2006-2014 Nissan Qashqai SUV Pre-driving checks and adjustments -> Unlocking the doors User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Pre-driving checks and adjustments -> Unlocking the doors for Your Nissan Qashqai SUV First Generation (2006-2014)

door outside lock switch until the direction indi-  
cators flash to confirm the setting mode. Then  
release the driver’s door outside lock switch.  
Setting convenience mode:  
LOCKING THE DOORS  
–
The message [All door unlock] appears on  
the vehicle information display (inside the ve-  
hicle).  
CAUTION  
Before operating the keyfob remote control:  
Remove the ignition key or Intelligent Key  
from the vehicle and close all windows.  
•
See “Warning/indicator lights and audible  
reminders” in the “2. Instruments and controls” sec-  
tion and “Vehicle information display” in the “2. In-  
struments and controls” section for further details.  
Check that the driver’s door is securely  
closed.  
•
Push the “LOCK” button  
fob.  
on the integrated key-  
USING THE REMOTE KEYLESS  
ENTRY SYSTEM  
–
–
All the doors lock.  
The direction indicators flash once.  
is pushed with all the doors  
NPA1041  
WARNING  
Super Lock system equipped models:  
If the “LOCK” button  
5. Setting anti-hijack mode:  
Failure to follow the precautions below may lead  
to hazardous situations. Make sure the Super  
Lock system activation is always conducted  
safely.  
locked, the direction indicators will flash once to  
remind you that the doors are already locked.  
–
The message [Single door unlock] appears  
on the vehicle information display (inside the  
vehicle).  
UNLOCKING THE DOORS  
Convenience mode  
When the vehicle is occupied, never lock the  
•
doors with the integrated keyfob. Doing so  
will trap the occupants, since the Super Lock  
system prevents the doors from being opened  
from the inside of the vehicle.  
Push the “UNLOCK” button  
keyfob.  
on the integrated  
–
The message [All door unlock] appears in the  
vehicle information display.  
Only operate the integrated keyfob “LOCK”  
•
–
–
All doors unlock.  
button when there is a clear view of the ve-  
hicle. This is to prevent anybody from being  
trapped inside the vehicle through the Super  
Lock system activation.  
The direction indicators flash twice.  
NPA1040  
Anti-hijack mode  
1. Push the “UNLOCK” button  
keyfob.  
on the integrated  
For further details on the Super Lock system see  
“Super Lock system (RHD models)” later in this  
section.  
Pre-driving checks and adjustments 3-5  
Downloaded from manuals search engine  
INTELLIGENT KEY SYSTEM  
(where fitted)  
–
The message [Single door unlock] appears in  
the vehicle information display.  
–
–
Only the driver’s door unlocks.  
The direction indicators flash twice, quickly.  
2. Push the “UNLOCK” button  
keyfob again.  
on the integrated  
–
–
All doors unlock.  
The direction indicators flash twice.  
NPA1042  
NPA1018  
Auto-relock:  
NOTE  
The Intelligent Key system is a convenient keyless  
entry system that allows you to operate your vehicle  
without using an actual key.  
An auto-relock function will operate 2 minutes after  
a full or partial unlock, if no further user action is  
taken. The auto-relock will be cancelled if any door  
is opened or the key is inserted into the ignition.  
See Intelligent Key detection warning, Intelligent  
Key low battery warning or Intelligent Key system  
fault warning in “Vehicle information display” ear-  
lier in this section for more information.  
WARNING  
KEYFOB OPERATION FAILURE  
Radio waves could adversely affect electric medi-  
cal equipment. Those who use a pacemaker  
should contact the electric medical equipment  
manufacturer for the possible influences before  
use.  
The keyfob may not work properly if:  
The keyfob battery is low. See “Integrated key-  
•
fob/Intelligent Key battery replacement” in the  
“8. Maintenance and do-it-yourself” section for  
keyfob battery replacement instructions and the  
required battery type.  
INTELLIGENT KEY OPERATING  
RANGE  
The locking/unlocking system has been used  
•
The Intelligent Key functions can only be used when  
the Intelligent Key is within the specified operating  
range from the request switch j1 .  
continuously. An anti lock-abuse system pre-  
vents the lock motors from overheating and dis-  
ables the keyfob locking operation for a short  
period of time if the system is used continuously.  
When the Intelligent Key battery is discharged or  
strong radio waves are present near the operating  
location, the Intelligent Key system’s operating  
range becomes narrower, and the Intelligent Key  
may not function properly.  
The door handle is being pulled while the  
keyfob is being operated.  
•
The vehicle’s battery is dead.  
•
3-6 Pre-driving checks and adjustments  
Downloaded from manuals search engine  

Related Topics

Popular Owner Manuals