2019-2026 Lexus UX SUV Using the driving support systems -> Lexus Safety System +3 User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Using the driving support systems -> Lexus Safety System +3 for Your Lexus UX SUV First Generation (2019-2026)

215
4-5. Using the driving support systems
4
Driving
Lexus Safety System +3
The Lexus Safety System +3 con-
sists of the driving assist systems
and contributes to a safe and com-
fortable driving experience:
WARNING
■ Lexus Safety System +3
The Lexus Safety System +3 operates
under the assumption that the driver will
drive safely, and is designed to help
reduce the impact to the occupants in a
collision and assist the driver under nor-
mal driving conditions.
As there is a limit to the degree of recog-
nition accuracy and control performance
that this system can provide, do not
overly rely on this system. The driver is
solely responsible for paying attention to
the vehicle’s surroundings and driving
safely.
■ For safe use
● Do not overly rely on this system. The
driver is solely responsible for paying
attention to the vehicle’s surroundings
and driving safely. This system may not
operate in all situations and provided
assistance is limited. Over-reliance on
this system to drive the vehicle safely
may lead to an accident resulting in
death or serious injury.
● Do not attempt to test the operation of
the system, as it may not operate prop-
erly, possibly leading to an accident.
● If attention is necessary while perform-
ing driving operations or a system mal-
function occurs, a warning message or
warning buzzer will be operated. If a
warning message is displayed on the
display, follow the instructions dis-
played.
● Depending on external noise, the vol-
ume of the audio system, etc. it may be
difficult to hear the warning buzzer.
Also, depending on the road condi-
tions, it may be difficult to recognize
the operation of the system.
■ When it is necessary to disable the
system
In the following situations, make sure to
disable the system.
Failure to do so may lead to the system
not operating properly, possibly leading
to an accident resulting in death or seri-
ous injury.
● When the vehicle is tilted due to being
overloaded or having a flat tire
● When driving at extremely high
speeds
● When towing another vehicle
● When the vehicle is being transported
by a truck, ship, train, etc.
● When the vehicle is raised on a lift and
the tires are allowed to rotate freely
● When inspecting the vehicle using a
drum tester such as a chassis dyna-
mometer or speedometer tester, or
when using an on vehicle wheel bal-
ancer
● When the vehicle is driven in a sporty
manner or off-road
● When using an automatic car wash
● When a sensor is misaligned or
deformed due to a strong impact
being applied to the sensor or the area
around the sensor
● When accessories which obstruct a
sensor or light are temporarily
installed to the vehicle
● When a compact spare tire or tire
chains are installed to the vehicle or an
emergency tire puncture repair kit has
been used
216
4-5. Using the driving support systems
■ AHB (Automatic High Beam)
P.201
■ PCS (Pre-Collision System)
P.221
■ LTA (Lane Tracing Assist)
P.231
■ LDA (Lane Departure Alert)
P.235
■ PDA (Proactive Driving Assist)
P.241
■ RSA (Road Sign Assist)
*
P.246
■ Dynamic radar cruise control
P.249
■ Cruise control
P.259
■ Emergency Driving Stop System
P.262
*
: If equipped
Various sensors are used to obtain the
necessary information for system
operation.
■ Sensors which detect the sur-
rounding conditions
Front
Front radar sensor
Front camera
Rear
Rear side radar sensors
WARNING
● When the tires are excessively worn or
the inflation pressure of the tires is low
● When tires other than the manufac-
turer specified size are installed
● When the vehicle cannot be driven
stably, due to a collision, malfunction,
etc.
Driving assist system
Sensors used by Lexus Safety
System +3
A
B
A
217
4-5. Using the driving support systems
4
Driving
WARNING
■ To prevent malfunction of the radar
sensors
Observe the following precautions.
Failure to do so may lead to a radar sen-
sor not operating properly, possibly
leading to an accident resulting in death
or serious injury.
● Keep the radar sensors and radar sen-
sor covers clean at all times.
Clean the front of a radar sensor or the
front or back of a radar sensor cover if it
is dirty or covered with water droplets,
snow, etc.
When cleaning the radar sensor and
radar sensor cover, use a soft cloth to
remove dirt so as to not damage them.
Radar sensor
Radar sensor cover
● Do not attach accessories, stickers
(including transparent stickers), alumi-
num tape, etc. to a radar sensor or
radar sensor cover and their sur-
rounding area.
● Do not subject a radar sensor or its
surrounding area to impact.
If a radar sensor, the front grille, or front
bumper has been subjected to a impact,
have the vehicle inspected by your Lexus
dealer.
● Do not disassemble the radar sensors.
A
B
● Do not modify or paint the radar sen-
sors or radar sensor cover, or replace
them with anything other than Lexus
genuine parts.
● In the following situations, recalibra-
tion of the radar sensors will be neces-
sary. For details, contact your Lexus
dealer.
• When a radar sensor is removed and
installed, or replaced
• When the front bumper or the front
grille has been replaced
■ To prevent malfunction of the front
camera
Observe the following precautions.
Failure to do so may lead to the front
camera not operating properly, possibly
leading to an accident resulting in death
or serious injury.
● Always keep the windshield clean.
• If the windshield is dirty or covered
with an oily film, water droplets, snow,
etc., clean the windshield.
• Even if a glass coating agent is applied
to the windshield, it will still be neces-
sary to use the windshield wipers to
remove water droplets, etc. from the
area of the windshield in front of the
front camera.
• If the inner side of the windshield
where the front camera is installed is
dirty, contact your Lexus dealer.
218
4-5. Using the driving support systems
■ Situations in which the sensors may not
operate properly
● When the height or inclination of the
vehicle has been changed due to modifi-
cations
● When the windshield is dirty, fogged up,
WARNING
● Do not attach stickers (including trans-
parent stickers) or other items to the
area of the windshield in front of the
front camera (shaded area in the illus-
tration).
Approximately 1.6 in. (4 cm)
Approximately 1.6 in. (4 cm)
● If the part of the windshield in front of
the front camera is fogged up or cov-
ered with condensation or ice, use the
windshield defogger to remove the
fog, condensation, or ice.
● If water droplets cannot be properly
removed from the area of the wind-
shield in front of the front camera by
the windshield wipers, replace the
wiper insert or wiper blade.
● Do not attach window tint to the wind-
shield.
● Replace the windshield if it is damaged
or cracked.
If the windshield has been replaced,
recalibration of the front camera will be
necessary. For details, contact your
Lexus dealer.
● Do not allow liquids to contact the
front camera.
● Do not allow bright lights to shine into
the front camera.
A
B
● Do not damage the lens of the front
camera or allow it to become dirty.
When cleaning the inside of the wind-
shield, do not allow glass cleaner to con-
tact the lens of the front camera. Do not
touch the lens of the front camera.
If the lens of the front camera is dirty or
damaged, contact your Lexus dealer.
● Do not subject the front camera to a
strong impact.
● Do not change the position or orienta-
tion of the front camera or remove it.
● Do not disassemble the front camera.
● Do not modify any parts around the
front camera, such as the inside rear
view mirror or ceiling.
● Do not attach accessories which may
obstruct the front camera to the hood,
front grille, or front bumper. For
details, contact your Lexus dealer.
● If a surfboard or other long object is to
be mounted on the roof, make sure
that it will not obstruct the front cam-
era.
● Do not modify or change the head-
lights and other lights.
■ Front camera installation area on the
windshield
If the system determines that the wind-
shield may be fogged up, it will automati-
cally operate the heater to defog the part
of the windshield around the front cam-
era. When cleaning, etc., be careful not
to touch the area around the front cam-
era until the windshield has cooled suffi-
ciently, as touching it may cause burns.
219
4-5. Using the driving support systems
4
Driving
cracked or damaged
● When the ambient temperature is high or
low
● When mud, water, snow, dead insects,
foreign matter, etc., is attached to the
front of the sensor
● When in inclement weather such as
heavy rain, fog, snow, or a sandstorm
● When water, snow, dust, etc. is thrown up
in front of the vehicle, or when driving
through mist or smoke
● When the headlights are not illuminated
while driving in the dark, such as at night
or when in a tunnel
● When the lens of a headlight is dirty and
illumination is weak
● When the headlights are misaligned
● When a headlight is malfunctioning
● When the headlights of another vehicle,
sunlight, or reflected light shines directly
into the front camera
● When the brightness of the surrounding
area changes suddenly
● When driving near a TV tower, broad-
casting station, electric power plant,
radar equipped vehicles, etc., or other
location where strong radio waves or
electrical noise may be present
● When a wiper blade is blocking the front
camera
● When in a location or near objects which
strongly reflect radio waves, such as the
following:
• Tunnels
• Truss bridges
• Gravel roads
• Rutted, snow-covered roads
• Walls
• Large trucks
• Manhole covers
• Guardrail
• Metal plates
● When near a step or protrusion
● When a detectable vehicle is narrow,
such as a small mobility vehicle
● When a detectable vehicle has a small
front or rear end, such as an unloaded
truck
● When a detectable vehicle has a low
front or rear end, such as a low bed trailer
● When a detectable vehicle has extremely
high ground clearance
● When a detectable vehicle is carrying a
load which protrudes from its cargo area
● When a detectable vehicle has little
exposed metal, such as a vehicle which is
partially covered with cloth, etc.
● When a detectable vehicle is irregularly
shaped, such as a tractor, sidecar, etc.
● When the distance between the vehicle
and a detectable vehicle has become
extremely short
● When a detectable vehicle is at an angle
● When snow, mud, etc. is attached to a
detectable vehicle
● When driving on the following kinds of
roads:
• Roads with sharp curves or winding
roads
• Roads with changes in grade, such as
sudden inclines or declines
• Roads which is sloped to the left or right
• Roads with deep ruts
• Roads which are rough and unmain-
tained
• Roads which frequently undulate or are
bumpy
● When the steering wheel is being oper-
ated frequently or suddenly
● When the vehicle is not in a constant
220
4-5. Using the driving support systems
position within a lane
● When parts related to this system, the
brakes, etc. are cold or extremely hot,
wet, etc.
● When the wheels are misaligned
● When driving on slick road surfaces, such
as when it is covered with ice, snow,
gravel, etc.
● When the course of the vehicle differs
from the shape of a curve
● When the vehicle speed is excessively
high when entering a curve
● When entering/exiting a parking lot,
garage, car elevator, etc.
● When driving in a parking lot
● When driving through an area where
there are obstructions which may contact
your vehicle, such as tall grass, tree
branches, a curtain, etc.
● When driving in strong wind
■ Situations in which the lane may not be
detected
● When the lane is extremely wide or nar-
row
● Immediately after changing lanes or
passing through an intersection
● When driving in a temporary lane or lane
regulated by construction
● When there are structures, patterns,
shadows which are similar to lane lines in
the surrounding
● When there are multiple white lines for a
lane line
● When the lane lines are not clear or driv-
ing on a wet road surface
● When a lane line is on a curb
● When driving on a bright, reflective road
surface, such as concrete
■ Situations in which some or all of the
functions of the system cannot operate
● When a malfunction is detected in this
system or a related system, such as the
brakes, steering, etc.
● When the VSC, TRAC, or other safety
related system is operating
● When the VSC, TRAC, or other safety
related system is off
■ Changes in brake operation sound and
pedal response
● When the brakes have been operated,
brake operation sounds may be heard
and the brake pedal response may
change, but this does not indicate a mal-
function.
● When the system is operating, the brake
pedal may feel stiffer than expected or
sink. In either situation the brake pedal
can be depressed further. Further
depress the brake pedal as necessary.

Related Topics

Popular Owner Manuals