2006-2014 Nissan Qashqai SUV Pre-driving checks and adjustments -> Switching from Convenience mode to Anti-hijack mode User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Pre-driving checks and adjustments -> Switching from Convenience mode to Anti-hijack mode for Your Nissan Qashqai SUV First Generation (2006-2014)

use of additional remote controllers, contact a  
NISSAN dealer or qualified workshop.  
Always remove the ignition key or Intelligent  
Key, close all windows before operating the  
keyfob door lock system.  
•
•
SWITCHING FROM CONVENIENCE  
MODE TO ANTI-HIJACK MODE  
The integrated keyfob will not function under the fol-  
lowing conditions:  
Selective unlock or “Anti-hijack” mode allows the  
remote unlocking of only the driver’s door to prevent  
an attacker from entering the vehicle via an unlocked  
passenger door.  
Ensure that the driver’s door is securely  
closed before operating the integrated keyfob  
door lock system for correct operation of the  
system.  
When the distance between the integrated key-  
fob and vehicle is more than approximately 5 m  
(15 ft).  
•
As default, the unlock mode will be set to “Conve-  
nience” mode (all doors will unlock). Follow the in-  
structions below to switch between convenience  
mode and anti-hijack mode.  
Do not allow the integrated keyfob, which  
contains electrical components, to come into  
contact with water or salt water. This could  
affect the system function.  
•
When the integrated keyfob battery is  
discharged.  
•
When the key is in the ignition switch.  
•
jA Key with integrated keyfob (from  
outside the vehicle)  
All doors can be locked or unlocked from the out-  
Do not drop the integrated keyfob.  
•
•
side by pressing the “LOCK”  
button on the integrated keyfob.  
or “UNLOCK”  
Do not strike the integrated keyfob sharply  
against another object.  
1. Turn the ignition switch to the “OFF” position.  
For Super Lock system models only (RHD mod-  
els):  
2. Press and hold both the “LOCK”  
LOCK” buttons for 5 seconds.  
and “UN-  
Do not place the integrated keyfob for an ex-  
tended period in an area where temperatures  
exceed 60°C (140°F).  
•
When the vehicle is occupied, never lock the  
doors with the integrated keyfob. Doing so will  
trap the occupants, since the Super Lock system  
prevents the doors from being opened from the  
inside.  
Setting anti-hijack mode:  
The direction indicators flash once.  
Setting convenience mode:  
The direction indicators flash three times.  
–
If a integrated keyfob is lost or stolen, NISSAN rec-  
ommends erasing the ID code of that integrated  
keyfob from the vehicle. This may prevent the unau-  
thorised use of the integrated keyfob to unlock the  
vehicle. For information regarding the erasing pro-  
cedure, contact a NISSAN dealer or qualified work-  
shop.  
–
jB Intelligent Key  
WARNING  
1. Turn the ignition switch from ON to LOCK and  
exit the vehicle.  
Only operate the integrated keyfob lock button in  
full and clear view of the vehicle to prevent any-  
body being trapped inside the vehicle.  
For information regarding the replacement of a bat-  
tery, see “Battery” in the “8. Maintenance and  
do-it-yourself” section.  
2. From outside the vehicle, lock the vehicle using  
the integrated keyfob “LOCK” button  
.
CAUTION  
3. Press and hold both the “LOCK”  
and “UN-  
When locking the doors using the integrated  
keyfob, be sure not to leave the key in the  
vehicle.  
•
LOCK”  
buttons for 10 seconds.  
4. Within 3 seconds, press and hold the driver’s  
3-4 Pre-driving checks and adjustments  
Downloaded from manuals search engine  
door outside lock switch until the direction indi-  
cators flash to confirm the setting mode. Then  
release the driver’s door outside lock switch.  
Setting convenience mode:  
LOCKING THE DOORS  
–
The message [All door unlock] appears on  
the vehicle information display (inside the ve-  
hicle).  
CAUTION  
Before operating the keyfob remote control:  
Remove the ignition key or Intelligent Key  
from the vehicle and close all windows.  
•
See “Warning/indicator lights and audible  
reminders” in the “2. Instruments and controls” sec-  
tion and “Vehicle information display” in the “2. In-  
struments and controls” section for further details.  
Check that the driver’s door is securely  
closed.  
•
Push the “LOCK” button  
fob.  
on the integrated key-  
USING THE REMOTE KEYLESS  
ENTRY SYSTEM  
–
–
All the doors lock.  
The direction indicators flash once.  
is pushed with all the doors  
NPA1041  
WARNING  
Super Lock system equipped models:  
If the “LOCK” button  
5. Setting anti-hijack mode:  
Failure to follow the precautions below may lead  
to hazardous situations. Make sure the Super  
Lock system activation is always conducted  
safely.  
locked, the direction indicators will flash once to  
remind you that the doors are already locked.  
–
The message [Single door unlock] appears  
on the vehicle information display (inside the  
vehicle).  
UNLOCKING THE DOORS  
Convenience mode  
When the vehicle is occupied, never lock the  
•
doors with the integrated keyfob. Doing so  
will trap the occupants, since the Super Lock  
system prevents the doors from being opened  
from the inside of the vehicle.  
Push the “UNLOCK” button  
keyfob.  
on the integrated  
–
The message [All door unlock] appears in the  
vehicle information display.  
Only operate the integrated keyfob “LOCK”  
•
–
–
All doors unlock.  
button when there is a clear view of the ve-  
hicle. This is to prevent anybody from being  
trapped inside the vehicle through the Super  
Lock system activation.  
The direction indicators flash twice.  
NPA1040  
Anti-hijack mode  
1. Push the “UNLOCK” button  
keyfob.  
on the integrated  
For further details on the Super Lock system see  
“Super Lock system (RHD models)” later in this  
section.  
Pre-driving checks and adjustments 3-5  
Downloaded from manuals search engine  

Related Topics

Popular Owner Manuals