2019-2026 Lexus UX SUV Using the driving support systems -> RCTA (Rear Cross Traffic Alert) function User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Using the driving support systems -> RCTA (Rear Cross Traffic Alert) function for Your Lexus UX SUV First Generation (2019-2026)

278
4-5. Using the driving support systems
Center Display
Turning the RCTA function on/off in Cen-
ter Display
If a vehicle approaching from the right or
left at the rear of the vehicle is detected,
the RCTA icon (P.279) for the detected
side will be displayed on the Center Dis-
play. This illustration
*
shows an example of
a vehicle approaching from both sides of
the vehicle.
*
: Depending on the vehicle grade and
equipped options, the actual screen may
be different from this illustration.
Outside rear view mirror indicators
If a vehicle is detected as approaching
from the left or right behind the vehicle,
both outside rear view mirror indicators
(P.81) will blink and a buzzer will sound.
Driving assist information indicator
Illuminates when the RCTA is turned off.
At this time, a message will be displayed on
the multi-information display.
The RCTA can be enabled/disabled
through a customize setting.
(P.468)
When the RCTA function is off, the
driving assist information indicator
(P.81) will illuminate and a message
will be displayed on the multi-informa-
tion display. Each time the power
switch is turned to ON, the RCTA
function is enabled.
■ Outside rear view mirror indicator visi-
bility
In strong sunlight, the outside rear view mir-
RCTA (Rear Cross Traffic
A
lert) function
The RCTA function uses the BSM
rear side radar sensors installed
behind the rear bumper. This func-
tion is intended to assist the driver
in checking areas that are not easily
visible when backing up.
WARNING
■ Cautions regarding the use of the
system
The driver is solely responsible for safe
driving. Always drive safely, taking care
to observe your surroundings.
The RCTA function is only a supplemen-
tary function which alerts the driver that a
vehicle is approaching from the right or
left at the rear of the vehicle.
As the RCTA function may not function
correctly under certain conditions, the
driver’s own visual confirmation of safety
is necessary.
Over reliance on this function may lead
to an accident resulting death or serious
injury.
■ To ensure the system can operate
properly
P.265
System components
Turning the RCTA function
on/off
A
B
C
279
4-5. Using the driving support systems
4
Driving
ror indicator may be difficult to see.
■ Hearing the RCTA buzzer
The RCTA buzzer may be difficult to hear
over loud noises, such as if the audio system
volume is high.
■ Rear side radar sensors
P.265
■ Operation of the RCTA function
The RCTA function uses rear side
radar sensors to detect vehicles
approaching from the right or left at
the rear of the vehicle and alerts the
driver of the presence of such vehicles
by flashing the outside rear view mirror
indicators and sounding a buzzer.
Approaching vehicles
Detection areas of approaching
vehicles
■ RCTA icon display
When a vehicle approaching from the
right or left at the rear of the vehicle is
detected, the following will be dis-
played on the Center Display.
Example (Lexus parking assist mon-
itor): Vehicles are approaching
from both sides of the vehicle
■ RCTA function detection areas
The areas that vehicles can be
detected in are outlined below.
The buzzer can alert the driver of
faster vehicles approaching from far-
ther away.
Example:
■ The RCTA function is operational when
The RCTA function operates when all of the
following conditions are met:
● The power switch is in ON.
● The RCTA function is on.
● The shift position is in R.
● The vehicle speed is less than approxi-
RCTA function
A
B
Approaching vehi-
cle speed
Approximate
alert distance
34 mph (56 km/h)
(fast)
98 ft. (30 m)
5 mph (8 km/h)
(slow)
13 ft. (4 m)
A
280
4-5. Using the driving support systems
mately 9 mph (15 km/h).
● The approaching vehicle speed is
between approximately 5 mph (8 km/h)
and 34 mph (56 km/h).
■ Setting the buzzer volume
The buzzer volume of the RCTA and intui-
tive parking assist can be adjusted all
together through a customize setting.
(P.468)
■ Muting a buzzer temporarily
When an object is detected, the temporary
mute switch is displayed on the Center Dis-
play.
Select the switch to mute the buzzer of the
intuitive parking assist and RCTA all
together.
Mute will be canceled automatically in the
following situations:
● When the shift position is changed.
● When the vehicle speed exceeds a cer-
tain speed.
● When there is a malfunction in a sensor
or the system is temporarily unavailable.
● When the operating function is disabled
manually.
● When the power switch is turned off.
■ Conditions under which the system will
not detect a vehicle
The RCTA function is not designed to
detect the following types of vehicles
and/or objects:
● Vehicles approaching from directly
behind
● Vehicles backing up in a parking space
next to your vehicle
● Vehicles that the sensors cannot detect
due to obstructions
● Guardrails, walls, signs, parked vehicles
and similar stationary objects
*
● Small motorcycles, bicycles, pedestrians,
etc.
*
● Vehicles moving away from your vehicle
● Vehicles approaching from the parking
spaces next to your vehicle
*
● The distance between the sensor and
approaching vehicle gets too close
*
: Depending on the conditions, detection
of a vehicle and/or object may occur.
■ Situations in which the system may not
operate properly
The RCTA function may not detect vehicles
correctly in the following situations:
● When the sensor is misaligned due to a
strong impact to the sensor or its sur-
rounding area.
● When mud, snow, ice, a sticker, etc., is
covering the sensor or surrounding area
on the position above the rear bumper.
● When driving on a road surface that is
wet with standing water during bad
weather, such as heavy rain, snow, or fog.
● When multiple vehicles are approaching
with only a small gap between each vehi-
cle.
● When a vehicle is approaching at high
speed.
● When equipment that may obstruct a
sensor is installed, such as a towing eye-
let, bumper protector (an additional trim
strip, etc.), bicycle carrier, or snow plow.
● When backing up on a slope with a sharp
change in grade.
281
4-5. Using the driving support systems
4
Driving
● When backing out of a sharp angle park-
ing spot.
● Immediately after the RCTA function is
turned on
● Immediately after the hybrid system is
started with the RCTA function on
● When the sensors cannot detect a vehi-
cle due to obstructions
● When towing with the vehicle
● When there is a significant difference in
height between your vehicle and the
vehicle that enters the detection area.
● When a sensor or the area around a sen-
sor is extremely hot or cold.
● If the suspension has been modified or
tires of a size other than specified are
installed.
● If the front of the vehicle is raised or low-
ered due to the carried load.
● When turning while backing up.
● When a vehicle turns into the detection
area.
■ Situations in which the system may
operate even if there is no possibility of a
collision
Instances of the RCTA function unneces-
sary detecting a vehicle and/or object may
increase in the following situations:
● When the parking space faces a street
and vehicles are being driven on the
street.
● When the distance between your vehicle
and metal objects, such as a guardrail,
wall, sign, or parked vehicle, which may
reflect electrical waves toward the rear of
the vehicle, is short.
282
4-5. Using the driving support systems
● When equipment that may obstruct a
sensor is installed, such as a towing eye-
let, bumper protector (an additional trim
strip, etc.), bicycle carrier, or snow plow.
● When a vehicle passes by the side of your
vehicle.
● When a detected vehicle turns while
approaching the vehicle.
● When there are spinning objects near
your vehicle such as the fan of an air con-
ditioning unit.
● When water is splashed or sprayed
toward the rear bumper, such as from a
sprinkler.
● Moving objects (flags, exhaust fumes,
large rain droplets or snowflakes, rain
water on the road surface, etc.).
● When the distance between your vehicle
and a guardrail, wall, etc., that enters the
detection area is short.
● Gratings and gutters.
● When a sensor or the area around a sen-
sor is extremely hot or cold.
● If the suspension has been modified or
tires of a size other than specified are
installed.
● If the front of the vehicle is raised or low-
ered due to the carried load.
● When towing with the vehicle.
*
: If equipped
The system has detected the following
as operation targets. (The operation
targets vary depending on the func-
tion.)
Parking Support Brake function
(static objects front and rear of the
vehicle):P.286
Parking Support Brake function
(moving vehicles rear of the vehi-
cle):P.289
PKSB (Parking Support
B
rake)
*
The PKSB (Parking Support Brake)
is a system that issues warnings and
automatically performs braking to
help reduce collision damage with
operation targets that were
detected when traveling at a low
speed such as when parking.
PKSB (Parking Support Brake)
system
WARNING
■ Cautions regarding the use of the
system
Do not overly rely on the system, as
doing so may lead to an accident.
Always drive while checking the safety of
the surroundings of the vehicle.
Depending on the vehicle and road con-
ditions, weather, etc., the system may not
operate.
The detection capabilities of sensors and
radars are limited. Always drive while
checking the safety of the surroundings
of the vehicle.

Related Topics

Popular Owner Manuals