The driver’s door can be locked/unlocked from out-
side using the key/emergency key if the vehicle’s
battery is dead.
Press to unlock
j2
INSIDE DOOR HANDLE
WARNING
To lock the door, insert the key into the driver’s door
key cylinder and turn it towards the front of the ve-
hicle j1 .
When leaving the vehicle, do not leave the key
inside the vehicle.
The power door lock switch, located on the centre
console, can be used to lock j1 or unlock j2 all
doors simultaneously from inside the vehicle.
To unlock the door, turn the key towards the rear of
the vehicle j2 .
See “Ignition knob (where fitted)” in the “5. Starting
and driving” section for instructions on accessing
the Intelligent Key system Emergency key.
The switch will illuminate when the doors are locked.
SPA2531Z
A chime will sound and the doors will not lock if the
power door lock switch is pressed while any door
other than the driver’s door is open.
CAUTION
To unlock and open the door, pull the inside door
handle as illustrated.
The alarm system will be triggered when the door
is opened using the key (NISSAN alarm equipped
models). To stop the alarm, turn the ignition key
NOTE
With Super Lock (where fitted)
Models without the Super Lock system: If a door
is manually opened from inside after having
pressed the integrated keyfob “LOCK” button, the
door will unlock, but the power door lock switch
will remain illuminated.
The door cannot be opened when the Super Lock
system is activated.
to the ON position or press the unlock
on the integrated keyfob.
button
POWER DOOR LOCK SWITCH
Initialising the system after vehicle
battery loading or replacement
Locking the doors when leaving the
vehicle
After recharging or replacing the battery, you should
release (initialise) the system by:
It is possible to lock all doors using the power door
lock switch when leaving the vehicle:
Inserting the key into the ignition switch and then
turning it to the ON position.
•
1. Open the driver’s door, remove the key from the
ignition or the Intelligent Key (where fitted) from
the passenger compartment.
Unlocking the vehicle using the integrated key-
fob.
•
2. Press the “LOCK” side of the power door lock
NPA952
switch j1 .
–
All doors except the driver’s door lock
Press to lock
j1
3-10 Pre-driving checks and adjustments
Downloaded from manuals search engine