FUEL FILLER LID
LHD models
RHD models
jA
jB
FUEL FILLER LID OPENER LEVER
FUEL FILLER CAP
1. Pull the bonnet lock release lever j1 , located
below the instrument panel on the driver’s side;
the bonnet will spring up slightly.
2. Slide the lever j2 , at the front of the bonnet, with
your fingertips and raise the bonnet.
3. Insert the support rod j3 into the slot on the
underside of the bonnet.
NPA1004
NPA832Z
4. When closing the bonnet, replace the support
rod in its original position, then slowly close the
bonnet and make sure it locks into place.
LHD models
RHD models
The fuel filler cap is a ratcheting type. Tighten the
cap clockwise until ratcheting clicks are heard.
jA
jB
Put the fuel filler cap on the cap holder as illustrated
while refuelling.
WARNING
To open the fuel filler lid, pull up the opener lever,
located below the instrument panel on the driver’s
side. To lock, close the fuel filler lid securely.
Always check whether the bonnet is closed and
locked securely to prevent it from opening while
driving. The vehicle should only be operated with
the bonnet securely closed.
WARNING
Fuel is extremely flammable and highly explo-
•
sive under certain conditions. Always stop the
engine and do not smoke or allow open flames
or sparks near the vehicle when refuelling.
Fuel may be under pressure. Turn the cap half
•
a turn and wait for any hissing sound to stop,
in order to prevent fuel from spraying out and
causing possible personal injury.
Use only a NISSAN fuel filler cap or exact
equivalent as a replacement. It has a built-in
safety valve needed for proper operation of
•
Pre-driving checks and adjustments 3-15
Downloaded from manuals search engine