2006-2014 Nissan Qashqai SUV Pre-driving checks and adjustments User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Pre-driving checks and adjustments for Your Nissan Qashqai SUV First Generation (2006-2014)

3 Pre-driving checks and adjustments  
Keys........................................................................ 3-2  
NISSAN Anti-Theft System (NATS)* key............. 3-2  
Intelligent Key (where fitted)................................ 3-2  
Key number........................................................ 3-3  
New keys ........................................................... 3-3  
Emergency/mechanical key (Intelligent Key  
models) .............................................................. 3-3  
Integrated keyfob/remote control system.................. 3-3  
Switching from Convenience mode to  
Anti-hijack mode ................................................. 3-4  
Using the remote keyless entry system................ 3-5  
Locking the doors............................................... 3-5  
Unlocking the doors............................................ 3-5  
Keyfob operation failure ...................................... 3-6  
Intelligent Key system (where fitted) ......................... 3-6  
Intelligent Key operating range............................ 3-6  
Using Intelligent Key system................................ 3-7  
Locking/unlocking .............................................. 3-7  
Starting the engine with the Intelligent Key .......... 3-8  
Door locks............................................................... 3-9  
Super Lock system (RHD models)...................... 3-9  
Locking/unlocking with the key (vehicle dead  
Inside door handle .............................................. 3-10  
Power door lock switch ...................................... 3-10  
Child safety lock — rear doors............................ 3-11  
Back door lock ................................................... 3-12  
Security system ....................................................... 3-13  
Alarm system (where fitted) ................................ 3-13  
NISSAN Anti-Theft System (NATS)..................... 3-13  
Bonnet release ........................................................ 3-14  
Fuel filler lid ............................................................. 3-15  
Fuel filler lid opener lever .................................... 3-15  
Fuel filler cap...................................................... 3-15  
Handbrake lever ...................................................... 3-16  
Steering wheel......................................................... 3-16  
Sun visors ............................................................... 3-17  
Mirrors..................................................................... 3-17  
Inside rear-view mirror ........................................ 3-17  
Automatic anti-dazzling inside mirror (where  
fitted).................................................................. 3-17  
Outside rear-view mirrors.................................... 3-17  
Vanity mirror ....................................................... 3-19  
battery)............................................................... 3-9  
Downloaded from manuals search engine  
KEYS  
–
–
The Intelligent Key is water resistant; how-  
ever, wetting may damage the Intelligent  
Key. If the Intelligent Key gets wet, imme-  
diately wipe until it is completely dry.  
NISSAN ANTI-THEFT SYSTEM  
(NATS)* KEY  
Your vehicle can only be driven with the keys spe-  
cific to your vehicle. Only NISSAN Anti-Theft Sys-  
tem (NATS)* keys can be used with your vehicle  
(see “Security system” later in this section).  
Do not allow the Intelligent Key to come  
into contact with water or salt water this  
could affect the system function.  
INTELLIGENT KEY (where fitted)  
–
–
Do not bend, drop or strike it against an-  
other object.  
Your vehicle can only be driven with the Intelligent  
Keys, which are registered to your vehicle’s Intelli-  
gent Key system components and NISSAN Anti-  
Theft System (NATS*) components. As many as 4  
Intelligent Keys can be registered and used with  
one vehicle. The new keys must be registered by a  
NISSAN dealer or qualified workshop prior to use  
with the Intelligent Key system and NATS of your  
vehicle. Since the registration process requires  
erasing all memory in the Intelligent Key compo-  
nents when registering new keys, be sure to take all  
Intelligent Keys that you have to the NISSAN dealer  
or qualified workshop.  
NPA1052  
Do not place the Intelligent Key for an ex-  
tended period in a place where tempera-  
tures exceed 60°C (140°F).  
Integrated keyfob and key number plate  
–
Do not change or modify the Intelligent  
Key.  
–
–
Do not use a magnetic key holder.  
Do not place the Intelligent Key near equip-  
ment that produces a magnetic field such  
as a TV, audio equipment and personal  
computers.  
NPA1049  
*: Immobilizer  
If an Intelligent Key is lost or stolen, NISSAN  
recommends erasing the ID code of that In-  
telligent Key. This will prevent the Intelligent  
Key from unauthorised use to unlock the ve-  
hicle. For information regarding the erasing  
procedure, please contact a NISSAN dealer  
or qualified workshop.  
•
Intelligent Key with emergency/mechanical key  
CAUTION  
Intelligent Key  
1.  
2.  
Be sure to carry the Intelligent Key with you.  
Do not leave the vehicle with the Intelligent  
Key inside.  
•
Emergency/Mechanical key (inside the Intel-  
ligent Key), see “Emergency/mechanical key  
(Intelligent Key models)” later in this section  
Be sure to carry the Intelligent Key with you  
•
Key number plate  
3.  
when driving. The Intelligent Key is a preci-  
sion device with a built-in transmitter. To avoid  
damaging it, please note the following.  
3-2 Pre-driving checks and adjustments  
Downloaded from manuals search engine  
INTEGRATED KEYFOB/REMOTE  
CONTROL SYSTEM  
KEY NUMBER  
EMERGENCY/MECHANICAL KEY  
(Intelligent Key models)  
A key number plate j3 is supplied with your key  
Record the key number on the “Security Informa-  
tion” page at the end of this manual and keep it in a  
safe place, but not in the vehicle. The key can only  
be duplicated using an original key or the original  
key number. The key number is required when you  
have lost all of the keys and do not have the original  
key to duplicate from. If the key is lost, or you need  
extra keys, provide an original key or the key number  
to a NISSAN dealer or qualified workshop.  
NPA1082  
Integrated keyfob  
NPA1050  
NISSAN does not record key numbers, so it is very  
important that you keep a record of your key num-  
ber.  
The emergency key can be used to unlock the driv-  
er’s door and start the engine in emergency situa-  
tions (e.g. Intelligent Key dead battery).  
NEW KEYS  
As many as four NATS keys can be registered to  
one vehicle at any one time. New keys must be reg-  
istered to the NATS components of your vehicle by  
a NISSAN dealer.  
To use the mechanical key, release the lock knob  
located on the side of the Intelligent Key then slide  
and remove the cap. Unfold the mechanical key from  
its housing until it locks in place.  
NPA1083  
When registering a new key at a NISSAN dealer,  
you are requested to bring all of your NATS keys  
with you. This is necessary because the registration  
process will erase and reprogram the memory of  
your vehicle’s NATS components.  
Use the mechanical key to lock or unlock the doors.  
(See “Door locks” later in this section.)  
Intelligent key  
The remote keyless entry system can operate all  
door locks (including the back door) using the inte-  
grated keyfob. The integrated keyfob can operate at  
a distance of approximately 5 m (15 ft) from the  
vehicle (the effective distance depends upon the  
conditions around the vehicle and the state of the  
keyfob battery).  
For further details on accessing and using the emer-  
gency key, see “Ignition knob (where fitted)” in the  
“5. Starting and driving” section.  
NOTE  
NOTE  
A key number is only required if you have lost all  
of your keys and do not have one to duplicate  
from. If you still have a key, this key can be dupli-  
cated by a NISSAN dealer.  
For the driver side door, it is normal for the key  
not to go all the way into the key cylinder.  
As many as 5 remote controllers can be used with  
one vehicle. For information about the purchase and  
Pre-driving checks and adjustments 3-3  
Downloaded from manuals search engine  
use of additional remote controllers, contact a  
NISSAN dealer or qualified workshop.  
Always remove the ignition key or Intelligent  
Key, close all windows before operating the  
keyfob door lock system.  
•
•
SWITCHING FROM CONVENIENCE  
MODE TO ANTI-HIJACK MODE  
The integrated keyfob will not function under the fol-  
lowing conditions:  
Selective unlock or “Anti-hijack” mode allows the  
remote unlocking of only the driver’s door to prevent  
an attacker from entering the vehicle via an unlocked  
passenger door.  
Ensure that the driver’s door is securely  
closed before operating the integrated keyfob  
door lock system for correct operation of the  
system.  
When the distance between the integrated key-  
fob and vehicle is more than approximately 5 m  
(15 ft).  
•
As default, the unlock mode will be set to “Conve-  
nience” mode (all doors will unlock). Follow the in-  
structions below to switch between convenience  
mode and anti-hijack mode.  
Do not allow the integrated keyfob, which  
contains electrical components, to come into  
contact with water or salt water. This could  
affect the system function.  
•
When the integrated keyfob battery is  
discharged.  
•
When the key is in the ignition switch.  
•
jA Key with integrated keyfob (from  
outside the vehicle)  
All doors can be locked or unlocked from the out-  
Do not drop the integrated keyfob.  
•
•
side by pressing the “LOCK”  
button on the integrated keyfob.  
or “UNLOCK”  
Do not strike the integrated keyfob sharply  
against another object.  
1. Turn the ignition switch to the “OFF” position.  
For Super Lock system models only (RHD mod-  
els):  
2. Press and hold both the “LOCK”  
LOCK” buttons for 5 seconds.  
and “UN-  
Do not place the integrated keyfob for an ex-  
tended period in an area where temperatures  
exceed 60°C (140°F).  
•
When the vehicle is occupied, never lock the  
doors with the integrated keyfob. Doing so will  
trap the occupants, since the Super Lock system  
prevents the doors from being opened from the  
inside.  
Setting anti-hijack mode:  
The direction indicators flash once.  
Setting convenience mode:  
The direction indicators flash three times.  
–
If a integrated keyfob is lost or stolen, NISSAN rec-  
ommends erasing the ID code of that integrated  
keyfob from the vehicle. This may prevent the unau-  
thorised use of the integrated keyfob to unlock the  
vehicle. For information regarding the erasing pro-  
cedure, contact a NISSAN dealer or qualified work-  
shop.  
–
jB Intelligent Key  
WARNING  
1. Turn the ignition switch from ON to LOCK and  
exit the vehicle.  
Only operate the integrated keyfob lock button in  
full and clear view of the vehicle to prevent any-  
body being trapped inside the vehicle.  
For information regarding the replacement of a bat-  
tery, see “Battery” in the “8. Maintenance and  
do-it-yourself” section.  
2. From outside the vehicle, lock the vehicle using  
the integrated keyfob “LOCK” button  
.
CAUTION  
3. Press and hold both the “LOCK”  
and “UN-  
When locking the doors using the integrated  
keyfob, be sure not to leave the key in the  
vehicle.  
•
LOCK”  
buttons for 10 seconds.  
4. Within 3 seconds, press and hold the driver’s  
3-4 Pre-driving checks and adjustments  
Downloaded from manuals search engine  
door outside lock switch until the direction indi-  
cators flash to confirm the setting mode. Then  
release the driver’s door outside lock switch.  
Setting convenience mode:  
LOCKING THE DOORS  
–
The message [All door unlock] appears on  
the vehicle information display (inside the ve-  
hicle).  
CAUTION  
Before operating the keyfob remote control:  
Remove the ignition key or Intelligent Key  
from the vehicle and close all windows.  
•
See “Warning/indicator lights and audible  
reminders” in the “2. Instruments and controls” sec-  
tion and “Vehicle information display” in the “2. In-  
struments and controls” section for further details.  
Check that the driver’s door is securely  
closed.  
•
Push the “LOCK” button  
fob.  
on the integrated key-  
USING THE REMOTE KEYLESS  
ENTRY SYSTEM  
–
–
All the doors lock.  
The direction indicators flash once.  
is pushed with all the doors  
NPA1041  
WARNING  
Super Lock system equipped models:  
If the “LOCK” button  
5. Setting anti-hijack mode:  
Failure to follow the precautions below may lead  
to hazardous situations. Make sure the Super  
Lock system activation is always conducted  
safely.  
locked, the direction indicators will flash once to  
remind you that the doors are already locked.  
–
The message [Single door unlock] appears  
on the vehicle information display (inside the  
vehicle).  
UNLOCKING THE DOORS  
Convenience mode  
When the vehicle is occupied, never lock the  
•
doors with the integrated keyfob. Doing so  
will trap the occupants, since the Super Lock  
system prevents the doors from being opened  
from the inside of the vehicle.  
Push the “UNLOCK” button  
keyfob.  
on the integrated  
–
The message [All door unlock] appears in the  
vehicle information display.  
Only operate the integrated keyfob “LOCK”  
•
–
–
All doors unlock.  
button when there is a clear view of the ve-  
hicle. This is to prevent anybody from being  
trapped inside the vehicle through the Super  
Lock system activation.  
The direction indicators flash twice.  
NPA1040  
Anti-hijack mode  
1. Push the “UNLOCK” button  
keyfob.  
on the integrated  
For further details on the Super Lock system see  
“Super Lock system (RHD models)” later in this  
section.  
Pre-driving checks and adjustments 3-5  
Downloaded from manuals search engine  
INTELLIGENT KEY SYSTEM  
(where fitted)  
–
The message [Single door unlock] appears in  
the vehicle information display.  
–
–
Only the driver’s door unlocks.  
The direction indicators flash twice, quickly.  
2. Push the “UNLOCK” button  
keyfob again.  
on the integrated  
–
–
All doors unlock.  
The direction indicators flash twice.  
NPA1042  
NPA1018  
Auto-relock:  
NOTE  
The Intelligent Key system is a convenient keyless  
entry system that allows you to operate your vehicle  
without using an actual key.  
An auto-relock function will operate 2 minutes after  
a full or partial unlock, if no further user action is  
taken. The auto-relock will be cancelled if any door  
is opened or the key is inserted into the ignition.  
See Intelligent Key detection warning, Intelligent  
Key low battery warning or Intelligent Key system  
fault warning in “Vehicle information display” ear-  
lier in this section for more information.  
WARNING  
KEYFOB OPERATION FAILURE  
Radio waves could adversely affect electric medi-  
cal equipment. Those who use a pacemaker  
should contact the electric medical equipment  
manufacturer for the possible influences before  
use.  
The keyfob may not work properly if:  
The keyfob battery is low. See “Integrated key-  
•
fob/Intelligent Key battery replacement” in the  
“8. Maintenance and do-it-yourself” section for  
keyfob battery replacement instructions and the  
required battery type.  
INTELLIGENT KEY OPERATING  
RANGE  
The locking/unlocking system has been used  
•
The Intelligent Key functions can only be used when  
the Intelligent Key is within the specified operating  
range from the request switch j1 .  
continuously. An anti lock-abuse system pre-  
vents the lock motors from overheating and dis-  
ables the keyfob locking operation for a short  
period of time if the system is used continuously.  
When the Intelligent Key battery is discharged or  
strong radio waves are present near the operating  
location, the Intelligent Key system’s operating  
range becomes narrower, and the Intelligent Key  
may not function properly.  
The door handle is being pulled while the  
keyfob is being operated.  
•
The vehicle’s battery is dead.  
•
3-6 Pre-driving checks and adjustments  
Downloaded from manuals search engine  
The operating range is within 80 cm (31.50 in) from  
each request switch j1 .  
LOCKING/UNLOCKING  
If the Intelligent Key is too close to the door glass,  
door handle or rear bumper, the request switches  
may not function.  
When the Intelligent Key is within the operating  
range, it is possible for anyone, even someone who  
does not carry the Intelligent Key, to push the re-  
quest switch to lock/unlock the doors including the  
back door.  
NPA1020  
NPA1021  
USING INTELLIGENT KEY SYSTEM  
Do not push the door handle request switch with  
the Intelligent Key held in your hand as illustrated.  
The close distance to the door handle will cause  
the Intelligent Key system to have difficulty rec-  
ognising that the Intelligent Key is outside the  
vehicle.  
•
•
After locking the doors using the door handle  
request switch, make sure that the doors have  
been securely locked by operating the door  
handles.  
NPA1019  
NPA1022  
To prevent the Intelligent Key from being left in-  
side the vehicle, make sure you carry the key  
with you and then lock the doors.  
•
•
The request switch will not function under the fol-  
lowing conditions:  
The Intelligent Key system allows you to lock and  
unlock the driver’s door, passenger doors, or back  
door without activating the integrated keyfob or us-  
ing the emergency key (driver’s door key cylinder).  
Do not pull the door handle before pushing the  
door handle request switch. The door will be  
unlocked but will not open. Release the door  
handle once and pull it again to open the door.  
When the Intelligent Key is left inside the vehicle  
•
•
When the Intelligent Key is not within the opera-  
tional range  
When near the vehicle, the Intelligent Key sends an  
ID code that allows the owner to manually lock/un-  
lock the vehicle by pressing the driver’s door, front  
passenger’s door or back door outside lock switch.  
When any door is open or not closed securely  
•
•
When the Intelligent Key battery is discharged  
Pre-driving checks and adjustments 3-7  
Downloaded from manuals search engine  
Convenience mode:  
The Intelligent Key contains a miniature radio  
transmitter that may be affected when placed  
near metal objects.  
•
•
Locking the doors  
Push the door/back door outside lock switch.  
1. Make sure you have the Intelligent Key with you  
when exiting the vehicle.  
–
–
–
All doors unlock.  
Keep the Intelligent Key away from mobile  
phones, laptop computers and other metal  
objects or electronics.  
2. Close all doors.  
The direction indicators flash twice.  
3. Press any of the outside lock switches (front  
doors or back door).  
The message [All door unlock] appears in the  
vehicle information display.  
STARTING THE ENGINE WITH THE  
INTELLIGENT KEY  
–
–
–
All the doors lock.  
Anti-hijack mode:  
The direction indicators flash once.  
1. Push the door/back door outside lock switch.  
See “Ignition knob (where fitted)” in the “5. Starting  
and driving” section.  
Super Lock system equipped models: The Su-  
–
–
–
The corresponding door unlocks  
per Lock system will be activated  
CAUTION  
The direction indicators flash twice quickly  
CAUTION  
Make sure you carry the Intelligent Key with  
you when starting and driving the vehicle.  
•
The message [Single door unlock] appears in  
the vehicle information display.  
Do not leave the duplicate Intelligent Key inside  
the vehicle as the locking procedure logic will  
not work.  
If the Intelligent Key is too far away from the  
•
2. Push the door/back door outside lock switch  
again within 5 seconds.  
passenger compartment, the vehicle may not  
start. See “Intelligent Key operating range” in  
the “3. Pre-driving checks and adjustments”  
section  
NOTE  
–
–
All doors unlock.  
If the Intelligent Key is left in the vehicle and the  
door/back door outside lock switch is pressed, a  
buzzer will sound, warning the owner that the  
Intelligent Key has been left inside the vehicle.  
The direction indicators flash twice, slowly.  
NOTE  
External interference may impair the Intelligent  
Key’s operation. In this case, use the emergency  
key located in the Intelligent Key integrated key-  
fob. See “Door locks” later in this section for fur-  
ther details.  
Unlocking the doors  
For details on setting the unlock mode (anti-hijack or  
convenience mode) see “Switching from Conve-  
nience mode to Anti-hijack mode” earlier in this sec-  
tion.  
CAUTION  
Make sure the Intelligent Key battery is in good  
•
condition. Note that battery life may vary de-  
pending on condition, amount of use, ambi-  
ent temperature, etc.  
3-8 Pre-driving checks and adjustments  
Downloaded from manuals search engine  
DOOR LOCKS  
SUPER LOCK SYSTEM (RHD models)  
Emergency situations  
Locking without activating the Super  
Lock system  
If the Super Lock system is activated while you are  
inside the vehicle, for example by a traffic accident  
or other unexpected circumstances, follow the in-  
structions below.  
WARNING  
WARNING  
Super Lock system equipped models:  
Do not leave the key inside the vehicle when leav-  
ing the vehicle.  
Failure to follow the precautions below may lead  
to hazardous situations. Make sure the Super  
Lock system activation is always conducted  
safely.  
To release the Super Lock system:  
–
Insert the key into the ignition switch and turn it  
to the ON position.  
Locking the doors using the door key cylinder or  
power door lock switch will not activate the Super  
Lock system. See “Power door lock switch” later in  
this section for further information.  
When the vehicle is occupied, never lock the  
•
All doors can now be unlocked and opened from  
inside the vehicle.  
doors with the integrated keyfob. Doing so  
will trap the occupants, since the Super Lock  
system prevents the doors from being opened  
from the inside of the vehicle.  
LOCKING/UNLOCKING WITH THE  
KEY (vehicle dead battery)  
–
Remove the key from the ignition switch and un-  
lock the doors using the integrated keyfob “UN-  
LOCK” button  
.
Only operate the integrated keyfob “LOCK”  
•
All doors can now be opened from inside the  
vehicle.  
button when there is a clear view of the ve-  
hicle. This is to prevent anybody from being  
trapped inside the vehicle through the Super  
Lock system activation.  
To unlock and open the driver’s door from  
inside the vehicle while the Super Lock system  
is active:  
Pressing the “LOCK” button  
on the integrated  
1. Open or break the driver’s door window.  
keyfob or locking the doors using one of the outside  
door lock switches (Intelligent Key models) will acti-  
vate the Super Lock system.  
2. Insert the key into the outside door key cylinder  
and turn it towards the rear of the vehicle.  
NPA828Z  
When the Super Lock system is active, none of the  
doors can be opened from inside the vehicle. This  
provides additional security in case of theft or break-  
in.  
3. The driver’s door will unlock and can now be  
opened from inside the vehicle.  
WARNING  
When leaving the vehicle, do not leave the key  
inside the vehicle.  
•
The Super Lock system will be released when all  
the doors are unlocked using the integrated keyfob  
or an outside door lock switch (Intelligent Key mod-  
els).  
Never leave children unattended in a vehicle  
•
and always be sure you have your keys with  
you when leaving. If an emergency occurs it  
may be more difficult to help them otherwise.  
Pre-driving checks and adjustments 3-9  
Downloaded from manuals search engine  
The driver’s door can be locked/unlocked from out-  
side using the key/emergency key if the vehicle’s  
battery is dead.  
Press to unlock  
j2  
INSIDE DOOR HANDLE  
WARNING  
To lock the door, insert the key into the driver’s door  
key cylinder and turn it towards the front of the ve-  
hicle j1 .  
When leaving the vehicle, do not leave the key  
inside the vehicle.  
The power door lock switch, located on the centre  
console, can be used to lock j1 or unlock j2 all  
doors simultaneously from inside the vehicle.  
To unlock the door, turn the key towards the rear of  
the vehicle j2 .  
See “Ignition knob (where fitted)” in the “5. Starting  
and driving” section for instructions on accessing  
the Intelligent Key system Emergency key.  
The switch will illuminate when the doors are locked.  
SPA2531Z  
A chime will sound and the doors will not lock if the  
power door lock switch is pressed while any door  
other than the driver’s door is open.  
CAUTION  
To unlock and open the door, pull the inside door  
handle as illustrated.  
The alarm system will be triggered when the door  
is opened using the key (NISSAN alarm equipped  
models). To stop the alarm, turn the ignition key  
NOTE  
With Super Lock (where fitted)  
Models without the Super Lock system: If a door  
is manually opened from inside after having  
pressed the integrated keyfob “LOCK” button, the  
door will unlock, but the power door lock switch  
will remain illuminated.  
The door cannot be opened when the Super Lock  
system is activated.  
to the ON position or press the unlock  
on the integrated keyfob.  
button  
POWER DOOR LOCK SWITCH  
Initialising the system after vehicle  
battery loading or replacement  
Locking the doors when leaving the  
vehicle  
After recharging or replacing the battery, you should  
release (initialise) the system by:  
It is possible to lock all doors using the power door  
lock switch when leaving the vehicle:  
Inserting the key into the ignition switch and then  
turning it to the ON position.  
•
1. Open the driver’s door, remove the key from the  
ignition or the Intelligent Key (where fitted) from  
the passenger compartment.  
Unlocking the vehicle using the integrated key-  
fob.  
•
2. Press the “LOCK” side of the power door lock  
NPA952  
switch j1 .  
–
All doors except the driver’s door lock  
Press to lock  
j1  
3-10 Pre-driving checks and adjustments  
Downloaded from manuals search engine  
3. Close the driver’s door.  
is pressed the drive away door locking system will  
not lock the doors again until a door is opened and  
closed.  
CHILD SAFETY LOCK — REAR  
DOORS  
–
–
–
The driver’s door locks  
The power door lock switch illuminates  
To activate or deactivate drive-away door  
locking:  
Super Lock system models: The Super Lock  
system is not activated  
1. Unlock the doors.  
2. Turn the ignition switch ON.  
3. Activation  
–
Intelligent Key models: If the Intelligent Key has  
been left inside the vehicle, all doors will unlock  
and an alarm will sound  
Press and hold the “LOCK” side of the power  
door lock switch j1 for 5 seconds.  
Super Lock equipped models (RHD  
models)  
NPA859Z  
Deactivation  
If the doors are locked using the integrated keyfob  
“LOCK” button or an outside door lock switch (In-  
telligent Key models), the Super Lock system will be  
activated. The power door lock switch will illuminate  
to indicate that all doors are locked, but it will not be  
possible to use the power door lock switch to un-  
lock the doors.  
Press and hold the “UNLOCK” side of the power  
door lock switch j1 for 5 seconds.  
The child safety lock helps prevent doors from be-  
ing opened accidentally, especially when small chil-  
dren are in the vehicle.  
4. A buzzer will sound if activation or deactivation  
was successful.  
When the switch is in the LOCK position, the rear  
door can only be opened from the outside.  
Once activated, drive-away door locking will func-  
tion on every subsequent trip.  
Locking the doors with the power door lock switch  
will not activate the Super Lock system.  
Drive away door locking  
When active, the drive away door locking function  
will automatically lock all doors when the vehicle  
speed exceeds 12 km/h (7 MPH).  
All doors will be automatically unlocked when a front  
door is opened except in anti-hijack mode (only the  
driver’s door or front passenger door will unlock); or  
when opening a rear passenger door from the in-  
side.  
When “UNLOCK”, on the power door lock switch,  
Pre-driving checks and adjustments 3-11  
Downloaded from manuals search engine  
outside, when the vehicle is not locked, by operat-  
ing the microswitch j1 located on the back door  
underside.  
BACK DOOR LOCK  
Vehicle dead battery – Back door lock  
release lever (where fitted)  
NOTE  
The back door cannot be opened from the out-  
side when the power door lock switch is acti-  
vated. An audible warning is heard when the  
microswitch j1 located on the back door under-  
side is operated.  
To open the back door, unlock it with one of the fol-  
lowing operations, then push the back door mi-  
croswitch j1 and pull up to open it.  
NPA914Z  
NPA990  
WARNING  
Push the back door outside lock switch j2  
(where fitted). See “Intelligent Key system  
(where fitted)” earlier in this section.  
•
The vehicle’s back door can be unlocked from the  
inside when the battery is dead. Tilt the seatback  
down. Remove the cover from the lock and slide the  
release lever j1 as illustrated. See “Rear seat(s)” in  
the “1. Safety — seats, seat belts and supplemental  
restraint system” section for more information re-  
garding the seat operation.  
Always check that the back door has been  
properly closed to prevent it from opening  
while driving.  
•
•
•
Push the “UNLOCK” button on the Intelligent  
Key (where fitted). See “Intelligent Key system  
(where fitted)” earlier in this section.  
•
Do not drive with the back door opened. This  
could allow dangerous exhaust gases to be  
drawn into the vehicle.  
Push the “UNLOCK” button on the integrated  
keyfob (where fitted). See “Integrated keyfob/re-  
mote control system” earlier in this section.  
•
Closely supervise children when they are  
around the vehicle to prevent them from play-  
ing and being locked in the luggage compart-  
ment where they could be seriously injured.  
Keep the vehicle locked, with the back door  
closed, when not in use, and prevent chil-  
dren’s access to the vehicle’s keys.  
Unlock all the doors using the key.  
•
•
Push the power door lock switch to the “UN-  
LOCK” position.  
To close the back door, pull down and then push  
closed until securely locked.  
The power door lock system allows you to lock or  
unlock all doors including the back door.  
The back door can be manually released from the  
3-12 Pre-driving checks and adjustments  
Downloaded from manuals search engine  
SECURITY SYSTEM  
The ignition circuit is turned on without the own-  
er’s key being used.  
•
ALARM SYSTEM (where fitted)  
NISSAN ANTI-THEFT SYSTEM (NATS)  
The alarm system provides visual and audible alarm  
signals if parts of the vehicle are disturbed.  
The NISSAN Anti-Theft System (NATS)* will not  
allow the engine to start without the use of the reg-  
istered NATS key.  
The alarm system will stop when:  
The vehicle is unlocked using the keyfob unlock  
button.  
•
How to arm the alarm system  
* Immobilizer  
1. Close all doors, windows, back door and bon-  
net.  
The ignition switch or ignition knob is turned to  
the ON position with a registered NATS key.  
•
If the engine fails to start using the registered NATS  
key, it may be due to interference from another  
NATS key, an automated toll road device or an auto-  
mated payment device on the key ring. Restart the  
engine using the following procedure:  
2. Lock the vehicle using the keyfob (lock button),  
for additional information, see “Integrated key-  
fob/remote control system” in the “3. Pre-driving  
checks and adjustments” section.  
If the system does not operate as described  
above, have it checked by your NISSAN dealer or  
qualified workshop.  
1. Leave the ignition switch in the ON position for  
approximately 5 seconds.  
Ultrasonic sensors (where fitted)  
NOTE  
The ultrasonic sensors (volumetric sensing) detect  
movements in the passenger’s compartment. When  
the alarm system is set to the armed position, it will  
automatically switch on the ultrasonic sensors.  
If the vehicle is not fully locked, a door/bonnet/  
back door is open, or the ignition switch is in the  
ON position (after arming the system), the buzzer  
will sound. After correctly closing, the buzzer will  
stop.  
2. Turn the ignition switch to the “OFF” or LOCK  
position and wait approximately 5 seconds.  
3. Repeat steps 1 and 2.  
It is possible to exclude the ultrasonic sensors (e.g.  
when leaving pets inside the car).  
4. Restart the engine while holding the device  
(which may have caused the interference) sepa-  
rated from the registered NATS key or NATS  
Intelligent Key (where fitted).  
Alarm system operation  
To exclude the ultrasonic sensors:  
The system will give the following alarm:  
1. Turn the ignition switch 3 times within 7 seconds  
from the “OFF” to the ON position.  
The siren sounds intermittently and all direction  
indicators will flash.  
•
If this procedure allows the engine to start,  
NISSAN recommends placing the registered  
NATS key or NATS Intelligent Key (where fitted)  
on a separate key-ring to avoid interference from  
other devices.  
2. Close the door(s)/bonnet/back door and press  
The alarm automatically turns off after 28 sec-  
onds.  
•
the lock button  
back door.  
on the keyfob to lock all doors/  
The alarm is activated when:  
The ultrasonic sensors are now excluded from the  
alarm system. All other functions of the system re-  
main activated until the alarm system is disarmed  
again.  
The volumetric sensing system (ultrasonic sen-  
sors) is triggered.  
•
Any door/the back door is opened.  
•
•
The bonnet is opened.  
Pre-driving checks and adjustments 3-13  
Downloaded from manuals search engine  
BONNET RELEASE  
The NATS security indicator light (Type jB ) is  
located on the Driver’s side of the dashboard  
and blinks whenever the ignition switch is in the  
LOCK, “OFF” or Acc position.  
•
If the NISSAN Anti-Theft System (NATS) is mal-  
functioning, this light will remain on while the ignition  
switch is in the ON position.  
If the light remains on and/or the engine will not  
start, see your NISSAN dealer for NATS service  
as soon as possible. Please bring all NATS keys  
or NATS Intelligent Keys when visiting your  
NISSAN dealer for service.  
SIC2045Z  
Meters and gauges (Type A)  
Additional information for RHD models  
If the NATS is malfunctioning, this light will turn on  
after flashing six times while the ignition switch is in  
the ON position.  
However, if the NATS security warning light turns  
off after the light has remained on for 15 minutes,  
there is a 10 second time slot to start the engine  
after the ignition is turned off. See your NISSAN  
dealer for NATS service as soon as possible.  
NIC1402Z  
Driver’s side (Type B)  
NATS security warning/indicator light  
(where fitted)  
One of the following functions (depending on the  
vehicle specifications) indicates that the vehicle is  
equipped with NATS:  
The NATS security warning light (Type A) is lo-  
•
cated in the meter panel and blinks whenever  
the ignition switch is in the LOCK, “OFF” or Acc  
position.  
NPA1002  
3-14 Pre-driving checks and adjustments  
Downloaded from manuals search engine  
FUEL FILLER LID  
LHD models  
RHD models  
jA  
jB  
FUEL FILLER LID OPENER LEVER  
FUEL FILLER CAP  
1. Pull the bonnet lock release lever j1 , located  
below the instrument panel on the driver’s side;  
the bonnet will spring up slightly.  
2. Slide the lever j2 , at the front of the bonnet, with  
your fingertips and raise the bonnet.  
3. Insert the support rod j3 into the slot on the  
underside of the bonnet.  
NPA1004  
NPA832Z  
4. When closing the bonnet, replace the support  
rod in its original position, then slowly close the  
bonnet and make sure it locks into place.  
LHD models  
RHD models  
The fuel filler cap is a ratcheting type. Tighten the  
cap clockwise until ratcheting clicks are heard.  
jA  
jB  
Put the fuel filler cap on the cap holder as illustrated  
while refuelling.  
WARNING  
To open the fuel filler lid, pull up the opener lever,  
located below the instrument panel on the driver’s  
side. To lock, close the fuel filler lid securely.  
Always check whether the bonnet is closed and  
locked securely to prevent it from opening while  
driving. The vehicle should only be operated with  
the bonnet securely closed.  
WARNING  
Fuel is extremely flammable and highly explo-  
•
sive under certain conditions. Always stop the  
engine and do not smoke or allow open flames  
or sparks near the vehicle when refuelling.  
Fuel may be under pressure. Turn the cap half  
•
a turn and wait for any hissing sound to stop,  
in order to prevent fuel from spraying out and  
causing possible personal injury.  
Use only a NISSAN fuel filler cap or exact  
equivalent as a replacement. It has a built-in  
safety valve needed for proper operation of  
•
Pre-driving checks and adjustments 3-15  
Downloaded from manuals search engine  
HANDBRAKE LEVER  
STEERING WHEEL  
the fuel system and emission control system.  
An incorrect cap can result in a serious mal-  
function and possible injury.  
CAUTION  
If fuel is spilled on the vehicle body, flush it away  
with water to avoid paint damage.  
NPA834Z  
NPA840Z  
To apply: Pull the lever up j1 .  
WARNING  
To release: Pull the lever up slightly, push the but-  
ton j2 and lower completely.  
Do not adjust the steering wheel while driving.  
You could lose control of your vehicle and cause  
an accident.  
Before driving, check that the brake warning light  
goes out. For additional information, see “Warn-  
ing/indicator lights and audible reminders” in the  
“2. Instruments and controls” section.  
Release the lock lever as illustrated and adjust the  
steering wheel to the desired position (up or down,  
forwards or backwards). Firmly push the lock lever  
back into position to lock the steering wheel in place.  
NOTE  
A buzzer will sound if the vehicle is driven with-  
out releasing the handbrake. See “Audible  
reminders” in the “2. Instruments and controls”  
section.  
3-16 Pre-driving checks and adjustments  
Downloaded from manuals search engine  
SUN VISORS  
MIRRORS  
INSIDE REAR-VIEW MIRROR  
AUTOMATIC ANTI-DAZZLING INSIDE  
MIRROR (where fitted)  
NPA839Z  
NPA862Z  
NPA829Z  
CAUTION  
Night position  
Day position  
j1  
j2  
jA  
Do not store the sun visor before returning it to  
its original position.  
The inside mirror is designed so that it automatically  
adjusts the reflection according to the intensity of  
the following vehicle’s headlights.  
1. To block out glare from the front, move the main  
sun visor downwards.  
Front of the vehicle  
The night position j1 will reduce glare from the  
CAUTION  
2. To block glare from the side, remove the main  
sun visor from the centre mount and move it to  
the side.  
headlights of vehicles behind you at night.  
Do not hang any object on the mirror or spray  
glass cleaner directly on the mirror. Doing so will  
reduce the sensitivity of the sensor, resulting in  
improper operation.  
WARNING  
Only use the night position j1 when necessary,  
as it reduces rear-view clarity.  
OUTSIDE REAR-VIEW MIRRORS  
WARNING  
Check the position of all mirrors before driv-  
•
ing. Altering their position while driving could  
distract your attention from the driving opera-  
tion.  
Objects viewed in the outside mirrors are  
closer than they appear.  
•
Pre-driving checks and adjustments 3-17  
Downloaded from manuals search engine  
NOTE  
If the mirror becomes displaced from its adjusted  
position, use the following procedure to return it  
to the correct geared position:  
1. Fold (or CLOSE j1 ) the mirror electronically us-  
ing the remote control switch.  
2. Wait until the mirror emits a strong noise, this  
confirms that the mirror has correctly engaged.  
NPA863Z  
MPA0008Z  
3. Fold out (or OPEN j2 ) the mirror electronically  
using the remote control switch.  
Adjusting — Remote control  
Folding — Manual control  
4. Adjust the mirror to the correct driving angle us-  
ing the remote control j3 .  
LHD models  
Fold the outside rear-view mirror by pushing it to-  
wards the rear of the vehicle.  
jA  
jB  
RHD models  
The outside rear-view mirror control will only oper-  
ate when the ignition switch is in the Acc or ON  
position.  
Turn the control to the right j1 or to the left j2 to  
select the right or left outside rear-view mirror, then  
adjust the mirror to the desired position by tilting the  
control as illustrated j3 .  
NPA864Z  
Folding — Remote control (where fitted)  
Fold the outside rear-view mirror by pushing the  
CLOSE side j1 of the switch.  
To return the mirror to its original position, push the  
OPEN side j2 of the switch.  
3-18 Pre-driving checks and adjustments  
Downloaded from manuals search engine  
VANITY MIRROR  
NPA842Z  
Left hand drive  
NPA910Z  
Right hand drive  
To use the front vanity mirror, pull down the sun  
visor and lift up the cover.  
Pre-driving checks and adjustments 3-19  
Downloaded from manuals search engine  

Related Topics

Popular Owner Manuals