the vehicle has
been in an accident or is malfunctioning.
● When tire chains, compact spare tire or
an emergency tire puncture repair kit are
used.
● When towing with the vehicle
■ Situations in which the system may
operate even if there is no possibility of a
collision
In some situations, such as the following, the
system may operate even though there is
no possibility of a collision.
● When driving on a narrow road.
● When driving toward a banner, flag, low-
hanging branch or boom barrier (such as
those used at railroad crossings, toll
gates and parking lots).
● When there is a rut or hole in the surface
of the road.
● When driving on a metal cover (grating),
such as those used for drainage ditches.
● When driving up or down a steep slope.
● If a sensor is hit by a large amount of
water, such as when driving on a flooded
road.
● There is dirt, snow, water drops or ice on
a sensor. (Cleaning the sensors will
resolve this problem.)
● A sensor is coated with a sheet of spray
or heavy rain.
● When driving in inclement weather such
as fog, snow or a sandstorm.
● When strong winds are blowing.
● When vehicle horns, vehicle detectors,
motorcycle engines, air brakes of large
vehicles, the clearance sonar of other
vehicles or other devices which produce
ultrasonic waves are near the vehicle.
● If the front of the vehicle is raised or low-
ered due to the carried load.
276
4-5. Using the driving support systems
● If the orientation of a sensor has been
changed due to a collision or other
impact.
● The vehicle is approaching a tall or
curved curb.
● Driving close to columns (H-shaped steel
beams, etc.) in multi-story parking
garages, construction sites, etc.
● If the vehicle cannot be driven in a stable
manner, such as when the vehicle has
been in an accident or is malfunctioning.
● On an extremely bumpy road, on an
incline, on gravel, or on grass.
● When tire chains, compact spare tire or
an emergency tire puncture repair kit are
used.
● When towing with the vehicle
■ Detection range of the sensors
Approximately 3.3 ft. (100 cm)
Approximately 4.9 ft. (150 cm)
Approximately 2.0 ft. (60 cm)
The diagram shows the detection range of
the sensors. Note that the sensors cannot
detect objects that are extremely close to
the vehicle.
The range of the sensors may change
depending on the shape of the object, etc.
■ The distance and buzzer
Sensor detection display, object
distance
A
B
C
Approximate distance to obstacle Buzzer
Front center sensor:
Approximately 3.3 ft. (100 cm) to 2.0 ft. (60 cm)
*
Rear center sensor:
Approximately 4.9 ft. (150 cm) to 2.0 ft. (60 cm)
*
Slow
Approximately 2.0 ft. (60 cm) to 1.5 ft. (45 cm)
*
Medium
Approximately 1.5 ft. (45 cm) to 1.0 ft. (30 cm)
*
Fast
Approximately less than 1.0 ft. (30 cm) Continuous
277
4-5. Using the driving support systems
4
Driving
*
: Automatic buzzer mute function is enabled. (P.277)
A buzzer sounds when the sensors are
operating.
The buzzer beeps faster as the vehi-
cle approaches a static object.
When the vehicle comes within the
approximately 1.0 ft. (30 cm) of the
object, the buzzer will sound contin-
uously.
When 2 or more sensors simultane-
ously detect a static object, the
buzzer sounds for the nearest
object.
After a buzzer begins sounding, if
the distance between the vehicle
and the detected a static object
does not become shorter, the
buzzer will be muted automatically.
(automatic buzzer mute function)
■ Adjusting the buzzer volume
The buzzer volume of the intuitive parking
assist, and RCTA can all be changed at
once from the customize settings.
(P.468)
■ Muting a buzzer
When the temporary mute switch is dis-
played on the Center Display, this switch
can be pressed to temporarily mute the
buzzer.
Select the switch to mute a buzzer of the
intuitive parking assist and RCTA all
together.
● Mute will be automatically canceled in
the following situations:
• When the shift position is changed.
• When the vehicle speed exceeds a cer-
tain speed.
• When there is a malfunction in a sensor
or the system is temporarily unavailable.
• When the operating function is disabled
manually.
• When the power switch is turned off.
Intuitive parking assist buzzer

Related Topics

Popular Owner Manuals