2006-2014 Nissan Qashqai SUV Pre-driving checks and adjustments -> Back door lock User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Pre-driving checks and adjustments -> Back door lock for Your Nissan Qashqai SUV First Generation (2006-2014)

outside, when the vehicle is not locked, by operat-  
ing the microswitch j1 located on the back door  
underside.  
BACK DOOR LOCK  
Vehicle dead battery – Back door lock  
release lever (where fitted)  
NOTE  
The back door cannot be opened from the out-  
side when the power door lock switch is acti-  
vated. An audible warning is heard when the  
microswitch j1 located on the back door under-  
side is operated.  
To open the back door, unlock it with one of the fol-  
lowing operations, then push the back door mi-  
croswitch j1 and pull up to open it.  
NPA914Z  
NPA990  
WARNING  
Push the back door outside lock switch j2  
(where fitted). See “Intelligent Key system  
(where fitted)” earlier in this section.  
•
The vehicle’s back door can be unlocked from the  
inside when the battery is dead. Tilt the seatback  
down. Remove the cover from the lock and slide the  
release lever j1 as illustrated. See “Rear seat(s)” in  
the “1. Safety — seats, seat belts and supplemental  
restraint system” section for more information re-  
garding the seat operation.  
Always check that the back door has been  
properly closed to prevent it from opening  
while driving.  
•
•
•
Push the “UNLOCK” button on the Intelligent  
Key (where fitted). See “Intelligent Key system  
(where fitted)” earlier in this section.  
•
Do not drive with the back door opened. This  
could allow dangerous exhaust gases to be  
drawn into the vehicle.  
Push the “UNLOCK” button on the integrated  
keyfob (where fitted). See “Integrated keyfob/re-  
mote control system” earlier in this section.  
•
Closely supervise children when they are  
around the vehicle to prevent them from play-  
ing and being locked in the luggage compart-  
ment where they could be seriously injured.  
Keep the vehicle locked, with the back door  
closed, when not in use, and prevent chil-  
dren’s access to the vehicle’s keys.  
Unlock all the doors using the key.  
•
•
Push the power door lock switch to the “UN-  
LOCK” position.  
To close the back door, pull down and then push  
closed until securely locked.  
The power door lock system allows you to lock or  
unlock all doors including the back door.  
The back door can be manually released from the  
3-12 Pre-driving checks and adjustments  
Downloaded from manuals search engine  

Related Topics

Popular Owner Manuals