2006-2014 Nissan Qashqai SUV Pre-driving checks and adjustments -> Locking/unlocking with the key (vehicle dead battery) User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Pre-driving checks and adjustments -> Locking/unlocking with the key (vehicle dead battery) for Your Nissan Qashqai SUV First Generation (2006-2014)

DOOR LOCKS  
SUPER LOCK SYSTEM (RHD models)  
Emergency situations  
Locking without activating the Super  
Lock system  
If the Super Lock system is activated while you are  
inside the vehicle, for example by a traffic accident  
or other unexpected circumstances, follow the in-  
structions below.  
WARNING  
WARNING  
Super Lock system equipped models:  
Do not leave the key inside the vehicle when leav-  
ing the vehicle.  
Failure to follow the precautions below may lead  
to hazardous situations. Make sure the Super  
Lock system activation is always conducted  
safely.  
To release the Super Lock system:  
–
Insert the key into the ignition switch and turn it  
to the ON position.  
Locking the doors using the door key cylinder or  
power door lock switch will not activate the Super  
Lock system. See “Power door lock switch” later in  
this section for further information.  
When the vehicle is occupied, never lock the  
•
All doors can now be unlocked and opened from  
inside the vehicle.  
doors with the integrated keyfob. Doing so  
will trap the occupants, since the Super Lock  
system prevents the doors from being opened  
from the inside of the vehicle.  
LOCKING/UNLOCKING WITH THE  
KEY (vehicle dead battery)  
–
Remove the key from the ignition switch and un-  
lock the doors using the integrated keyfob “UN-  
LOCK” button  
.
Only operate the integrated keyfob “LOCK”  
•
All doors can now be opened from inside the  
vehicle.  
button when there is a clear view of the ve-  
hicle. This is to prevent anybody from being  
trapped inside the vehicle through the Super  
Lock system activation.  
To unlock and open the driver’s door from  
inside the vehicle while the Super Lock system  
is active:  
Pressing the “LOCK” button  
on the integrated  
1. Open or break the driver’s door window.  
keyfob or locking the doors using one of the outside  
door lock switches (Intelligent Key models) will acti-  
vate the Super Lock system.  
2. Insert the key into the outside door key cylinder  
and turn it towards the rear of the vehicle.  
NPA828Z  
When the Super Lock system is active, none of the  
doors can be opened from inside the vehicle. This  
provides additional security in case of theft or break-  
in.  
3. The driver’s door will unlock and can now be  
opened from inside the vehicle.  
WARNING  
When leaving the vehicle, do not leave the key  
inside the vehicle.  
•
The Super Lock system will be released when all  
the doors are unlocked using the integrated keyfob  
or an outside door lock switch (Intelligent Key mod-  
els).  
Never leave children unattended in a vehicle  
•
and always be sure you have your keys with  
you when leaving. If an emergency occurs it  
may be more difficult to help them otherwise.  
Pre-driving checks and adjustments 3-9  
Downloaded from manuals search engine  
The driver’s door can be locked/unlocked from out-  
side using the key/emergency key if the vehicle’s  
battery is dead.  
Press to unlock  
j2  
INSIDE DOOR HANDLE  
WARNING  
To lock the door, insert the key into the driver’s door  
key cylinder and turn it towards the front of the ve-  
hicle j1 .  
When leaving the vehicle, do not leave the key  
inside the vehicle.  
The power door lock switch, located on the centre  
console, can be used to lock j1 or unlock j2 all  
doors simultaneously from inside the vehicle.  
To unlock the door, turn the key towards the rear of  
the vehicle j2 .  
See “Ignition knob (where fitted)” in the “5. Starting  
and driving” section for instructions on accessing  
the Intelligent Key system Emergency key.  
The switch will illuminate when the doors are locked.  
SPA2531Z  
A chime will sound and the doors will not lock if the  
power door lock switch is pressed while any door  
other than the driver’s door is open.  
CAUTION  
To unlock and open the door, pull the inside door  
handle as illustrated.  
The alarm system will be triggered when the door  
is opened using the key (NISSAN alarm equipped  
models). To stop the alarm, turn the ignition key  
NOTE  
With Super Lock (where fitted)  
Models without the Super Lock system: If a door  
is manually opened from inside after having  
pressed the integrated keyfob “LOCK” button, the  
door will unlock, but the power door lock switch  
will remain illuminated.  
The door cannot be opened when the Super Lock  
system is activated.  
to the ON position or press the unlock  
on the integrated keyfob.  
button  
POWER DOOR LOCK SWITCH  
Initialising the system after vehicle  
battery loading or replacement  
Locking the doors when leaving the  
vehicle  
After recharging or replacing the battery, you should  
release (initialise) the system by:  
It is possible to lock all doors using the power door  
lock switch when leaving the vehicle:  
Inserting the key into the ignition switch and then  
turning it to the ON position.  
•
1. Open the driver’s door, remove the key from the  
ignition or the Intelligent Key (where fitted) from  
the passenger compartment.  
Unlocking the vehicle using the integrated key-  
fob.  
•
2. Press the “LOCK” side of the power door lock  
NPA952  
switch j1 .  
–
All doors except the driver’s door lock  
Press to lock  
j1  
3-10 Pre-driving checks and adjustments  
Downloaded from manuals search engine  

Related Topics

Popular Owner Manuals