2019-2026 Lexus UX SUV Using the driving support systems -> Cruise control User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Using the driving support systems -> Cruise control for Your Lexus UX SUV First Generation (2019-2026)

259
4-5. Using the driving support systems
4
Driving
■ Meter display
Set vehicle speed
Cruise control indicator
■ Switches
Driving assist mode select switch
Driving assist switch
“+” switch / “RES” switch
“-” switch
Cancel switch
■ Setting the vehicle speed
1
Press the driving assist mode select
switch to select Cruise Control
Mode.
Cruise control
The vehicle can be driven at a set
speed even if the accelerator pedal
is not depressed.
Use the cruise control only on high-
ways and expressways.
WARNING
■ For safe use
● Driving safely is solely the responsibil-
ity of the driver. Therefore, do not
overly rely on this system. The driver is
solely responsible for paying attention
to the vehicle’s surroundings and driv-
ing safely.
● Set the speed appropriately according
to the speed limit, traffic flow, road
conditions, weather conditions, etc.
The driver is responsible for confirm-
ing the set speed.
■ Situations in which cruise control
should not be used
Do not use the cruise control in the fol-
lowing situations. As the system will not
be able to provide appropriate control,
using it may lead to an accident resulting
in death or serious injury.
● On roads with sharp bends
● On winding roads
● On slippery roads, such as those cov-
ered with rain, ice or snow
● On steep downhills, or where there
are sudden changes between sharp up
and down gradients
Vehicle speed may exceed the set speed
when driving down a steep hill.
● When it is necessary to disable the sys-
tem: P.215
System components
Using the cruise control
A
B
A
B
C
D
E
260
4-5. Using the driving support systems
The cruise control indicator will illuminate.
2 Using the accelerator pedal, accel-
erate to the desired vehicle speed
(approximately 20 mph [30 km/h]
or more), and press the driving
assist switch to set the set vehicle
speed.
The vehicle speed at the moment the
switch is released will be the set vehicle
speed.
■ Adjusting the set vehicle speed
Adjusting the set vehicle speed
using the switches
To change the set vehicle speed, press the
“+” or “-” switch until the desired speed is
displayed.
1 Increase set vehicle speed
2 Decrease set vehicle speed
The set vehicle speed will increase or
decrease as follows:
Fine adjustment: By 1 mph (1.6 km/h) or 1
km/h (0.6 mph) each time the switch is
pressed
Large adjustment: Increases continuously
while the switch is pressed and held
Increasing the set vehicle speed
using the accelerator pedal
1 Depress the accelerator pedal to
accelerate the vehicle to the
desired vehicle speed.
2 Press the “+” switch.
■ Canceling/resuming control
1 Press the cancel switch or driving
assist switch to cancel control.
Control will also be canceled if the brake
pedal is depressed.
2 Press the “RES” switch to resume
control.
261
4-5. Using the driving support systems
4
Driving
■ Automatic cancellation of the cruise
control
In the following situations, the cruise control
will be canceled automatically:
● When the vehicle speed drops approxi-
mately 10 mph (16 km/h) or more below
the set vehicle speed
● When the vehicle speed drops below
approximately 20 mph (30 km/h)
● When the brake control or output
restriction control of a driving support
system operates (For example: PCS,
drive-start control)
● When the parking brake has been oper-
ated
● When the driver’s seat belt is unfastened
● Situations in which some or all of the
functions of the system cannot operate:
P.220
The operating state of cruise control is indicated.
Display and system operation state
Indicator Multi-information display Situation
White
Blank
Cruise control being
OFF
Green
Set vehicle speed:
Green
Constant speed cruis-
ing
Green
Set vehicle speed:
Green in reverse dis-
play
Set vehicle speed
being exceeded

Related Topics

Popular Owner Manuals