The operating range is within 80 cm (31.50 in) from
each request switch j1 .
LOCKING/UNLOCKING
If the Intelligent Key is too close to the door glass,
door handle or rear bumper, the request switches
may not function.
When the Intelligent Key is within the operating
range, it is possible for anyone, even someone who
does not carry the Intelligent Key, to push the re-
quest switch to lock/unlock the doors including the
back door.
NPA1020
NPA1021
USING INTELLIGENT KEY SYSTEM
Do not push the door handle request switch with
the Intelligent Key held in your hand as illustrated.
The close distance to the door handle will cause
the Intelligent Key system to have difficulty rec-
ognising that the Intelligent Key is outside the
vehicle.
•
•
After locking the doors using the door handle
request switch, make sure that the doors have
been securely locked by operating the door
handles.
NPA1019
NPA1022
To prevent the Intelligent Key from being left in-
side the vehicle, make sure you carry the key
with you and then lock the doors.
•
•
The request switch will not function under the fol-
lowing conditions:
The Intelligent Key system allows you to lock and
unlock the driver’s door, passenger doors, or back
door without activating the integrated keyfob or us-
ing the emergency key (driver’s door key cylinder).
Do not pull the door handle before pushing the
door handle request switch. The door will be
unlocked but will not open. Release the door
handle once and pull it again to open the door.
When the Intelligent Key is left inside the vehicle
•
•
When the Intelligent Key is not within the opera-
tional range
When near the vehicle, the Intelligent Key sends an
ID code that allows the owner to manually lock/un-
lock the vehicle by pressing the driver’s door, front
passenger’s door or back door outside lock switch.
When any door is open or not closed securely
•
•
When the Intelligent Key battery is discharged
Pre-driving checks and adjustments 3-7
Downloaded from manuals search engine