NOTE
If the mirror becomes displaced from its adjusted
position, use the following procedure to return it
to the correct geared position:
1. Fold (or CLOSE j1 ) the mirror electronically us-
ing the remote control switch.
2. Wait until the mirror emits a strong noise, this
confirms that the mirror has correctly engaged.
NPA863Z
MPA0008Z
3. Fold out (or OPEN j2 ) the mirror electronically
using the remote control switch.
Adjusting — Remote control
Folding — Manual control
4. Adjust the mirror to the correct driving angle us-
ing the remote control j3 .
LHD models
Fold the outside rear-view mirror by pushing it to-
wards the rear of the vehicle.
jA
jB
RHD models
The outside rear-view mirror control will only oper-
ate when the ignition switch is in the Acc or ON
position.
Turn the control to the right j1 or to the left j2 to
select the right or left outside rear-view mirror, then
adjust the mirror to the desired position by tilting the
control as illustrated j3 .
NPA864Z
Folding — Remote control (where fitted)
Fold the outside rear-view mirror by pushing the
CLOSE side j1 of the switch.
To return the mirror to its original position, push the
OPEN side j2 of the switch.
3-18 Pre-driving checks and adjustments
Downloaded from manuals search engine