2006-2014 Nissan Qashqai SUV Pre-driving checks and adjustments -> Using the remote keyless entry system User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Pre-driving checks and adjustments -> Using the remote keyless entry system for Your Nissan Qashqai SUV First Generation (2006-2014)

door outside lock switch until the direction indi-  
cators flash to confirm the setting mode. Then  
release the driver’s door outside lock switch.  
Setting convenience mode:  
LOCKING THE DOORS  
–
The message [All door unlock] appears on  
the vehicle information display (inside the ve-  
hicle).  
CAUTION  
Before operating the keyfob remote control:  
Remove the ignition key or Intelligent Key  
from the vehicle and close all windows.  
•
See “Warning/indicator lights and audible  
reminders” in the “2. Instruments and controls” sec-  
tion and “Vehicle information display” in the “2. In-  
struments and controls” section for further details.  
Check that the driver’s door is securely  
closed.  
•
Push the “LOCK” button  
fob.  
on the integrated key-  
USING THE REMOTE KEYLESS  
ENTRY SYSTEM  
–
–
All the doors lock.  
The direction indicators flash once.  
is pushed with all the doors  
NPA1041  
WARNING  
Super Lock system equipped models:  
If the “LOCK” button  
5. Setting anti-hijack mode:  
Failure to follow the precautions below may lead  
to hazardous situations. Make sure the Super  
Lock system activation is always conducted  
safely.  
locked, the direction indicators will flash once to  
remind you that the doors are already locked.  
–
The message [Single door unlock] appears  
on the vehicle information display (inside the  
vehicle).  
UNLOCKING THE DOORS  
Convenience mode  
When the vehicle is occupied, never lock the  
•
doors with the integrated keyfob. Doing so  
will trap the occupants, since the Super Lock  
system prevents the doors from being opened  
from the inside of the vehicle.  
Push the “UNLOCK” button  
keyfob.  
on the integrated  
–
The message [All door unlock] appears in the  
vehicle information display.  
Only operate the integrated keyfob “LOCK”  
•
–
–
All doors unlock.  
button when there is a clear view of the ve-  
hicle. This is to prevent anybody from being  
trapped inside the vehicle through the Super  
Lock system activation.  
The direction indicators flash twice.  
NPA1040  
Anti-hijack mode  
1. Push the “UNLOCK” button  
keyfob.  
on the integrated  
For further details on the Super Lock system see  
“Super Lock system (RHD models)” later in this  
section.  
Pre-driving checks and adjustments 3-5  
Downloaded from manuals search engine  

Related Topics

Popular Owner Manuals