
288
4-5. Using the driving support systems
• There is a static object in the traveling
direction of the vehicle and approxi-
mately 6 to 13 ft. (2 to 4 m) away.
• The Parking Support Brake determines
that a stronger-than-normal brake oper-
ation is necessary to avoid a collision.
● Brake control
• Hybrid system output restriction control
is operating.
• The Parking Support Brake determines
that an immediate brake operation is
necessary to avoid a collision.
■ The Parking Support Brake function
(static objects front and rear of the vehi-
cle) will stop operating when
The function will stop operating if any of the
following conditions are met:
● Hybrid system output restriction control
• The Parking Support Brake is disabled.
• The system determines that the collision
has become avoidable with normal brake
operation.
• The static object is no longer approxi-
mately 6 to 13 ft. (2 to 4 m) away from the
vehicle or in the traveling direction of the
vehicle.
● Brake control
• The Parking Support Brake is disabled.
• Approximately 2 seconds have elapsed
since the vehicle was stopped by brake
control.
• The brake pedal is depressed after the
vehicle is stopped by brake control.
• The static object is no longer approxi-
mately 6 to 13 ft. (2 to 4 m) away from the
vehicle or in the traveling direction of the
vehicle.
■ Detection range of the Parking Support
Brake function (static objects front and
rear of the vehicle)
The detection range of the Parking Support
Brake function (static objects front and rear
of the vehicle) differs from the detection
range of the intuitive parking assist.
(P.276) Therefore, even if the intuitive
parking assist detects an object and pro-
vides a warning, the Parking Support Brake
function (static objects front and rear of the
vehicle) may not start operating.
■ Situations in which the system may not
operate properly
P.274
■ Situations in which the system may
operate even if there is no possibility of a
collision
P.275