2004-2012 Skoda Octavia 4 Door Using the system User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Using the system for Your Skoda Octavia 4 Door Second Generation (2004-2012)

7
Using the system  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
8
Cockpit  
Fig. 1 Certain items of equipment shown in the illustration are only fitted to particular model versions or are optional items of equipment.  
Cockpit  
9
Cockpit  
16  
A Front passenger airbag* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
175  
Overview  
17  
258  
58  
A Fuse box (on side of dash panel) . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
This overview will help you to quickly familiarise yourself with the  
displays and the control elements.  
18  
A Light switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
19  
A Control dial for the instrument lighting and control dial for the head-  
light beam range regulation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
63, 63  
224  
100  
11  
1
A Electric power-operated window* . . . . . . . . . . . . . . . . . . . . . . . . . . .  
52  
73  
20  
A Bonnet release lever . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
A Storage compartment on the driver's side . . . . . . . . . . . . . . . . . . . .  
A Lever for adjusting the steering wheel . . . . . . . . . . . . . . . . . . . . . . .  
A Ignition lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
2
A Electric exterior mirror adjustment* . . . . . . . . . . . . . . . . . . . . . . . . .  
21  
3
108  
A Air outlet vents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
22  
4
A Lever for the multi-functional switch:  
23  
123  
−
−
Turn signal light, headlight and parking light, headlight flasher  
64  
24  
A Depending on equipment fitted:  
Cruise control system* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
129  
−
−
−
Operating controls for the heating . . . . . . . . . . . . . . . . . . . . . . . .  
Operating controls for Climatic* . . . . . . . . . . . . . . . . . . . . . . . . . .  
Operating controls for Climatronic* . . . . . . . . . . . . . . . . . . . . . . .  
109  
111  
115  
5
A Steering wheel:  
−
−
−
with horn  
with driver airbag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
175  
25  
A Depending on equipment fitted:  
with pushbuttons for radio, navigation system and mobile  
phone* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
−
−
Switch for the ESP* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
193  
195  
128  
139  
17  
Switch for TCS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
6
A Instrument cluster: Instruments and indicator lights . . . . . . . . . . .  
26  
A Front and rear parking aid* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
A Depending on equipment fitted:  
7
A Lever for the multi-functional switch:  
27  
−
−
Multi-functional indicator* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
21  
69  
−
−
Gearshift lever (manual gearbox) . . . . . . . . . . . . . . . . . . . . . . . . .  
125  
134  
199  
Windshield wiper and wash system . . . . . . . . . . . . . . . . . . . . . . .  
Selector lever (automatic gearbox*) . . . . . . . . . . . . . . . . . . . . . . .  
8
83  
A Control dial for heating on the driver's seat* . . . . . . . . . . . . . . . . . .  
28  
A Tyre inflation pressure-control system* . . . . . . . . . . . . . . . . . . . . . .  
A Depending on equipment fitted:  
9
A Air outlet vents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
108  
64  
29  
10  
A Switch for hazard warning lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
−
−
Front ashtray - high centre console* . . . . . . . . . . . . . . . . . . . . . .  
96  
101  
182  
11  
A Storage compartment on the dash panel* . . . . . . . . . . . . . . . . . . . .  
101  
Storage compartment* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
12  
A Depending on equipment fitted:  
30  
A Indicator light for a switched off front seat passenger airbag* . .  
−
−
Radio*  
Navigation*  
13  
A Control dial for heating on the front passenger seat* . . . . . . . . . .  
83  
99  
Note  
14  
A Storage compartment on the front passenger side . . . . . . . . . . . .  
•
Equipment which is marked * is only standard on certain vehicle model  
versions or only suppliable as optional equipment for certain models.  
15  
A Switch for the front passenger airbag* (in front passenger storage  
compartment) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
182  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
10 Cockpit  
•
Cars with factory-fitted radio or navigation system are supplied with separate  
instructions for operating such equipment.  
•
The arrangement of the controls and switches and the location of some items  
on right-hand drive models may differ from that shown in ⇒ page 8, fig. 1. The  
symbols on the controls and switches are the same as for left-hand drive models.  
The brief instruction 11  
The brief instruction  
Setting steering wheel position  
Basic functions and important information  
Introduction  
The chapter of the brief instruction is only used as a quick reference  
of the most important operating elements of the vehicle. It is neces-  
sary to observe all the information which is contained in the  
following chapters of the Owner's Manual.  
Fig. 3 Adjustable steering  
wheel: Lever next to the  
steering column  
Unlocking and locking the vehicle  
Fig. 4 The correct distance of  
the driver from the steering  
wheel  
Fig. 2 Remote control key  
1
A Unlocking the vehicle  
2
You can set the height and the forward/back position of the steering  
wheel to the desired position.  
A Unlocking the boot lid  
3
A Locking the vehicle  
–
–
Pull the lever below the steering column ⇒ fig. 3 down.  
4
A Folding out/folding up of the key  
Further information ⇒ page 50, “Unlocking and locking car”.  
Set the steering wheel to the desired position (concerning height and  
forward/back position).  
–
Push the lever upwards as far as the stop.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
12 The brief instruction  
Further information ⇒ page 122, “Setting steering wheel position”.  
WARNING  
Adjust the height of the belt in such a way that the shoulder part of the belt  
is positioned approximately across the middle of your shoulder - on no  
account across your neck!  
WARNING  
•
Adjust the steering wheel so that the distance between the steering  
wheel and your chest is at least 25 cm ⇒ page 11, fig. 4. Not maintaining this  
minimum distance will mean that the airbag system will not be able to prop-  
erly protect you - hazard!  
Adjusting the front seats  
•
•
You must not adjust the steering wheel when the vehicle is moving!  
For safety reasons the lever must always be firmly pushed up to avoid the  
steering wheel altering its position unintentionally when driving - risk of  
accident!  
Seat belt height adjuster  
Fig. 6 Controls at seat  
1
A Adjusting a seat in a forward/back direction  
2
A Adjusting height of seat*  
3
A Adjust the angle of the seat backrest  
Fig. 5 Front seat: Seat belt  
height adjuster  
4
A Adjusting lumbar support*  
Further information ⇒ page 75, “Adjusting the front seats”.  
–
–
Move the height adjuster in the desired direction up or down ⇒ fig. 5.  
WARNING  
Then pull firmly on the belt to ensure that the seat belt height adjuster  
has correctly locked in place.  
Only adjust the driver seat when the vehicle is stationary - risk of injury!  
Further information ⇒ page 171, “Seat belt height adjuster”.  
The brief instruction 13  
Electric exterior mirror adjustment*  
Switching lights on and off  
Fig. 7 Inner part of door:  
Rotary knob  
Fig. 8 Dash panel: Light  
switch  
Heating of the external mirror  
Automatic light control*  
  
Adjusting left and right exterior mirrors simultaneously  
Adjusting the right-hand exterior mirror  
Switching off operating control  
Switching off all lights/daylight driving lights*  
Switching on side lights  
Switching on the low beam and main beam  
Folding in both exterior mirrors*  
Further information ⇒ page 58, “Switching lights on and off ”.  
Further information ⇒ page 73, “Exterior mirror”.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
14 The brief instruction  
A
A Intermittent switch, sensitivity setting rain sensor*  
Turn signal and main beam lever  
0
A Wipers off  
1
A Intermittent wipe  
2
A Slow wipe  
3
A Fast wipe  
4
A one time wipe  
5
A Automatic wipe/wash  
Rear window wiper*  
Fig. 9 Turn signal and main  
beam lever  
6
A Intermittent wipe - every 6 seconds  
7
A Automatic wipe/wash  
Further information ⇒ page 69, “Windshield wiper”.  
A
A Turn signal light right  
B
A Turn signal light left  
Power windows*  
C
A Switching over between low beam and main beam lights  
D
A Headlight flasher  
Further information ⇒ page 64, “The turn signal   and main beam lever ”.  
Windscreen wiper lever  
Fig. 11 Buttons on the  
driver's door  
A
A Button for the power window in the driver's door  
B
A Button for the power window in the front passenger's door  
Fig. 10 Windscreen wiper  
lever  
C
A Button for the power window at the rear right door  
D
A Button for the power window at the rear left door  
The brief instruction 15  
S
A Safety switch  
–
Unscrew the fuel filler cap anti-clockwise and place the fuel filler cap  
from above on the fuel filler flap ⇒ fig. 13.  
Further information ⇒ page 52, “Power windows*”.  
Further information ⇒ page 222, “Refuelling”.  
Refuelling  
Bonnet remote release  
Fig. 12 Right rear side of the  
vehicle: Open fuel filler flap  
Fig. 14 Bonnet release lever  
–
Pull the unlocking lever below the dash panel on the driver's side  
⇒ fig. 14.  
Opening the bonnet  
Fig. 13 Fuel filler flap with  
cap unscrewed  
–
–
In order to open the fuel filler flap, press it on the left side in the middle  
⇒ fig. 12.  
The fuel filler cap on the fuel filler tube must be unlocked to the left  
using the vehicle key (only valid for vehicles which do not have auto-  
matic unlocking of the fuel filler flap).  
Fig. 15 Radiator grille: Lever  
of the locking button  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
16 The brief instruction  
C
A Engine oil must be refilled.  
Further information ⇒ page 227, “Check engine oil level”.  
Fig. 16 Securing the bonnet  
with the bonnet support  
–
–
Pulling on the locking lever ⇒ page 15, fig. 15 will unlock the bonnet  
fully.  
Take the bonnet support out of its holder and set it in the opening  
designed for it ⇒ fig. 16.  
Further information ⇒ page 224, “Opening and closing the bonnet.”.  
Inspecting the engine oil level  
Fig. 17 Dipstick  
A
A Engine oil must not be refilled.  
B
A Engine oil can be refilled.  
Instruments and Indicator/Warning Lights 17  
Instruments and Indicator/Warning Lights  
General view of the instrument cluster  
Fig. 18 Instrument cluster  
1
A Engine revolutions counter ⇒ page 18  
−
Service interval - Display of the remaining number of days, kilometres or  
miles to the next Inspection Service / Reset*  
1)  
2
A Speedometer ⇒ page 18  
−
−
−
Reset trip counter for distance driven  
Resetting Service Interval Display  
Activate / deactivate display mode  
3
A Coolant temperature gauge ⇒ page 18  
4
A Display  
−
−
−
−
−
with counter for distance driven ⇒ page 19  
with Service Interval Display ⇒ page 20  
with digital clock ⇒ page 21  
6
A Fuel gauge ⇒ page 18  
with Multi-functional indicator* ⇒ page 21  
with Information display* ⇒ page 26  
5
A Button for the selection of the mode (turn button) / the setting (press button):  
−
−
Set hours / minutes  
1)  
Valid for countries where the values are indicated in British measuring units.  
Activating / deactivating the second speed in mph or km/h*  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
18 Instruments and Indicator/Warning Lights  
Cold range  
Engine revolutions counter  
If the pointer is in the left-hand area of the scale it means that the engine has not  
yet reached its operating temperature. Avoid running at high engine speeds, at full  
throttle and at severe engine loads.  
1
The red zone of the rev counter scale A ⇒ page 17, fig. 18 indicates the range in  
which the engine control unit begins to limit the engine speed. The engine control  
unit restricts the engine speed to the steady limit value.  
The operating range  
Shift into the next higher gear or select the selector lever position D of the auto-  
matic gearbox before reaching the red zone of the rev counter scale.  
The engine has reached its operating temperature as soon as the pointer moves  
into the mid-range of the scale. The pointer may also move further to the right at  
high engine loads and high outside temperatures. This is not critical provided the  
warning symbol in the instrument cluster does not flash.  
Avoid high engine speeds during the driving time and before the engine has been  
warmed up to operating temperature ⇒ page 201.  
If the symbol in the instrument cluster flashes it means that either the coolant  
temperature is too high or the coolant level is too low. Observe the guidelines  
⇒ page 36, “Coolant temperature/ Coolant quantity ”.  
For the sake of the environment  
Shifting up early helps you save fuel and reduce the operating noise of your  
vehicle.  
WARNING  
Pay attention to the warning notes ⇒ page 225, “Working in the engine  
compartment” before opening the bonnet and inspecting the coolant level.  
Speedometer  
Warning against excessive speeds*  
Caution  
An acoustic warning signal will sound when the vehicle speed exceeds 120 kilome-  
tres per hour. The acoustic warning signal will switch off again when the vehicle  
speed goes below this speed limit.  
Additional headlights and other attached components in front of the fresh air inlet  
impair the cooling efficiency of the coolant. There is then a risk of the engine over-  
heating at high outside temperatures and high engine loads!  
Note  
This function is only valid for some countries.  
Fuel gauge  
6
The fuel gauge A ⇒ page 17, fig. 18 only operates when the ignition is switched  
on.  
Coolant temperature gauge  
2)  
The fuel tank has a capacity of about 55°litres or 60 litres . The warning symbol   
3
The coolant temperature gauge A⇒ page 17, fig. 18 operates only when the igni-  
tion is switched on.  
in the instrument cluster lights up when the pointer reaches the reserve marking.  
There are now about 9 litres of fuel remaining in the tank. This symbol is a reminder  
for you, that you must refuel.  
In order to avoid any damage to the engine, please pay attention to the following  
notes regarding the temperature ranges:  
2)  
Valid for Octavia Combi 4x4 and Octavia Scout.  
Instruments and Indicator/Warning Lights 19  
The following will be displayed in the information display*:  
Please refuel!  
Reset button  
5
If you hold the reset button A ⇒ page 17, fig. 18 pressed for about 1 second, the  
trip counter is set back to zero.  
An audible signal sounds as an additional warning signal.  
Trip counter for distance driven  
The trip counter indicates the distance which you have driven ⇒ fig. 19 since this  
counter was last reset - in steps of 100 metres or 1/10 of a mile.  
Caution  
Never run the fuel tank completely empty! The irregular supply of the fuel system  
can lead to irregular running of the engine. Unburnt fuel may get into the exhaust  
system and damage the catalytic converter.  
Counter for distance driven  
The counter for distance driven ⇒ fig. 19 indicates the total distance in kilometers  
or miles which the vehicle has driven.  
Note  
Fault display  
After filling up, it can occur that during dynamic driving (e.g. numerous curves,  
braking, driving downhill and climbing a steep hill) the fuel gauge indicates approx.  
a fraction less. When stopping or during less dynamic driving, the correct fuel  
supply quantity is indicated. This effect is not a fault.  
If there is a fault in the instrument cluster, a constant text will appear in the display  
Error. Have the fault rectified as soon as possible by a specialist workshop.  
WARNING  
Never seek to adjust the trip counter for distance driven while driving for  
safety reasons!  
Counter for distance driven  
Note  
If vehicles which are fitted with the information display* the display of the second  
speed is activated in mph or km/h, this driving speed is indicated instead of the  
counter for the total distance driven.  
Fig. 19 Display: Counter for  
distance driven  
The distance which you have driven with your vehicle is shown in kilometres (km).  
In some countries the measuring unit “mile” is used.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
20 Instruments and Indicator/Warning Lights  
The specialist garage:  
Service Interval Display  
•
•
•
resets the memory of the display after the appropriate inspection,  
makes an entry in the Service schedule,  
affix the sticker with the entry of the following service interval to the side of the  
dash panel on the driver's side.  
5
Reset the service interval displays by using the button A ⇒ page 17, fig. 18.  
On vehicles which are equipped with information display*, you can call up this  
information in the following menu on ⇒ page 26:  
„
„
„
SETTINGS  
Fig. 20 Service Interval  
Display: Note  
Service Interval (Service)  
Reset  
Depending on the equipment installed in the vehicle, the text can differ on the  
display.  
Caution  
We recommend that you do not reset the Service Interval Display yourself other-  
wise this can result in the service interval display being incorrectly set, which may  
also result in problems with operation of your vehicle.  
Service Interval Display  
Before the next service interval a key symbol and the remaining kilometers are  
indicated after switching on the ignition ⇒ fig. 20. At the same time, a display  
appears regarding the remaining days until the next service interval.  
Note  
The following will be displayed in the information display*:  
•
Never reset the display between service intervals otherwise this may result in  
incorrect readouts.  
information is retained in the Service Interval Display also after the battery of  
the vehicle is disconnected.  
If the instrument cluster is exchanged after a repair, the correct values must be  
Service in ... km or... days  
•
The kilometre indicator or the days indicator reduces in steps of 100 km. or days  
until the service due date is reached.  
•
A flashing key symbol and the text Service appears in the display for 20 seconds  
as soon as the due date for the service is reached.  
entered in the counter for the Service Interval Display. This work is carried out by a  
specialist garage.  
The following will be displayed in the information display*:  
•
The data displayed is the same after resetting the display with flexible service  
Service now!  
intervals (QG1) using the reset button as that for a vehicle with fixed service inter-  
vals (QG2). We therefore recommend having the Service Interval Display reset only  
by an authorised Škoda Service Partner who is familiar with the procedure for reset-  
ting the display with a vehicle system tester.  
Resetting Service Interval Display  
It is only possible to reset the Service Interval Display, if a service message or at least  
a pre-warning is shown on the display of the instrument cluster.  
•
Please refer to the brochure Service schedule for extensive information about  
the service intervals.  
We recommend having this resetting performed by a specialist garage.  
Instruments and Indicator/Warning Lights 21  
On vehicles which are fitted out with information display*, it is possible to switch  
off the display of some information.  
Digital clock  
5
You can set the time with the rotary knob A ⇒ page 17, fig. 18.  
Note  
5
Select the information which you wish to change by turning the button A and  
carry out the change of the selected information by pressing the button.  
•
In certain national versions the displays appear in the Imperial system of meas-  
ures.  
On vehicles which are fitted out with the information display*, it is possible to set  
•
If the display of the second speed is activated in mph, the current speed* is not  
indicated in km/h on the display.  
the time in the menu Time ⇒ page 29.  
WARNING  
Memory  
The clock should not be adjusted while driving for safety reasons but only  
when the vehicle is stationary!  
Multi-functional indicator (onboard computer)*  
Introduction  
The multi-functional indicator appears in the display ⇒ fig. 21 or in the information  
display ⇒ page 26 depending on the equipment fitted to your vehicle.  
Fig. 21 Multi-functional  
indicator  
The multi-functional indicator offers you a range of useful information.  
The outside temperature  
Driving time  
⇒ page 23  
⇒ page 24  
⇒ page 24  
⇒ page 24  
⇒ page 24  
⇒ page 24  
⇒ page 25  
⇒ page 25  
⇒ page 25  
The multi-functional indicator is equipped with two automatic memories. The  
selected memory is displayed in the middle of the display field ⇒ fig. 21.  
Current fuel consumption  
Average fuel consumption  
Range  
The data of the single-trip memory (memory 1) is shown if a 1 appears in the  
display. A 2 shown in the display means that data relates to the total distance  
memory (memory 2).  
B
Switching over the memory with the help of the button A⇒ page 22, fig. 22 on the  
Distance driven  
D
windscreen wiper lever or with the help of the button A on the multifunction  
Average speed  
steering wheel* ⇒ page 23.  
Current speed*  
Warning against excessive speeds*  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
22 Instruments and Indicator/Warning Lights  
Single-trip memory (memory 1)  
A
B
The rocker switch A and the button A are located in the grip of the  
window wiper lever ⇒ fig. 22.  
The single-trip memory collates the driving information from the moment the igni-  
tion is switched on until it is switched off. New data will also flow into the calcula-  
tion of the current driving information if the trip is continued within 2 hours after  
switching off the ignition. The memory will be is automatically erased, on the other  
hand, if the trip is interrupted for more than 2 hours.  
Selecting the memory  
B
–
Short-term pressing of the button A allows to select the desired  
memory.  
Total-trip memory (memory 2)  
Selecting the functions  
Press the top or bottom rocker switch Afor longer than 0.5 seconds.  
The total distance driven memory gathers data from any number of individual jour-  
neys up to a total of 99 hours and 59 minutes driving or 9.999 kilometres driven.  
The memory is deleted when either of these limits is reached and the calculation  
starts from anew.  
A
–
In this way, call up in sequence the individual functions of the multi-  
functional indicator.  
The total-trip memory will not, contrary to the single-trip memory, be deleted after  
a period of interruption of driving of 2 hours.  
Setting function to zero  
–
–
Select the memory you want.  
Note  
B
Press button A for more than 1 second.  
All information in the memory 1 and 2 is erased if the battery of the vehicle is  
B
The following readouts of the selected memory will be set to zero by button A:  
disconnected.  
•
•
•
•
average fuel consumption,  
distance driven,  
Operating with the buttons on the windshield wiper lever  
average speed,  
Driving time.  
You can only operate the multi-functional indicator when the ignition is switched  
on. After the ignition is switched on, the function displayed is the one which you last  
selected before switching off the ignition.  
A
B
On vehicles fitted with the multifunction steering wheel*, the buttons A and A  
have been replaced with the rotary control on the multifunction steering wheel  
⇒ page 23, fig. 23.  
Fig. 22 Multi-functional  
indicator: Control elements  
Instruments and Indicator/Warning Lights 23  
The following readouts of the selected memory will be set to zero with the button  
D
A:  
Operating with the buttons on the multifunction steering wheel*  
•
•
•
•
average fuel consumption,  
distance driven,  
average speed,  
Driving time.  
You can only operate the multi-functional indicator when the ignition is switched  
on. After the ignition is switched on, the function displayed is the one which you last  
selected before switching off the ignition.  
Fig. 23 Multi-functional  
indicator: Operating with the  
buttons on the multifunction  
steering wheel  
Outside temperature  
D
Switching over and resetting is performed with the handwheel A  
⇒ fig. 23.  
Selecting the memory  
D
–
Short-term pressing of the button A allows to select the desired  
memory.  
Selecting the functions  
Fig. 24 The outside tempera-  
ture  
C
–
–
–
By pressing the button A, you can call up the menu of the multi-func-  
tional indicator.  
D
Turn the handwheel Aupwards or downwards. In this way, call up in  
sequence the individual functions of the multi-functional indicator.  
The outside temperature appears in the display when the ignition is switched on.  
If the outside temperature drops below +4 °C, a snow flake symbol (warning signal  
for ice on the road) appears before the temperature indicator ⇒ fig. 24 and a  
D
Short-term pressing of the button A allows to select the highlighted  
A
warning signal sounds. After pressing the rocker switch Aat the windshield wiper  
function.  
C
lever ⇒ page 22, fig. 22 or the button A at the multifunction steering wheel  
⇒ fig. 23, the function shown last is indicated.  
Setting function to zero  
–
–
Select the memory you want.  
D
Press the button A for more than 1 second.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
24 Instruments and Indicator/Warning Lights  
WARNING  
B
D
A on the windshield wiper lever ⇒ page 22, fig. 22 or with the handwheel A on  
the multifunction steering wheel* ⇒ page 23, fig. 23. A zero appears in the display  
for the first 100 m you drive after erasing the memory.  
Do not only rely upon the information given on the outside temperature  
display that there is no ice on the road. Please note that black ice may also be  
present on the road surface even at temperatures around +4°C - warning,  
drive with care!  
The indicated value will be updated every 5 seconds while you are driving.  
Note  
The amount of fuel consumed will not be indicated.  
Driving time  
Range  
The driving time which has elapsed since the memory was last erased, appears in  
the display. If you wish to measure the driving time as of a particular time, you must  
The estimated range in kilometres is shown on the display. It indicates the distance  
you can still drive with your vehicle based on the present level of fuel in the tank for  
the same style of driving.  
B
set the memory to zero at this moment in time by pressing the button A on the  
D
windshield wiper lever ⇒ page 22, fig. 22 or the handwheel A on the multifunc-  
tion steering wheel* ⇒ page 23, fig. 23 for longer than 1 second.  
The readout is shown in steps of 10 km. After lighting up of the indicator light for the  
fuel reserve the display is shown in steps of 5 km.  
The maximum distance indicated in both memories is 99 hours and 59 minutes.  
The indicator is set back to null if this period is exceeded.  
The fuel consumption for the last 50 km is taken as a basis for calculating the range.  
If you drive in a more economical manner from this moment on, the range will be  
increased accordingly.  
Current consumption  
If the memory is set to zero (after disconnecting the battery), the fuel consumption  
of 10 ltr./100 km is calculated for the range; afterwards the value is adapted accord-  
ingly to the style of driving.  
The current fuel consumption level is shown in the display in litres/100 km. This  
information can help you to adapt your style of driving to the fuel consumption you  
wish to achieve.  
The display appears in litres/hour if the vehicle is stationary or driving at a low  
speed.  
Distance driven  
The indicated value will be updated every 0.5 seconds while you are driving.  
The distance driven since the memory was last erased appears in the display  
⇒ page 21. If you wish to measure the distance driven of a particular time, you  
Average fuel consumption  
B
must set the memory to zero at this moment in time by pressing the button A on  
D
the windshield wiper lever ⇒ page 22, fig. 22 or the handwheel A on the multi-  
The average fuel consumption since the memory was last erased is shown in the  
display in litres/100 km ⇒ page 21. This information can help you to adapt your  
style of driving to the fuel consumption you wish to achieve.  
function steering wheel* ⇒ page 23, fig. 23.  
The maximum distance indicated in both switch positions is 9 999 km. The indicator  
is set back to null if this period is exceeded.  
If you wish to determine the average fuel consumption over a certain period of time  
you must set the memory to zero at the start of the measurement using the button  
Instruments and Indicator/Warning Lights 25  
Average speed  
The average speed since the memory was last erased is shown in the display in  
km/hour ⇒ page 21. If you wish to determine the average vehicle speed over a  
certain period of time you must set the memory to zero at the start of the measure-  
B
ment using the button A on the windshield wiper lever ⇒ page 22, fig. 22 or with  
D
the handwheel A on the multifunction steering wheel* ⇒ page 23, fig. 23.  
A zero appears in the display for the first 100 m you drive after erasing the memory.  
The indicated value will be updated every 5 seconds while you are driving.  
Fig. 26 Multi-functional  
indicator: Control elements  
Current speed*  
Warning against excessive speeds  
This function enables you to set a speed limit, e.g. if you drive in town. A text in the  
display is intended to draw your attention to the fact that you have exceeded the set  
speed limit.  
The current speed which is identical to the display of the speedometer, is indicated  
2
on the display A ⇒ page 17, fig. 18.  
•
•
•
Select the menu point Speed warning --- km/h (warning at --- km/h)..  
Warning against excessive speeds*  
Drive e.°g at a speed of 50 km/h.  
B
Press the button A on the windshield wiper lever ⇒ fig. 26 or the handwheel  
D
A on the multifunction steering wheel* ⇒ page 23, fig. 23. Speed warning  
50 km/h (warning at 50 km/h) is displayed in the information display* ⇒ fig. 25.  
A
The desired speed can also be set in steps of 5°km/h by pressing the button A on  
D
the windshield wiper lever ⇒ fig. 26 or by turning the handwheel A on the multi-  
function steering wheel* ⇒ page 23, fig. 23. The set speed is confirmed by pressing  
B
D
the button Aon the windshield wiper lever ⇒ fig. 26 or the handwheel Aon the  
multifunction steering wheel* ⇒ page 23, fig. 23.  
If you now exceed the set speed limit, Speed 50°km/h exceeded will be shown on  
the display. This message is indicated for as long as the speed is reduced below the  
Fig. 25 Warning against  
excessive speeds  
B
set limit or switch off the message by pressing the button A on the windshield  
D
wiper lever ⇒ fig. 26 or the handwheel A on the multifunction steering wheel*  
⇒ page 23, fig. 23.  
An audible signal sounds as an additional warning signal.  
The set speed limit remains stored even after switching off the ignition.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
26 Instruments and Indicator/Warning Lights  
Information display*  
Main menu  
⇒ page 26  
⇒ page 27  
Door, luggage compartment door and bonnet ajar  
warning  
Introduction  
Service Interval Display  
⇒ page 20  
Selector lever position for an automatic gearbox  
⇒ page 132  
Main menu  
Fig. 27 Instrument cluster:  
Information display  
The information display provides you with information in a convenient way  
concerning the current operating state of your vehicle. The information system  
also provides you with data (depending on the equipment installed in the vehicle)  
relating to the radio, mobile phone, multi-functional indicator, navigation system,  
the unit connected to the MDI input and the automatic gearbox.  
Fig. 28 Information display:  
Controls on the windshield  
wiper lever  
Certain functions and operating conditions are always being checked on the  
vehicle when the ignition is switched on and also while driving.  
Functional faults, if required repair work and other information are indicated by red  
symbols ⇒ page 28 and yellow symbols ⇒ page 29.  
Lighting up of certain symbols is combined with an acoustic warning signal.  
Information and texts giving warnings are also shown in the display ⇒ page 31.  
The display of text is possible in the following languages:  
Fig. 29 Information display:  
Controls on the multifunc-  
tion steering wheel  
Czech, English, German, French, Italian, Spanish, Portuguese, Russian and  
Chinese.  
You can select the desired language in the setting menu.  
The following information can be shown in the display (depending on the equip-  
ment installed on the vehicle):  
Instruments and Indicator/Warning Lights 27  
The menu point Navigation is only then displayed when the factory-fitted Naviga-  
tion system* is switched on.  
Operating with the buttons on the windshield wiper lever  
A
–
You can activate the MAIN MENU by pressing the rocker switch A  
⇒ page 26, fig. 28 for more than 1 second.  
The menu point Aux. Heating is only then displayed, if the vehicle is fitted with the  
factory-fitted auxiliary heating*.  
A
–
You can select the menu through the rocker switch A. When the  
The menu point Assistant is only then displayed, if the vehicle is fitted with  
cornering lights*.  
B
pushbutton Ais briefly pressed, the information you have selected is  
displayed.  
Operating with the buttons on the multifunction steering wheel  
Note  
•
If warning messages are shown on the information display ⇒ page 27  
C
–
You can activate the MAIN MENU by pressing the rocker switch A  
B
⇒ page 28, these messages can be confirmed with the button A on the wind-  
⇒ page 26, fig. 29 for more than 1 second.  
D
shield wiper lever or with the button A on the multifunction steering wheel in  
order to call up the main menu.  
D
–
You can select the individual menus by pressing the handwheel A.  
D
After briefly pressing the handwheel A, the desired menu is indi-  
•
If you do not activate the information display at that moment, the menu shifts  
to one level higher every 10 seconds.  
The operation of the factory-fitted radio* or the navigation system* is described  
cated.  
•
C
–
After briefly pressing the button Ayou can achieve a higher level, by  
pressing the button A for longer than 1 second, you can call up the  
in separate operating instructions to be found in the on-board literature.  
C
MAIN MENU.  
Door, luggage compartment door and bonnet ajar warning  
You can select the following information (depending on the equipment installed on  
the vehicle):  
„
„
„
„
„
„
„
„
MFD (Onboard computer) ⇒ page 21  
Audio*  
Navigation*  
Phone* ⇒ page 142  
Aux. Heating (auxiliary heating)* ⇒ page 119  
Assistant* ⇒ page 60  
Vehicle status ⇒ page 28  
Setup ⇒ page 29  
Fig. 30 Information display:  
Door warning  
The menu point Audio is only then displayed when the factory-fitted Radio* is  
switched on.  
The door, luggage compartment and bonnet ajar warning lights up if at least one  
door, the luggage compartment or bonnet are not closed. The symbol indicates  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
28 Instruments and Indicator/Warning Lights  
which door is still open or whether the luggage compartment door or bonnet is not  
closed ⇒ fig. 30.  
Shown in the menu Vehicle status, if there is at least one error message. After  
selecting this menu the first of the error messages is displayed. Several error  
messages are shown on the display under the message e.°g. 1/3 ⇒ fig. 31. This  
indicates that the first of a total of three error messages is displayed. The respective  
messages are displayed one after the other in an interval of 5 seconds. Check as  
soon as possible the displayed error messages.  
The symbol goes out as soon as the doors, luggage compartment door and bonnet  
are completely closed.  
A warning signal sounds if the car is driven at a speed of more than 6km/hour and  
if the engine or the luggage compartment door is open.  
As long as the operational faults are not rectified, the symbols are always indicated  
again. After the first display, the symbols are indicated without information for the  
driver.  
Auto Check Control*  
If a fault occurs, a warning signal will also sound in addition to the symbol and text  
in the display:  
Car state  
•
•
Priority 1 - three warning signals  
Priority 2 - one warning signal  
Red symbols  
A red symbol signals danger.  
Fig. 31 Information display:  
Display of operational fault  
The Auto Check Control carries out a check of certain functions and vehicle compo-  
nents. The check is performed constantly when the ignition is switched on, both  
when the vehicle is stationary, as well as when driving.  
Fig. 32 Information display:  
Oil pressure is low  
Some operational faults, urgent repairs, service work or other information appear  
in the display of the instrument cluster. The displays are shown with a red or yellow  
light symbol depending on the priority of the message.  
–
–
–
–
Stop the vehicle.  
The red symbols indicate danger (priority 1) while the yellow symbols indicate a  
warning (priortity 2). Information for the driver may also appear in addition to the  
symbols ⇒ page 31.  
Switch the engine off.  
Investigate the function indicated.  
Obtain professional assistance.  
Instruments and Indicator/Warning Lights 29  
Meaning of the red symbols:  
Engine oil pressure too low  
Set-up  
⇒ page 35  
Three successive warning signals will sound if a red symbol appears.  
Yellow symbols  
Fig. 34 Setting the clock  
You can change certain settings by means of the information display. The current  
setting is shown on the information display in the respective menu at the top below  
the line ⇒ fig. 34.  
You can select the following information (depending on the equipment installed on  
the vehicle):  
Fig. 33 Information display:  
Brake pad worn  
•
•
•
•
•
•
•
•
•
•
•
•
•
MFD Data (MFA DATA)  
Convenience  
Check the relevant function as soon as possible.  
The meaning of the yellow symbols:  
Lights & Vision (Lights & Vision)  
Time  
Winter tyres  
Check engine oil level,  
engine oil sensor faulty  
⇒ page 40  
⇒ page 39  
Language  
Units  
Brake pad worn  
Assistant (Assistant)  
Alternative speed displayed (Second speed)  
Travel mode  
One warning signal will sound if a yellow symbol appears.  
If several operational faults of priority 2 exist, the symbols appear one after the  
other and are each illuminated for about 5 seconds.  
Service Interval (Service)  
Factory Setting  
Back  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
30 Instruments and Indicator/Warning Lights  
After selecting the menu point Back you will reach one level higher in the menu.  
Lights and Visibility  
Here you can set how long the light should stay on for the function Coming/Leaving  
Home and the intensity of the footwell lighting. Furthermore you can here switch  
on or off the function daylight driving lights and convenience turn signal.  
Displays of the MFA  
Here you can switch off or on certain displays of the multi-functional indicator.  
After selecting the menu point Factory setting the factory setting is established  
Comfort*  
again.  
You can set the following functions (depending on the equipment installed on the  
vehicle):  
Time  
Here you can set the time, the time format (12 or 24 hour indicator) and the time  
change summer/winter time.  
On vehicles with rain sensor you can switch on or off the  
function for automatic closing of the windows and the  
Rain closing  
sliding/tilting roof in case of rain and locked vehicle. If it  
is not raining and the function is set, the windows  
including the sliding/tilting roof are closed automatically  
after approx. 12 hours.  
Winter tyres  
Here you can set at which speed a warning signal should sound. This function is  
used for e.g winter tyres with the permissible maximum speed less than the  
maximum speed of the vehicle.  
Door open  
ATA confirm  
Window op.  
Mirror down  
Mirror adjust.  
Here you can switch on or off the functions for opening  
a single door and automatic closing.  
When exceeding the speed, the following is displayed on the information display*:  
Snow tyres max. speed ... km/h (Winter tyres maximum ... km/h)  
Here you can set if a signal tone should sound addition-  
ally when activating or deactivating the anti-theft alarm  
system .  
Language  
Here you can set in which language the warning and information texts should be  
displayed.  
Here you can set the convenience mode only for the  
driver window or for all the windows.  
Measures  
Here you can switch on or off the function for mirror  
lowering on the front passenger side when engaging the  
Here you can set the units for temperature, consumption and distance driven.  
a)  
reverse gear  
.
Assistant  
Here you can adjust the tones of the acoustic signals of the parking aid*.  
Here you can switch on or off the function for left and  
right exterior mirror adjustment simultaneously.  
Second speed  
After selecting this menu the convenience setting is  
reset to factory setting. The following is displayed in the  
information display:  
3)  
Here you can switch on the display of the second speed in mph or in km/h  
.
Factory setting  
Travel mode  
Factory setting for convenience is set  
Here you can activate / deactivate the mode “tourist light”. This mode makes it  
possible to drive in countries with opposing traffic system, driving on the left/right,  
a)  
This function is only available on vehicles with an electrically adjustable driver seat.  
3)  
Valid for countries where the values are indicated in British measuring units.  
Instruments and Indicator/Warning Lights 31  
without dazzling the oncoming vehicles. The headlight swivel function is deacti-  
Factory Setting  
vated when switching on this mode. Further information ⇒ page 61.  
After selecting the menu point Factory Setting the factory setting of the informa-  
tion display is established again.  
Service  
Here you can have the kilometers still to be driven and the days until the following  
service interval shown and the Service Interval Display reset.  
Warning lights  
Overview  
The warning lights indicate certain functions or faults.  
Fig. 35 Instrument cluster with warning lights  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
32 Instruments and Indicator/Warning Lights  
Traction control system (TCS)  
Electronic stability programme (ESP)*  
Selector lever lock*  
Tyre pressure*  
⇒ page 37  
⇒ page 37  
⇒ page 37  
⇒ page 38  
⇒ page 38  
⇒ page 38  
⇒ page 39  
⇒ page 39  
⇒ page 39  
⇒ page 39  
⇒ page 39  
⇒ page 39  
⇒ page 40  
⇒ page 40  
⇒ page 41  
Turn signal lights (to the left)  
⇒ page 33  
⇒ page 33  
⇒ page 33  
⇒ page 33  
⇒ page 33  
⇒ page 33  
⇒ page 33  
⇒ page 33  
⇒ page 34  
⇒ page 34  
⇒ page 35  
⇒ page 35  
⇒ page 35  
⇒ page 36  
⇒ page 36  
⇒ page 36  
Turn signal lights (to the right)  
Fog lights*  
Main beam light  
Antilock brake system (ABS)  
Bonnet  
Low beam light  
Rear fog light  
Seat belt warning light  
Brake pad wear*  
Speed regulating system*  
Failure of the light bulbs  
Boot lid  
Diesel particle filter* (diesel engine)  
Open door  
Airbag system  
Fluid level in windshield washer system*  
Brake system  
Control system for exhaust  
Electromechanical power steering  
  
Dynamo  
Engine oil pressure  
Engine oil level  
EPC fault light (petrol engine)  
  
Fuel reserve  
Glow plug system (diesel engine)  
Coolant temperature/coolant level  
Instruments and Indicator/Warning Lights 33  
Main beam  
WARNING  
The indicator light comes on when the main beam is selected or also when the  
headlight flasher is operated.  
•
If you do not pay attention to the warning lights coming on and the corre-  
sponding descriptions and warning notes, this may result in severe body  
injuries or major vehicle damage.  
Further information about the main beam ⇒ page 64.  
•
The engine compartment of your car is a hazardous area. There is a risk  
of injuries, scalding, accidents and fire when working in the engine  
compartment, e.g. inspecting and replenishing oil and other fluids. It is also  
essential to observe all warnings ⇒ page 225, “Working in the engine  
compartment”.  
Low beam   
The warning light comes on when low beam is selected ⇒ page 58.  
Note  
Rear fog light   
• The arrangement of the indicator lights depends on the model version. The  
symbols shown in the following functional description are to be found as indicator  
lights in the instrument cluster.  
The warning light comes on when the rear fog lights are operating ⇒ page 62.  
•
Operational faults are shown in the instrument cluster as red symbols (priority  
1 - danger) or yellow symbols (priority 2 - warning).  
Cruise control system*  
The warning light lights up, when operating the speed regulating system.  
Turn signal system   
Failure of the light bulbs   
Either the left or right indicator light flashes depending on the position of the  
turn signal lever.  
The warning light comes on if a light bulb is damaged:  
The indicator light flashes at twice its normal rate if a turn signal light fails. This does  
not apply when towing a trailer.  
•
•
up to 2 seconds after the ignition is switched on,  
when switching on the defective light bulb.  
Switching off the hazard warning light system is switched on will cause all of the  
turn signal lights as well as both indicator lights to flash.  
The following text e.g will be displayed in the information display*:  
Check front right dipped beam!  
Further information about the turn signal system ⇒ page 64.  
The rear side lights and the licence plate lighting require several light bulbs. The  
indicator light only lights up if all light bulbs of the licence plate lighting or the  
parking light (in one rear light unit) are defective. Check regularly the function of the  
light bulbs.  
Fog lights*   
The warning light comes on when the fog lights are operating ⇒ page 62.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
34 Instruments and Indicator/Warning Lights  
Diesel particle filter* (diesel engine)  
Note  
Further information about diesel particle filter ⇒ page 200.  
If the warning light comes on, this means that soot has accumulated in the  
diesel particle filter because of the frequent short distances.  
In order to clean the diesel particle filter, the vehicle should be driven at an even  
speed of at least 60 km/h at engine speeds of 1 800 - 2 500 rpm for at least 15  
minutes or until the warning light goes out with the 4th or 5th gear engaged (auto-  
matic gearbox: position S) when the traffic situation permits it. This increases the  
exhaust temperature and the soot deposited in the diesel particle filter is burnt.  
Airbag system   
Monitoring the airbag system  
The warning light comes on for a few seconds when the ignition is switched on.  
There is a fault in the system if the warning light does not go out or flashes while  
Always pay attention to the valid speed limits ⇒  
.
driving ⇒  
. This also applies if the warning light does not come on when the igni-  
The warning light goes out after the successful cleaning of the diesel particle  
filter.  
tion is switched on.  
The following text will be displayed in the information display*:  
If the filter is not properly cleaned, the warning light does not go out and the  
warning light begins to flash. In the information display* appears Diesel-  
particle Owner's manual. Afterwards the engine control unit shifts the engine into  
the emergency mode, which only has a reduced power output. After switching the  
ignition off and on again the warning light comes on.  
Airbag fault!  
The functionality of the airbag system is also monitored electronically, when one  
airbag has been switched off  
Front, side and head airbags or belt tensioner which have been switched off  
using the vehicle system tester:  
Have the vehicle inspected without delay by your specialist garage.  
•
The warning light lights up for 4 seconds after switching on the ignition and  
then flashes again for 12 seconds in intervals of 2 seconds.  
The following text will be displayed in the information display*:  
Airbag/belt tensioner deactivated!  
WARNING  
•
If you do not pay attention to the warning light coming on and the corre-  
sponding descriptions and warning notes, this may result in injuries or  
major vehicle damage.  
Front passenger airbags switched off using the switch for front passenger  
airbags* in storage compartment on the front passenger side:  
•
Always adjust your speed to suit weather, road, region and traffic condi-  
tions. The route indicated by the warning light must not tempt you to disre-  
gard the national regulations for road traffic.  
•
the warning light comes on for 4 seconds after the ignition has been  
switched on,  
•
switching off the airbag is indicated in the middle of the dash panel by the  
lighting up of the indicator light   (airbag switched off) ⇒ page 182.  
Caution  
As long as the warning light lights up, one must take into account an increased  
fuel consumption and in certain circumstances a power reduction of the engine.  
Instruments and Indicator/Warning Lights 35  
WARNING  
Note  
If the yellow warning light goes out after starting the engine again and a short  
drive, it is not necessary to visit a specialist garage.  
If the battery has been disconnected and reconnected, the yellow warning light  
•
Have the airbag system checked immediately by a specialist garage if a fault  
exists. Otherwise, there is a risk of the airbag not being activated in the event  
of an accident.  
•
comes on after switching on the ignition. The warning light must go out after  
driving a short distance.  
Control system for exhaust   
Engine oil pressure   
The warning light comes on after the ignition has been switched on.  
If the warning light does not go out after starting the engine or it lights up when  
driving, a fault exists in an exhaust relevant component. The engine management  
system selects an emergency programme which enables you to drive to the nearest  
specialist garage by adopting a gentle style of driving.  
4)  
The warning light comes on for a few seconds when the ignition is switched  
on.  
Stop the vehicle and switch the engine off if the warning light does not go off  
after the engine has started or flashes while driving. Check the oil level and top up  
with oil as necessary ⇒ page 228, “Replenishing engine oil”.  
Electromechanical power steering   
An audible signal sounds three times as an additional warning signal.  
Do not continue your journey if for some reason it is not possible under the  
conditions prevailing to top up with oil. Keep the engine switched off and obtain  
professional assistance from a specialist garage, otherwise it could lead to severe  
engine damage.  
The warning light comes on for a few seconds when the ignition is switched on.  
If the warning light after switching on the ignition or when driving lights up contin-  
uously, a fault exists in the electromechanical power steering.  
•
If the yellow warning light lights up , this indicates a partial failure of the  
power steering and the steering forces can be greater.  
If the red warning light lights up , this indicates a complete failure of the  
Do not drive any further if the warning light flashes even if the oil is at the correct  
level. Do not run the engine not at idling speed either. Contact the nearest specialist  
garage to obtain professional assistance.  
•
power steering and the steering assist has failed (significantly higher steering  
forces).  
The following text will be displayed in the information display*:  
Oil Pressure Engine off! Owner's manual  
Further information ⇒ page 198.  
WARNING  
WARNING  
•
If you must stop for technical reasons, then park the vehicle at a safe  
distance from the traffic and switch off the engine and switch on the hazard  
warning light system.  
Contact your specialist garage if the power steering is defective.  
4)  
The warning light on vehicles fitted with information display does not come on after  
switching the ignition on, but only if a fault exists or the engine oil level is too low.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
36 Instruments and Indicator/Warning Lights  
The following text will be displayed in the information display*:  
WARNING (continued)  
Engine fault Workshop!  
•
The red oil pressure light is not an oil level indicator! One should  
therefore check the oil level at regular intervals, preferably after every refu-  
eling stop.  
Coolant temperature/ Coolant quantity   
5)  
The warning light comes on for a few seconds when the ignition is switched on.  
EPC fault light  (petrol engine)  
The coolant temperature is too high or the coolant level too low if the warning light  
does not go out or flashes while driving.  
The  (Electronic Power Control) warning light comes on for a few seconds when  
the ignition is switched on.  
3 peeps sound as an additional warning signal.  
If the warning light  does not go out or lights up after starting the engine, a fault  
exists in the engine control. The engine management system selects an emergency  
programme which enables you to drive to the nearest specialist garage by adopting  
a gentle style of driving.  
In this case stop and switch the engine off and check the coolant level; top up the  
coolant as necessary.  
Do not continue your journey if for some reason it is not possible under the  
conditions prevailing to top up with coolant. Keep the engine switched off and  
obtain professional assistance from a specialist garage, otherwise it could lead to  
severe engine damage.  
The following text will be displayed in the information display*:  
Engine fault Workshop!  
If the coolant is within the specified range, the increased temperature may be  
caused by an operating problem at the coolant fan. Check the fuse for the coolant  
fan, replace it if necessary ⇒ page 259, “Fuse assignment in engine compartment”.  
Glow plug system (diesel engine)  
Do not continue driving if the warning light does not go off although the fluid is at  
the correct level and also the fuse of the fan is in proper order. Contact a specialist  
garage to obtain assistance.  
The warning light lights up for a cold engine when switching on the ignition  
(pre-heat position) 2 ⇒ page 123. Start the engine after the indicator light goes out.  
The glow plug indicator light will come on for about 1 second if the engine is at a  
normal operating temperature or if the outside temperature is above +5°C. This  
means that you can start the engine right away.  
Please also refer to the additional instructions ⇒ page 228, “Cooling system”.  
The following text will be displayed in the information display*:  
Check coolant! Owner's manual  
There is a fault in the glow plug system if the warning light does not come on  
at all or lights up continuously. Contact a specialist garage as soon as possible to  
obtain assistance.  
If the warning light begins to flash while driving, a fault exists in the engine  
control. The engine management system selects an emergency programme which  
enables you to drive to the nearest specialist garage by adopting a gentle style of  
driving.  
5)  
The warning light on vehicles fitted with information display does not come on after  
switching the ignition on, but only if the coolant temperature is too high or the coolant level  
is too low.  
Instruments and Indicator/Warning Lights 37  
Electronic stability programme (ESP)*  
WARNING  
The warning light comes on for a few seconds when the ignition is switched on.  
•
If you must stop for technical reasons, then park the vehicle at a safe  
distance from the traffic and switch off the engine and switch on the hazard  
Components of the ESP system also include the Traction Control System (TCS),  
Electronic Differential Lock (EDL), and the Antilock Brake System (ABS).  
warning light system ⇒ page 64.  
•
Take care when opening the coolant expansion bottle. If the engine is hot,  
the cooling system is pressurized - risk of scalding! It is best to allow the  
engine to cool down before removing the cap.  
The warning light flashes when a control cycle is activated while driving.  
The warning light will come on and remains on if the ESP is switched off or if there  
is a fault in the system.  
•
Do not touch the coolant fan The coolant fan may switch on automati-  
cally even if the ignition is off.  
The fact that the ESP system operates together with the ABS means that the ESP  
warning light will also come on if the ABS system is not operating properly.  
If the warning light comes on immediately after starting the engine, the ESP  
system can be switched off for technical reasons. In this case, the ESP system can  
be switched on again by switching the ignition on and off. If the warning light goes  
out, the ESP system is fully functional again.  
Traction control system (TCS)   
The warning light comes on for a few seconds when the ignition is switched on.  
The warning light flashes when a control cycle is activated while driving.  
Further information on the ESP ⇒ page 193, “Electronic stability programme  
The warning light will come on and remains on if the TCS is switched off or if there  
is a fault in the system.  
(ESP)*”.  
Electronic Differential Lock (EDL)*  
The fact that the TCS system operates together with the ABS means that the TCS  
warning light will also come on if the ABS system is not operating properly.  
The EDL is a part of the ESP. A fault in the EDL is indicated by the ESP warning light  
in the instrument cluster. Have the vehicle inspected without delay by an author-  
ised Škoda Service Partner. Further information on the EDL ⇒ page 194, “Electronic  
Differential Lock (EDL)*”.  
If the warning light comes on immediately after starting the engine, the TCS  
system can be switched off for technical reasons. In this case, the TCS system can  
be switched on again by switching the ignition on and off. If the warning light goes  
out, the TCS system is fully functional again.  
Note  
Further information about the TCS ⇒ page 195, “Traction control system (TCS)”.  
If the battery has been disconnected and reconnected, the warning light comes  
on after switching on the ignition. The warning light must go out after driving a short  
distance.  
Note  
If the battery has been disconnected and reconnected, the warning light comes  
on after switching on the ignition. The warning light must go out after driving a short  
distance.  
Selector lever lock*   
If the green warning light lights up, operate the brake pedal. This is necessary, in  
order to be able to move the selector lever out of the position P or N.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
38 Instruments and Indicator/Warning Lights  
Further information about the selector lever lock ⇒ page 132.  
A fault in the ABS  
The system is not functioning properly if the ABS warning light does not go out  
within a few seconds after switching on the ignition, does not light up at all or lights  
up while driving. The vehicle will only be braked by the normal brake system. Visit  
a specialist garage as quickly as possible and adjust your style of driving appropri-  
ately as you will not know how great the damage is.  
Tyre inflation pressure*   
The warning light lights up, if there is a substantial drop in inflation pressure in  
one of the tyres. Reduce the speed and check or correct as soon as possible the  
inflation pressure in the tyres ⇒ page 238.  
Further information about ABS ⇒ page 197, “Antilock brake system (ABS)”.  
If the warning light flashes, there is a system fault. Visit the nearest specialist garage  
and have the fault rectified.  
A fault in the entire brake system  
If the ABS warning light comes on together with the brake system warning light  
(handbrake must be released), there is a fault not only in the ABS but also in  
another part of the brake system ⇒  
Further information about tyre pressure-control system ⇒ page 199.  
.
WARNING  
WARNING  
•
When the warning light lights up, immediately reduce the speed and  
•
If the brake system warning light comes on together with the ABS  
avoid sudden steering and brake manoeuvres. Please stop the vehicle  
without delay at the nearest possible stop and inspect the tyres and their  
inflation pressures.  
warning light stop the vehicle immediately and check the brake fluid  
level in the reservoir ⇒ page 231, “Brake fluid”. If the fluid level has dropped  
below the MIN marking, do not drive any further - risk of accident! Obtain  
professional assistance.  
•
Under certain circumstances (e.g. sporty style of driving, wintry or  
unpaved roads) the warning light can be delayed or does not light up at  
•
Pay attention to the following instructions before checking the brake  
fluid level and opening the bonnet ⇒ page 225, “Working in the engine  
all.  
compartment”.  
Note  
•
If the brake fluid is at the correct level, the ABS control function has  
If the battery has been disconnected, the warning light comes on after switching  
on the ignition. The warning light must go out after driving a short distance.  
failed. The rear wheels may then block very rapidly when braking. In certain  
circumstances, this can result in the rear end of the car breaking away - risk  
of skidding! Drive carefully to the nearest specialist garage and have the  
fault rectified.  
Antilock brake system (ABS)   
The warning light shows the functionality of the ABS.  
Bonnet   
The warning light comes on for a few seconds after the ignition has been switched  
on or when starting the engine. The warning light goes out after an automatic check  
sequence has been completed.  
The warning light comes on if the bonnet is unlocked. If the bonnet unlocks  
while driving, the warning light lights up and as a warning an audible signal  
sounds.  
Instruments and Indicator/Warning Lights 39  
The warning light comes on even when the ignition is switched off. The warning  
light lights up for a maximum of 5 minutes.  
Boot lid   
The warning light comes on when the ignition is switched on if the luggage  
compartment door is open. If the boot lid opens while driving , the warning light  
lights up and an audible signal sounds.  
On vehicles with information display* this warning light is replaced by a vehicle  
symbol ⇒ page 27.  
An audible signal sounds as an additional warning signal.  
Seat belt warning light   
The warning light comes on even when the ignition is switched off. The warning  
light lights up for a maximum of 5 minutes.  
The warning light comes on after the ignition is switched on as a reminder for the  
driver and front passenger to fasten the seat belt. The warning light only goes out if  
the driver or front passenger has fastened his seat belt.  
On vehicles with information display* this warning light is replaced by a vehicle  
symbol ⇒ page 27.  
If the seat belt has not been fastened by the driver or front passenger, a permanent  
warning signal sounds at vehicle speeds greater than 20 km/h and simultaneously  
the warning light flashes.  
Open door  
If the seat belt is not fastened by the driver or front passenger during the next 90  
seconds, the warning signal is deactivated and the warning light lights up perma-  
nently.  
The warning light comes on if one or several doors are opened or if the boot lid  
is opened. If one of the doors opens while driving, the warning light lights up  
and an audible signal sounds.  
Further information on the seat belts ⇒ page 168, “Seat belts”.  
The warning light comes on even when the ignition is switched off. The warning  
light lights up for a maximum of 5 minutes.  
On vehicles with information display* this warning light is replaced by a vehicle  
symbol ⇒ page 27.  
Thickness of the brake pads*   
6)  
The warning light comes on for a few seconds when the ignition is switched  
on.  
Windshield washer fluid level*  
If the warning light comes on, contact a specialist garage immediately and have  
the brake pads on all of the wheels inspected.  
The warning light comes on when the ignition is switched on if there is insuffi-  
cient fluid in the windshield washer system. Top up with liquid ⇒ page 236.  
The following text will be displayed in the information display*:  
The following text will be displayed in the information display*:  
Check brake pads!  
Add wash fluid!  
6)  
The warning light on vehicles fitted with information display does not come on after  
switching the ignition on, but only if a fault exists.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
40 Instruments and Indicator/Warning Lights  
Brake system   
WARNING (continued)  
dropped below the MIN marking, do not drive any further - risk of accident!  
Obtain professional assistance.  
The warning light flashes or comes on if the brake fluid level is too low, if there  
is a fault in the ABS or if the handbrake is applied.  
If the warning light flashes and an audible signal sounds three times (handbrake  
is not applied), stop and check the brake fluid level ⇒  
.
Alternator   
The following text will be displayed in the information display*:  
The warning light comes on after the ignition has been switched on. It should go  
out after the engine has started.  
Brake fluid Owner's manual  
If there is a fault in the ABS which also influences the function of the brake system  
(e.g. distribution of brake pressure), the ABS warning light comes on and at the  
same time the brake system warning light starts flashing . Be aware that not only  
If the warning light does not go out after the engine has started, or comes on when  
driving, drive to the nearest specialist garage. The vehicle battery will be discharged  
in this case so switch off all non-essential electrical components.  
the ABS but also another part of th brake system is defective ⇒  
.
An audible signal sounds three times as an additional warning signal.  
Caution  
One should get used to high pedal forces, long braking distances and long free play  
of the brake pedal when driving to the next specialist garage.  
If the warning light comes on when driving and in addition the warning light   
(cooling system fault) also comes on in display, you must then stop the car imme-  
diately and switch the engine off - risk of engine damage!  
For further information on the brake system ⇒ page 196, “Brakes”.  
Handbrake applied  
Engine oil level   
The warning light also comes on if the handbrake is applied. An audible warning  
is also given if you drive the vehicle for at least 3 seconds at a speed of more than 6  
km/h.  
Warning light lights up  
If the warning light lights up, the quantity of oil in the engine is probably too low.  
Check as soon as possible the oil level or top up ⇒ page 228, “Replenishing engine  
oil” with engine oil.  
The following text will be displayed in the information display*:  
Release parking brake!  
A peep sounds as an additional warning signal.  
The following text will be displayed in the information display*:  
Check oil level!  
WARNING  
•
Pay attention to the following instructions before checking the brake  
fluid level and opening the bonnet ⇒ page 225, “Working in the engine  
The warning light will go out if the bonnet is left open for more than 30 seconds. If  
no engine oil has been replenished, the warning light will come on again after  
driving about 100 km.  
compartment”.  
•
If the brake system warning light does not go out a few seconds after  
switching on the ignition or comes on when driving, stop immediately and  
check the brake fluid in the reservoir ⇒ page 231. If the fluid level has  
Instruments and Indicator/Warning Lights 41  
Warning light flashes  
A fault on the engine oil level sensor is indicated additionally by an audible signal  
and the warning light coming on several times after the ignition has been switched  
on.  
In this case have the engine inspected without delay by a specialist garage.  
The following text will be displayed in the information display*:  
Oil sensor Workshop!  
Fuel reserve   
The warning light comes on, if the fuel level is still below 9 litres.  
An audible signal sounds as an additional warning signal.  
The following text will be displayed in the information display*:  
Please refuel! Range...km  
Note  
The Text in the information display* goes out only after refuelling and driving a  
short distance.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
42 Unlocking and locking  
Unlocking and locking  
Key  
WARNING (continued)  
vehicle. The children might otherwise start the engine or operate electrical  
equipment (e.g. power windows) - risk of injury!  
•
Do not withdraw the ignition key from the ignition lock until the vehicle  
has come to a stop. The steering lock might otherwise engage unintention-  
ally - risk of accident!  
Caution  
•
Each key contains electronic components; therefore protect them against mois-  
ture and severe shocks.  
Fig. 36 Set of keys without  
remote control  
•
Keep the groove of the keys absolutely clean as impurities (textile fibres, dust  
etc.) have a negative effect on proper operation of the keys and the ignition lock.  
Note  
Please approach an authorised Škoda Service Partner if you lose a key since he can  
obtain a new one for you.  
Changing the battery of the radio remote control  
Fig. 37 Remote control key  
Two keys are provided with the vehicle. Depending on the equipment, your vehicle  
can be equipped with keys without radio remote control ⇒ fig. 36 or with radio  
remote control* ⇒ fig. 37.  
WARNING  
Fig. 38 Disconnect key with  
radio remote control  
•
Always withdraw the key whenever you leave the vehicle - even if it is  
only for a short time. This is particularly important if children are left in the  
Unlocking and locking 43  
For the sake of the environment  
Dispose of an old battery in accordance with environmental regulations.  
Note  
•
The replacement battery must have the same specification as the original  
battery.  
•
If it is still not be possible to unlock or lock the vehicle with the remote control  
even after replacing the battery this means that the system has to be synchronised  
Fig. 39 Cover of the trans-  
mitter housing  
⇒ page 50.  
Each remote control key contains a battery which is housed in the cover  
Electronic immobiliser  
B
A of the transmitter housing ⇒ page 42, fig. 38. We recommend that  
you have the batteries of the key replaced by an authorised Škoda Service  
Partner. You should, however, proceed as follows if you wish to replace  
the battery yourself:  
The electronic immobiliser prevents the vehicle being operated by an  
unauthorised person.  
An electronic chip is integrated in the head of the key. The immobiliser is deacti-  
vated with the aid of this chip when the key is inserted in the ignition lock. The elec-  
tronic immobiliser is automatically activated when you withdraw the ignition key  
from the lock.  
–
–
Fold open the key.  
A
Use a thin screwdriver to carefully lever off the front part of the key A  
⇒ page 42, fig. 38 from the transmitter housing A.  
B
–
Take off the cover of the transmitter housing ⇒ fig. 39 in direction of  
arrow.  
Note  
It is only possible to start the engine of your car with a Genuine Škoda key with the  
matching code.  
–
–
Take the used battery out of the housing cover.  
Insert the new battery. Ensure that the “+” symbol on the battery is  
facing downwards. The correct polarity is also shown on the cover of  
the transmitter housing.  
–
–
Insert cover with battery in place at the rear of the transmitter housing  
and press both parts together.  
Insert the transmitter housing into the front part of the key so that the  
two parts lock into each other.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
44 Unlocking and locking  
Child safety lock  
Central locking system  
The child safety lock prevents the rear door from being opened from  
the inside.  
Description  
Unlocking or locking causes all the doors and the fuel filler flap* to be unlocked or  
locked at the same time by the central locking system (as long as it is not set differ-  
ently in the menu Setup (settings) - Convenience information display*). The boot  
lid is unlocked when opening. It can be opened by pressing the hand grip above the  
licence plate ⇒ page 48.  
Operation of the central locking system is possible:  
•
•
•
from the outside using the vehicle key ⇒ page 46,  
using the button for the central locking system ⇒ page 46,  
by using the remote control ⇒ page 50.  
Fig. 40 Child safety locks on  
the rear doors  
Indicator light in the driver's door on vehicles without anti-theft alarm system  
After the car is locked, the indicator light flashes after 2 seconds.  
The rear doors are equipped with a child safety lock. You can switch the  
child safety lock on and off using the vehicle key.  
After the car is locked with the deactivated safe securing system, the indicator light  
flashes only after 30 seconds.  
Switching child safety lock on  
Indicator light in the driver's door on vehicles with anti-theft alarm system  
–
Use the vehicle key to turn the slit in the rear door to the left in the  
After locking the vehicle the indicator light flashes for 2 seconds fast, then more  
slowly.  
direction of the arrow ⇒ fig. 40.  
If the vehicle is locked and the safe securing system ⇒ page 45 is not operating, the  
indicator light in the driver door flashes for about 2 seconds fast, goes out and starts  
to flash slowly after about 30 seconds.  
Switching child safety lock off  
–
Use the vehicle key to turn the slit to the right against the direction of  
the arrow.  
If the indicator light first of all flashes fast for about 2 seconds, afterwards lights up  
for about 30 seconds and then flashes slowly, there is a fault in the system of the  
central locking or the interior monitor* ⇒ page 51. Visit a specialist garage to  
obtain assistance.  
So long as the child safety lock is switched on it is not possible to open the door  
from the inside with the door opening lever. In this case the door can be opened  
only from the outside.  
Convenience operation of windows  
One can open and close the electrically powered windows when unlocking and  
locking the vehicle ⇒ page 54.  
Unlocking and locking 45  
Opening a single door*  
Safe securing  
This function allows one to just unlock the driver's door. The other doors and the  
fuel filler flap* remain locked and are only unlocked after repetitive unlocking.  
7)  
The central locking system is equipped with a safe securing system. Locking the  
vehicle from the outside causes the door locks to be automatically blocked. It is not  
possible to open the doors with the door handle either from the inside or from the  
outside. This acts as an effective deterrent for attempts to break into your vehicle.  
If you wish, you can have your authorised Škoda Service Partner activate the func-  
tion of the single door opening mode.  
Automatic locking*  
You can deactivate the safe securing system by locking twice within 2°seconds.  
All the doors and the boot lid are locked automatically once the car reaches a speed  
of about 15 km/h.  
If the safe securing system is not operating, the warning light in the driver door  
flashes for about 2 seconds fast, goes out and starts to flash slowly again after about  
30°seconds.  
If the ignition key is withdrawn, the car is then automatically unlocked again. In  
addition, it is possible for the driver to unlock the car by pressing the central locking  
button or by pulling the door opening lever.  
The safe securing system is again activated the next time the vehicle is unlocked and  
locked again.  
If you wish, your Škoda Dealer can activate the function of the automatic locking  
mode.  
The doors can be opened from the inside if the vehicle is locked and the safe  
securing system is deactivated:  
•
•
The door is unlocked by actuating the door-opening lever.  
The door opens upon actuating the door-opening lever again.  
WARNING  
Locking the doors prevents involuntary opening in an exceptional situation  
(an accident). Locked doors prevent unwanted entry into the vehicle from  
outside, for example at road crossings. Locked doors do, however, make it  
more difficult for rescuers to get into the vehicle in an emergency - danger to  
life!  
WARNING  
If the vehicle is locked from the outside and the safe securing system is acti-  
vated, there must not be any person and animals in the vehicle as it is then  
not possible to open either a door or a window from the inside. The locked  
doors make it more difficult for rescuers to get into the vehicle in an emer-  
gency - hazard!  
Note  
•
In the event of an accident in which the airbags are deployed, the locked doors  
are automatically unlocked in order to enable rescuers to gain access to the vehicle.  
Only the front doors can be unlocked and locked using the key if the central  
locking system fails. You can lock or unlock manually the other doors and the boot  
lid.  
Note  
•
The anti-theft alarm system* is also activated with the deactivated safe securing  
system when locking the vehicle. The interior monitor* is however not activated.  
−
−
Emergency locking of the door ⇒ page 47.  
Emergency unlocking of the boot lid ⇒ page 48.  
7)  
Only valid for some countries.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
46 Unlocking and locking  
door. The alarm will be triggered if you do not switch on the ignition within 15  
seconds.  
Unlocking the vehicle using the key  
Closing the vehicle with the key  
–
Turn the key in the lock of the driver's door in the opposite direction of  
B
travel (closing position) A ⇒ fig. 41.  
•
•
•
The doors, the boot lid and the fuel filler flap* are locked.  
The switched on interior lights will switch off over the door contact.  
The windows and the electric sliding/tilting roof* are closed provided the key is  
held in the locking position.  
Fig. 41 Turning the key for  
unlocking and locking the  
vehicle  
•
•
The safe securing system is activated immediately.  
The indicator light in the driver door begins flashing.  
–
Turn the key in the lock of the driver's door in the direction of travel  
A
(opening position) A ⇒ fig. 41.  
–
Pull on the door handle and open the door.  
Note  
The opened driver door cannot be locked. It must be locked separately after closing  
it.  
•
All the doors (only the driver's door on vehicles with anti-theft alarm system)  
and the fuel filler flap* are unlocked.  
•
•
•
•
The boot lid is then unlocked.  
Button for the central locking system  
The switched on interior lights come on over the door contact.  
The safe securing system is deactivated.  
The windows are opened provided the key is held in the opening position*. On  
vehicles fitted with anti-theft alarm system the window operation is only possible  
45 seconds after deactivation of the warning system.  
•
The indicator light in the driver's door stops flashing if the vehicle is not fitted  
with an anti-theft alarm system* ⇒ page 51.  
Note  
If the vehicle is equipped with an anti-theft alarm system*, you must unlock the  
vehicle by inserting the key into the driver door you then have to insert the key into  
the ignition lock and switch the ignition on within 15 seconds after opening the  
Fig. 42 Centre console:  
Buttons for central locking  
Unlocking and locking 47  
If the vehicle was not locked from outside, you can also unlock and lock  
it with the rocker switch on the centre console without the ignition  
switched on.  
Note  
The door opening lever and the buttons for the central locking system do not  
operate if the safe securing system is activated.  
Locking all doors and the boot lid  
1
–
Press button A⇒ page 46, fig. 42. The symbol in the button comes  
Emergency locking of the doors  
on.  
Unlocking all doors and the boot lid  
2
–
Press button A ⇒ page 46, fig. 42. The symbol goes out in the  
button.  
1
The following applies if you have locked your vehicle using the button A:  
•
It is not possible to open the doors or the boot lid from the outside (safety  
feature, e.g. when stopping at traffic lights etc.).  
You can unlock the doors individually from the inside and open them by pulling  
the door opening lever.  
As long as one door is opened , the vehicle cannot be locked in order to avoid  
inadvertently locking the key in the vehicle.  
In the event of an accident in which the airbags are deployed, the locked doors  
•
Fig. 43 Rear door: Emer-  
gency locking of the door  
8)  
•
An emergency locking mechanism is located on the rear side of the doors  
which have no locking cylinder; it is only visible after opening the door.  
•
are automatically unlocked from the inside in order to enable rescuers to gain  
access to the vehicle.  
Locking  
1
2
By pressing and holding the button A or A, you can conveniently close or open  
the windows ⇒ page 54.  
A
–
–
Remove the panel A ⇒ fig. 43.  
Insert the key into the opening under the panel and press the stopping  
B
lever A as far as the stop toward the inside.  
WARNING  
–
Re-insert the panel.  
The central locking system also operates if the ignition is switched off. All the  
doors and the boot lid are locked. Children should never be left unattended  
in the vehicle since it is difficult to provide assistance from the outside when  
the doors are locked. Locked doors make it difficult for rescuers to get into  
the vehicle in an emergency - hazard!  
After closing the door, you can no longer open it from outside. If the child safety  
lock is not switched on, it is possible to open the door from the inside by pulling  
twice on the door handle. If the child safety lock is switched on, it is necesary to also  
open the door from outside besides pulling twice on the inner door handle.  
8)  
Is not valid for the boot lid.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
48 Unlocking and locking  
Boot lid  
Note  
•
After closing the boot lid, it is automatically locked within 2 seconds and  
the anti-theft alarm system* is activated. This applies only if the vehicle was  
locked before closing the boot lid.  
•
The function of the hand grip above the licence plate is deactivated when  
starting off or as of a speed of more than 5 km/hour for vehicles with central  
locking. The function of the hand grip is activated again when the vehicle has  
stopped and a door is opened.  
Emergency unlocking of the boot lid (Octavia)  
Fig. 44 Handle of boot lid  
Open the boot lid by pressing the hand grip above the licence plate after  
unlocking the vehicle using the key or the radio remote control.  
Opening the boot lid  
–
Press on the handle ⇒ fig. 44 and at the same time raise the boot lid.  
Closing the boot lid  
Pull the boot lid down and close it with a slight swing ⇒  
Fig. 45 Emergency  
unlocking of the boot lid  
–
.
A handle which makes the closing easier is located on the inner paneling of the  
boot lid.  
If there is a fault in the central locking, you can open the boot lid as  
follows:  
WARNING  
–
–
–
Fold the seat backrest forwards ⇒ page 81.  
•
Ensure that the lock is properly engaged after closing the boot lid. Other-  
wise, the boot lid might open suddenly when driving even if the boot lid lock  
is closed - risk of accident!  
A
Take out the warning triangle* A ⇒ fig. 45.  
Press the operating lever in the direction of arrow in order to unlock  
B
the boot lid. The operating lever is located under the panel A.  
•
Never drive with the boot lid fully opened or slightly ajar otherwise  
exhaust gases may get into the interior of the vehicle - risk of poisoning!  
Do not press on the rear window when closing the boot lid, it could crack  
- risk of injury!  
–
Open the boot lid/luggage compartment door from outside.  
•
Unlocking and locking 49  
The transmitter with the battery is housed in the handle of the remote control key.  
The receiver is located in the interior of the car. The operating range of the remote  
control is approx. 10 m. But this range of the remote control can be reduced if the  
batteries are weak.  
Emergency unlocking of the boot lid (Estate car)  
The remote control key has a fold-open key bit which can be used for unlocking and  
locking the car manually and also for starting the engine.  
If a lost key is replaced or if the receiver unit has been repaired or a new unit  
installed, it is then necessary for an authorised Škoda Service Partner to initialise the  
system. Only after this is it possible to again use the remote control.  
Fig. 46 Emergency  
unlocking of the boot lid  
Note  
•
The remote control is automatically deactivated when the ignition is switched  
on.  
If there is a fault in the central locking, you can open the boot lid as  
follows:  
•
The operation of the remote control may temporarily be affected by interfer-  
ence from transmitters close to the car and which operate in the same frequency  
range (e.g. mobile phone, TV transmitter).  
–
–
–
Fold the seat backrest forwards ⇒ page 81.  
•
The battery must be replaced, ideally by an authorised Škoda Service Partner, if  
Open up the cover of the lock upwards ⇒ fig. 46.  
the central locking or anti-theft alarm system does react to the remote control at  
less than 3 metres away.  
A
Move the operating lever A with the aid of a narrow object e.g.  
•
If the driver door is opened, the vehicle cannot be locked using the remote  
screwdriver up to the stop in the direction of arrow; the boot lid is then  
unlocked.  
control.  
–
Open the boot lid/luggage compartment door from outside.  
Remote control*  
Description  
You can use the remote control:  
•
•
•
to unlock and lock the car,  
unlocking boot lid,  
electrically open and close the windows.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
50 Unlocking and locking  
Unlocking and locking car  
1
button A but do not open a door or the boot lid within the next 30 seconds. This  
function is intended to prevent the car being unlocked unintentionally.  
In addition, when the car is unlocked, the electrically adjustable seats and exterior  
mirrors* move into the position assigned to this key. The stored setting of driver  
seat and exterior mirrors is retrieved.  
Display of the locking  
The turn signal lights flash once to confirm that the vehicle has been correctly  
locked.  
3
If the vehicle is locked by pressing the button Aand some doors or the boot lid are  
not closed, the turn signal lights flash only after closing.  
Fig. 47 Remote control key  
WARNING  
Unlocking the vehicle  
If the vehicle is locked from the outside and the safe securing system is acti-  
vated, there must not be any person in the vehicle as it is then not possible  
to open either a door or a window from the inside. The locked doors make it  
more difficult for rescuers to get into the vehicle in an emergency - hazard!  
1
–
Press the button A ⇒ fig. 47 for about 1 second.  
Locking the vehicle   
3
–
Press button A for about 1 second.  
Note  
Deactivating safe securing system  
•
Operate the radio remote control only when the doors and boot lid are closed  
and you have visual contact with the vehicle.  
Once in the car, you must not press the lock button of the radio remote  
control before inserting the key into the ignition lock in order to avoid the car being  
inadvertently locked and, in addition, the anti-theft alarm system* being switched  
on. Should this happen, press the unlock button of the radio remote control.  
2
–
Press button A twice in 3 seconds. Further information ⇒ page 45.  
•
Boot lid remote release  
2
–
Press button A for about 2 second. Further information ⇒ page 48.  
Folding out of the key  
4
–
Press button A.  
Synchonisation of the remote control  
Folding up of the key  
If the vehicle cannot be unlocked by actuating the remote control system then it is  
possible that the code in the key and the control unit in the vehicle are no longer  
synchronised. This can occur when the buttons on the radio-operated key are actu-  
ated a number of times outside of the operative range of the equipment or the  
battery on the remote control was replaced.  
4
–
Press button A and collapse the key bit in the housing.  
The turn signal lights flash twice as confirmation that the vehicle has been  
unlocked. The vehicle will lock again automatically if you unlock the vehicle using  
Unlocking and locking 51  
This means it is necessary to synchronise the code as follows:  
•
•
•
Angle of the vehicle* ⇒ page 51,  
Vehicle interior* ⇒ page 51,  
•
•
Press any button on the remote control.  
A drop in voltage of the on-board power supply.  
Pressing of the button means that the door will unlock with the key within 1  
minute.  
An alarm is immediately triggered if either of the two battery terminals is discon-  
nected while the anti-theft alarm system is activated.  
How is the alarm switched off?  
Anti-theft alarm system*  
You switch the alarm off if you unlock the car with the radio remote control in the  
key or if you switch the ignition on.  
Description  
The anti-theft alarm system increases the level of protection against people seeking  
to break into the vehicle. The system triggers audible and visual warning signals if  
an attempt is made to break into the vehicle.  
Note  
•
The working life of the alarm siren is 6 years. More detailed information is avail-  
able by a specialist garage.  
Before leaving the car, check that all the doors, windows and the electric  
sliding/tilting roof* are properly closed in order to ensure that the anti-theft alarm  
system is fully operational.  
How is the alarm system activated?  
•
The anti-theft alarm system is activated automatically when the vehicle is locked  
with the key on the closed driver's door or by using the radio remote control. It is  
activated 30 seconds after closing the door.  
•
Coding of the radio remote control and the receptor part precludes the use of  
the radio remote control from other vehicles.  
How is the alarm system deactivated?  
The anti-theft alarm system is deactivated if the vehicle is unlocked by only using  
the radio remote control. The vehicle is automatically locked again if the vehicle is  
not opened within 30 seconds after reactivating the anti-theft alarm system.  
Interior monitor* and Towing protection monitoring*  
Once you unlock the vehicle by inserting the key into the driver door you then have  
to insert the key into the ignition lock and switch the ignition on within 15 seconds  
after opening the door in order to deactivate the anti-theft alarm system. The  
alarm will be triggered if you do not switch on the ignition within 15 seconds.  
When is the alarm triggered?  
The following security areas of the locked vehicle are monitored:  
•
•
•
•
Bonnet,  
Fig. 48 Button for interior  
monitor and towing protec-  
tion monitoring  
Boot lid,  
Doors,  
Ignition lock,  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
52 Unlocking and locking  
Switch off the interior monitor and towing protection monitoring  
Power windows*  
–
–
–
Switch off the ignition.  
Open the driver door.  
Buttons on the driver's door  
Press the button at the centre column on the driver side  
⇒ page 51, fig. 48, the symbol which lights up in the button  
changes from red to orange.  
–
Lock the vehicle within 30 seconds.  
The interior monitor and the towing protection monitoring are switched on again  
automatically the next time the car is locked.  
Fig. 49 Buttons on the  
driver's door  
Note  
•
You can switch the interior monitor and the towing protection monitoring off if  
there is a possibility that movements from (e.g. children or animals) inside the  
vehicle interior or if the vehicle must be transported (e.g. by train or ship) or towed,  
might trigger the alarm.  
The power windows operate only when ignition is switched on.  
Opening a window  
•
The opened storage compartment for spectacles reduces the effectiveness of  
–
A window is opened by pressing lightly on the respective button in the  
door. The process stops when one releases the button.  
the interior monitor. In order to ensure the function of the interior monitor to be  
fully operational, always close the storage compartment for spectacles before  
locking the vehicle.  
–
Additionally you can open the window automatically (fully opened) by  
pressing the button up to the stop. Renewed pressing of the button  
causes the window to stop immediately.  
Closing a window  
–
A window is closed through pulling lightly on the respective button in  
the door. The closing process stops when one releases the button.  
–
Additionally you can close the window automatically (fully closed) by  
pulling the button up to the stop. Renewed pulling of the button  
causes the window to stop immediately.  
The buttons for the individual windows are located in the armrest of the driver's  
door ⇒ fig. 49, front passenger door and in the rear doors* ⇒ page 53.  
Unlocking and locking 53  
Buttons for the power windows in the armrest for the driver  
•
When driving always use the existing heating, air conditioning and ventilation  
system for ventilating the interior of the vehicle. If the windows are opened, dust as  
well as other dirt can get into the vehicle and in addition the wind noise is more at  
certain speeds.  
A
A Button for the power window in the driver's door  
B
A Button for the power window in the front passenger's door  
C
A Button for the power window in the rear door on the right*  
D
A Button for the power window in the rear door on the left*  
Button in front passenger door and in rear doors  
S
A Safety pushbutton*  
Safety pushbutton*  
You can deactivate the switches for power windows at rear doors by pressing the  
S
safety pushbutton A ⇒ page 52, fig. 49. The buttons for power windows at rear  
S
doors are activated again by pressing the safety pushbutton Aagain.  
If the buttons for the rear doors are deactivated, the indicator light in the safety  
S
switch A lights up.  
Fig. 50 Position of button in  
front passenger door  
WARNING  
•
If you lock the vehicle from the outside, do not leave any person in the  
vehicle since it is no longer possible to open the windows from the inside in  
an emergency.  
A button for the relevant window is provided in these doors.  
•
The system is fitted with a force limiter ⇒ page 54. If there is an obstacle,  
Opening a window  
the closing process is stopped and the window goes down by several centim-  
eters. You should then take particular care when closing the windows! You  
may otherwise suffer severe injuries as a result of getting an arm, for  
example, jammed in the window!  
–
Lightly press the appropriate switch down and hold it until the  
window has moved into the desired position.  
–
Additionally you can open the window automatically (fully opened) by  
pressing the switch down up to the stop. Renewed pressing of the  
button causes the window to stop immediately.  
•
It is recommended to deactivate the electrically operated power  
S
windows in the rear doors (safety pushbutton) A⇒ page 52, fig. 49 when  
children are being transported on the rear seats.  
Closing a window  
Note  
–
Lightly press the appropriate switch up and hold it until the window  
•
After switching the ignition off, it is still possible to open or close the windows  
for a further 10 minutes. During this time the automatic closing and opening func-  
tions of the window will operate. The power windows are switched off completely  
once you open the driver or front passenger door.  
has moved into the desired position.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
54 Unlocking and locking  
The force limiter is only switched off, if you attempt to close the window within the  
next 10 seconds - the window closes now with full strength!  
–
Additionally you can close the window automatically (fully closed) by  
pressing the switch up up to the stop. Renewed pressing of the button  
causes the window to stop immediately.  
If you wait longer than 10 seconds, the force limiter is switched on again.  
WARNING  
WARNING  
The system is fitted with a force limiter ⇒ page 54. If there is an obstacle, the  
closing process is stopped and the window goes down by several centime-  
ters. You should then take particular care when closing the windows! You  
may otherwise suffer severe injuries as a result of getting an arm, for  
example, jammed in the window!  
You should take particular care when closing the windows! You may other-  
wise suffer severe injuries as a result of getting an arm, for example, jammed  
in the window!  
Window convenience operation  
Note  
You can open and close the electrically powered windows as follows  
when unlocking and locking the vehicle (just closing of the sliding roof).  
•
After switching the ignition off, it is still possible to open or close the windows  
for a further 10 minutes. The automatic closing and opening functions will not  
operate during this time. The power windows are switched off completely once you  
open the driver or front passenger door.  
Opening a window  
–
Hold the key in the locking cylinder of the driver's door in the opening  
position or press the opening button of the radio remote control until  
all the windows are opened.  
•
If the child safety lock is switched on, the lighting of the switch for the window  
lifter in the rear doors* is not activated.  
Closing a window  
Force limiter of the power windows  
–
Turn the key in the lock of the driver door into the closing position or  
press the closing button of the radio remote control until all the  
windows are closed.  
The electrically operated power windows are fitted with a force limiter. It reduces  
the risk of bruises or injuries when closing the windows.  
If there is an obstacle, the closing process is stopped and the window goes down by  
several centimeters.  
You can interrupt the opening or closing operation of the windows immediately by  
releasing the key or the lock button.  
If the obstacle prevents the window from being closed during the next 10 seconds,  
the closing process is interrupted once again and the window goes down by several  
centimeters.  
WARNING  
You must try to close the window once again within 10 seconds after the window  
has gone down twice, even if the obstacle was not yet removed, the closing process  
is stopped. During this time it is not possible to automatically close the window. The  
force limiter is still switched on.  
The system is fitted with a force limiter ⇒ page 54. If there is an obstacle, the  
closing process is stopped and the window goes down by several centime-  
ters. You should then take particular care when closing the windows! You  
Unlocking and locking 55  
WARNING (continued)  
WARNING (continued)  
may otherwise suffer severe injuries as a result of getting an arm, for  
example, jammed in the window!  
ters. You should then take particular care when closing the windows! You  
may otherwise suffer severe injuries as a result of getting an arm, for  
example, jammed in the window!  
Note  
On vehicles fitted with anti-theft alarm system the convenience window opening is  
possible by means of the key in the locking cylinder only 45 seconds after deacti-  
vating the warning system or after activating the anti-theft alarm system.  
Electric sliding/tilting roof*  
Description  
Operational faults  
Electrically operated power windows do not operate  
If the battery of the car has been disconnected and then reconnected, the electri-  
cally operated power windows do not operate. The system must be activated.  
Proceed as follows in order to re-establish the function:  
•
•
Switch on the ignition.  
Press the relevant switch top and hold it pressed as long as necessary until the  
window is closed.  
Fig. 51 Control dial for the  
power sliding/tilting roof  
•
•
Release the switch.  
Press once again the relevant switch top and hold it pressed for approx. 3  
The sliding/tilting roof is operated by means of the control dial ⇒ fig. 51 and only  
functions when the ignition is switched on. The control dial has a number of fixed  
positions.  
seconds.  
Operation in winter  
Ice accumulating on the surface of the windows during the winter may result in a  
greater resistance when closing the windows and the window may stop and go  
down several centimetres  
After switching the ignition off, it is still possible to open or close the sliding/tilting  
roof for a further 10 minutes. It is no longer possible to operate the sliding/tilting  
roof after opening or closing one of the front doors, however.  
It is necessary to put the force limiter out of operation in order to close the window  
⇒ page 54, “Force limiter of the power windows”.  
Note  
If the battery has been disconnected and reconnected, it is possible that the  
sliding/tilting roof does not close fully. Here you have to set the control dial to the  
WARNING  
A
switch position A and press it forward for about 10 seconds.  
The system is fitted with a force limiter ⇒ page 54. If there is an obstacle, the  
closing process is stopped and the window goes down by several centime-  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
56 Unlocking and locking  
Opening and tilting  
Comfort position  
WARNING  
Close the sliding/tilting roof carefully - risk of injury!  
C
B
–
Turn the switch to position A ⇒ page 55, fig. 51.  
Convenience operation  
Opening roof fully  
–
Turn the switch to position A and hold it in this position (spring-  
tensioned position).  
You can also close an open sliding/tilting roof from the outside.  
–
Hold the key in the locking cylinder of the driver's door in the closing  
position or press the closing button of the remote control until the  
Tilting roof  
Turn the switch to position A.  
sliding/tilting roof is closed ⇒  
.
D
–
The closing operation stops when one releases the key or the lock button.  
The wind noise in the comfort position is less than when the roof is fully opened.  
The sun screen is also opened automatically when the roof slides open. You can  
slide the sun screen into the opened or closed position by hand when the  
sliding/tilting roof is closed.  
WARNING  
Close the sliding/tilting roof carefully - risk of injury! The overload protec-  
tion system does not function with the convenience closing.  
Caution  
It may be necessary during winter to remove any ice and snow in the area of the  
sliding/tilting roof before opening it in order to prevent damaging the opening  
mechanism.  
Emergency operation  
Closing  
Sliding closed/closing the sliding/tilting roof  
A
–
Turn the switch to position A ⇒ page 55, fig. 51.  
Safety closing  
Fig. 52 Detail of the head-  
liner: Points for positioning  
screwdriver  
The sliding/tilting roof is equipped with an overload protection system. If an  
obstacle (e.g. ice) prevents closing, the sliding/tilting roof stops and opens  
completely. You can close the sliding/tilting roof completely without overload  
A
protection by pressing the switch to the A position ⇒ page 55, fig. 51 at the front  
for as long as it takes for the sliding/tilting roof to shut completely ⇒  
.
Unlocking and locking 57  
Fig. 53 Detail of the head-  
liner: Emergency operation  
You can close and/or open the sliding/tilting roof by hand if the system is  
defect.  
–
Position the flat blade of a screwdriver carefully against the rear edge  
of the cover of the electrical drive ⇒ page 56, fig. 52.  
–
–
Pull the cover down.  
Insert an Allen key, Group 4, up to the stop into the opening and close  
and/or open the sliding/tilting roof ⇒ fig. 53.  
–
–
Press on the cover again by first of all inserting the plastic lugs and  
then pushing the cover up.  
Have the fault rectified by a specialist workshop.  
Note  
It is necessary after each emergency operation to move the sliding/tilting roof into  
the basic position. Here you have to turn the control dial forward to the switch posi-  
A
tion A ⇒ page 55, fig. 51 and press for about 10 seconds.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
58 Lights and Visibility  
Lights and Visibility  
On models fitted with right-hand steering the position of certain switches differs  
from that shown in ⇒ fig. 54. The symbols which mark the switch positions are  
identical, however.  
Lights  
Switching lights on and off   
WARNING  
Never drive with side lights on - risk of accident! The side lights are not  
bright enough to light up the road sufficiently in front of you or to be seen by  
other oncoming traffic. In this case, always switch on the low beam when it  
is dark or if visibility is poor.  
Note  
•
An audible warning will sound if you withdraw the ignition key and open the  
driver's door when the vehicle lights are still on.  
The acoustic warning signal is switched off over the door contact when the  
Fig. 54 Dash panel: Light  
switch  
•
driver's door is closed (ignition off). The vehicle can be parked with the side lights  
on.  
Switching on side lights  
–
Turn the light switch into position .  
•
If the car is parked for a lengthy period, we recommend switching off all lights,  
or leaving only the parking lights switched on.  
The switching on of the described lights should only be undertaken in accord-  
ance with the legal requirements.  
Switching on the low beam and main beam  
•
–
–
Turn the light switch into position .  
•
•
If a fault occurs in the light switch, the low beam comes on automatically  
In the event of cool or humid weather conditions, the headlights can be misted  
Press the main beam lever forward in order to switch on the main  
beam ⇒ page 64, fig. 60.  
up from inside.  
−
The temperature difference between interior and external area of the head-  
Switching off lights (except daylight driving lights)  
Turn the light switch into position°0.  
light lenses is decisive.  
–
−
When the driving lights are switched on, the light outlet surfaces are free  
from mist after a short period. The headlight lenses can possibly mist up at the  
border areas.  
Low beam comes on only if the ignition is switched on. After switching off the igni-  
tion, the low beam is switched off automatically and only the side lights come on.  
For vehicles which are equipped with the function Coming/Leaving-Home*  
⇒ page 60, the side lights also go out.  
−
−
It also concerns reverse light and turn signal lights.  
This mist has no influence on the life of the lighting system.  
Lights and Visibility 59  
Daylight driving lights*  
Automatic light control*  
In some countries, the national legislation requires that the vehicles are  
equipped with the function daylight driving lights.  
Switching on daylight driving lights  
–
Switch on the ignition without turning the light switch out of the posi-  
tion 0.  
Deactivate function daylight driving lights  
Fig. 55 Dash panel: Light  
switch  
–
Pull the turn signal light lever towards the steering wheel up to 3  
seconds after switching on the ignition and at the same time, slide it to  
the bottom and hold it in this position for at least 3 seconds.  
Switching on automatic light control*  
Activate function daylight driving lights  
–
Turn the light switch ⇒ fig. 55 into position .  
–
Pull the turn signal light lever towards the steering wheel up to 3  
seconds after switching on the ignition and at the same time, slide it to  
the top and hold it in this position for at least 3 seconds.  
Switching off automatic light control*  
Turn the light switch to the position 0, or .  
–
When the daylight driving lights are switched on, the side lights and the low beam  
come on together.  
If the light switch is in the position , the symbol illuminates when the ignition  
is switched on  next to the light switch. If the low beam is activated with the  
light sensor, the symbol illuminates additionally next to the light switch.  
On vehicles which are fitted with bulbs for daylight driving lights* in the fog lights,  
the parking lights do not come on when activating the function daylight driving  
If the light comes on automatically, the side lights and low beam as well as licence  
plate light light up at the same time.  
9)  
lights  
.
When the daylight driving lights are switched on, the illumination of the instrument  
cluster is switched off, however, it is switched on in the position when it is dark  
and the low beam shines with full brightness (100 % of the performance).  
If the automatic light control* is switched on, the light is regulated with the light  
sensor in the rear mirror holder. If the light intensity drops below the set value, e.g  
when driving during the day into a tunnel, the low beam and the side lights as well  
as the licence plate light come on automatically. If the light intensity increases  
again, the lights switch off automatically.  
On vehicles fitted with an information display*, you can activate or deactivate in the  
menu the function daylight driving lights:  
„
„
SETUP (Settings)  
Motorway lights  
Lights & Vision (Lights & Vision)  
If the automatic light control* has been switched on and the vehicle speed is over  
140 km/h for at least 10 seconds, the side lights and low beam are switched on  
automatically.  
9)  
Only valid for some countries.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
60 Lights and Visibility  
If the vehicle speed is below 65 km/h for at least 2 minutes, the lights are switched  
off.  
WARNING  
If the cornering lights are defective, the headlights are automatically  
lowered to the emergency position, which prevents a possible dazzling of  
oncoming traffic. Thus the illuminated length of the road is shortened. Drive  
carefully and have the car inspected immediately by a specialist garage.  
Rain lights  
If you switch on the windscreen wipe in the operation rain sensor* for longer than  
10 seconds or in the operation permanent wipe (position 2 or 3) ⇒ page 69  
switching on for longer than 15 seconds, the side lights and low beam are switched  
on automatically. The light switches off if the windscreen wipe is in operation rain  
sensor* for more than 4 minutes or is not switched on in the operation permanent  
wipe.  
Coming Home Function  
The function makes it possible to switch on the lights in the darkness for  
a short time after leaving the vehicle.  
WARNING  
The automatic light control only operates as a support. The driver is not  
released from his responsibility to inspect the light and if necessary to switch  
on the light depending on the light conditions. The light sensor cannot  
detect for example rain or snow. For these conditions we recommend to  
switch on the low beam !  
Switching on Coming Home Function  
–
The light switch is in the position automatic driving lamp control   
and the low beam illuminates.  
–
–
Switch off the ignition.  
After opening the driver's door, the function Coming Home is  
switched on.  
Note  
•
Do not affix any stickers in front of the light sensor, so that you do not impair its  
function or put it out of operation.  
The same principles as for using the automatic light control also apply to the  
–
Close all the doors and the boot lid and lock the vehicle. After a short  
time, switch all lights off.  
•
light which is switched on manually ⇒ page 58.  
Depending on equipment fitted the function Coming Home switches on the  
following lights:  
Cornering lights*  
•
•
•
•
Parking lights,  
Low beam,  
The cornering lights are used to illuminate the curves by means of the cone of light  
swiveling together with the front headlight with Xenon lights*. This function is  
active when the speed of the car increases to more than 10km/h.  
Entry lighting in the exterior mirrors,  
Licence plate light.  
The swiveling function of the headlights can be switched off / on via the menu point  
Assistant in the main menu of the Information display* ⇒ page 26.  
Coming Home Function  
The lights go out 10 seconds after closing all the doors and the boot lid.  
If a door or the boot lid remains open, the lights go out 60 seconds after switching  
off the ignition.  
Lights and Visibility 61  
The function Coming Home is controlled with the light sensor in the mount of the  
interior rear mirror. If the light intensity is higher than the set value of the light  
sensor, the Coming Home Function is not switched on after switching off the igni-  
tion.  
After unlocking the vehicle with the radio remote control, the lights come on for 10  
seconds. The Leaving Home Function is also switched off after the ignition is  
switched on and after locking the vehicle.  
If no door is opened within 30 seconds, the lights go out and the vehicle is locked  
automatically.  
Note  
•
If the Coming Home Function is switched on constantly, the battery will be  
heavily discharged particularly in short-haul traffic.  
The switching on of the described lights should only be undertaken in accord-  
ance with the legal requirements.  
You can change the illumination period for the Coming Home Function by  
Note  
•
If the Leaving Home Function is switched on constantly, the battery will be  
heavily discharged particularly in short-haul traffic.  
The switching on of the described lights should only be undertaken in accord-  
ance with the legal requirements.  
You can change the illumination period for the Leaving Home Function by  
•
•
•
means of the information display*.  
•
means of the information display*.  
Leaving Home Function  
Tourist light*  
This function makes it possible to switch on the lights when approaching  
the vehicle.  
This mode makes it possible to drive in countries with opposing traffic system,  
driving on the left/right, without dazzling the oncoming vehicles. When the mode  
“tourist light” is active, the side to side swivel of the headlights is deactivated.  
Switching on Leaving Home Function  
–
Unlock the vehicle with the radio remote control - the lights come on.  
The mode “tourist light” is activated / deactivated via the information display* in the  
menu:  
Depending on equipment fitted the function Leaving Home switches on the  
following lights:  
„
„
SETUP (Settings)  
Travel mode  
•
•
•
•
Parking lights,  
„
Off  
On  
Low beam,  
„
Entry lighting in the exterior mirrors,  
Licence plate light.  
Leaving Home Function  
The function Leaving Home is controlled with the light sensor in the mount of the  
interior rear mirror. If the light intensity is higher than the set value of the light  
sensor, the Leaving Home Function is not switched on after unlocking the vehicle  
with the radio remote control.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
62 Lights and Visibility  
•
the low beam is switched on or the light switch is in the position  and the  
intensity of the ambient light causes the low beam to be switched on,  
Fog lights*   
•
•
the fog lights are not switched on,  
no reverse gear is engaged.  
Note  
If you engage the reverse gear during the active function “Corner”, both fog lights  
illuminate.  
Fig. 56 Dash panel: Light  
switch  
Rear fog light   
Switching on the rear fog light  
Switching on the fog lights  
–
–
First of all turn the light switch into position or ⇒ fig. 56.  
–
–
First of all turn the light switch into position or ⇒ fig. 56.  
2
Pull the switch into position A.  
1
Pull the light switch into position A.  
The rear fog light warning light ⇒ page 31 lights up in the instrument cluster  
when the fog light is switched off.  
The rear fog light warning light ⇒ page 31 lights up in the instrument cluster  
when the fog light is switched off.  
Only the rear fog light of the trailer lights up automatically when you are towing a  
trailer using a factory-fitted towing device which is fitted with the rear fog light.  
The rear fog light is located in the rear light array on the driver's side.  
Fog lights with the function “Corner”*  
The fog lights with the function “Corner” improve the illumination of  
areas close to the vehicle when turning, parking etc.  
Caution  
The rear fog light should only be switched on if visibility is particularly poor  
(conform with any varying legal provisions) to avoid dazzling vehicles behind your  
vehicle.  
The fog lights with the function “Corner” are regulated according to the steering  
10)  
angle or after switching on the turn signal light in the following circumstances:  
•
the vehicle is stationary and the engine is running or it moves with a speed of  
maximum 40 km/h,  
•
the daylight driving lights are not switched on,  
10)  
If both switch on versions are conflicting, for example if the steering wheel is turned to the  
left and the right turn signal light is switched on, the turn signal light has the higher priority.  
Lights and Visibility 63  
Instrument lighting*   
Headlamp range adjustment   
You can adjust the brightness of the instrument lighting.  
Once the low beam is switched on you can then adapt the range of  
the headlights to the load of the vehicle.  
Fig. 57 Dash panel: Instru-  
ment lighting  
Fig. 58 Dash panel: Lights  
and Visibility  
Instrument lighting  
–
Turn the control dial ⇒ fig. 58 until you have adjusted the low beam  
so that oncoming traffic is not dazzled.  
–
–
Switch on the light.  
Turn the control dial ⇒ fig. 57 to the desired intensity of the instru-  
Settings  
ment lighting.  
The positions correspond approximately to the following vehicle loads:  
For the information display* ⇒ page 26 the intensity of the lighting is automatically  
set. It is only possible to adjust the instrument lighting with the control dial if the  
light intensity drops below the set value of the light sensor.  
-
A Front seats occupied, luggage compartment empty.  
1
A All seats occupied, luggage compartment empty.  
2
A All seats occupied, luggage compartment laden.  
3
A Driver seat occupied, luggage compartment laden.  
Caution  
Set the headlight beam adjustment in such a way as to avoid dazzling oncoming  
traffic.  
Note  
Headlights fitted with Xenon bulbs* adapt automatically to the load and driving  
state of the vehicle (e.g. accelerating, braking) when the ignition is switched on and  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
64 Lights and Visibility  
when driving. Vehicles which are equipped with Xenon bulbs* do not have a  
manual headlight range adjustment control.  
The turn signal   and main beam lever   
The parking lights and headlight flasher are also switched on and off  
using the turn signal and main beam lever.  
Switch for hazard warning lights   
Fig. 60 Turn signal and main  
beam lever  
Fig. 59 Dash panel: Switch  
for hazard warning lights  
The turn signal and main beam lever perform the following functions:  
–
Press switch ⇒ fig. 59 to switch the hazard warning light system on  
or off.  
Right and left turn signal light  
–
–
Push the lever upwards or downwards ⇒ fig. 60.  
All the turn signal lights on the vehicle flash at the same time when the hazard  
warning light system is switched on. The indicator light for the turn signals and the  
indicator light in the switch also flash at the same time. You can also switch on the  
hazard warning light system if the ignition is switched off.  
If you only wish to flash three times* (the so-called convenience turn  
signal), push the lever briefly up to the upper or lower pressure point  
and release it. This function can be activated/deactivated in the infor-  
mation display* ⇒ page 26.  
The hazard warning light system is switched on automatically if an airbag is  
deployed in the event of an accident.  
–
Turn signal for changing lanes - in order to only flash briefly, move the  
lever up or down to the pressure point and hold it in this position.  
Please comply with any legal requirements when using the hazard warning light  
system.  
Main beam   
–
–
–
Switch on the low beam.  
Push the lever forwards.  
Note  
Switch on the hazard warning light system if, for example:  
•
•
you encounter traffic congestion,  
Pull the lever back into the initial position in order to switch the main  
beam off again.  
your vehicle breaks down or an emergency situation occurs.  
Lights and Visibility 65  
Headlight flasher   
Interior lighting  
–
Pull the lever towards the steering wheel (spring-tensioned position)  
vehicle interior lighting front and rear*  
- the main beam and warning light in the instrument cluster come  
on.  
Parking light   
–
–
Switch off the ignition.  
Push the lever up or down - the right-hand or left-hand parking light  
is switched on.  
Information concerning the function of the lights.  
The turn signal system only operates when the ignition is switched on. The  
corresponding indicator light or in the instrument cluster also flashes.  
Fig. 61 Detail of the head-  
liner: Front and rear interior  
lighting  
•
•
•
The turn signal is automatically cancelled after negotiating a curve.  
The indicator light flashes at twice its normal rate if a bulb of the turn signal light  
fails.  
The same principles apply for the lighting of the front and rear part of the  
vehicle.  
•
The side light and rear light on the appropriate side of the vehicle are switched  
on when the parking light is selected. The parking light only operates if the ignition  
Switching the interior light on  
is switched off.  
A
–
Press the switch A to the left, the symbol ⇒ fig. 61 appears.  
Caution  
Switching the interior light off  
Use main beam or the headlight flasher only if this does not risk dazzling other road  
users.  
A
–
–
Press the switch A into the middle position O.  
A
On the version without reading lights press the switch A to the right,  
the symbol O appears.  
Note  
•
If you have switched on the right or left turn signal light and you switch off the  
ignition, the parking light is not automatically switched on.  
Use only in accordance with the legal requirements the described lighting and  
signal systems.  
Door contact setting  
A
–
–
Press the switch A to the right, the symbol appears.  
•
A
On the version without reading lights press the switch A into the  
middle position .  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
66 Lights and Visibility  
Reading lights*  
Front door warning light*  
B
–
Press on one of the switches A in order to switch the right or left  
reading light on or off.  
The interior light comes on as soon as you unlock the car or open a door or when  
the ignition key has been removed. The light goes out again about 30 seconds after  
all the doors have been closed. The interior lighting is switched off when you lock  
the car or switch the ignition on. This only applies when the switch for the corre-  
sponding interior lights is standing n the door contact setting.  
The interior lighting goes off after about 10 minutes when a door has been left open  
in order to avoid discharging the battery of the vehicle.  
Fig. 62 Front door: Warning  
light  
If the switch is in the position (permanent lights), the interior lighting goes off at  
the latest after 10 minutes in order to avoid discharging the battery of the vehicle.  
The warning light is located in the door trim panel below ⇒ fig. 62.  
The warning light goes on every time the door is opened. The light goes out about  
10 minutes after opening the door in order to avoid discharging the battery of the  
vehicle.  
Note  
We recommend having these bulbs replaced by a specialist garage.  
There is a reflector installed on some vehicles instead of the warning light.  
Lighting of the storage compartment on front passenger side*  
Luggage compartment light*  
–
–
When opening the flap of the storage compartment on the front  
passenger side the lighting in the storage compartment comes on.  
The lighting comes on automatically when the boot lid is opened. The luggage  
compartment lighting will switch off again automatically if the boot lid remains  
open for more than about 30 minutes.  
The light switches on automatically when the parking light is switched  
on and goes out when the flap is closed.  
Entry lighting*  
The lighting is positioned on the bottom edge of the exterior mirror.  
The light beam is directed towards the entry area of the front door.  
The light comes on after the doors have been locked or on opening the boot lid. The  
light goes out after switching on the ignition or up to 30 seconds after closing all the  
doors, the bonnet and the boot lid.  
Lights and Visibility 67  
If a door, the bonnet or the boot lid remains open, the light goes out within 2  
minutes if the ignition is switched off.  
Note  
The position and the shape of the switch can differ depending on equipment  
installed in the vehicle.  
If the on-board voltage drops, the rear window heater is switched off automat-  
•
WARNING  
•
If the entry light comes on, do not touch its cover - risk of burns!  
ically, in order to provide sufficient electrical energy for the engine control.  
Sun visors  
Visibility  
Rear window heater  
Fig. 64 Sun visor: swivelling  
out  
Fig. 63 Switch for rear  
window heater  
–
You can switch the rear window heater on or off by pressing the switch  
⇒ fig. 63 - the indicator light in the switch comes on or goes out.  
The rear window heater only operates when the engine is running.  
The rear window heater switches off automatically after 10 minutes.  
Fig. 65 Double sun visor  
For the sake of the environment  
As soon as the window is de-iced or free from mist, the heating should be switched  
off. The reduced current consumption will have a favourable effect on fuel  
economy ⇒ page 205, “Saving electricity”.  
You can pull the sun visor for the driver or front passenger out of the fixture and  
1
swivel it toward the door in the direction of the arrow A ⇒ fig. 64.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
68 Lights and Visibility  
The vanity mirrors* in the sun visors are provided with covers. Push the cover in  
2
direction of arrow A.  
On vehicles which are equipped with double sun visor*, you can also unfold the  
auxiliary visor after swivelling the sun visor⇒ page 67, fig. 65.  
WARNING  
The sun visors must not be swivelled to the side windows into the deploy-  
ment area of the head airbags if any objects, such as ball-point pens etc. are  
attached to them. This might result in injuries to the occupants if the head  
airbag is deployed.  
Fig. 67 Remove the sun  
screen  
The sun screen is located in a housing on the luggage compartment  
cover. If required, you can remove the housing with the sun screen from  
the luggage compartment cover.  
Sun screen*  
Pulling out  
A
B
–
Pull the sun screen at the loop A and hang it in the brackets A  
⇒ fig. 66.  
Folding  
B
A
–
Take the sun screen out of the brackets A and hold it at the loop A  
so that it can roll up slowly and without damage into the housing on  
the luggage compartment cover.  
Fig. 66 Unroll the sun screen  
Removing  
–
–
–
Unhook the fastening elements from the luggage compartment cover  
C
A.  
Roll up the sun screen again into the housing on the luggage compart-  
ment cover.  
1
Press the locking button in the direction of arrow A and take out the  
2
sun screen in the direction or arrow A ⇒ fig. 67.  
Lights and Visibility 69  
Fast wipe  
Position the lever up into position A.  
Windshield wiper and wash system  
3
–
Windshield wiper  
Automatic wipe/wash for windscreen  
You can operate the windscreen wipers and automatic wipe/wash  
using the windscreen wiper lever.  
5
–
Pull the lever towards the steering wheel into sprung position A, the  
wash system sprays immediately, the windscreen wiper starts wiping  
a little later. The wash system and the windscreen wiper operate  
simultaneously at a speed of more than 120 km/h.  
–
Release the lever. The windscreen wash system stops and the wiper  
continues for another 3 - 4 wiper strokes (depending on the period of  
spraying of the windscreen). At a speed of more than 2 km/h, the wiper  
wipes once again* 5 seconds after the last wiper stroke in order to  
wipe the last drops from the windscreen. This function can be acti-  
vated/deactivated by a specialist garage.  
Fig. 68 Windscreen wiper  
lever  
Rain sensor*  
1
–
–
Move the lever into position A.  
The windscreen wiper lever ⇒ fig. 68 has the following positions:  
A
You can set the sensitivity of the sensor individually with switch A.  
Finger-operated wiping  
Wiping the rear window pane*  
Push the lever away from the steering wheel into position A - the  
widescreen wiper will operate every 6 seconds.  
–
If you wish to wipe the windscreen only briefly, push the lever into the  
4
sprung position A. If you hold the lever in the lower position for more  
6
–
than 1 second, the wiper wipes faster.  
Intermittent wiping  
Automatic wipe/wash for the rear window pane*  
1
–
–
Position the lever up into position A.  
–
–
Press the lever from the steering wheel forward into the sprung posi-  
7
tion A, the wash system sprays immediately, the windscreen wiper  
A
Set with the switch Athe desired break between the individual wiper  
starts wiping a little later. As long as you hold the lever in this position,  
the wiper operates as well as the wash system.  
strokes  
Slow wipe  
Position the lever up into position A.  
Letting go of the lever will cause the windscreen wash system to stop  
and the wiper to continue for another 2 - 3 wiper strokes (depending  
on the period of spraying of the windscreen). The lever will stay in  
2
–
6
position after releasing it A.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
70 Lights and Visibility  
Switching windscreen wipers off  
WARNING  
0
–
Move the lever back into its home position A.  
•
Properly maintained windscreen wiper blades are essential for clear visi-  
bility and safe driving ⇒ page 71.  
After the windscreen wiper switches off each time or the ignition switches off for  
the third time, the position of the windscreen wiper changes, this counteracts an  
early fatigue of the wiper rubbers.  
•
Do not use the windscreen washer system at low temperatures, without  
heating the windscreen beforehand. Otherwise the window cleaner could  
freeze on the windscreen and restrict the view to the front.  
The windscreen wipers and the wash system only operate if the ignition is switched  
11)  
on and the bonnet is closed  
.
•
The rain sensor only operates as a support. The driver is not released  
from the responsibility to set the function of the windscreen wipers manu-  
ally depending on the visibility conditions.  
If the intermittent wipe is switched on, the intervals are also controlled depending  
on speed.  
The rain sensor* automatically regulates the break between the individual wiper  
strokes depending on the intensity of the rain.  
Caution  
In frosty weather, please first of all check whether the windscreen wiper blades are  
not frozen to the windscreen before switching them on. Switching on windscreen  
wipers when the blades are frozen to the windscreen may result in damage both to  
the blades and the motor of the windscreen wipers!  
The rear window will be wiped again if the front window wipers are on when  
reverse gear is selected.  
The windscreen washer nozzles are heated* when the ignition is switched on.  
Top up with wash liquid ⇒ page 236.  
Note  
Winter position  
2
3
•
If the slower A or the faster Awiper setting is switched on ⇒ page 69, fig. 68  
If the windscreen wipers are in rest position, they cannot be folded out from the  
windscreen. For this reason we recommend adjusting the windscreen wipers in  
winter so that they can be folded out from the windscreen easily. You can set this  
rest position as follows:  
and the vehicle speed decreases to below 4 km/h, the lower wiper step is switched  
on automatically. At a speed increase of more than 8 km/h the previous wiper  
setting is established again.  
•
If there is an obstacle on the windscreen, the wiper will try to push away the  
•
•
Switch on the windscreen wipers.  
obstacle. If the obstacle continues to block the wiper, the wiper stops after 5 cycles,  
in order to avoid a damage to the wiper. Remove the obstacle and and switch on  
the wiper again.  
Switch off the ignition. The windscreen wipers remain in the position in which  
they were when switching off the ignition.  
You can also use the service position ⇒ page 71 as a winter position.  
Headlight cleaning system*  
The headlights are being cleaned after the windscreen has been sprayed for the first  
time and fifth time, the low beam or main beam are switched on and the wind-  
5
screen wiper lever was held in the position A ⇒ page 69, fig. 68 for about 1  
second.  
11)  
On vehicles which do not have a contact switch for the bonnet, the windshield wiper and  
wash system operates also when the bonnet is opened.  
Lights and Visibility 71  
The headlight washer nozzles are moved forward out of the bumper by the water  
pressure for cleaning the headlights.  
Taking off the wiper blade  
–
Fold windscreen wiper arm out from the windscreen and position the  
wiper blade at right angles to the wiper arm ⇒  
You should remove stubborn dirt (such as insect residues) from the headlight  
lenses at regular intervals, for example when refuelling. Please refer to the following  
guidelines ⇒ page 214, “The headlight lenses”.  
.
–
Take off the wiper blade in direction of arrow ⇒ fig. 69 ⇒  
.
You should remove any snow from the fixtures of the washer nozzles and clear ice  
in winter with a de-icing spray in order to ensure proper operation of the cleaning  
system.  
Attaching a wiper blade  
–
Push the new wiper blade over the wiper arm and turn the wiper blade  
into the vertical position.  
–
–
Check whether the wiper blade is correctly attached.  
Replacing wiper blades for the windscreen wipers  
Fold the windscreen wiper arms onto the window and switch on the  
ignition. By pressing the window wiper lever into the sprung position  
4
A⇒ fig. 69 or when driving at a speed greater than 4 km/h, the wind-  
screen wiper arms move back into the rest position.  
Wiper blades in proper condition are essential to obtain good visibility. Wiper  
blades should not be allowed to become dirtied by dust, insect remains and  
preserving wax.  
Juddering or smearing of the wiper blades could then be due to wax residues left  
on the windscreen by vehicle washing in automatic vehicle wash systems. It is  
therefore important to degrease the lips of the wiper blades after every pass  
through an automatic vehicle wash system.  
Fig. 69 Wiper blade for the  
windscreen wiper  
One cannot fold out the wiper arms in the rest position from the wind-  
screen. Before replacing the wiper arms you must put them into the  
service position.  
WARNING  
•
The ignition must not be switched on if the front windscreen wiper arms  
are folded out. The wiper blades would move back into their rest position  
and while doing so damage the paintwork of the bonnet.  
Service position for changing wiper blades  
–
–
–
Close the bonnet.  
•
If the windscreen wipers are handled carelessly, there is a risk of damage  
to the windscreen.  
You should clean the wiper blades regularly with a windscreen cleaner in  
Switch the ignition on and then again off.  
•
4
Then press the windscreen wiper lever in the position A ⇒ page 69,  
fig. 68 within 20 seconds - the wiper arms move into the service posi-  
tion.  
order to avoid any smears. Clean a wiper blade with a sponge or cloth if it is  
very dirty, for example from insect residues.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
72 Lights and Visibility  
Rear-view mirror  
WARNING (continued)  
•
Replace the wiper blades once or twice a year for safety reasons. These  
can be bought from an authorised Škoda Service Partner.  
Manual dimming interior rear-view mirror  
Basic setting  
Replacing the wiper blade on the rear window wiper  
–
Pull the lever on the bottom edge of the mirror forward.  
Dimming mirror  
Pull the lever on the bottom edge of the mirror back.  
–
Automatic dimming interior mirror*  
Fig. 70 Wiper blade for rear  
window  
Taking off the wiper blade  
–
Fold windscreen wiper arm out from the windscreen and position the  
wiper blade at right angles to the wiper arm ⇒ fig. 70.  
Fig. 71 Automatic dimming  
interior mirror  
–
–
Hold the window wiper arm at the top end with one hand.  
A
With the other hand unlock the locking button A in the direction of  
Switching on the automatic dimming  
arrow and remove the wiper blade.  
B
A
–
Press the button A - the warning light lights up A ⇒ fig. 71.  
Attaching a wiper blade  
Switching off the automatic dimming  
–
Position the wiper blade onto the wiper arm and lock the locking  
B
A
–
Press again the button A - the warning light goes out A.  
A
button A.  
–
Check whether the wiper blade is correctly attached.  
If the automatic dimming is switched on, the mirror dims automatically  
depending on the light striking the mirror from the rear. The mirror has no lever on  
the bottom edge of the mirror. When the interior lights are switched on or the  
reverse gear is engaged, the mirror always moves back into the basic position.  
The same remarks apply here as for ⇒ page 71.  
Lights and Visibility 73  
Adjusting the right-hand exterior mirror  
Turn the rotary knob to position . The movement of the mirror  
surface is identical to the movement of the rotary knob.  
Note  
–
•
Automatic mirror dimming operates only properly if the sun screen* for the rear  
window in the housing on the luggage compartment cover is not in use or the light  
striking the interior rear-view mirror is not affected by other objects.  
Switching off operating control  
Turn the rotary knob to position .  
•
Do not affix any stickers in front of the light sensor, so that you do not impair the  
automatic dimming function or put it out of operation.  
If you switch off the automatic dimming interior rear-view mirror, also the exte-  
–
•
Folding in both exterior mirrors*  
Turn the rotary knob to position .  
rior mirror dimming is switched off.  
–
Exterior mirror  
Lowerable exterior mirror* with the aid of the key for remote control  
3
You can adjust the exterior mirrors electrically*.  
–
If all the windows are closed, press the unlock button Aon the radio  
remote control ⇒ page 50, fig. 47 for approx. 2 seconds.  
Tilting surface of front passenger exterior mirror*  
When the rotary knob is in position ⇒ fig. 72 and the reverse gear is engaged, the  
surface of the mirror tilts down slightly. This provides an aid in seeing the kerb of the  
pavement when parking the car.  
The mirror returns into its initial position, after the rotary knob is moved out of the  
position and put into another position or if the speed is more than 15 km/h.  
Memory for exterior mirrors*  
Fig. 72 Inner part of door:  
Rotary knob  
On vehicles fitted with a memory for the driver seat, the relevant setting of the exte-  
rior mirror is also stored automatically when the seat position is stored ⇒ page 76.  
The exterior mirror heater only operates when the engine is running and  
up to an outside temperature of +20 °C.  
WARNING  
•
Convex (curved outward) or spherical (differently curved) exterior  
Heating of the external mirror  
mirrors increase the vision field. They do, however, make objects appear  
smaller in the mirror. These mirrors are only of limited use, therefore, for  
estimating distances to the following vehicles.  
–
Turn the rotary knob to position ⇒ fig. 72.  
Adjusting left and right exterior mirrors simultaneously  
•
Use whenever possible the interior rear mirror, for estimating the  
distances to the following vehicles.  
–
Turn the rotary knob to position . The movement of the mirror surface  
is identical to the movement of the rotary knob.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
74 Lights and Visibility  
Note  
•
If you switch off the automatic dimming interior rear-view mirror, also the exte-  
rior mirror dimming is switched off.  
•
If the exterior mirrors are folded in using the remote control* of the vehicle key,  
these are folded back into the driving position after switching on the ignition.  
If the exterior mirrors are folded in using the rotary knob ⇒ page 73, fig. 72,  
they can only be folded back into the driving position using the rotary knob.  
If the exterior mirrors were folded in using the remote control* of the vehicle  
•
•
key and if the rotary knob was in the fold-in position before switching on the igni-  
tion, the mirrors remain in the fold-in position the next time the ignition is switched  
on. Folding back into the driving position is performed by actuating the rotary knob  
in a different position from the fold-in position.  
•
Do not touch the surfaces of the exterior mirrors if the exterior mirror heater is  
switched on.  
•
You can set the exterior mirrors by hand, if the power setting function fails at any  
time by pressing on the edge of the mirror surface.  
•
Contact your specialist garage if a fault exists with the power setting of the exte-  
rior mirrors.  
Automatic dimming exterior mirror*  
The exterior mirrors are dimmed together with the interior mirror. If the automatic  
dimming is switched on, the mirror dims automatically depending on the light  
striking the mirror from the rear.  
When the interior lights are switched on or the reverse gear is engaged, the mirror  
always moves back into the basic position (not dimmed).  
Note  
•
Automatic mirror dimming operates only properly if the sun screen* for the rear  
window is not in use or the light striking the rear of the interior rear-view mirror is  
not affected by other objects.  
•
Do not affix any stickers in front of the light sensor, so that you do not impair the  
automatic dimming function or put it out of operation.  
Seats and Stowage 75  
Seats and Stowage  
Front seats  
WARNING (continued)  
minimum distance will mean that the airbag system will not be able to prop-  
erly protect you - hazard! The front seats and the head restraints must  
always also be correctly adjusted to match the body size of the occupant.  
Basic information  
The front seats have a wide range of different settings and can thus be matched to  
the physical characteristics of the driver and front passenger. Correct adjustment of  
the seats is particularly important for:  
•
Ensure that there are no objects in the footwell as any objects may get  
behind the pedals during a driving or braking manoeuvre. You would then  
no longer be able to operate the clutch, to brake or accelerate.  
•
•
•
safely and quickly reaching the controls,  
a relaxed, fatigue-free body position,  
Adjusting the front seats  
achieving the maximum protection offered by the seat belts and the airbag  
system.  
WARNING  
•
Never transport more occupants than the maximum seating in the  
vehicle.  
•
Each occupant must correctly fasten the seat belt belonging to the seat.  
Children must be fastened ⇒ page 184, “Transporting children safely” with  
a suitable restraint system.  
•
The front seats and the head restraints must always be adjusted to match  
Fig. 73 Controls at seat  
the body size of the seat occupant as well as the seat belts must always be  
correctly fastened in order to provide an optimal protection for you and your  
occupants.  
Adjusting a seat in a forward/back direction  
•
Always keep your feet in the footwell when the vehicle is being driven -  
1
–
Pull the lever A ⇒ fig. 73 up and push the seat into the desired posi-  
never place your feet on the instrument panel, out of the window or on the  
surfaces of the seats. This is particularly important for the front seat  
passenger. You will be exposed to increased risk of injury if it becomes  
necessary to apply the brake or in the event of an accident. If an airbag is  
deployed, you may suffer fatal injuries when adopting an incorrect seated  
position!  
tion.  
1
–
Release the lever A and push the seat further until the lock is heard  
to engage.  
Adjusting height of seat*  
•
It is important for the driver and front passenger to maintain a distance  
of at least 25 cm from the steering wheel or dash panel. Not maintaining this  
2
–
Lift the seat if required by pulling or pumping lever A upwards.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
76 Seats and Stowage  
2
–
Lower the seat if required by pushing or pumping lever A down-  
Adjusting front seats electrically*  
wards.  
Adjusting seats  
Adjust the angle of the seat backrest  
–
Relieve any pressure on the seat backrest (do not lean on it) and turn  
3
the handwheel A⇒ page 75, fig. 73 to adjust the desired angle of the  
backrest.  
Adjusting lumbar support*  
4
–
Turn the wheel A until you have set the most comfortable curvature  
of the seat upholstery in the area of your spine.  
The driver's seat should be adjusted in such a way that the pedals can be pressed  
to the floor with slightly bent legs.  
Fig. 74 Side view: Controls  
for adjusting the seat  
The seat backrest on the driver's seat should be adjusted in such a way that the  
upper point of the steering wheel can be easily reached with slightly bent arms.  
WARNING  
•
•
Only adjust the driver seat when the vehicle is stationary - risk of injury!  
Take care when adjusting the seat! Adjusting the seat without care can  
lead to bruises or injuries.  
•
The seat backrests must not be angled too far back when driving other-  
wise this will affect proper operation of the seat belts and of the airbag  
system - risk of injury!  
Fig. 75 Side view: Seat  
setting switch  
Adopt the correct seated position before setting ⇒ page 75.  
Adjusting a seat in a forward/back direction  
A
1
–
Press the switch A ⇒ fig. 74 forwards or backwards A ⇒ fig. 75.  
Set the height of the seat  
A
–
Press the switch A ⇒ fig. 74 upwards or downwards.  
Seats and Stowage 77  
Adjust the angle of the seat  
Note  
A
2
–
Press the switch A at the front A ⇒ page 76, fig. 75 or at the back  
If the movement of the seat is inadvertently interrupted during an adjustment, once  
again press the switch in the appropriate direction and continue with the adjust-  
ment of the seat to the end.  
3
A ⇒ page 76, fig. 75.  
Adjusting the seat backrest  
B
–
Press the switch A ⇒ page 76, fig. 74 in the direction of the desired  
Storing setting  
setting.  
Adjusting lumbar support  
C
–
–
–
–
Press the switch A front ⇒ page 76, fig. 74 in order to enlarge the  
curvature of the lumbar support.  
C
Press the switch Arear in order to reduce the curvature of the lumbar  
support.  
C
Press the switch Atop in order to adjust the curvature of the lumbar  
support higher.  
Fig. 76 Driver seat: Memory  
buttons and SET button  
C
Press the switch A bottom in order to adjust the curvature of the  
lumbar support lower.  
Storing seat and exterior mirror settings for driving forward  
A
Switch Ais operated in order to move the seat up/down and forward/back, while  
B
–
–
–
–
–
Switch on the ignition.  
switch A is operated in order to move the seat backrest forward or back.  
Adjust the seat ⇒ page 76.  
WARNING  
Adjust both exterior mirrors ⇒ page 73.  
•
•
Only adjust the driver seat when the vehicle is stationary - risk of injury!  
Caution when adjusting the seat! You may suffer injuries or bruises as a  
result of adjusting the seat without paying proper attention.  
A
Press button SET A ⇒ fig. 76.  
B
A
Press one of the memory buttons  
the button SET - an acknowledgement signal confirms that the seat  
within 10 seconds after pressing  
•
In view of the fact that the seats can also be adjusted when the ignition is  
switched off (even when ignition key withdrawn), you should never leave  
children unattended in the vehicle.  
setting is stored.  
Storing exterior mirror setting for reversing*  
•
The seat backrests must not be angled too far back when driving other-  
wise this will affect proper operation of the seat belts and of the airbag  
system - risk of injury!  
–
–
Switch on the ignition.  
Turn the exterior mirror control to position ⇒ page 73.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
78 Seats and Stowage  
If you wish to be able to retrieve the settings which are stored in the memory by also  
using the radio remote control, you have to assign the radio remote control to a  
memory button in each case.  
–
–
–
Engage the reverse gear.  
Move the right exterior mirror into the desired position ⇒ page 73.  
Take the vehicle out of gear. The set position of the exterior mirror is  
stored.  
If you wish, you can obtain an additional remote control key from an authorised  
Škoda Service partner and then assign the remote control key to another memory  
button.  
Memory buttons  
Memory for the seat offers the possibility to store the individual driver seat and  
external mirror position. An individual position can be allocated to each of the three  
Note  
•
If the radio remote control had previously been assigned to another memory  
button, this setting is then erased by the new assignment.  
If you assign the radio remote control to a memory button which has already  
been assigned to a radio remote control, the old assignment is also replaced by a  
new assignment in this case.  
B
memory buttons A ⇒ page 77, fig. 76, that is three in total. After pressing the  
B
corresponding memory button A, the seat and the exterior mirror are automati-  
cally moved into the positions which have been allocated to this button ⇒ page 78.  
•
Emergency Off  
You can interrupt the setting operation at any time, if you operate any button of the  
driver seat.  
•
The assignment of the radio remote control to a memory button is retained,  
however, after reassigning the seats and exterior mirrors.  
Note  
Retrieving settings of the seat and mirrors  
•
When storing settings with the memory buttons, we recommend that you begin  
You can retrieve the stored settings either with the memory buttons  
or with the remote control*.  
with the front button and assign a memory button to each additional driver.  
•
•
Each new setting stored with the same button erases the previous setting.  
Each time you store the seat and exterior mirror settings for driving forward you  
Retrieving settings with memory buttons  
also have to re-store the individual setting of the exterior mirror on the passenger  
side for reversing.  
–
–
In order to retrieve the stored setting, you have two possibilities:  
One-touch automatic memory: Briefly press the desired memory  
B
button A⇒ page 77, fig. 76. The seat and exterior mirror are moved  
Assigning remote control to the memory buttons  
automatically into the stored positions (this applies only if the ignition  
is switched on and the speed is less than 5 km/h).  
After storing the settings of the seat and exterior mirrors, you have 10  
seconds in order to assign the radio remote control to the appropriate  
memory button.  
B
–
Memory keying: Press and hold the desired memory button A  
pressed long enough until the seat and the exterior mirror are moved  
into the stored positions.  
–
–
Withdraw the ignition key.  
Press the unlock button ⇒ page 50. The setting is stored with the  
memory button which you have selected.  
Seats and Stowage 79  
Retrieving settings with remote control  
Head restraints  
–
If the driver door is closed and the ignition is switched off, briefly press  
the unlock button of the radio remote control ⇒ page 50 and then  
open the driver door.  
–
The seat and exterior mirrors now move automatically into the stored  
positions.  
Retrieving setting of exterior mirror for reversing*  
–
Turn the rotary knob for the exterior mirror setting into the position   
⇒ page 73 before engaging the reverse gear.  
Fig. 77 Adjusting head  
restraint  
The mirror returns into its initial position, after the rotary knob is moved out of the  
position and put into another position or if the speed is more than 15 km/h.  
Emergency Off  
You can interrupt the setting operation at any time, if you operate any button of the  
driver seat.  
Note  
If in the stored position the inclination angle of the seat backrest is more than 102°  
in relation to the seat cushion, the seat backrest remains in this position, after  
reaching this angle, when retrieving the setting by briefly pressing the memory  
button. In order to achieve the stored setting, it is necessary to press the memory  
button again and hold it pressed until the seat is in the stored position.  
Fig. 78 Removing a head  
restraint  
Best protection is achieved if the top edge of the head restraint is at the  
same level as the upper part of your head.  
Adjusting the height of a head restraint  
–
Grasp the side of the head restraint with both hands and push it in  
upward direction as desired ⇒ fig. 77.  
–
Move the head restraint downwards if required by pressing and  
holding the safety button with one hand ⇒ fig. 78 and by pressing  
with the other hand the head restraint downwards.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
80 Seats and Stowage  
Removing and installing a head restraint  
Middle rear head restraint  
–
–
–
Pull the head restraint up out of the seat backrest as far as the stop (on  
the rear head restraints fold forward the seat backrest).  
Press the locking button in the direction of arrow ⇒ page 79, fig. 78  
and pull the head restraint out.  
To re-insert the head restraint, push it down into the seat backrest far  
enough until you hear the locking button engage.  
The position of the front and rear outer head restraints is adjustable in height. The  
middle rear head restraint is adjustable in two positions.  
Fig. 79 Rear seats: middle  
head restraint  
The head restraints must be adjusted to match the size of the seat occupant.  
Correctly adjusted head restraints together with the seat belts offer effective  
protection for the occupants ⇒ page 164, “Correct seated position”.  
IIn certain countries national legal provisions also require the equipment  
of the rear seat with fixing eyes for child seat using the “Top Tether” system  
⇒ page 191. For vehicles, which are equipped with such fixing eyes, a  
deviating sequence for removing the middle head restraint must be  
observed.  
WARNING  
•
The head restraints must be correctly adjusted in order to offer effective  
protection for the occupants in the event of an accident.  
Do not drive under any circumstance with removed head restraints - risk  
of injury!  
•
Removing and installing the rear middle head restraint  
–
–
Pull the head restraint out of the seat backrest as far as the stop.  
•
If the rear seats are occupied, the rear head restraint must not be in the  
lower position.  
A
Press the locking button in the direction of arrow A, press simultane-  
B
ously the locking button into the opening A using a flat screwdriver  
with a width of maximum 5 mm and pull out the head restraint.  
–
To re-insert the head restraint, push it down into the seat backrest far  
enough until you hear the locking button engage.  
WARNING  
•
The head restraints must be correctly adjusted in order to offer effective  
protection for the occupants in the event of an accident.  
Do not drive under any circumstance with removed head restraints - risk  
of injury!  
•
Seats and Stowage 81  
To enlarge the luggage compartment, the rear seats can be folded  
WARNING (continued)  
forwards, if necessary remove the seat cushions. The rear seats can be  
folded forward individually on vehicles with divided rear seats*.  
•
If the rear seats are occupied, the rear head restraint must not be in the  
lower position.  
Folding seats forwards  
–
Before folding the rear seats forwards, you must adapt the position of  
the front seats in such a way that they are not damaged when the rear  
seats are folded forwards.  
Rear seats  
Folding the rear seats forwards  
1
–
–
Pull up the seat cushion in direction of arrow A and fold forwards in  
2
direction of arrow A ⇒ fig. 80.  
A
Press the unlocking knob A and fold the seat backrest forwards  
⇒ fig. 81.  
If the front seats are too far back, we recommend that you have the rear head  
restraints removed before the seat backrests are folded forward. Store the removed  
head restraints in such a way that they cannot be damaged or soiled. Please refer to  
the guidelines ⇒ page 84.  
Fig. 80 Folding the seat  
cushion forwards  
Move seats into the initial position  
Fig. 81 Unlock the seat back-  
rest  
Fig. 82 Lock the seat back-  
rest  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
82 Seats and Stowage  
Move seats into the initial position  
Removing the seat cushion  
–
–
Install the head restraint in the slightly lifted seat backrest.  
C
Place the rear lateral seat belt A behind the edge of the side trim  
panel ⇒ fig. 82.  
–
Then push the seat backrest back into the upright position until the  
securing knob clicks into place - check by pulling on the seat backrest.  
B
–
–
Make sure that the red pin A is covered ⇒ page 81, fig. 81.  
Fold the seat cushion back into its original position.  
Fig. 83 Removing seat cush-  
ions  
WARNING  
•
The belts and the belt locks must be in their original position after folding  
back the seat cushions and the seat backrests - they must be ready to use.  
You can enlarge the luggage compartment on vehicles with divided rear  
seats* by removing the rear seat.  
•
The seat backrests must be securely interlocked in position so that no  
objects in the luggage compartment can slide forward if there is sudden  
braking - risk of injury!  
Removing  
–
–
Fold the seat cushion forwards completely.  
•
Pay attention that the seat backrests are correctly interlocked. It is only  
Press the wire clamps in the direction of the arrow ⇒ fig. 83 and  
then that the three-point seat belt for the middle seat can reliably fulfil its  
function.  
remove the seat cushion from its holder.  
•
Before folding the seat backrest back into the secure position, place the  
Installing  
rear lateral seat belt behind the edge of the side trim panel. Take suitable  
measures to prevent that the seat belt is jammed between the seat backrest  
and the side trim panel and is thus damaged.  
–
Press the wire clamps in the direction of the arrow and place it in its  
holder.  
–
Fold the seat cushion back into its original position.  
Caution  
For vehicles with heated rear seats* it is necessary to disconnect the plug connec-  
tion for the power supply before removing the seat cushion. For reinstalling the seat  
cushion it is necessary to re-connect the plug connection.  
Seats and Stowage 83  
Rear seat armrest*  
Fig. 86 Centre console at  
rear: Regulator for heating  
the rear seats  
Fig. 84 Rear seats: Armrest  
You can electrically heat the seat backrests and the surfaces of the front  
seats and the two outer rear seats.  
–
You can fold down the armrest at the loop to enhance occupant  
comfort ⇒ page 83, fig. 84.  
–
You can switch on and regulate the seat heating of the driver or front  
passenger seat by pressing the surface of the regulator at the point at  
which the symbol is located ⇒ fig. 85.  
Seat heaters*  
–
–
–
You can switch on and adjust the heaters of the left or right rear seats  
by pressing the regulator ⇒ fig. 86.  
With one press, you can switch the heating to highest intensity which  
is indicated by the lighting up of the three warning lights in the switch.  
With repeated pressing of the switch, the intensity of the heating is  
down-regulated up to the switch-off. The intensity of the heating is  
indicated by the number of illuminated warning lights in the switch.  
WARNING  
Fig. 85 Dash panel: Regu-  
lator for front seat heating  
If you have a subdued pain and/or temperature sensitivity, e.g. through  
medication, paralysis or because of chronic illness (e.g. diabetes), we  
recommend not to use the seat heating. This can lead to burns on the back,  
the posterior and the legs which are difficult to heal. If the seat heating is  
used, we recommend to make regular breaks in your journey when driving  
long distances, so that in specific cases as mentioned above the body can  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
84 Seats and Stowage  
WARNING (continued)  
WARNING (continued)  
recuperate from the stress of the journey. Please consult your doctor, who  
can evaluate your specific condition.  
•
There must be no objects on the floor which could roll under the pedals.  
You would then no longer be able to apply the brakes, operate the clutch or  
accelerator - risk of accident!  
Caution  
•
You should not kneel on the seats or otherwise apply pressure at specific points  
in order to avoid damaging the heating elements of the seat heaters.  
Do not use the seat heating if the seats are not occupied by persons or if objects  
luggage compartment  
•
Loading the luggage compartment  
are fastened or stored on them, for example a child seat, a bag etc. A fault of the  
heating elements in the seat heating can occur.  
Please observe the following in the interest of having good handling char-  
acteristics of your vehicle:  
•
Do not clean the seats moist ⇒ page 216.  
–
–
–
Distribute the items of luggage as evenly as possible.  
Place heavy objects as far forward as possible.  
Note  
•
The seat heating should only be switched on when the engine is running. This  
has a significant effect of saving on the battery capacity.  
Attach the items of luggage to the lashing eyes or the safety net*  
⇒ page 85.  
•
If the on-board voltage drops, the seat heating is switched off automatically, in  
order to provide sufficient electrical energy for the engine control.  
In the event of an accident, there is such a high kinetic energy which is produced by  
small and light objects that they can cause severe injuries. The magnitude of the  
kinetic energy depends on the speed at which the vehicle is travelling and on the  
weight of the object. The speed at which the vehicle is travelling is in this case the  
more significant factor.  
Pedals  
Concerning a secure depressing of the pedal, you should use only footmats from  
the Škoda genuine accessories.  
Example: In the event of a frontal collision at a speed of 50 km/h, an unsecured  
object with a weight of 4.5 kg produces an energy, which corresponds to 20 times  
its own weight. This means that it results in a weight of approx. 90 kg. You can  
imagine the injuries that can occur, if this “bullet” is flying through the interior  
compartment and hits an occupant.  
Operation of the pedals must not be hindered!  
WARNING  
•
Greater pedal distances may be needed when there is a fault in the brake  
system.  
WARNING  
•
Do not place any footmats or other additional floor coverings in the area  
•
Stow the objects in the luggage compartment and attach them to the  
lashing eyes.  
of the pedals in order to ensure that all the pedals can be fully depressed and  
are able to return unobstructed to their initial position - risk of accident!  
Seats and Stowage 85  
Lashing eyes  
WARNING (continued)  
•
Loose objects in the passenger compartment can be thrown forward  
during a sudden manoeuvre or in case of an accident and can injure the  
occupants or other oncoming traffic. This risk is still increased, if the objects  
which are flying around are hit by a deployed airbag. In this case, the objects  
which are thrown back can injure the occupants - hazard.  
•
Please note that the handling properties of your vehicle may be affected  
when transporting heavy objects as a result of the displacement of the  
centre of gravity. The speed and style of driving must be adjusted accord-  
ingly.  
Fig. 87 Luggage compart-  
ment: Lashing eyes (Octavia)  
•
The items carried in the luggage compartment should be stowed in such  
a way that no objects are able to slip forward if there are any sudden driving  
or braking manoeuvres undertaken - risk of injury!  
•
Never drive with the boot lid fully opened or slightly ajar otherwise  
exhaust gases may get into the interior of the vehicle - risk of poisoning!  
On no account exceed the permissible axle loads and the permissible  
gross weight of the vehicle - risk of accident!  
•
•
Never transport occupants in the luggage compartment!  
Caution  
Fig. 88 Luggage compart-  
ment: Lashing eyes (Combi)  
Please ensure that the heating elements of the rear window heater are not  
damaged as a result of objects sliding in this area.  
Eyes are located on the sides of the luggage compartment for lashing the goods to  
be loaded.  
Note  
Tyre pressure must be adjusted to the load ⇒ page 238.  
You can also attach a floor fixing net* to these eyes for lashing small objects.  
The floor fixing net* together with the installation instruction are stowed in a  
container under the floor covering of the luggage compartment behind the spare  
wheel.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
86 Seats and Stowage  
WARNING  
•
The load to be transported must be fixed in place in such a way that it  
cannot move during the journey and when braking.  
•
If the items of luggage or objects are attached to the lashing eyes with  
unsuitable or damaged lashing straps, injuries can occur in the event of  
braking manoeuvres or accidents. In order to prevent the items of luggage  
being thrown forward, always use suitable lashing straps which are firmly  
attached to the lashing eyes.  
Fig. 90 Fixing net: Vertical  
pocket  
Note  
Fixing examples of the fixing net as horizontal pocket ⇒ page 86, fig. 89 and vertical  
pocket ⇒ fig. 90.  
On vehicles in the version Octavia, the top front lashing eyes are located behind the  
seat backrest ⇒ fig. 87.  
The fixing net is stowed in a storage compartment behind the spare wheel under  
the floor covering of the luggage compartment.  
Fixing nets - Net programme Octavia*  
WARNING  
The whole strength of the net makes it possible to load the pocket with  
objects of up to 1,5 kg in weight. Heavy objects are not secured sufficiently -  
risk of injury and net damage!  
Caution  
Do not place any objects with sharp edges in the nets - risk of net damage.  
Fig. 89 Fixing net: Horizontal  
pocket  
Seats and Stowage 87  
Fixing nets - Net programme Combi*  
Caution  
Do not place any objects with sharp edges in the nets - risk of net damage.  
Folding double hooks* (Octavia)  
Fig. 91 Fixing net: Pocket  
Fig. 93 Luggage compart-  
ment: Folding double hooks  
Folding double hooks for attaching small items of luggage, such as bags etc. are  
provided on one or both sides of the luggage compartment depending on the  
equipment installed in the vehicle ⇒ fig. 93.  
An item of luggage weighing up to 5 kg can be attached to each side of the double  
hook.  
Fig. 92 Fixing net: Division of  
the luggage compartment  
Fixing examples of the fixing net as pocket ⇒ fig. 91 and as division of the luggage  
compartment ⇒ fig. 92.  
The fixing net is stowed in a storage compartment behind the spare wheel under  
the floor covering of the luggage compartment.  
WARNING  
The whole strength of the net makes it possible to load the pocket with  
objects of up to 1,5 kg in weight. Heavy objects are not secured sufficiently -  
risk of injury and net damage!  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
88 Seats and Stowage  
Folding hooks (Combi)  
Fig. 96 Luggage compart-  
ment: Fixing of the floor  
covering (Combi)  
Fig. 94 Luggage compart-  
ment: folding hooks  
There is a loop (Octavia) or there are hooks (Combi) located on the floor covering  
of the luggage compartment. You can fix the raised floor cover with a hook to the  
luggage compartment cover (Octavia) ⇒ page 88, fig. 95 as if one needs to reach  
the spare wheel or to the frame of the boot lid (estate car) ⇒ fig. 96.  
Folding hooks for attaching small items of luggage, such as bags etc., are provided  
on both sides of the luggage compartment ⇒ fig. 94.  
An item of luggage weighing up to 10 kg can be attached to the hook.  
Luggage net* (Octavia)  
Fixing floor covering of the luggage compartment  
Fig. 97 Luggage compart-  
ment: Luggage net  
Fig. 95 Luggage compart-  
ment: Fixing of the floor  
covering (Octavia)  
The luggage net is designed for the tranportation of lighter objects.  
Seats and Stowage 89  
WARNING  
WARNING  
•
In the storage net you must only stow objects (up to a total weight of 1.5  
kg). Heavy objects are not secured sufficiently - risk of injury!  
No objects should be placed on the luggage compartment cover, the vehicle  
occupants could be endangered if there is sudden braking or the vehicle  
collides with something.  
•
No objects with sharp edges should be stowed in the luggage net,  
because they can damage the luggage net.  
Caution  
Please ensure that the heating elements of the rear window heater are not  
damaged as a result of objects placed in this area.  
Luggage compartment cover* (Octavia)  
You can use the luggage compartment cover behind the head  
restraints for storing light and soft items.  
Note  
Opening the tailgate also lifts up the luggage compartment cover.  
Foldable luggage compartment cover (Combi)  
Fig. 98 Removing the  
luggage compartment cover  
The luggage compartment cover can be removed as required if one must  
transport bulky goods.  
Fig. 99 Luggage compart-  
ment: Foldable luggage  
compartment cover  
1
–
–
–
–
Unhook the support straps on the boot lid A ⇒ fig. 98.  
Place the cover on the side supports.  
2
Pull the cover out of the holder A horizontally to the rear.  
Install again by pushing the luggage compartment cover forwards into  
2
1
the holder A and hanging the support straps A on the boot lid.  
You can stow the removed luggage compartment cover behind the rear seat back-  
rest.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
90 Seats and Stowage  
Remove variable* loading floor  
Fig. 100 Luggage compart-  
ment: removing the foldable  
luggage compartment cover  
Fig. 101 Luggage compart-  
ment: remove variable  
loading floor  
Pulling out  
1
–
Pull the foldable luggage compartment cover in direction of arrow A  
as far as the stop into the secured position ⇒ fig. 99.  
Folding  
2
–
Press the cover in the handle area in direction of arrow A, the cover  
rolls up automatically.  
Removing  
Have the foldable luggage compartment cover removed to transport  
bulky goods by pressing the slider from the side in the direction of  
Fig. 102 Luggage compart-  
ment: Install carrier rails  
–
3
4
arrow A and removing the cover in the direction of arrow A  
⇒ fig. 100.  
The variable loading floor makes handling of bulky items of luggage  
easier. You can remove the variable loading floor if necessary.  
A
WARNING  
–
–
–
Unlock the loading floor by turning the safety eyes A to the left by  
approx. 90° ⇒ fig. 101.  
No objects should be placed on the luggage compartment cover.  
Fold together the loading floor and take it out by moving in direction  
of arrow.  
Caution  
Please ensure that the heating elements of the rear window heater and the foldable  
luggage compartment cover are not damaged as a result of objects placed in this  
area.  
B
C
Unlock the carrier rail Aby turning the arbor-mounted fixing eyes A  
to the right by approx. 90° ⇒ fig. 102.  
Seats and Stowage 91  
Net partition (Combi)*  
WARNING  
Pay attention when installing the variable loading floor that the carrier rail  
and the variable loading floor are correctly fastened. If this is not the case,  
there is risk of injury for the occupants.  
Use the net partition behind the rear seats  
Note  
The maximum load of the variable loading floor is 75°kg.  
Divide the luggage compartment with variable loading floor*  
Fig. 104 Folding down the  
storage compartment cover  
Fig. 103 Luggage compart-  
ment: Separation of the  
luggage compartment  
Fig. 105 Unrolling net parti-  
tion  
The luggage compartment can be divided with the variable loading floor.  
–
Lift up the part with the holder and secure it by sliding it into the  
grooves ⇒ fig. 103.  
Pulling out  
–
–
–
Fold down the storage compartment cover behind the rear seats  
⇒ fig. 104.  
A
B
Pull the net partition at the bracket A out of the housing A in direc-  
C
tion of the holders A ⇒ fig. 105.  
C
Insert the cross rod into one of the mounts Aand push the cross rod  
forward.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
92 Seats and Stowage  
–
–
In the same way, fix the cross rod to the other side of the vehicle,  
Use the net partition behind the front seats  
C
mount A.  
Fold the storage compartment cover downwards.  
Folding  
–
–
–
–
Fold down the storage compartment cover behind the rear seats  
⇒ fig. 104.  
Pull the cross rod back slightly, first on the one side then on the other  
C
side and take the cross rod out of the mount A ⇒ fig. 105.  
Fig. 106 Unrolling net parti-  
tion  
Hold the cross rod in such a way that the net partition can roll up  
B
slowly and without damage into housing A.  
Fold the storage compartment cover downwards.  
Pulling out  
–
–
Fold the rear seats forwards ⇒ page 81  
If you wish to use the entire luggage compartment, you can remove the luggage  
compartment cover ⇒ page 89, fig. 99.  
A
B
Pull the net partiton net at the plate A out of the housing A  
⇒ fig. 106.  
WARNING  
C
–
–
Insert the cross rod into the mount A first on the one side and push  
the cross rod forward.  
C
•
First check for yourself that the cross road is inserted into the mounts A  
in the front position!  
Pay attention that the rear seat backrest is correctly interlocked. It is only  
then that the three-point seat belt for the middle seat can reliably fulfil its  
function.  
In the same way, fix the cross rod to the other side of the vehicle,  
•
C
mount A.  
Folding  
–
–
–
Pull the cross rod back slightly, first on the one side then on the other  
C
side and take the cross rod out of the mount A ⇒ fig. 106.  
Hold the cross rod in such a way that the net partition can roll up  
B
slowly and without damage into housing A.  
Fold the rear seats back into its original position.  
Seats and Stowage 93  
Installing  
WARNING  
–
–
–
Position the net partition housing into the mounts of the rear seat  
backrests.  
•
The belt locks and the belts must be in their original position after folding  
back the seat cushions and the seat backrests - they must be ready to use.  
1
Push the net partition housing in the opposite direction of arrow A  
as far as the stop.  
•
The seat backrests must be securely interlocked in position so that no  
objects in the luggage compartment can slide forward if there is sudden  
braking - risk of injury!  
Fold the rear seats back into its original position.  
•
Pay attention that the rear seat backrest is correctly interlocked. It is only  
then that the three-point seat belt for the middle seat can reliably fulfil its  
function.  
The roof rack*  
C
•
First check for yourself that the cross road is inserted into the mounts A  
in the front position!  
Description  
Pay attention to the following points if you wish to transport luggage or other items  
on the roof of your vehicle:  
Removing and installing net partition housing  
•
A special roof luggage rack system was developed for the vehicle, that is why  
you should only use a roof luggage rack which has been released for use by Škoda  
Auto.  
•
The base carrier is the basis for a complete roof luggage rack system. Separate  
additional holders are required for safety reasons for transporting luggage, bikes,  
surfboards, skis and boats.  
•
The basic version of the roof luggage rack system and further components are  
obtainable as accessories from the authorised Škoda Service Partners.  
Fig. 107 Rear seats: Net  
partition housing  
Caution  
•
If you use other roof rack systems or if the roof bars are not properly fitted, then  
any damage which may result to your car is not covered by the warranty agree-  
ments. It is therefore essential to pay attention to the fitting instructions supplied  
with the roof luggage rack system.  
Removing  
–
–
–
Fold the rear seats forwards ⇒ page 81  
Open the right rear door.  
• On models fitted with a power sliding/tilting roof, ensure that the opened  
sliding/tilting roof does not strike any items of luggage transported on the roof.  
Ensure that the opened boot lid does not collide with the roof load.  
A
Push the net partition housing A⇒ fig. 107 in the direction of arrow  
•
1
A and take it out of the mounts of the rear seats in the direction of  
2
arrow A.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
94 Seats and Stowage  
Roof load  
For the sake of the environment  
The increased aerodynamic drag results in a higher fuel consumption. One should  
therefore take off the roof bar system after use.  
Distribute weight evenly over the roof luggage rack system. The maximum permis-  
sible roof load (including roof rack system) of 75 kg and the maximum permissible  
total weight of the vehicle should not be exceeded.  
You cannot make full use of the permissible roof load if you use a roof luggage rack  
system with a lower load carrying capacity. The load transported on the roof  
luggage rack system must not exceed the weight limit which is stated in the fitting  
instructions.  
Note  
A roof rail is obtainable from a specialist garage if hasn't been fitted onto an estate  
car at the works, which carries out the professional fitting.  
Lashing points (Octavia)  
WARNING  
•
The items which you transport on the roof bar system must be reliably  
attached - risk of accident!  
You must on no account exceed the permissible roof load, the permis-  
•
sible axle loads and the permissible gross weight of your vehicle - risk of  
accident!  
•
Please note that the handling properties of your vehicle change when  
you transport heavy or bulky items on the roof bar system as a result of the  
displacement of the centre of gravity and the increased wind attack area -  
risk of accident! You must absolutely adapt your style of driving and the  
speed of the vehicle to the specific circumstances.  
Fig. 108 Attachment points  
for base roof carrier  
Perform the assembly and the disassembly according to the attached instructions.  
Note  
•
•
If you have any questions, please contact a specialist garage.  
The figure is not valid for an estate car.  
Seats and Stowage 95  
Cup holder in rear centre console*  
Cup holder  
Cup holder in front centre console  
Fig. 110 Centre console at  
rear: Cup holder  
Fig. 109 Front centre  
console: Cup holder  
A
–
Press on the panel in the area A ⇒ fig. 110 - the cup holder comes  
out.  
You can place two cups or beverage cans into the recesses ⇒ fig. 109.  
–
–
Pull the cup holder out as far as the stop.  
B
Adjust the cup holder by moving the locking plate A.  
WARNING  
•
Do not place any hot beverages into the cup holder. If the vehicle moves,  
the hot beverages may spill - risk of scalding!  
Do not use any cups or beakers which are made of brittle material (e.g.  
WARNING  
•
Do not place any hot beverages into the cup holder while the car is  
•
moving. The hot beverages may spill - risk of scalding!  
Do not use any cups or beakers which are made of brittle material (e.g.  
glass, porcelain). You might be injured by them in the event of an accident.  
glass, porcelain). You might be injured by them in the event of an accident.  
•
Caution  
Do not open the beverages in the cup holder while driving. They may spill when  
braking and while doing so damage the vehicle.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
96 Seats and Stowage  
Note holder  
Fig. 113 Remove front  
ashtray insert  
Fig. 111 Windscreen: Note  
holder  
Opening ashtray  
A
–
Press on the bottom part of the cover of the ashtray - refer to A  
The note holder is designed e.g. for attaching a car park ticket in parking areas.  
⇒ page 96, fig. 112.  
The attached note has to always be removed before starting off in order not to  
restrict the driver's vision.  
Removing ashtray insert  
Press on the ashtray insert in the area A⇒ fig. 113 (the insert comes  
out) and take it out.  
B
–
Ashtray*  
Insert ashtray insert  
Front ashtray  
–
Insert the ashtray insert into the mount and press it in.  
WARNING  
Never lay flammable objects in the ashtray basin - risk of fire!  
Fig. 112 Centre console:  
Front ashtray  
Seats and Stowage 97  
Rear ashtray - low centre console  
Rear ashtray - high centre console*  
Fig. 114 Low centre console:  
Rear ashtray  
Fig. 115 High centre console:  
Rear ashtray  
Opening ashtray  
Grasp the ashtray cover at the lower edge A and fold it open in the  
direction of arrow ⇒ fig. 114.  
Opening ashtray  
A
A
–
–
Press on the top part of the cover of the ashtray in area A ⇒ fig. 115.  
Removing ashtray insert  
Removing ashtray  
Grasp the ashtray at the handle Aand pull it out in an upward direc-  
tion.  
–
–
Press the cover of the ashtray down slightly as far as the stop.  
B
–
B
Grasp the ashtray insert at the cover A and pull it out.  
Insert ashtray insert  
Insert the ashtray insert into the mount and press it in.  
Replacing ashtray  
–
–
Insert the ashtray into the console and press it in.  
There is a beverage holder attached to the inner side of the ashtray cover.  
WARNING  
WARNING  
Never lay flammable objects in the ashtray basin - risk of fire!  
Never lay flammable objects in the ashtray basin - risk of fire!  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
98 Seats and Stowage  
Cigarette lighter*, power sockets  
WARNING  
•
Take care when using the cigarette lighter! Not paying proper attention  
or incorrect use the cigarette lighter in an uncontrolled manner may result in  
burns.  
Cigarette lighter  
You can also use the socket on the cigarette lighter for other elec-  
trical appliances.  
•
The cigarette lighter and the power socket also operates when the igni-  
tion is switched off or the ignition key withdrawn. You should therefore  
never leave children unattended in the vehicle.  
Caution  
Always use matching plugs to avoid damaging the power socket.  
Note  
•
Connecting electrical components when the engine is not running will  
drain the battery of the vehicle - risk of battery draining!  
Further information ⇒ page 244, “Accessories, changes and replacement of  
Fig. 116 Centre console:  
Cigarette lighter  
•
parts”.  
Using the cigarette lighter  
–
–
–
–
Press in the button of the cigarette lighter ⇒ fig. 116.  
Wait until the button jumps forward.  
Power socket in the luggage compartment (Combi)  
Remove the cigarette lighter immediately and use it.  
Insert the cigarette lighter again into the socket.  
Using the socket  
–
–
Remove the cigarette lighter or the cover of the power socket.  
Connect the plug of the electrical appliance to the socket.  
The 12 volt power socket can also be used to supply power to electrical accessories  
with a power uptake up to 180 watts.  
Fig. 117 Luggage compart-  
ment: Power socket  
–
Open the cover of the power socket ⇒ fig. 117.  
Seats and Stowage 99  
–
Connect the plug of the electrical appliance to the socket.  
Side compartment*  
⇒ page 106  
⇒ page 107  
⇒ page 107  
Storage compartment behind the rear seats* (Combi)  
Clothes hooks*  
You can only use the power socket for the connection of approved electrical acces-  
sories with a power uptake up to 180 watts. The vehicle battery will be discharged  
in the process if the engine is stationary.  
The same remarks apply here as for ⇒ page 98.  
WARNING  
Further information ⇒ page 244, “Accessories, changes and replacement of  
•
Please do not place anything on top of the dash panel. Such objects  
parts”.  
might slide or fall down when driving (when accelerating or cornering) and  
may distract you from concentrating on the traffic situation - risk of acci-  
dent!  
Storage compartments  
•
Ensure that when driving no objects from the centre console of from  
other storage possibilities may get into the footwell of the driver. You would  
then no longer be able to apply the brakes, operate the clutch or accelerator  
- risk of accident!  
Overview  
You will find the following storage facilities in your vehicle:  
Storage compartment on the front passenger side  
Storage compartment on the front passenger side  
Storage compartment on the driver's side  
Storage compartment on the dash panel*  
Storage compartment in front centre console*  
Storage compartment for spectacles*  
⇒ page 99  
⇒ page 100  
⇒ page 101  
⇒ page 101  
⇒ page 102  
⇒ page 102  
⇒ page 103  
⇒ page 103  
⇒ page 104  
⇒ page 104  
⇒ page 105  
⇒ page 105  
Storage compartment in the front doors  
Storage compartment below front passenger seat*  
Front seat armrest with storage compartment*  
Rear armrest with storage compartment*  
Storage compartment in rear centre console*  
Seat backrest with opening for skis*  
Fig. 118 Dash panel: Storage  
compartment on the front  
passenger side  
Opening and closing the storage compartment on the front  
passenger side  
Through-loading bag*  
–
–
Press the handle of the lid ⇒ fig. 118 - the lid folds down.  
Raise the lid and press it until the catch is heard to engage.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
100 Seats and Stowage  
There is a holder for a pen and note book on the inside of the lid.  
We recommend that you close the air supply if it is operating in the heating mode  
or if you are not using the cooling system for the storage compartment.  
WARNING  
Storage compartment on the driver's side  
•
The storage compartment must always be closed when driving for safety  
reasons.  
•
Do not place any beverages into the cup holder while driving. Spilled  
beverages can damage the electrical system and the upholstery. Hot bever-  
ages may result in burns.  
Cooling of storage compartment on front passenger  
side*  
Fig. 120 Dash panel: Storage  
compartment on the driver's  
side  
The storage compartment is for vehicles fitted with an air-condi-  
tioning system with a closable air supply.  
–
The storage compartment is opened by lifting the handle and folding  
open in the direction of arrow ⇒ fig. 120.  
WARNING  
The storage compartment must always be closed when driving for safety  
reasons.  
Fig. 119 Storage compart-  
ment: Using cooling system  
–
Open or close the air supply using the control dial ⇒ fig. 119.  
Opening the air supply when the air conditioning system is switched on allows  
cooled air to flow into the storage compartment.  
Opening the air inlet when the air conditioning system is on causes fresh or interior  
air to flow into the storage compartment.  
Seats and Stowage 101  
Storage compartment on the dash panel*  
Storage compartment in front centre console*  
Fig. 122 Front centre  
console: Storage compart-  
ment  
Fig. 121 Dash panel: Storage  
compartment  
A
–
Press in the middle of the storage compartment ⇒ fig. 121 - the lid  
folds open  
–
Press on the bottom part of the storage compartment in the area A  
⇒ fig. 122 - the lid opens.  
Certain model versions are equipped without lid for the storage compartment.  
WARNING  
The storage compartment is not a substitute for the ashtray and must also  
not be used for such purposes - risk of fire!  
WARNING  
•
The storage compartment is not a substitute for the ashtray and must  
also not be used for such purposes - risk of fire!  
The pull-out storage compartment must always be kept closed when  
driving for safety reasons.  
Do not put any highly inflammable objects or objects which are sensitive  
•
Storage net on the front centre console*  
•
to heat (e.g. lighters, sprays, spectacles, carbonated drinks) in the storage  
compartment.  
Fig. 123 Front centre  
console: Storage net  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
102 Seats and Stowage  
The storage net in the front center console ⇒ fig. 123 is designed for the transport  
of smaller objects.  
Storage compartment in the front doors  
WARNING  
•
In the storage net you must only stow objects (up to a total weight of 0.5  
kg). Heavy objects are not secured sufficiently - risk of injury!  
No objects with sharp edges should be stowed in the luggage net,  
•
because they can damage the luggage net.  
Fig. 125 Storage compart-  
ment in the front doors  
Storage compartment for spectacles*  
B
A bottle holder is located in the area A of the storage compartment for the front  
doors.  
WARNING  
A
Use the area A⇒ fig. 125 of the storage compartment only for storing  
objects which do not project so that the effectiveness of the side airbag is not  
impaired.  
Fig. 124 Detail of the head-  
liner: Storage compartment  
for spectacles  
–
Press on the lid of the storage compartment, the storage compart-  
ment opens downwards ⇒ fig. 124.  
WARNING  
The compartment must only be opened when removing or inserting objects  
and otherwise must be kept closed.  
Seats and Stowage 103  
Storage compartment below front passenger seat*  
Fig. 128 Armrest: Cooling of  
storage compartment  
Fig. 126 Front passenger  
seat: Storage compartment  
The armrest is adjustable for height and length.  
Opening storage compartment  
The storage compartment is foreseen for storing small objects of up to 1.5  
kg. in weight.  
–
Open the lid of the armrest in the direction of arrow ⇒ page 103,  
fig. 127.  
–
–
Tilt the lock to open the flap and pull out the flap ⇒ fig. 126.  
Closing storage compartment  
Open the lid up to the stop, then you can fold it downwards.  
Tilt the lock to close the flap and press flap close.  
–
Front seat armrest with storage compartment*  
Setting height  
–
First of all fold the lid to the bottom and lift it in the direction of arrow  
into one of the 4 fixed positions.  
Adjusting in forward/back direction  
Push the lid into the desired position.  
–
Opening air inlet  
A
–
Pull the lock A in upward direction ⇒ fig. 128.  
Fig. 127 Armrest: Storage  
compartment  
Closing air inlet  
A
–
Push the lock A as far as the stop downwards.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
104 Seats and Stowage  
On vehicles fitted with air conditioning, the storage compartment is equipped with  
a lockable inlet for thermally treated (warmed-up) air.  
Storage compartment in rear centre console*  
At open air supply, air flows into the storage with a temperature which is as high as  
the one out of the air outlet nozzles, depending on temperature setting.  
The air inlet in the storage compartment is connected to position through  
adjustment of the control dial for air distribution. This position causes the  
maximum amount of air to flow into the storage compartment (depending on the  
rotary regulator position for the fan).  
You can use the storage compartment, for example, to temper drinks cans, etc.  
If you do not use the air inlet in the storage compartment, the end cover  
should always be kept closed.  
Fig. 130 Centre console at  
rear: Storage compartment  
Note  
The storage compartment is equipped with a removeable insert.  
Push the lid of the armrest up to stop to the rear before operating the handbrake.  
–
Open the storage compartment by pulling on the upper edge of the  
A
storage compartment A in the direction of arrow ⇒ fig. 130.  
Rear seat armrest with storage compartment*  
WARNING  
The storage compartment is not a substitute for the ashtray and must also  
not be used for such purposes - risk of fire!  
Fig. 129 Armrest of rear  
seats:  
A storage compartment* is located in the armrest. You open the compartment by  
pressing the button on the front side and raising the cover ⇒ fig. 129.  
Seats and Stowage 105  
Opening from luggage compartment  
Seat backrest with opening for skis*  
A
–
Push the unlock button Adownwards ⇒ page 105, fig. 132 and fold  
the lid (with armrest) to the front.  
Closing  
Fold the lid and the armrest up to the stop in upward direction - the lid  
must click into place audibly.  
–
Ensure that the armrest is always locked into place after closing. You can recognize  
A
this on the fact that the red field above the unlocking button A of the luggage  
compartment is not visible.  
Fig. 131 Rear seats: Handle  
of lid  
Through-loading bag (Unibag)*  
Fig. 132 Luggage compart-  
ment: Unlock button  
Fig. 133 Luggage compart-  
ment: Unlock button  
After folding open the armrest and the lid, an opening in the seat backrest  
becomes visible through which you can push long objects e.g. skis etc.  
You can fold open the armrest and the lid from the passenger or luggage  
compartment.  
Opening from passenger compartment  
–
–
Fold down the armrest of the rear seat at the loop ⇒ page 83.  
Pull the handle up to the stop in upward direction and fold open the  
lid downwards ⇒ fig. 131.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
106 Seats and Stowage  
–
Carefully fold the empty (dry) through-loading bag together, place it in  
the luggage compartment and secure it to prevent it slipping.  
WARNING  
•
After placing items into the through-loading bag, you must secure the  
A
bag with the securing belt A.  
•
•
The securing belt must hold the items tight.  
Fig. 134 Attaching through-  
loading bag to middle seat  
belt buckle of rear seats  
Ensure that the securing belt on ski sport articles lies in the middle  
between the bindings (see imprint on the through-loading bag).  
Loading  
Note  
–
–
Open the boot lid.  
•
Place the skis with the tips facing the front, snowboards and ski sticks with the  
tips facing the rear into the through-loading bag.  
A
Push the unlock button A downwards ⇒ fig. 133 and fold the lid  
(with armrest) to the front.  
•
If there are several pairs of skis in the through-loading bag, ensure that the bind-  
ings are positioned at the same height.  
The through-loading bag must never be folded together or stowed when  
–
–
Place the empty through-loading bag in such a way that the end of the  
bag with the zip lies in the boot.  
•
moist.  
Push the objects into the through-loading bag from the boot ⇒  
.
Side compartment*  
Securing  
A
–
–
–
Insert the securing belt of the through-loading bag Ainto the middle  
C
seat belt buckle A ⇒ fig. 134.  
Place the securing belt on ski sport articles in the middle between the  
bindings ⇒  
.
B
Pull the securing belt tight at the free end of the belt A.  
Stowing  
Fold the lid and the armrest up to the stop in upward direction - the lid  
–
Fig. 135 Luggage compart-  
ment: Side compartment  
must click into place audibly. You can recognise if the cover is correctly  
A
closed on the fact that the red field above the unlocking button A of  
the luggage compartment is not visible ⇒ fig. 133.  
Seats and Stowage 107  
–
You can open the compartment by turning the locks in the direction of  
arrow.  
WARNING (continued)  
could be thrown out of the compartment - risk of injuries! For this reason,  
the front part of the luggage compartment cover must always cover over the  
stowage compartment.  
The CD changer* is housed in this compartment.  
Storage compartment behind the rear seats*  
(Combi)  
Clothes hooks*  
The clothes hooks are located on the middle pillar and on the handle of the head-  
liner above each of the rear doors.  
WARNING  
•
Ensure that any clothes hanging from the hooks do not impair your  
vision to the rear.  
Use the hooks for hanging only light items of clothing and ensure that  
there are no heavy or sharp-edged objects in the pockets.  
•
Fig. 136 Removing the  
stowage compartment  
•
•
The maximum permissable load of the hooks is 2 kg.  
Do not use clothes hangers for hanging up items of clothing otherwise  
this will interfere with the protection offered by the head airbag*.  
Removing  
–
–
First remove the foldable luggage compartment cover ⇒ page 89.  
Grasp the housing with both hands and remove it by pulling in direc-  
tion of arrow ⇒ fig. 136.  
Installing  
–
–
Push the housing up to the stop into the catch.  
Re-insert the foldable luggage compartment cover.  
WARNING  
Only place small and light objects up to a total weight of 3 kg into the  
stowage compartment. In the event of a vehicle collision heavy objects  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
108 Heating and air conditioning system  
Heating and air conditioning system  
Close air outlet vents  
Turn the vertical thumbwheel into the end position.  
Air outlet vents  
–
The information provided is valid for all vehicles.  
Redirecting air flow  
–
Swivel upward or downward the grille of the vents in order to change  
the direction of the air flow using the vertically arranged thumbwheel.  
–
Turn the horizontal thumbwheel on the vent to the right or left in order  
to change the air flow to the appropriate side.  
The air outlet vents 3, 4 ⇒ fig. 137 and 6 ⇒ fig. 138 can be closed and opened indi-  
vidually.  
The air outlet vents 6 are only fitted on vehicles with higher centre console.  
Warmed, unwarmed or cooled air will flow out of the air outlet vents according to  
the setting of the regulator of the heating or the air conditioning system* and the  
atmospheric conditions.  
Fig. 137 Air vents at the front  
Note  
The air outlet vents 2 ensure in the ventilation and cooling mode for a comfortable  
(no-draught) ventilation of the interior of the vehicle, also if the air outlet vents 4  
are closed.  
Fig. 138 Air vents at the rear  
Open air outlet vents  
–
Turn the vertical thumbwheel (not when in the end position).  
Heating and air conditioning system 109  
1
–
Pressing button A causes the recirculating air system ⇒  
to be  
Heating  
switched on.  
Using the system  
Control for air distribution  
The heating system delivers air into the interior of the vehicle and  
warms it as required.  
–
You can adjust the direction of the air flow using the air distribution  
C
control A ⇒ page 108.  
Rear window heater  
2
–
Press button A. Further information ⇒ page 67, “Rear window  
heater”.  
Auxiliary heating (auxiliary heating)*  
3
–
Press the button A in order to directly switch on/off the auxiliary  
heating (auxiliary heating and ventilation). Further information  
⇒ page 119, “Auxiliary heating (auxiliary heating and ventilation)*”.  
The air inlet in front of the windscreen must be free of ice, snow or leaves in order  
to ensure that the heating and ventilation systems operate properly.  
Fig. 139 Heating: Control elements  
The heating effect is dependent upon the coolant temperature, thus full heat  
output only occurs when the engine has reached its operating temperature.  
Setting temperature  
The blower should aways be on to prevent the windows from misting up.  
A
–
Turn the control dial A⇒ fig. 139 to the right in order to increase the  
temperature.  
WARNING  
A
–
Turn the control dial A to the left in order to increase the tempera-  
You should not leave recirculated air mode on over a longer period of time,  
as “stale” air may result in fatigue in the driver and occupants, divert your  
attention and also cause the windows to mist up. The risk of having an acci-  
dent increases. Switch recirculated air mode off as soon as the windows  
begin misting up.  
ture.  
Controlling blower  
B
–
Turn the blower switch Ainto one of the positions, 1 to 4, in order to  
switch the blower on.  
B
–
Turn the blower switch Ainto position 0 in order to switch the blower  
Note  
off.  
•
The whole heat output will be needed to unfrost the windscreen and side  
windows. No warm air will be fed to the footwell. This can lead to restriction of the  
heating comfort.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
110 Heating and air conditioning system  
The used air streams out through the air removal openings in the luggage  
•
compartment.  
Set heating  
Recommended settings of heating controls for:  
Setting of the control dial  
Set-up  
Air outlet vents 3  
Air outlet vents 4  
1
Button A  
A
A
B
A
C
A
Defrosting the windscreen and  
side windows  
up to the stop  
towards the right  
open and align with the side  
window  
3
do not switch on  
do not switch on  
briefly switched on  
do not switch on  
do not switch on  
close  
close  
open  
close  
open  
  
Free windscreen and side win- desired tempera-  
dows from mist  
open and align with the side  
window  
2 or 3  
ture  
up to the stop  
towards the right  
the fastest heating  
3
open  
open  
open  
desired tempera-  
ture  
comfortable heating  
2 or 3  
up to the stop  
towards the left  
Fresh air mode - ventilation  
desired position  
Heating and air conditioning system 111  
Recirculated air mode  
Climatic* (semi-automatic air conditioning system)  
In recirculated air mode air is sucked out of the interior of the vehicle  
and then fed back into the interior.  
Description  
The Climatic is a combined cooling and heating system. It makes it  
possible to optimally control the air temperature at any season of the  
year.  
Recirculated air mode prevents polluted air outside the vehicle from  
getting into the vehicle, for example when driving through a tunnel or  
when standing in a traffic jam.  
Description of the Climatic  
Switching recirculated air mode on  
It is important for your safety and for your driving comfort that the Climatic is oper-  
ating properly.  
–
Press the button  
- the warning light lights up in the button  
⇒ page 109, fig. 139.  
AC  
1
The cooling only operates if button  
following conditions are met:  
⇒ page 112, fig. 140 Ais pressed, and the  
Switching recirculated air mode off  
•
•
•
engine running,  
–
Press again the button  
- the warning light in the button goes out.  
outside temperature above approx. +2°C and  
blower switch switched on (positions 1 to 4).  
The recirculated air mode is switched off automatically if the air distribution control  
Ais in position ⇒ page 109, fig. 139. You can also switch recirculated air mode  
on again from this setting by repeatedly pressing button  
C
If the cooling system is switched on, the temperature and air humidity drops in the  
vehicle. The wellbeing of the occupants of the car is enhanced as a result of this  
particularly at high outside temperatures and a high air humidity. The system  
prevents the windows misting up during the cold season of the year.  
.
WARNING  
The heating effect is dependent upon the coolant temperature, thus full heat  
output only occurs when the engine has reached its operating temperature.  
You should not leave recirculated air mode on over a longer period of time,  
as “stale” air may result in fatigue in the driver and occupants, divert your  
attention and also cause the windows to mist up. The risk of having an acci-  
dent increases. Switch recirculated air mode off as soon as the windows  
begin misting up.  
It is possible to briefly activate recirculated air mode in order to enhance the  
cooling effect ⇒  
.
Air at a temperature of about 5°C may flow out of the vents under certain circum-  
stances when the cooling system is operating. Lengthy and uneven distribution of  
the air flow out of the vents and large differences in temperature, for example when  
getting out of the vehicle, can result in chills in sensitive persons.  
The air inlet in front of the windscreen must be free of ice, snow or leaves in order  
to ensure that the heating and cooling systems operate properly.  
After switching on the cooling Condensation from the evaporator of the air condi-  
tioning may drip down and form a puddle below the vehicle. This is quite normal  
and not an indication of a leak!  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
112 Heating and air conditioning system  
WARNING  
Using the system  
•
For your own safety and that of other road users, ensure that all the  
windows are free of ice, snow and misting. Please familiarize yourself about  
how to correctly operate the heating and ventilation systems, how to demist  
and defrost the windows, as well as with the cooling mode.  
•
You should not leave recirculated air mode on over a longer period of  
time, as “stale” air may result in fatigue in the driver and occupants, divert  
your attention and also cause the windows to mist up. The risk of having an  
accident increases. Switch recirculated air mode off as soon as the windows  
begin misting up.  
Note  
•
We recommend that you do not smoke in the vehicle when the recirculating air  
mode is operating since the smoke which is drawn at the evaporator from the inte-  
rior of the vehicle forms deposits in the evaporator of the air conditioning system.  
This produces a permanent odour when the air conditioning system is operating  
which can only be eliminated through considerable effort and expense (replace-  
ment of compressor).  
Fig. 140 Climatic: Control elements  
Setting temperature  
A
–
Turn the control dial A⇒ fig. 140 to the right in order to increase the  
temperature.  
A
–
Turn the control dial A to the left in order to increase the tempera-  
ture.  
Controlling blower  
B
–
–
–
Turn the blower switch Ainto one of the positions, 1 to 4, in order to  
switch the blower on.  
B
Turn the blower switch Ainto position 0 in order to switch the blower  
off.  
4
Pressing button  
A - causes the recirculating air system  
⇒ page 114 to be switched on.  
Control for air distribution  
–
You can adjust the direction of the air flow using the air distribution  
C
control A ⇒ page 108.  
Heating and air conditioning system 113  
The set temperature will be automatically maintained other than when the  
control dial is on the extreme right or extreme left position:  
switching cooling on and off  
AC  
1
–
Press the button  
up in the button.  
A⇒ page 112, fig. 140. The warning light lights  
•
•
•
Extreme right position - full heating,  
Extreme left position - full cooling,  
AC  
–
When you again press the switch  
, the cooling system is switched  
The blower should aways be on to prevent the windows from misting up.  
off. The warning light in the button goes out.  
Rear window heater  
Note  
•
The whole heat output will be needed to unfrost the windscreen and side  
windows. No warm air will be fed to the footwell. This can lead to restriction of the  
heating comfort.  
2
–
Press button  
heater”.  
A. Further information ⇒ page 67, “Rear window  
•
The used air streams out through the air removal openings in the luggage  
compartment.  
Auxiliary heating (auxiliary heating)  
3
–
Press the button  
A in order to directly switch on/off the auxiliary  
•
If the cooling system has not been switched on for a lengthy period, odours may  
heating (auxiliary heating and ventilation. Further information  
be produced at the evaporator because of deposits. Switch the cooling system on  
at least once a month for approximately 5 minutes at the highest blower stage - also  
during the cold season of the year - in order to remove such odours. Also open a  
window for a short time.  
⇒ page 119, “Auxiliary heating (auxiliary heating and ventilation)*”.  
•
Please refer to the information regarding recirculated air mode ⇒ page 114.  
Set Climatic  
Recommended settings of Climatic controls for the respective operating modes:  
Setting of the control dial  
Set-up  
Button  
Air outlet vents 3  
A
A
B
A
C
A
1
A
4
A
Defrosting the windscreen and  
side windows  
recommended  
22°C  
open and align with the side  
window  
3
2
2
switched off  
switched on  
switched off  
do not switch on  
do not switch on  
briefly switched on  
Free windscreen and side win-  
dows from mist  
desired tempera-  
ture  
open and align with the side  
window  
recommended  
22°C  
the fastest heating  
open  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
114 Heating and air conditioning system  
Set-up  
Setting of the control dial  
Button  
Air outlet vents 3  
A
A
B
A
C
A
1
A
4
A
desired tempera-  
ture  
comfortable heating  
the fastest cooling  
2 or 3  
switched off  
switched on  
switched on  
switched off  
do not switch on  
briefly switched on  
do not switch on  
do not switch on  
open  
  
recommended  
22°C  
briefly 4, then  
2 or 3  
open  
open and align to the roof  
open  
desired tempera-  
ture  
optimal cooling  
1, 2 or 3  
up to the stop  
towards the left  
Fresh air mode - ventilation  
desired position  
Recirculated air mode  
WARNING  
In recirculated air mode air is sucked out of the interior of the vehicle  
and then fed back into the interior.  
You should not leave recirculated air mode on over a longer period of time,  
as “stale” air may result in fatigue in the driver and occupants, divert your  
attention and also cause the windows to mist up. The risk of having an acci-  
dent increases. Switch recirculated air mode off as soon as the windows  
begin misting up.  
Recirculated air mode prevents polluted air outside the vehicle from  
getting into the vehicle, for example when driving through a tunnel or  
when standing in a traffic jam.  
Switching recirculated air mode on  
Using the air conditioning system economically  
4
–
Press the button  
up in the button.  
A ⇒ page 112, fig. 140 the warning light lights  
The compressor on the air conditioning system uses power from the engine when  
in cooling mode which will effect the fuel consumption.  
Switching recirculated air mode off  
It recommended to open the windows or the doors of a vehicle for which the inte-  
rior has been strongly heated through the effect of direct sunlight in order to allow  
the heated air to escape.  
–
Press again the button  
- the warning light in the button goes out.  
The recirculated air mode is switched off automatically if the air distribution control  
The cooling system should not be switched on while travelling when the window is  
open.  
C
Ais in position ⇒ page 112, fig. 140. You can also switch recirculated air mode  
on again from this setting by repeatedly pressing button  
.
The desired interior temperature can also be achieved without switching in the  
cooling system just by switching to fresh air mode.  
Heating and air conditioning system 115  
AC  
•
switched on.  
For the sake of the environment  
When you economize on fuel, you also reduce pollutant emissions.  
If the cooling system is switched on, the temperature and air humidity drops in the  
vehicle. The wellbeing of the occupants of the car is enhanced as a result of this  
particularly at high outside temperatures and a high air humidity. The system  
prevents the windows misting up during the cold season of the year.  
Operational problems  
The heating effect is dependent upon the coolant temperature, thus full heat  
output only occurs when the engine has reached its operating temperature.  
If the cooling system does not operate at outside temperatures higher than +5 °C,  
there is a problem in the system. The reasons for this may be:  
It is possible to briefly activate recirculated air mode in order to enhance the  
cooling effect ⇒ page 118.  
•
The fuse on the air conditioning system has blown. Check the fuse, replace it if  
necessary ⇒ page 258.  
The cooling system has switched off automatically for a short time because the  
The air inlet in front of the windscreen must be free of ice, snow or leaves in order  
to ensure that the heating and cooling systems operate properly.  
•
coolant temperature of the engine is too hot ⇒ page 18.  
The AC compressor is switched off at a high coolant temperature in order to provide  
cooling at a high load of the engine.  
If you are not able to rectify the operational problem yourself, or if the cooling  
capacity decreases, switch the cooling system off. Contact a specialist garage.  
After switching on the cooling Condensation from the evaporator of the air condi-  
tioning may drip down and form a puddle below the vehicle. This is quite normal  
and not an indication of a leak!  
Climatronic* (automatic air conditioning)  
Recommended setting for all periods of the year:  
•
•
•
Set the desired temperature, we recommend 22 °C.  
AUTO  
Description  
Press the button  
⇒ page 116, fig. 141.  
The Climatronic system is a combination of an automatic heating,  
fresh air and cooling system which provides optimal comfort for the  
occupants of the car.  
Move the air outlet vents 3 and 4, so that the air flow is directed slightly  
upwards.  
Aeration of the vehicle when ignition is switched off*  
The Climatronic maintains fully automatically a convenience temperature. This is  
achieved by automatically varying the temperature of the outflowing air, the blower  
stages and the air distribution. The system also takes into account sunlight which  
eliminates the need to alter the settings manually. The automatic mode  
⇒ page 117 ensures maximum wellbeing of the occupants at all times of the year.  
On models fitted with power sliding/tilting roof with solar cells, the fresh air blower  
is automatically switched over to “solar mode” if the sun ray's are sufficient after  
switching off the ignition. The solar cells on the sliding/tilting roof deliver power for  
the fresh air blower. This supplies the interior of the car with fresh air.  
For an optimum ventilation, the air outlet vents 3 and 4 must be opened  
⇒ page 108, fig. 137.  
Description of Climatronic system  
The cooling operates only if the following conditions are met:  
The ventilation functions only when the sliding/tilting roof is closed.  
•
•
engine running,  
outside temperature above approx. +2°C,  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
116 Heating and air conditioning system  
WARNING  
Overview of the control elements  
The controls enable a separate setting of the temperature for the left  
and right side.  
•
For your own safety and that of other road users, ensure that all the  
windows are free of ice, snow and misting. Please familiarize yourself about  
how to correctly operate the heating and ventilation systems, how to demist  
and defrost the windows, as well as with the cooling mode.  
•
You should not leave recirculated air mode on over a longer period of  
time, as “stale” air may result in fatigue in the driver and occupants, divert  
your attention and also cause the windows to mist up. The risk of having an  
accident increases. Switch recirculated air mode off as soon as the windows  
begin misting up.  
Note  
•
If the cooling system has not been switched on for a lengthy period, odours may  
be produced at the evaporator because of deposits. Switch the cooling system on  
at least once a month for approximately 5 minutes at the highest blower stage - also  
during the cold season of the year - in order to remove such odours. Also open a  
window for a short time.  
Fig. 141 Climatronic: Control elements  
The buttons  
•
We recommend that you do not smoke in the vehicle when the recirculating air  
1
A Defrost windscreen intensively  
mode is operating since the smoke which is drawn at the evaporator from the inte-  
rior of the vehicle forms deposits in the evaporator of the air conditioning system.  
This produces a permanent odour when the air conditioning system is operating  
which can only be eliminated through considerable effort and expense (replace-  
ment of compressor).  
2
A Air flow to the windows  
3
A Air flow to head  
4
A Air flow in the footwell  
5
A Recirculated air mode  
with air quality sensor  
•
The used air streams out through the air removal openings in the luggage  
6
A Rear window heater  
compartment.  
Buttons / control dial  
•
On vehicles equipped with a factory-fitted radio* or navigation*, the informa-  
7
A Setting of the temperature for the left side, operation of the seat heating of the  
tion of the Climatronic is also shown on the display. This function can be switched  
off, see operating instructions of the radio* or the navigation system*.  
left front seat*  
8
AUTO  
A Automatic mode  
•
•
Using the cooling economically ⇒ page 114.  
Operational problems ⇒ page 115.  
9
OFF  
A Switching off Climatronic  
10  
A Setting the blower speed  
11  
A Button for direct switching on/off of auxiliary heating (auxiliary heating)*  
⇒ page 119  
12  
DUAL  
A Switching on/off of the temperature setting in dual mode  
Heating and air conditioning system 117  
13  
AC  
A Switching cooling on and off  
switching cooling on and off  
switching cooling on and off  
14  
A Setting of the temperature for the right side, operation of the seat heating of  
the right front seat*  
AC  
–
Press the button  
in the button.  
⇒ page 116, fig. 141. The warning light lights up  
Note  
Below the top row of buttons is located the interior temperature sensor. Do not  
glue or cover over the sensor, otherwise it could have an unfavourable effect on the  
Climatronic.  
AC  
–
When you again press the switch  
, the cooling system is switched  
off. The warning light in the button goes out. Only the function of the  
ventilation remains active when no lower temperature than the  
outside temperature can be reached.  
Automatic mode  
The automatic mode is used in order to maintain a constant temper-  
ature and to demist the windows in the interior of the car.  
Setting temperature  
You can separate the interior temperature for the left and right side sepa-  
rately.  
Switching automatic mode on  
–
–
Set a temperature between +18 °C and +26 °C.  
–
You can set the temperature for both sides after switching on the igni-  
Move the air outlet vents 3 and 4 ⇒ page 108, fig. 137, so that the air  
7
tion with the control dial A.  
flow is directed slightly upwards.  
–
If you wish to set the temperature for the right side, turn the control  
AUTO  
. In the right or left top corner a warning light  
–
Press the button  
14  
DUAL  
lights up, this indicates  
dial A. The warning light in the button  
lights up, depending on which unit was last selected.  
that differing temperatures for the left and right side can be set.  
AUTO  
If the warning light in the top right corner of the button  
lights up, the  
DUAL  
If the warning light in the button  
lights up, the temperature for both sides  
Climatronic operates in “HIGH” mode. The “HIGH” mode is the standard setting of  
the Climatronic.  
7
cannot be set with the control dial A. You can reinitiate this function by pressing  
DUAL  
the button  
. The warning light in the button which indicates the possibility to  
set differing temperatures for the left and right side, goes out.  
AUTO  
When pressing again the button  
, the Climatronic changes into the “LOW”  
mode and the warning light in the top left corner lights up. The Climatronic uses  
only in this mode the lower blower speed. However taking into account the noise  
level, this is more comfortable, yet be aware that the effectiveness of the air condi-  
tioning system is reduced particularly if the vehicle is fully occupied.  
You can set the interior temperature between +18°C and +26°C. The interior  
temperature is regulated automatically within this range. If you chose a tempera-  
ture lower than +18°C, a blue symbol lights up at the start of the numerical scale. If  
you chose a temperature higher than +26°C, a red symbol lights up at the end of  
the numerical scale. In both limit positions the Climatronic operates at maximum  
cooling or heating capacity, respectively. The temperature is not controlled in this  
case.  
AUTO  
By pressing again the button  
, you change into the “HIGH” mode.  
The automatic mode is switched off by pressing the button for the air distribution  
or increasing or decreasing the blower speed. The temperature is nevertheless  
regulated.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
118 Heating and air conditioning system  
Lengthy and uneven distribution of the air flow out of the vents (in particular at the  
leg area) and large differences in temperature, for example when getting out of the  
vehicle, can result in chills in sensitive persons.  
Switching recirculated air mode off  
AUTO  
–
Press the button  
or press the button  
repetitively, until the  
warning lights in the button go out.  
Recirculated air mode  
WARNING  
In recirculated air mode air is sucked out of the interior of the vehicle  
and then fed back into the interior. When the automatic air distribu-  
tion control is switched on, an air quality sensor measures the  
concentration of pollutants in the drawn-in air.  
You should not leave recirculated air mode on over a longer period of time,  
as “stale” air may result in fatigue in the driver and occupants, divert your  
attention and also cause the windows to mist up. The risk of having an acci-  
dent increases. Switch recirculated air mode off as soon as the windows  
begin misting up.  
Recirculated air mode prevents polluted air outside the vehicle from  
getting into the vehicle, for example when driving through a tunnel or  
when standing in a traffic jam. If a considerable increase in concentration  
of pollutants is recognized by the air quality sensor, when the automatic  
air distribution control is switched on, the air distribution control will  
temporarily be switched off. If the concentration of pollutants decreases  
to the normal level, the air distribution control is automatically switched  
off so that fresh air can be guided into the vehicle interior.  
Note  
1
•
If the windscreen mists up, press the button  
After the windscreen has been demisted, press the button  
The automatic air distribution control operates only if the outside temperature  
A ⇒ page 116, fig. 141.  
AUTO  
.
•
is higher than approx. 2°C.  
Controlling blower  
Switching recirculated air mode on  
There are a total of seven blower stages available.  
–
Press the button repeatedly  
side of the button lights up.  
until the warning light on the left  
The Climatronic system controls the blower stages automatically in line  
with the interior temperature. You can also, however, adapt the blower  
stages manually to suit your particular needs.  
Switch on automatic air distribution control  
–
Press the button repeatedly  
side of the button lights up.  
until the warning light on the right  
on the left side (reduce blower speed) or on  
–
Press again the button  
the right side (increase blower speed).  
Switch off automatic air distribution control temporarily  
If you switch off the blower, the Climatronic is switched off.  
–
If the air quality sensor does not switch on the air distribution control  
automatically when there is a nauseating smell, you can switch it on  
The set blower speed is displayed above the button  
number of warning lights come on.  
when the respective  
yourself by pressing the button  
the button on the left side.  
*. The warning light lights up in  
Heating and air conditioning system 119  
The auxiliary heating (auxiliary heating) warms up the coolant during the combus-  
tion of fuel from the vehicle tank. The coolant warms up the air, which (if the blower  
speed is not set to zero) flows into the occupant compartment.  
WARNING  
•
“Stale air” may result in fatigue in the driver and occupants, reduce  
attention levels and also cause the windows to mist up. The risk of having an  
accident increases.  
Auxiliary ventilation  
The auxiliary ventilation enables fresh air to flow into the vehicle interior by  
switching off the engine, whereby the interior temperature is effectively decreased  
(e.g. with the vehicle parked in the sun).  
•
•
Do not switch the Climatronic system off for longer than necessary.  
Switch the Climatronic system on as soon as the windows mist up.  
Defrosting windscreen  
WARNING  
•
The auxiliary heating must never be operated in closed rooms - risk of  
poisoning!  
Defrosting windscreen - switching on  
–
Press the button  
⇒ page 116, fig. 141.  
•
•
The auxiliary heating must not be running during refueling - risk of fire.  
The exhaust pipe of the auxiliary heating is located on the underside of  
the vehicle. Therefore do not place the vehicle, if you wish to operate the  
auxiliary heating, in such a way that the exhaust gases of the auxiliary  
heating can come easily into contact with inflammable materials (e.g. dry  
grass) or easily inflammable substances (e.g. fuel run out).  
Defrosting windscreen - switching off  
AUTO  
–
Once again press the button  
or the button  
.
The temperature control is controlled automatically. More air flows out of the air  
outlet vents 1.  
Note  
•
If the auxiliary heating runs, the fuel consumption comes from the vehicle tank.  
Therefore the auxiliary heating should not be operated, if there is very little fuel in  
the tank.  
Auxiliary heating (auxiliary heating and ventilation)*  
Description and important information  
•
The exhaust pipe of the auxiliary heating, which is located on the underside of  
the vehicle, must not be clogged and the exhaust flow must not be blocked.  
If the auxiliary heating and ventilation is running, the vehicle battery discharges.  
The auxiliary heating (auxiliary heating and ventilation) heats or  
supplies the interior of the vehicle with fresh air independent of the  
engine.  
•
If the auxiliary heating and ventilation has been operated several times over a  
longer period, the vehicle must be driven a few kilometers in order to recharge the  
vehicle battery.  
Auxiliary heating (auxiliary heating)  
The auxiliary heating (auxiliary heating) functions in connection with the Climatic or  
Climatronic.  
•
The auxiliary heating only switches the blower on, if it has achieved a coolant  
temperature of approx. 50 °C.  
At low outside temperatures, this can result in a formation of water vapour in  
It can be used when stationary, when engine is switched off for preheating of the  
vehicle as well as while driving (only during the heating phase of the engine).  
•
the area of the engine compartment. This is quite normal and is not an operating  
problem.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
120 Heating and air conditioning system  
•
After switching off the auxiliary heating, the coolant pump runs for a short  
period.  
If the auxiliary heating and ventilation is not switched off earlier, it switches off  
automatically after the expiration of the set operating period, in the menu Running  
time.  
•
The auxiliary heating and ventilation does not switch on or comes on, if the  
vehicle battery indicates a low loading state.  
•
The auxiliary heating (auxiliary heating) does not switch on, if the following was  
shown in the information display or before switching off the ignition: Please refuel!  
(Please refuel!).  
Using the system  
So that the auxiliary heating (auxiliary heating and ventilation) func-  
tions according to your expectations, it is necessary to carry out the  
basic setting before its programming.  
•
The air inlet in front of the windscreen must be free of ice, snow or leaves in  
order to ensure that the auxiliary heating operates properly.  
So that warm air can flow into the vehicle interior after switching on the auxil-  
•
iary heating, you must maintain the temperature normally selected by you (we  
recommend 22°C). It is recommended to put the air flow in the position .  
•
On vehicles with DPF (diesel particle filter) the warm coolant heats up the  
engine.  
Direct switching on/off  
Fig. 143 Information  
display: Aux. heating  
Basic setting  
–
–
–
–
On the information display, select from the Main menu the menu  
point Aux. heating.  
Fig. 142 Button for direct  
switching on/off of the auxil-  
iary heating (auxiliary  
heating and ventilation) on  
the operating part of the  
Climatic  
In the menu Aux. heating (auxiliary heating) ⇒ fig. 143 select the  
menu point Weekday and set the current day.  
Return to a higher level by selecting the menu point Back, i. e. in the  
menu Aux. Heating (auxiliary heating).  
The auxiliary heating (auxiliary heating and ventilation) can be switched on or off at  
In the menu Aux. Heating select the menu point Running time and  
set the desired operating period in steps of 5 minutes. The operating  
period can be 10 to 60 minutes.  
any time directly using the button  
on the operating part of the Climatic  
⇒ fig. 142 or on the operating part of the Climatronic.  
Heating and air conditioning system 121  
Changing the active pre-set time is carried out after selecting the menu point  
Activate in the menu Aux. heating (auxiliary heating) by selecting a pre-set time.  
–
–
–
By selecting the menu point Back, you will reach in the menu  
Aux. Heating (auxiliary heating).  
The prerequisite for the correct switching on of the auxiliary heating (auxiliary  
heating and ventilation) according to the programmed pre-set time is the correct  
setting of the current time and the weekday ⇒ page 120.  
In the menu Aux. heating (auxiliary heating) select the menu point  
Mode.  
In the menu Mode select the desired mode Heating or Ventilation.  
If the system is running, a warning light in the button for direct switching on/off of  
the auxiliary heating  
lights up.  
The running system deactivates after expiration of the operating period or is deac-  
tivated earlier by pressing the button for direct switching on/off of the auxiliary  
Programming  
heating  
⇒ page 120.  
For the programming of the auxiliary heating (auxiliary heating and ventilation) in  
the menu Aux. heating (Aux. heating) there are three pre-set times:  
The random pre-set time can be deactivated by selecting the menu point Deactive  
in the menu Activate.  
•
•
•
Pre-set time 1  
Pre-set time 2  
Pre-set time 3  
After selecting the menu point Factory setting in the menu Aux. heating  
(auxiliary heating), it is possible to change to the factory setting.  
In each pre-set time, the day and the time (hour and minute) can be set for  
switching on the auxiliary heating and/or ventilation.  
An empty position can be found between Sunday and Monday when selecting the  
day. If this empty position is selected, the activation is performed without taking  
into account the day.  
If you leave the pre-set menu by selecting the menu Back or do not operate the  
display for longer than 10°seconds, the set values are stored, but the pre-set time is  
not active.  
Both other pre-set times can be programmed and stored in the same way.  
If you select the menu Activate after setting the desired values, appears on the  
display Pre-set time (weekday, hours, minute) activated! (Pre-set time  
(weekday, hour, minute) activated! and the set pre-set time is active.  
Only one programmed pre-set time can be active.  
The last programmed pre-set time remains active.  
After the auxiliary heating activates at the set time, it is necessary to pre-set a time  
again.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
122 Starting-off and Driving  
Starting-off and Driving  
–
Push the lever upwards as far as the stop.  
Setting steering wheel position  
WARNING  
•
You must not adjust the steering wheel when the vehicle is moving!  
•
The driver must maintain a distance of at least 25 cm to the steering  
wheel ⇒ fig. 145. Not maintaining this minimum distance will mean that the  
airbag system will not be able to properly protect you - hazard!  
•
For safety reasons the lever must always be firmly pushed up to avoid the  
steering wheel altering its position unintentionally when driving - risk of  
accident!  
Fig. 144 Adjustable steering  
wheel: Lever below steering  
column  
•
If you adjust the steering wheel further towards the head, you will reduce  
the protection offered by the driver airbag in the event of an accident. Check  
that the steering wheel is aligned to the chest.  
•
When driving, hold the steering wheel with both hands firmly on the  
outer edge in the 9 o'clock and 3 o'clock position. Never hold the steering  
wheel firmly in the 12 o'clock position or in another way (e.g. in the middle  
of the steering wheel or at the inner steering wheel edge). In such cases,  
injuries to the arms, the hands and the head can occur when the driver  
airbag is deployed.  
Fig. 145 Safe distance to  
steering wheel  
You can set the height and the forward/back position of the steering  
wheel to the desired position.  
–
–
–
Adjust the driver seat ⇒ page 12.  
Pull the lever below the steering column ⇒ fig. 144 down ⇒  
.
Set the steering wheel to the desired position (concerning height and  
forward/back position).  
Starting-off and Driving 123  
Move the steering wheel back and forward a little if the ignition key cannot, or  
Ignition lock  
cannot easily be turned into this position, in order to release the steering lock.  
3
Position A  
The engine is started in this position. At the same time switched on low beam or  
main beam or other electrical components with major power consumption are  
2
briefly switched off. The ignition key moves back into position A when one  
releases the key.  
1
The ignition key must be turned back into position Aeach time before starting the  
engine again. The starter repeat lock in the ignition lock prevents the starter being  
engaged when the engine is running and thus getting damaged.  
Fig. 146 Ignition lock posi-  
tions  
Ignition key withdrawal lock (automatic gearbox)  
You can only withdraw the ignition key after switching off the ignition if the selector  
lever is in position P.  
Petrol engines  
1
A - ignition switched off, engine off, the steering can be locked.  
WARNING  
2
A - ignition switched on  
2
•
When driving, the ignition key must always be in the position A(igni-  
3
A - start engine  
tion switched on) without the engine running. This position is indicated by  
the warning lights coming on. If this is not the case, it could result in unex-  
pected locking of the steering wheel - risk of accident!  
Diesel engines  
1
A - interruption of fuel supply, ignition switched off, engine off, the steering can  
•
Only remove the ignition key from the ignition lock when the vehicle has  
be locked.  
come to a standstill (by applying the handbrake or moving the selector lever  
into the position P). The steering lock can engage immediately - risk of acci-  
dent!  
2
A - heating glow plugs on, ignition switched on  
•
You should not switch on any major electrical components during the heating  
period otherwise the vehicle battery will be drained unnecessarily.  
•
Always withdraw the ignition key if you are going to leave the vehicle,  
even for a short time. This is particularly important if children are left in the  
vehicle. The children might otherwise start the engine or switch on electrical  
equipment (e.g. power windows) - risk of accident or injury!  
3
A - start engine  
Applies to all models:  
1
Position A  
To lock the steering, with the ignition key withdrawn, turn the steering wheel until  
the steering locking pin is heard to engage. You should always lock the steering as  
a general rule if you leave your vehicle. This acts as a deterrent against possible theft  
of your vehicle ⇒  
.
2
Position A  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
124 Starting-off and Driving  
•
Avoid high engine revolutions, full throttle and high engine loads as long as the  
engine has not yet reached its normal operating temperature - risk of damaging the  
engine!  
Starting the engine  
General  
•
Vehicles which are fitted with an exhaust gas catalytic converter should not be  
You can only start the engine only using an original ignition key.  
tow-started over a distance of more than 50 metres.  
•
Place the gearshift lever into neutral (or place the selector lever to the position  
P or N in the case of an automatic gearbox) and put on the handbrake firmly before  
For the sake of the environment  
starting the engine.  
Never warm up the engine when the vehicle is standing. Drive off right away.  
Through this the engine reaches its operating temperature more rapidly and the  
pollutant emissions are lower.  
•
The clutch pedal should be fully depressed when starting the engine which  
means that the starter only has to crank the engine.  
Let go of the key as soon as the engine starts otherwise there may be damage  
•
to the starter.  
Petrol engines  
The engine running noises may louder at first be louder for a short time after  
starting the cold engine until oil pressure can be built up in the hydraulic valve  
clearance compensation. This is quite normal and is not an operating problem.  
These engines are fitted with a starter system which selects the correct fuel/air  
mixture for every external air temperature.  
If the engine does not start ...  
•
•
Do not operate accelerator before and when starting engine.  
You can use the battery of another vehicle as a jump-start aid ⇒ page 252.  
Interrupt the attempt at starting after 10 seconds if the engine does not start  
right awayand wait for about 30 seconds before repeating the attempt.  
It is only possible to tow-start vehicles fitted with a manual gearbox. The tow-  
•
It is possible that the fuse on the electrical fuel pump is defect if the engine still  
does not start. Check the fuse and replace it if necessary ⇒ page 258.  
Contact the nearest specialist garage to obtain professional assistance.  
starting distance must not be more than 50 metres ⇒ page 256.  
•
WARNING  
It may be necessary, if the engine is very hot, to slightly depress the accelerator  
•
Never run the engine in non ventilated or enclosed areas. The exhaust  
after the engine has started.  
gases of the engine contain besides the odorless and colourless carbon  
monoxide a poisonous gas - hazard! Carbon monoxide can cause uncon-  
sciousness and death.  
Diesel engines  
•
Never leave your vehicle unattended with the engine running.  
Glow plug system  
Diesel engines are equipped with a glow plug system, the preglow period being  
controlled automatically in line with the coolant temperature and outside temper-  
ature.  
Caution  
3
•
The starter may only be operated (ignition key position A), if the engine is not  
running. If the starter is immediately operated after switching off the engine, the  
starter or the engine can be damaged.  
The preglow indicator light comes on after the ignition has been switched on.  
Starting-off and Driving 125  
You should not switch on any major electrical components during the heating  
period otherwise the vehicle battery will be drained unnecessarily.  
Caution  
you should not switch the engine off right away at the end of your journey after the  
engine has been operated for a lengthy period at high loads but should be allowed  
it to run at idling speed for about 2 minutes. This prevents any accumulation of heat  
when the engine is switched off.  
•
You should start the engine immediately after the glow plug warning light   
has gone out.  
•
The glow plug warning light will come on for about one second if the engine is  
at a normal operating temperature or if the outside temperature is above +5°C. This  
means that you can start the engine right away.  
Note  
•
Interrupt the attempt at starting after 10 seconds if the engine does not start  
right awayand wait for about 30 seconds before repeating the attempt.  
It is possible that the fuse on the diesel preglow system is defect if the engine  
still does not start. Check the fuse and replace it if necessary ⇒ page 258.  
Contact the nearest specialist garage to obtain professional assistance.  
•
The radiator fan may continue running for a further 10 minutes or so after the  
engine and the ignition have been switched off. The coolant fan may, however, also  
switch on again after some time if the coolant temperature rises because of an  
accumulation of heat in the engine or if the engine is warm and the engine  
compartment is additionally heated by strong sunlight.  
•
•
Starting the engine after the fuel tank has run dry  
•
This is why particular care is required when carrying out any work in the engine  
compartment ⇒ page 225, “Working in the engine compartment”.  
It may take longer than normal to start the engine after refuelling if the fuel tank has  
run completely dry - up to one minute. This is because the fuel system must first of  
all be filled while the attempting to start the engine.  
Shifting (manual gearbox)  
Switching off the engine  
–
The engine can be switched off by turning the ignition key from posi-  
1
tion A into ⇒ page 123, fig. 146.  
WARNING  
•
Never switch off the engine before the vehicle is stationary - risk of acci-  
dent!  
Fig. 147 The shift pattern: 5-  
speed or 6-speed manual  
gearbox  
•
The brake booster only operates when the engine is running. Greater  
physical effort for braking is required when engine is switched off. Because  
if you do not stop as normal, this can cause an accident and severe injuries.  
Shift into reverse only when the vehicle is stationary. Depress the clutch pedal and  
hold it fully depressed. Wait a moment before engaging reverse gear in order to  
avoid any shift noises.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
126 Starting-off and Driving  
The reversing lights will come on once reverse gear is engaged, provided the igni-  
tion is on.  
Releasing the handbrake  
–
Pull the handbrake lever up slightly and at the same time press in the  
locking button ⇒ fig. 148.  
WARNING  
–
Hold the button pressed and push the handbrake lever down fully  
Never engage the reverse gear when driving - risk of accident!  
⇒
.
The handbrake warning light lights up when the handbrake is applied, provided  
the ignition is on.  
Note  
•
One should not lay the hand on the shift lever while driving the vehicle. The  
pressure of the hand will be transferred to the gearshift forks in the gearbox. This  
can, over a period of time, lead to early wear of the gearshift forks.  
A warning signal sounds and the following text appears in the display* if you have  
inadvertently driven off with the handbrake applied:  
Handbrake on  
•
Depress the clutch pedal fully when changing gears, in order to avoid unneces-  
sary wear and damage to the clutch.  
The handbrake warning is activated if you drive at a speed of more than 6 km/h for  
more than 3 seconds.  
Handbrake  
WARNING  
•
Please note that the handbrake must be fully released. A handbrake  
which is only partially released can result in the rear brakes overheating  
which will have a negative effect on the operation of the brake system - risk  
of accident! In addition this can result in premature wear of the rear brake  
pads.  
•
Never leave children unattended in the vehicle. The children might, for  
example, release the handbrake or take the vehicle out of gear. The vehicle  
might then move off - risk of accident!  
Fig. 148 Centre console:  
Handbrake  
Caution  
After the car has come to a stop, always first of all apply the handbrake firmly before  
then additionally engaging a gear (manual gearbox) or moving the selector lever  
into position P (automatic gearbox).  
Applying the handbrake  
–
Pull the handbrake lever up fully.  
Starting-off and Driving 127  
Owner's Manual radio* or navigation*. This improves the audibility of the parking  
aid.  
Rear parking aid*  
The parking aid provides a warning of obstacles behind the vehicle.  
Activating  
The parking aid is activated automatically when reverse gear is engaged and the  
ignition is turned on. This is confirmed by a brief acknowledgement signal.  
Deactivating  
The parking aid is deactivated by removing the reverse gear.  
WARNING  
•
The parking aid is not a substitute for the driver paying proper attention  
and it is always the driver's responsibility to take care when parking the  
vehicle or carrying out similar manoeuvres.  
Fig. 149 Parking aid: Detec-  
tion range of rear sensors  
•
You should therefore satisfy yourself, before reversing, that there is no  
The audible parking aid determines the distance between the rear bumper and an  
obstacle located behind the vehicle with the aid of ultrasound sensors. The tones  
of the parking aid can be adapted in the menu of the information display*  
⇒ page 29. The sensors are integrated in the rear bumper.  
small obstacle, such as a rock, thin post, trailer drawbar etc., behind your  
vehicle. Such an obstacle might not be within the range detected by the  
sensors.  
•
Under certain circumstances, surfaces of certain objects and types of  
clothing cannot reflect the signal of the parking aid. Thus, these objects or  
people who wear such clothing are not recognised by the sensors of the  
parking aid.  
Range of sensors  
The clearance warning begins at a distance of about 160 cm from the obstacle (area  
A
A ⇒ fig. 149). The interval between the warning signals becomes shorter as the  
clearance is reduced.  
B
A continuous tone sounds from a distance of approx. 30 cm (area A) - danger area.  
Note  
You should not reverse any further after this signal sounds! If the vehicle is  
equipped with a factory-fitted towing device*, the border of the danger area starts,  
continuous tone, 5 cm further behind the vehicle. The vehicle can be extended  
through an installed detachable towing device.  
•
The parking aid does not operate if you are towing a trailer (applies to models  
which feature a factory-fitted towing device*).  
•
If a warning signal sounds for about 3 seconds after switching the ignition on  
and engaging reverse gear, and there is no obstacle close to your vehicle, this indi-  
cates a system fault. Have the fault rectified by a specialist workshop.  
On vehicles equipped with a factory-fitted radio* or navigation*, the distance to the  
obstruction is shown graphically on the display. On vehicles with a factory-fitted  
towing device, the sensors are deactivated when towing a trailer. The driver is also  
informed of the radio* or the navigation* by a graphic display (vehicle towing a  
trailer) on the display. The radio* or navigation*, which is factory-fitted, can be set  
so that the play function volume decreases when activating the parking aid, see  
•
The sensors must be kept clean and free of ice to enable the parking aid to  
operate properly.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
128 Starting-off and Driving  
A
behind the vehicle (area A). The interval between the warning signals becomes  
Front and rear parking aid*  
shorter as the clearance is reduced.  
The parking aid provides a warning of obstacles in front and behind  
the vehicle.  
B
A continuous tone sounds from a distance of approx. 30 cm (area A) - danger area.  
From this moment on do not continue driving! If the vehicle is equipped with a  
factory-fitted towing device*, the border of the danger area starts - continuous  
tone - 5 cm further behind the vehicle. The vehicle can be extended through an  
installed detachable towing device.  
On vehicles equipped with a factory-fitted radio* or navigation*, the distance to the  
obstruction is shown graphically on the display. On vehicles with a factory-fitted  
towing device, the rear sensors are deactivated when towing a trailer. The driver is  
also informed of the radio* or the navigation* by a graphic display (vehicle towing  
a trailer) on the display. The radio* or navigation*, which is factory-fitted, can be set  
so that the play function volume decreases when activating the parking aid, see  
Owner's Manual radio* or navigation*. This improves the audibility of the parking  
aid.  
Fig. 150 Activating the  
parking aid  
Activating  
The parking aid is activated when the reverse gear is engaged and the ignition is  
turned on or by pressing the button ⇒ fig. 150 - the symbol  
lights up in the  
button. The activation is confirmed by a brief acknowledgement signal.  
Deactivating  
The parking aid is deactivated after pressing the button°  
⇒ fig. 150 or at a speed  
of more than 10 km/h - the symbol in the button is no longer illuminated.  
Fig. 151 Parking aid: Detec-  
tion range of the front  
sensors  
WARNING  
•
The parking aid is not a substitute for the driver paying proper attention  
and it is always the driver's responsibility to take care when reversing the  
vehicle or carrying out similar manoeuvres.  
The audible parking aid determines the distance between the front or rear bumper  
and an obstacle with the aid of ultrasound sensors. The sensors are integrated in the  
front and rear bumper. The signal tones for the front parking aid sound higher as  
standard than for the rear parking aid. The tones of the parking aid can be adapted  
in the menu of the information display* ⇒ page 29.  
•
You should therefore satisfy yourself, before reversing, that there is no  
small obstacle, such as a rock, thin post, trailer drawbar etc., in front or  
behind your vehicle. Such an obstacle might not be within the range  
detected by the sensors.  
Range of sensors  
•
Under certain circumstances, surfaces of certain objects and types of  
clothing cannot reflect the signal of the parking aid. Thus, these objects or  
The distance warning begins at a distance of about 120°cm from the obstacle in  
A
front of the vehicle (area A ⇒ fig. 151) and about 160 cm from the obstacle  
Starting-off and Driving 129  
WARNING (continued)  
WARNING (continued)  
people who wear such clothing are not recognised by the sensors of the  
parking aid.  
•
In order to prevent unintentional use of the cruise control system, always  
switch off the system after use.  
Note  
Note  
•
Only the front parking aid operates if you are towing a trailer (applies only to  
models which feature a factory-fitted towing device*).  
•
Models fitted with a manual gearbox: Always depress the clutch pedal if you  
switch on the cruise control system when the gearbox is in Neutral. Otherwise the  
engine can rev up unintentionally.  
•
If a warning signal sounds for about 3 seconds after activating the system and  
there is no obstacle close to your vehicle, this indicates a system fault. The fault is  
confirmed additionally when the symbol  
fig. 150. Have the fault rectified by a specialist workshop.  
The sensors must be kept clean and free of ice to enable the parking aid to  
operate properly.  
•
The cruise control system is not able to maintain a constant speed when driving  
flashes in the button ⇒ page 128,  
on steep downhill sections. The weight of the vehicle increases the speed at which  
it travels. One should shift down in good time to a lower gear or slow the vehicle  
down by applying the foot brake.  
•
•
It is not possible on vehicles fitted with an automatic gearbox to switch on the  
cruise control system if the selector lever is in the position P, N or R.  
•
If the parking aid is activated and the selector lever of the automatic gearbox is  
in the position A, warning signal indicates interruption (vehicle can no longer  
P
move).  
Storing a speed  
Cruise control system (CCS)*  
Introduction  
The cruise control system (CCS) maintains a constant speed, more than 30 km/h (20  
mph), once it has been set, without you having to depress the accelerator pedal.  
This is only possible within the range which is permitted by the power output and  
braking power of the engine. The cruise control system makes it possible - particu-  
larly on long journeys - for you to rest your “accelerator foot”.  
Fig. 152 Operating lever:  
Rocker button and switch of  
cruise control system  
WARNING  
A
The cruise control system is operated by means of the switch A and  
•
The cruise control system must not, for safety reasons, be used in dense  
traffic or on unfavourable road surfaces (such as icy roads, slippery roads or  
loose chippings) - risk of accident!  
B
rocker button A in the left lever of the multi-functional switch.  
A
–
Press the switch A ⇒ fig. 152 into the position ON.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
130 Starting-off and Driving  
B
–
After the desired speed has been reached, press the rocker button A  
Slower  
into the SET position.  
B
–
You can decrease the stored speed by pressing the rocker button A  
in the SET position.  
B
After you have released the rocker button Aout of the position SET, the speed you  
have just stored is maintained at a constant speed without having to depress the  
accelerator.  
–
Holding down the rocker button pressed in the SET position will cause  
the speed of the vehicle to reduce continuously. Once the vehicle has  
reached the desired speed, release the rocker button. The set speed is  
then stored in the memory.  
You can increase the speed by depressing the accelerator. Releasing the acceler-  
ator will cause the speed to drop again to the set speed.  
This does not apply, however, if you drive at a speed which is more than 10 km/h  
higher than the set speed for a period of longer than 5 minutes. The stored speed  
will be cancelled in the memory. You then have to re-store the desired speed.  
–
If you release the rocker button when the vehicle is travelling at a  
speed of less than 30 km/h, the speed is not stored, the memory is  
erased. It is then necessary to again store the speed with the rocker  
One can reduce the speed in the usual manner. The system is switched off tempo-  
rarily by actuating the brake or clutch pedal ⇒ page 130.  
B
button Ain the position SET after an increase in speed of the vehicle  
to more than 30 km/hour.  
WARNING  
Switching off the cruise control system temporarily  
First ensure that it is not too high for the traffic conditions which exist at that  
moment before resuming the stored speed.  
–
You can switch off the cruise control system temporarily by  
depressing the brake pedal or clutch pedal, on models with auto-  
matic gearbox and only with brake pedal.  
Changing a stored speed  
–
You can switch off temporarily the cruise control system, if you press  
You can also change the speed of the vehicle without depressing the  
accelerator.  
A
the switch A in the middle position.  
The set speed remains stored in the memory.  
Faster  
The Resumption of the stored speed is achieved by releasing the brake or clutch  
pedal, on vehicles fitted with automatic gearbox only after releasing the brake pedal  
–
You can increase the stored speed without depressing the acceler-  
B
ator, by pressing the rocker button A⇒ page 129, fig. 152 in the RES  
B
and after shortly pressing the rocker button A ⇒ page 129, fig. 152 into the posi-  
position.  
tion RES.  
–
The speed of the vehicle will increase continuously if you hold the  
rocker button pressed in the RES position. Once the vehicle has  
reached the desired speed, release the rocker button. The set speed is  
then stored in the memory.  
WARNING  
First ensure that it is not too high for the traffic conditions which exist at that  
moment before resuming the stored speed.  
Starting-off and Driving 131  
Switching off the cruise control system completely  
A
–
Press the switch A ⇒ page 129, fig. 152 to the right into position  
OFF.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
132 Automatic gearbox  
Automatic gearbox  
Parking  
Automatic gearbox*  
–
–
–
Depress the brake pedal and hold it depressed.  
Information for driving with the 6-speed automatic gearbox*  
Apply the handbrake firmly.  
Your car is equipped with a conventional 6-speed automatic  
gearbox.  
Press and Shiftlock button in the selector lever, move the selector  
lever to P and then release the Shiftlock button.  
The maximum speed is reached in the 5th gear. The 6th gear serves as an  
economic driving programme, which is intended to reduce the fuel  
consumption. Shifting up and down through the gears is performed auto-  
matically. You can also, however, switch the gearbox over into the  
Tiptronic mode. This mode makes it possible for you to also shift gears  
manually ⇒ page 136.  
The engine can only be started when the selector lever is in position P or N  
⇒ page 124.  
It is sufficient to engage selector lever position P when parking on a flat surface.  
When parking on a slope you should first apply the handbrake firmly and then  
move the selector lever into position P. This is to ensure that there is no excessive  
pressure acting on the lock mechanism and that it is easier to subsequently move  
the selector lever out of position P.  
Starting-off and Driving  
If the selector lever position N is selected by accident while driving it is first neces-  
sary to release pressure on the accelerator pedal and wait for idling speed of the  
engine to be reached before engaging a drive position in the selector lever.  
–
–
Depress the brake pedal fully and keep it depressed.  
Press the Shiftlock button (button in handle of the selector lever),  
move the selector lever into the desired position, e.g. D ⇒ page 134,  
and then release the Shiftlock button.  
WARNING  
–
–
Wait a moment until the gearbox has shifted (a slight engagement  
nudge can be felt).  
•
Do not depress the accelerator when changing the position of the  
selector lever if the car is stationary and the engine is running - risk of acci-  
dent!  
Release the brake pedal and depress the accelerator ⇒  
.
•
Never move the selector lever into position R or P when driving - risk of  
an accident!  
Stopping for a short time  
•
When the engine is running and the vehicle is stationary, it is necessary  
–
The selector lever position N does not have to be selected when stop-  
ping just for a short time, such as at a cross roads. It is absolutely suffi-  
cient to hold the stopped vehicle stationary by depressing the foot  
brake. The engine can, however, be allowed just to idle.  
to hold the car with the brake pedal in all the positions of the selector lever  
(except P and N) since the power transmission is never completely inter-  
rupted, also not when the engine is idling - the vehicle "creeps".  
Automatic gearbox 133  
The engine can only be started when the selector lever is in position P or N  
⇒ page 124. At temperatures below -10 °C the engine can only be started in the  
selector lever position P.  
Information for driving with the automatic gearbox DSG*  
The abbreviation DSG means Direct shift gearbox (Direct shift  
gearbox).  
It is sufficient to engage selector lever position P when parking on a flat surface.  
When parking on a slope you should first apply the handbrake firmly and then  
move the selector lever into position P. This is to ensure that there is no excessive  
pressure acting on the lock mechanism and that it is easier to subsequently move  
the selector lever out of position P.  
Two independent clutches are needed for the power transmission  
between the engine and the gearbox. These replace the torque converter  
of the conventional automatic gearbox. Their shifting is matched in such  
a way that there are no jerks when shifting the gear and the power trans-  
mission of the engine to the front wheels is not interrupted. Shifting up  
and down through the gears is performed automatically. You can also,  
however, switch the gearbox over into the Tiptronic mode. This mode  
makes it possible for you to also shift gears manually ⇒ page 136.  
If the selector lever position N is selected by accident while driving it is first neces-  
sary to release pressure on the accelerator pedal and wait for idling speed of the  
engine to be reached before engaging a drive position in the selector lever.  
WARNING  
Starting-off and Driving  
•
Do not depress the accelerator when changing the position of the  
selector lever if the car is stationary and the engine is running - risk of acci-  
dent!  
–
–
Depress the brake pedal fully and keep it depressed.  
Press the Shiftlock button (button in handle of the selector lever),  
move the selector lever into the desired position, e.g. in D, and then  
release the Shiftlock button.  
•
Never move the selector lever into position R or P when driving - risk of  
an accident!  
•
If you are stopping at a hill (downhill section), never try to hold the car  
–
Release the brake pedal and depress the accelerator ⇒  
.
stationary with the gear engaged by means of the “accelerator”, this means  
by letting the clutch slip. This can lead to overheating of the clutch. If there is  
a risk of overheating of the clutch due to overload, the clutch is opened auto-  
matically and the vehicle rolls backward - risk of accident!  
Stopping for a short time  
–
The selector lever position N does not have to be selected when stop-  
ping just for a short time, such as at a cross roads. It is absolutely suffi-  
cient to hold the stopped vehicle stationary by depressing the foot  
brake. The engine can, however, be allowed just to idle.  
•
If you must stop at a slope, depress and hold the brake pedal, so that you  
can prevent the vehicle from rolling back.  
Caution  
Parking  
•
The double clutch on the automatic gearbox DSG is equipped with an overload  
protection. If you make use of the uphill function on a vehicle which is stationary or  
driving slowly uphill, it will result in an increase of thermal stress of the clutches.  
–
–
–
Depress the brake pedal and hold it depressed.  
Apply the handbrake firmly.  
•
An overheating of the clutches can be detected by the flashing of the selector  
level indicator and the “jerk” of the clutches, finally the clutches are opened. The  
power transmission from the engine to the front wheels is interrupted and as a  
Press and Shiftlock button in the selector lever, move the selector  
lever to P and then release the Shiftlock button.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
134 Automatic gearbox  
result of this the vehicle can no longer be driven. If the clutch opens automatically,  
depress the brake pedal, wait a few seconds and only then continue driving.  
If you wish to move the selector lever into or out of this position, you must press the  
Shiftlock button in the handle of the selector lever and at the same time depress the  
brake pedal.  
If the battery is used, the selector lever cannot be moved out of the position P.  
Selector lever positions  
R - Reverse  
Reverse gear must only be engaged when the vehicle is stationary and the engine  
idling ⇒  
.
The brake pedal must be depressed and at the same time the Shiftlock must be  
pressed, if you wish to obtain the selector lever positions R, P or N.  
When the ignition is switched on and the selector lever is in position R, the reverse  
lights will come on.  
N - Neutral  
The transmission is in Neutral in this position.  
Fig. 153 Selector lever  
The brake pedal must be depressed (if the lever is in its position for longer than 2  
seconds) in order to move the selector lever out of the position N into the position  
D or R, with the ignition switched on, on a vehicle travelling at less than 5 km/hour  
or on a stationary vehicle.  
D - Drive, position for driving forward  
When the selector lever is in this position, the forward gears are shifted up and  
down automatically in line with engine load, vehicle speed and the dynamic shift  
programme.  
Fig. 154 Information  
display: Selector lever posi-  
tions  
You must depress the brake pedal if you wish to move into position D from N when  
the vehicle is travelling at less than 5 km/hour or is stationary ⇒  
.
In certain circumstances (e.g. when driving in mountainous regions or when towing  
a trailer) it may be beneficial to select the manual shift programme ⇒ page 136 for  
a short time in order to adapt the gearbox ratios manually to the driving situations.  
The current selector lever position is indicated in the information display of the  
instrument cluster ⇒ fig. 154. In the positions D and S the gear you have already  
engaged will be additionally displayed on the display.  
S - Position for sporty style of driving  
Shifting up later into a higher gear makes it possible to fully exploit the power  
potential of the engine. The gearbox also then shifts down at higher engine speeds  
as in the position D.  
P - Parklock  
The driven wheels are locked mechanically in this position.  
The Parklock must only be engaged when the vehicle is stationary ⇒  
.
Automatic gearbox 135  
The gearbox does not shift into the 6th gear in the position S, because the  
to seesaw out a stuck vehicle. The selector lever lock will click into place if the lever  
is in the N position for more than 2 seconds without the brake pedal being pressed.  
12)  
maximum speed is reached with the 5th gear  
.
The Shiftlock on the selector lever grip must be pressed when moving the selector  
lever out of the position D into the position S.  
The selector lever lock is only active if the vehicle is stationary or moving at speed  
of less than 5 km/hour. The lock is switched off automatically into position N when  
the car is travelling at a higher speed.  
WARNING  
Shiftlock button  
The Shiftlock button in the handle of selector lever prevents certain selector lever  
positions being engaged inadvertently. The selector lever lock is cancelled when  
you press the Shiftlock button.  
•
Never move the selector lever into position R or P when driving - risk of  
an accident!  
•
When the engine is running and the vehicle is stationary, it is necessary  
to hold the car with the brake pedal in all the positions of the selector lever  
(except P and N) since the power transmission is never completely inter-  
rupted, also not when the engine is idling - the vehicle "creeps".  
Keylock - Ignition key withdrawal lock  
You can only withdraw the ignition key after switching off the ignition if the selector  
lever is in position P. If the ignition key is withdrawn, the selector lever is blocked in  
position P.  
•
You must on no account unintentionally operate the throttle (e.g. by  
hand from the engine compartment) if a drive position is engaged when the  
car is stationary. The vehicle would otherwise immediately start off - also  
when the handbrake is firmly applied - risk of an accident!  
Kickdown function  
•
You must move the selector lever into position P and firmly apply the  
The kickdown function provides you with maximum acceleration  
power.  
handbrake first before you or any other person opens the bonnet and starts  
working on the engine when it is running - risk of accident! It is also essential  
to observe all warnings ⇒ page 225, “Working in the engine  
compartment”.  
Depressing the accelerator pedal allows the kickdown function to be activated in  
the desired driving program. This function has precedence over the driving  
programme and serves for maximum acceleration of the vehicle when exploiting  
the maximum power potential of the engine without taking into account the  
current selector lever position (D, S or Tiptronic). The gearbox shifts down to one  
or several gears in line with the driving state and the vehicle accelerates. The  
gearbox does not shift up into the highest gear until the engine has reached its  
maximum revolutions for this gear range.  
Selector lever lock  
Automatic selector lever lock   
With the ignition on, the selector lever is locked when it is in the positions P and N.  
You must first of all depress the brake pedal in order to move the selector lever out  
of this position. The warning light ⇒ page 37 lights up in the instrument cluster  
as a reminder for the driver when the selector lever is in position P and N.  
WARNING  
Please note that using the kickdown function can result in the driven wheels  
spinning on a smooth or slippery road surface - risk of skidding!  
A time delay element ensures that the selector lever is not blocked when rapidly  
switching over the position N (e.g. from R to D). This does, for example, allow one  
12)  
Not valid for vehicles with automatic gearbox DSG.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
136 Automatic gearbox  
Dynamic shift programme  
Tiptronic  
The Tiptronic allows the driver to also shift gears manually.  
The automatic gearbox of your vehicle is controlled electronically. Shifting up and  
down through the gears is performed automatically on the basis of pre-defined  
driving programmes.  
Adopting a moderate style of driving will cause the gearbox to select the most  
economical driving programme. Shifting up into a higher gear as soon as possible  
and shifting down as late as possible will have a favourable effect on your fuel  
consumption.  
Adopting a sporty style of driving with rapid movements of the accelerator pedal  
combined with sharp acceleration and frequent changes in speed, exploiting the  
top speed of the car or depressing the accelerator pedal (kickdown function), will  
cause the gearbox to switch over to this style of driving and shift down earlier with  
frequent changes in gears in comparison to the moderate style of driving.  
Fig. 155 Selector lever:  
Manual shifting of gears  
Selecting the most appropriate driving programme for the particular style of driving  
is a continuous process. Irrespective of this it is, however, possible to switch or shift  
down into a dynamic shift programme by depressing the accelerator rapidly. The  
gearbox shifts down into a lower gear matching the speed of the car and this allows  
you to accelerate rapidly (e.g. when overtaking) without having to depress the  
accelerator pedal fully into the kickdown range. The original programme will be  
reactivated to match your particular style of driving once the gearbox has shifted up  
again.  
Fig. 156 Information  
display: Manual shifting of  
gears  
When driving in hilly regions, the gears are selected to match uphill and downhill  
sections. This avoids the gearbox frequently shifting up and down when negotiating  
an uphill stretch. When driving downhill, it is possible to shift down into the  
Tiptronic position, in order to exploit the engine brake torque.  
The selector lever position you have engaged is indicated in the informa-  
tion display of the instrument cluster together with the engaged gear  
⇒ fig. 156.  
Switching over to manual shifting  
–
Push the selector lever to the right out of position D. After switching  
over, the current engaged gear is indicated in the display.  
Automatic gearbox 137  
Shifting up gears  
Shifting up gears  
+
–
One-touch forward of the selector lever (in the Tiptronic position)  
–
Press the right rocker switch  
steering wheel.  
⇒ fig. 157 for the multifunction  
+
⇒ page 136, fig. 155 A.  
Shifting down gears  
One-touch back of the selector lever (in the Tiptronic position) A.  
Shifting down gears  
-
+
–
–
Press the left rocker switch  
steering wheel.  
⇒ fig. 157 for the multifunction  
It is possible to switch over to manual both when the car is stationary and also when  
driving.  
Temporarily switching over to manual shifting  
When you accelerate, the gearbox shifts up automatically into the higher gear just  
before the maximum permissible engine speed is reached.  
-
–
If the selector lever is in position D or S, press the left rocker switch  
+
or the right rocker switch  
for the multifunction steering wheel.  
If you select a lower gear, the automatic gearbox does not shift down until there is  
no risk of the engine overrevving.  
-
+
–
If the rocker switches or  
are not pressed for some time, the  
manual shifting switches off. You can also switch off the temporary  
switch over to manual shifting by pressing the right rocker switch  
for more than 1 second.  
If you operate the kickdown function, the gearbox shifts into a lower gear in line  
with the vehicle speed and engine speed.  
+
Manual shifting on the multifunction steering wheel*  
Emergency programme  
An emergency programme exists in the event of a fault in the system.  
The gearbox operates in a corresponding emergency programme if there are func-  
tional faults in the gearbox electronics. This is indicated by all of the segments in the  
display lighting up or going out.  
A functional fault can have the following effect:  
•
•
•
The gearbox only shifts into certain gears.  
The reverse gear R cannot be used.  
Fig. 157 Multifunction  
steering wheel: Manual  
shifting of gears  
The manual shift programme (Tiptronic) is switched off in the emergency mode.  
If the gearbox has switched over to emergency mode, drive to the nearest  
specialist garage in order to have the fault rectified.  
Switching over to manual shifting  
–
Push the selector lever to the right out of position D. After switching  
over, the current engaged gear is indicated in the display.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
138 Automatic gearbox  
Selector lever-emergency unlocking  
Tow-starting and towing vehicle  
Tow-starting a vehicle  
It is not possible to tow-start vehicles fitted with automatic gearbox ⇒ page 253.  
you can use jump-start cables connected to the battery of another vehicle for  
starting your car if the vehicle battery is flat ⇒ page 252.  
Towing a vehicle  
Please pay attention to the following information if it comes necessary to tow-in  
your car ⇒ page 253.  
Fig. 158 Selector lever-  
emergency unlocking  
In case of interruption of the power supply (e.g. flat vehicle battery, defec-  
tive fuse) or defect of the selector lever lock, the selector lever can no  
longer be shifted from the position P in the normal way and the vehicle  
can no longer be moved. The selector lever must be unlocked in case of  
emergency.  
–
–
Apply the handbrake firmly.  
Open the storage compartment in front centre console* or the front  
ashtray.  
–
–
–
Carefully pull up the front left and right cover.  
Pull up rear cover.  
Press with a narrow object (e.g. ignition key) the yellow plastic hoop  
⇒ fig. 158 to the left.  
–
Simultaneously press the shiftlock button in the handle of the selector  
13)  
lever in the position N  
.
13)  
If the selector lever is moved again into the position P, it is once again blocked.  
Communication 139  
Communication  
Multifunction steering wheel*  
Operate radio und navigation on the multifunction steering wheel  
Fig. 159 Multifunction  
steering wheel: control  
buttons  
The driver can set the basic functions of the radio and navigation by simply oper-  
ating the buttons located on the steering wheel so that he can concentrate on the  
traffic situation without being distracted as little as possible by operating the radio  
and navigation ⇒ fig. 159.  
This applies only if your vehicle has been installed with radio and navigation at the  
factory. You can of course operate the radio and navigation at the appliance. You  
will find a description in the operating instructions of your radio system.  
When the headlights are switched on, the steering wheel pushbuttons are then also  
illuminated.  
The buttons apply for the respective operating mode of the current radio or naviga-  
tion.  
By pressing the buttons, you can carry out the following functions:  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
140 Communication  
Communication 141  
Navigation  
Button  
Action  
Radio, traffic information  
CD  
The CD changer / MP3  
press briefly  
Switch off/on tone  
1
A
press button for a  
long period of time  
switch off/on*  
Increase volume  
Decrease volume  
1
A
turn upwards  
1
A
turn down-  
1
A
wards  
Changing to the next stored radio station  
Changing to the next stored traffic infor-  
mation  
Changing to the next title  
fast forward  
press briefly  
2
A
Interrupting the traffic report  
press button for  
Interruption of the traffic report  
2
A
a long time  
Changing to the previously stored radio  
station  
Changing to the previously stored traffic  
information  
Changing to the previous title  
fast rewind  
press briefly  
3
A
Interrupting the traffic report  
press button for  
Interruption of the traffic report  
3
A
a long time  
Changing the audio source  
4
A
press briefly  
5
A
Calling up the main menu  
press button for  
5
A
a long time  
press briefly  
6
A
Interruption of the traffic report  
without function  
press button for a  
long period of time  
6
A
Display of the station list  
scroll upwards  
Interruption of the traffic reports  
Changing to the previous title  
General Maintenance Breakdown assistance  
turn upwards  
6
A
without function  
Using the system  
Safety  
Driving Tips  
Te
6
A
142 Communication  
Mobile phones and two-way radio systems  
Note  
Please also refer to the operating instructions of the mobile phones and two-way  
radio systems.  
The installation of a mobile phone and two-way radio system in a vehicle should  
only be carried out by an authorised Škoda Service Partner.  
Škoda Auto permits the operation of mobile phones and two-way radio systems  
with a professionally installed external aerial and a maximum transmission power  
of up to 10 watts.  
Universal telephone preinstallation GSM II*  
It is essential that you inform a specialist garage about the possibilites to assemble  
and operate mobile phones and two-way radio sets which have a power output of  
more than 10 W. They will inform you which technical possibilities exist for retrofit-  
ting mobile telephones and radio transmitters.  
Introduction  
This enables you to make full use of the advantages of a normal carphone (“hands-  
free system - Hands Free” using a microphone integrated in the vehicle, optimal  
transmission of signals using an external aerial etc.). The equipment includes  
14)  
Operation of mobile phones or two-way radio systems may interfere with func-  
tioning of the electronic systems of your vehicle. The reasons for this may be:  
®
also the voice control. The telephone is connected by means of the Bluetooth  
technology ⇒ page 143, “Bluetooth®”. On vehicles fitted with a telephone  
•
•
•
no external aerial,  
mount*, it is also possible to establish the connection via the interface of the  
15)  
external aerial incorrectly installed,  
transmission power greater than 10 watts.  
adapter ⇒ page 145, “Operating telephone calls with the aid of the adapter*.”.  
A phone phonebook is part of the mobile phone preinstallation with voice control.  
In the phone phonebook there are 1500 free memory locations available. This  
phone phonebook is independent of the appliance used for the mobile phone.  
You should also be aware of the fact that only an external aerial makes it possible  
to achieve the optimal range of such equipment.  
Furthermore the volume can be changed individually during the call at any time  
with the button for setting the radio* or on vehicles fitted with multifunction  
steering wheel* with function buttons on the steering wheel.  
WARNING  
•
If a mobile phone or a two-way radio system is operated in the vehicle  
If the system answers with the voice response “Telephone is not ready”, please  
check the operating state of the telephone as follows:  
without using a special external aerial or an external aerial which has been  
incorrectly installed, this can increase the strength of the electromagnetic  
field in the interior of the vehicle.  
•
•
Is the telephone switched on?  
Is the PIN code entered?  
•
•
Please concentrate fully at all times on your driving!  
You must not install two-way radio systems, mobile phones or mounts  
Dialogue  
on the covers of the airbags or within the immediate deployment range of  
airbags. This might result in injuries to the occupants in the event of an acci-  
dent.  
The period, in which the telephone system is ready to receive voice commands and  
carry out the voice commands, is called DIALOGUE. The system gives audible feed-  
back and guides you if necessary through the relevant functions. You can start or  
14)  
Valid for telephone used with adapter* in the telephone mount.  
Not valid for adapter “Bluetooth only” ⇒ page 145.  
15)  
Communication 143  
end the dialogue at any time by pressing the PTT button on the adapter*  
Caution  
⇒ page 145 or on the multifunction steering wheel* ⇒ page 146.  
Taking the mobile phone out of the adapter during the call can lead to interruption  
of the connection. When taking out the mobile phone, the connection to the  
factory-fitted antenna is interrupted, this reduces the quality of the transmitting  
and receiving signal. The charging of the mobile phone battery is also interrupted.  
The dialogue is always automatically ended after carrying out an operation, e.g.  
after erasing the name from the phonebook.  
When receiving an incoming call, the dialogue is immediately interrupted and you  
can accept the call by pressing the button°on the multifunction steering wheel*  
⇒ page 146 or by pressing the button for receiving a call directly on your tele-  
phone.  
Note  
•
Please also refer to the additional instructions ⇒ page 142, “Mobile phones  
and two-way radio systems”.  
Should you have any questions, please contact an authorised Škoda Service  
If a voice command is not detected, the system answers with “Sorry?” and a new  
entry can be performed. After the 2nd error the system repeats the aid. After the 3rd  
error the answer “Cancel” is given and the dialogue is ended.  
•
Partner.  
Optimum understanding of the voice commands depends on the following  
factors:  
®
Bluetooth  
•
Speak with a normal tone of voice without intonation and excessive voice  
pauses.  
®
The Bluetooth technology serves as cableless connection of a  
mobile phone to a hands-free system of your vehicle.  
•
•
Avoid insufficient articulation.  
Close the doors, windows and sliding roof, in order to reduce or stop disturbing  
exterior noise.  
®
In order to connect a mobile phone with Bluetooth to the hands-free  
system, it is necessary to adapt the phone and the hands-free system to  
each other. Detailed information on this is provided in the operating  
instructions of your mobile phone. The following steps must be carried  
out for the connection:  
•
It is recommended to speak louder at higher speeds, so that the tone of your  
voice is louder than the increased surrounding noise.  
•
During the dialogue avoid additional noise in the vehicle, e.g. simultaneously  
talking occupants.  
•
•
Do not speak, if the system makes an announcement.  
–
–
Switch on the ignition.  
The microphone for voice control is directed to the driver and front passenger.  
Therefore the driver and the front passenger can operate the equipment.  
®
Select Bluetooth on the mobile phone and select the menu with  
®
which the mobile phone searches for suitable Bluetooth devices.  
–
If the hands-free system on the display of the mobile phone  
WARNING  
announces Skoda UHV, enter the PIN°1234 within 30 seconds and  
16)  
Pay attention primarily to the traffic situation! As the driver you are fully  
responsible for road safety. Use the telephone system only to such an extent,  
so that you are in full control of your vehicle at any time.  
wait, until the connection is established.  
16)  
Some mobile phones have a menu, in which the authorization for establishing a Bluetooth®  
connection is performed via the input of a code. If the input for the authorization is neces-  
sary, it must always be performed when re-establishing the Bluetooth connection.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
144 Communication  
While connecting the mobile phone with the hands-free system by means of Blue-  
•
Please operate your mobile phone exclusively with a suitable adapter in order  
to keep a low radiation in the vehicle.  
Inserting the mobile phone into the adapter ensures an optimal sending and  
®
tooth , no other phone can be connected with the hands-free system via Blue-  
®
tooth  
.
•
receiving power and offers at the same time the advantage of the battery charging.  
Up to three mobile phones can be connected to the hands-free system by means  
®
®
®
of Bluetooth , whereby only one mobile phone can communicate via Bluetooth  
•
Note that the range of the Bluetooth connection to the handsfree-system is  
with the hands-free system. If a fourth mobile phone is connected to the hands-  
limited to the vehicle interior. The range is dependent on local factors, e.g. obstacles  
between the devices and interferences with other devices. If your mobile phone is  
free-system, then the telephone, which has not been used together with the hands-  
®
®
free-system for the longest period, is disconnected by means of Bluetooth  
.
e.g. in a jacket pocket, this can lead to difficulties when establishing the Bluetooth  
connection with the handsfree-system or the data transfer.  
®
Establish Bluetooth connection  
After switching on the ignition, the Bluetooth connection is automatically estab-  
16)  
Inserting the mobile phone with the adapter*  
lished for the already adapted mobile phone . Check on the mobile unit if the  
automatic connection was established.  
®
Disconnect Bluetooth connection  
®
After withdrawing the ignition key, the Bluetooth connection is disconnected.  
WARNING  
•
Pay attention primarily to the traffic situation! As the driver you are fully  
responsible for road safety. Use the telephone system only to such an extent,  
so that you are in full control of your vehicle at any time - risk of accident!  
Fig. 160 Universal prepara-  
tion for the phone  
®
•
In the event of air transport, the Bluetooth function of the handsfree-  
system must be switched off by a specialist garage!  
Only one telephone mount* is factory-fitted. An adapter for the phone  
can be purchased from the Škoda original accessories.  
Caution  
Taking the mobile phone out of the adapter during the call can lead to interruption  
of the connection. When taking out the mobile phone, the connection to the  
factory-fitted antenna is interrupted, this reduces the quality of the transmitting  
and receiving signal. The charging of the mobile phone battery is also interrupted.  
Inserting the mobile phone with the adapter  
A
–
–
First of all push the adapter Ain the direction of arrow ⇒ fig. 160 up  
to the stop into the mount. Press the adapter slightly downwards, until  
it locks securely into position.  
Note  
A
Insert the mobile phone into the adapter A(as specified in manufac-  
®
•
Not valid for all mobile phones which enable a communication via Bluetooth  
You can ask at an authorised Škoda Service Partner if your telephone is compatible  
with the universal telephone preinstallation GSM II.  
.
turer's instructions).  
Communication 145  
®
telephone is connected to the handsfree-system via Bluetooth , this connection is  
interrupted.  
Removing the mobile phone with the adapter  
–
Press simultaneouly the side locks of the mount and remove the  
mobile phone and adapter ⇒ page 144, fig. 160.  
Adapter “Bluetooth only”  
For the adapters which are marked with the “Bluetooth only” logo, the complete  
communication between the telephone and the handsfree-system of your vehicle  
is carried out only with the help of the Bluetooth technology. If an adapter marked  
Operating telephone calls with the aid of the adapter*.  
®
in such a way is inserted in the telephone mount, it only serves for recharging the  
battery of the telephone and for transmitting the signal onto the outer vehicle  
aerial.  
Aside from the button PTT, the button SOS can be found on certain adapters  
⇒ fig. 162. This button is without function.  
Note  
The adapters illustrated are only prime examples.  
Fig. 161 Illustration image:  
Single-button adapter  
Fig. 162 Illustration image:  
Two-button adapter  
The voice control of the telephone is activated by pressing the button PTT (button  
push to talk) on the adapter ⇒ fig. 161 or ⇒ fig. 162.  
If you insert the adapter with the telephone in the telephone mount, the handsfree-  
system connects to the telephone by means of the interface of the adapter. If the  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
146 Communication  
Operation of the telephone on the multifunction steering wheel*  
The driver can set the basic functions of the telephone by simply operating the  
buttons located on the steering wheel so that he can concentrate on the traffic situ-  
ation without being distracted as little as possible by operating the telephone  
⇒ fig. 163.  
This applies only if your vehicle has been equipped with the telephone preinstalla-  
tion at the factory.  
If the side lights are switched on, the buttons on the multifunction steering wheel  
are illuminated.  
Fig. 163 Multifunction  
steering wheel: Control  
buttons for the telephone  
Overview of the different functions in contrast to the multifunction steering wheel  
without mobile phone operation ⇒ page 139.  
Button  
Action  
Operation  
Activation and deactivation of the voice control°  
(Button PTT - Push to talk)  
press briefly  
1
A
Increase volume  
Decrease volume  
turn upwards  
turn downwards  
press briefly  
1
A
1
A
Accept call, terminate call, entry in the main menu of the telephone, list of selected numbers  
2
A
press button for a long  
Reject call, entry in the main menu of the telephone, list of selected numbers  
2
A
time  
Reach one level higher in the menu (according to the current position in the menu)  
Return in the main menu of the information display  
press briefly  
3
A
press button for a long  
3
A
time  
press briefly  
Confirm menu selection  
4
A
press button for a long  
period of time  
Confirming the selected menu point, the following initial letters in the telephone book  
4
A
The last chosen menu selection, name  
The next menu selection, name  
turn upwards  
4
A
turn downwards  
4
A
Communication 147  
The buttons operate the functions for the operating mode of the current  
telephone.  
Voice commands  
Voice commands for mobile phone operation  
Voice command  
Operate the telephone via the information display*  
Activity  
On vehicles which are factory-fitted with a navigation system* with  
voice control, it is only possible to operate the voice control via the  
navigation system*. The description on how to operate the voice  
control can be found in the operating instructions of your navigation  
system*.  
After this command the PIN code of the mobile  
phone can be entered ⇒ page 148.  
ENTER PIN/PIN CODE  
DIAL NUMBER  
REDIAL  
After this command a telephone number can be  
entered which establishes a connection to the  
requested partner ⇒ page 148.  
After this command the last selected telephone  
number is selected again ⇒ page 149.  
If you select the menu point Telephone on the information display with the aid of  
4
the handwheel A, you can change to the following menus:  
„
„
„
„
Phone book  
Last calls  
Voice commands for operating the phone phone book  
Voice command  
SAVE/STORE  
Activity  
Received calls  
Missed calls  
After this command a name with its telephone  
NAMES/NAME/NUMBE number can be stored in the phone phone book  
R
⇒ page 149.  
Phone book  
In the menu point Phone book is the list of the loaded contacts from the telephone  
memory and the SIM card of the mobile phone. In the phone phonebook there are  
1500 free memory locations available.  
After this command a telephone number which was  
SELECT NAMES/NAME stored under its given name in the phone phone  
book can be selected ⇒ page 150.  
After this command a name in the phone phone  
DELETE NAMES/NAME  
book can be erased ⇒ page 150.  
Note  
The display of texts in the menu Telephone is only possible in German, English,  
French, Italian, Spanish and Czech.  
LISTEN TO/PLAY  
PHONEBOOK  
After this command you can listen-in to the phone  
phone book ⇒ page 151.  
After this command the complete phone book or a  
name can be erased ⇒ page 151.  
DELETE PHONEBOOK  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
148 Communication  
Other possible commands  
•
the mobile phone is switched on.  
The digits zero to nine are permitted. The system detects no continuous digit  
combinations such as twenty-three, but only individually spoken digits (two, three).  
After each order of digits (separation through brief voice pause) the detected digits  
are repeated.  
Voice command  
DIAL  
Activity  
The telephone number is selected.  
In addition to the name in the phone book, which is  
selected on the information display, a voice recording  
is stored to select with the help of the voice com-  
mands or the entered PIN code.  
Notes for entering the PIN code  
STORE  
•
When entering a PIN code with more than 8 digits, the system indicates “The  
PIN is too long”.  
When entering an incorrect PIN code, the system indicates “The PIN is incor-  
rect”.  
The entered name or the digits are repeated. Then the  
system requests with voice response “please pro-  
ceed” the entry of further digits or commands.  
•
REPEAT  
•
If the incorrect PIN code has been entered three times consecutively, the card  
The entered name or the last entered order of digits is  
erased. Previously entered groups of digits are  
repeated. Then the system requests with voice  
response “please proceed” the entry of further digits  
or commands.  
is blocked. With the aid of the personal unblocking code PUK (Personal Unblock  
Key), the SIM card can be unblocked. The unblocking code can only be entered  
via the phone keypad and not through the voice control.  
BACK  
Example for entering the PIN code  
All entered digits are erased. Then the system  
requests with voice response “The number is  
deleted. The number please” the entry of further  
digits or commands.  
Voice command  
Announcement  
DELETE  
ENTER PIN/PIN CODE  
e.g. ZERO ONE TWO THREE  
“The PIN please”.  
“Zero One Two Three”.  
CANCEL  
The dialogue is ended.  
If no entry is put in, the following announcement is made after about 5 seconds.  
“Possible commands are: store, repeat,  
correct, delete or more digits”.  
Enter PIN code  
“The PIN is saved”.  
(end of dialogue)  
STORE  
A PIN code must be entered before operating the system.  
–
–
Press the PTT button.  
You can interrupt the dialogue at any time by pressing the PTT button or with the  
voice command CANCEL.  
Give the command ENTER PIN/PIN CODE after the signal tone.  
After this command the PIN code can be entered.  
The entry of the PIN code is only possible if:  
Dial number  
•
•
the ignition is switched on,  
–
Press the PTT button.  
the mobile phone is in the mount,  
Communication 149  
After giving this command, the last number selected via voice input is selected  
–
Give the command DIAL NUMBER after the signal tone.  
again.  
After giving this command, the system requests the entry of a telephone number.  
The telephone number can be entered as an interconnected spoken row of digits  
(complete number), in the form of order of digits (separation through a brief voice  
pause) or through individually spoken digits. After each order of digits (separation  
through brief voice pause) the detected digits are repeated.  
Example of redial  
Voice command  
REDIAL  
Announcement  
“The number is being dialed”.  
The digits zero to nine are permitted. The system detects no continuous digit  
combinations such as twenty-three, but only individually spoken digits (two, three).  
You can interrupt the dialogue at any time by pressing the PTT button or with the  
voice command CANCEL.  
If you enter more than 20 digits, the system announces: “The number is too long”.  
Additionally for international calls a Plus (+) has to be entered in front of the 20  
digits.  
Phone voice phonebook*  
Example when entering a telephone number  
Store name  
Voice command  
Announcement  
–
–
Press the PTT button.  
DIAL NUMBER  
“The number please”.  
“Zero Six Zero Three”.  
Give the command SAVE/STORE NAMES/NAME/NUMBER after the  
signal tone.  
e.g. ZERO SIX ZERO THREE  
If no entry is put in, the following announcement is made after about 5 seconds.  
After giving this command, the system requests the entry of a name and a tele-  
phone number which should be stored in the phone voice phonebook. In the  
phone voice phonebook up to 50 entries can be stored.  
“Possible commands are: dial, repeat,  
correct, delete or more digits”.  
FIVE SEVEN TWO  
DIAL  
“Five Seven Two”.  
The telephone number can be entered as an interconnected spoken row of digits  
(complete number), in the form of order of digits (separation through a brief voice  
pause) or through individually spoken digits. After each order of digits (separation  
through brief voice pause) the detected digits are repeated.  
“The number is being dialed”.  
You can interrupt the dialogue at any time by pressing the PTT button or with the  
voice command CANCEL.  
The digits zero to nine are permitted. The system detects no continuous digit  
combinations such as twenty-three, but only individually spoken digits (two, three).  
Repeat last call  
If you enter more than 20 digits, the system announces: “The number is too long”.  
Additionally a Plus (+) has to be entered in front of the 20 digits.  
–
–
Press the PTT button.  
The stored entry is shown on the information display* with an asterisk in front of  
the name.  
Give the command REDIAL after the signal tone.  
For similar names additional information (e.g. first names) should be stored.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
150 Communication  
Example for storing in the phone voice phonebook  
Example for selecting an entry out of the phone voice phonebook  
Voice command  
Announcement  
Voice command  
Announcement  
“The name please”.  
“Company xyz”.  
SAVE/STORE  
NAMES/NAME/NUMBER  
SELECT NAMES/NAME  
COMPANY XYZ  
“The name please”.  
COMPANY XYZ  
“Please repeat the name”.  
“The number please”.  
“Zero One Two Three”.  
“Four Five Six”.  
If no entry is put in, the following announcement is made after about 5 seconds.  
COMPANY XYZ  
“Possible commands are: dial, repeat, correct”.  
ZERO ONE TWO THREE  
FOUR FIVE SIX  
DIAL  
“The number is being dialed”.  
You can interrupt the dialogue at any time by pressing the PTT button or with the  
voice command CANCEL.  
If no entry is put in, the following announcement is made after about 5 seconds.  
“Possible commands are: store, repeat, correct,  
delete or more digits”.  
Delete names  
STORE  
“The name COMPANY XYZ is stored”.  
–
–
Press the PTT button.  
You can interrupt the dialogue at any time by pressing the PTT button or with the  
voice command CANCEL.  
Give the command DELETE NAMES/NAME after the signal tone.  
After giving this command, there is the possibility to erase a stored entry in the  
phone voice phone book.  
Select name  
–
–
Press the PTT button.  
Example for erasing an entry out of the phone phonebook  
Give the command DIAL/SELECT NAMES/NAME after the signal  
Voice command  
Announcement  
tone.  
DELETE NAMES/NAME  
“The name please”.  
After giving this command, there is the possibility to select a stored entry out of the  
phone voice phonebook.  
“Do you want to delete the entry Company  
xyz?”.  
COMPANY XYZ  
YES  
“Delete?”.  
If no entry is put in, the following announcement is made after about 5 seconds.  
“Possible commands are: yes, no, repeat, cor-  
rect”.  
YES  
“The name is deleted”.  
Communication 151  
Example for erasing individual names out of the phone phonebook  
You can interrupt the dialogue at any time by pressing the PTT button or with the  
voice command CANCEL.  
Voice command  
Announcement  
If the user answers with NO, the system answers with “Cancel” and the dialogue is  
“Do you want to delete the whole  
phonebook?”  
ended.  
DELETE PHONEBOOK  
If no entry is put in, the following announcement is made after about 5 seconds.  
Delete voice phonebook  
“Possible commands are: yes, no,  
repeat”.  
–
–
Press the PTT button.  
NO  
The phonebook is read out.  
Give the command DELETE PHONEBOOK after the signal tone.  
When announcing the entry to be  
erased, press the PTT button.  
“Do you want to delete (name)?”  
After giving this command there is the possibility to erase the complete phone  
voice phone book or the individually stored names out of the phone phone book.  
If no entry is put in, the following announcement is made after about 5 seconds.  
Example for erasing the complete phonebook  
“Possible commands are: yes, no”.  
YES  
“The name is deleted”.  
Voice command  
Announcement  
Continue reading out the phone book.  
“Do you want to delete the whole  
phonebook?”.  
DELETE PHONEBOOK  
As long as the phonebook is read out, other entries can be erased by pressing the  
PTT button.  
If no entry is put in, the following announcement is made after about 5 seconds.  
“Possible commands are: yes, no,  
repeat”.  
You can end the dialogue at any time with the voice command CANCEL.  
YES  
YES  
“Are you sure?”.  
Listening-in to the phonebook  
“The phonebook is deleted”.  
–
–
Press the PTT button.  
You can interrupt the dialogue at any time by pressing the PTT button or with the  
voice command CANCEL.  
Give the command LISTEN TO/PLAY PHONEBOOK after the signal  
tone.  
After giving this command the phone voice phone book is read out by the system.  
By pressing the PTT button when announcing the desired name, the corresponding  
telephone number is being dialed; the system answers: “The number is being  
dialed”.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
152 Communication  
The dialogue is always automatically ended after carrying out an operation, e.g.  
after erasing the name from the phonebook.  
Universal telephone preinstallation GSM III*  
The dialogue of the incoming call is immediately interrupted and you can accept  
the call by pressing the button .  
Introduction  
This enables you to make full use of the advantages of a normal carphone (“hands-  
free system” using a microphone integrated in the vehicle, optimal transmission of  
signals using an external aerial etc.). The equipment includes also the voice control.  
The telephone is connected using the rSAP profile - Remote SIM access profile  
(telecommunication of the SIM data) by means of Bluetooth technology, if your  
telephone supports this profile. The equipment includes the following functions:  
If a voice command is not detected, the system answers with “Sorry?” and a new  
entry can be performed. After the 2nd error the system repeats the aid. After the 3rd  
error the answer “Cancel” is given and the dialogue is ended.  
®
Optimum understanding of the voice commands depends on the following  
factors:  
•
Speak with a normal tone of voice without intonation and excessive voice  
pauses.  
•
•
•
•
Display of the SMS text in the information display.  
Free talking in the vehicle interior.  
•
•
Avoid insufficient articulation.  
Close the doors, windows and sliding roof, in order to reduce or stop disturbing  
MUTE signal to the radio.  
Voice control (with the set-up possibility for “short and long dialogue”,  
depending on the user's knowledge of the operating structure).  
exterior noise.  
•
It is recommended to speak louder at higher speeds, so that the tone of your  
• Convenience mode with the multifunction steering wheel and the display in the  
information display.  
Handsfree-system.  
voice is louder than the increased surrounding noise.  
•
During the dialogue avoid additional noise in the vehicle, e.g. simultaneously  
•
talking occupants.  
The voice control of the telephone is activated by pressing the button PTT on the  
multifunction steering wheel ⇒ page 154, fig. 164.  
•
•
Do not speak, if the system makes an announcement.  
The microphone for voice control is inserted in the moulded headliner and  
directed to the driver and front passenger. Therefore the driver and the front  
passenger can operate the equipment.  
A phone phonebook is part of the universal telephone preinstallation GSM III with  
voice control. In the phone phonebook there are 1000 free memory locations avail-  
able. This phone phonebook is independent of the appliance used for the mobile  
phone.  
WARNING  
The volume can be changed at any time with the set button of the radio* or with the  
function keys on the multifunction steering wheel*.  
Pay attention primarily to the traffic situation! As the driver you are fully  
responsible for road safety. Use the telephone system only to such an extent,  
so that you are in full control of your vehicle at any time.  
Dialogue  
The period, in which the telephone system is ready to receive voice commands and  
carry out the voice commands, is called DIALOGUE. The system gives audible feed-  
back and guides you if necessary through the relevant functions. You can start or  
end the dialogue at any time by pressing the PTT button.  
Note  
•
Should you have any questions, please contact an authorised Škoda Service  
Partner.  
Communication 153  
•
Please also refer to the additional instructions ⇒ page 142, “Mobile phones  
and two-way radio systems”.  
–
To download the telephone book and the indentification data of the  
SIM card into the new control unit, confirm again the command rSAP  
in your mobile phone. The system reads the telephone book.  
®
Bluetooth  
If you do not want to confirm the command rSAP during each connection of the  
telephone to the control unit, then you must carry out in the menu of the mobile  
phone an authorization using the control unit.  
The equipment enables the wireless connection to the control unit of a  
telephone with Bluetooth function which supports the rSAP profile.  
®
The telephone deregisters from the GSM network and only the control unit ensures  
the communication with the network. In the telephone only the interface for Blue-  
Process of connection  
®
tooth remains active. In this case, you can only select to separate from the device,  
®
–
–
Switch on the ignition.  
switch off the Bluetooth connection or the number of the emergency call 112.  
®
If the PIN was stored, an automatic selection and connection of the telephone take  
place the next time the ignition is switched. Check on your mobile phone if the  
automatic connection was established.  
If you have not switched on Bluetooth on your telephone, switch it  
on.  
–
–
For certain mobile phones it is necessary to switch on first the rSAP  
function.  
Connection terminated  
®
The connection of the handsfree-system is terminated by means of Bluetooth  
:
Press the button on the multifunction steering wheel and select  
device search. The system searches mobile devices and shows these  
in the information display*.  
•
When removing the key from the ignition lock (during a telephone call, the  
connection is disconnected).  
®
•
•
By switching off the Bluetooth in the mobile phone.  
By selecting “separate telephone” in the menu of the mobile phone.  
–
–
Select your telephone in the information display by turning the hand-  
wheel and select it by pressing the handwheel.  
On vehicles which are fitted out with radio or navigation at the factory, it is possible  
Within 30 seconds enter in your telephone the 16 digit PIN of your  
control unit, which is indicated in the information display* and  
confirm it according to the instructions on the display of your tele-  
phone.  
to terminate the telephone call after removing the key from the ignition lock by  
pressing the icon on the touch-screen of the radio  
ating instructions for radio or for navigation.  
17)  
or the navigation, see oper-  
WARNING  
–
–
If your SIM card is blocked by a PIN code, enter the PIN of the SIM card  
of your telephone. The telephone connects to the control unit (during  
the first connection you can only select in the information display*  
and when the vehicle is stationary, if the PIN should be stored).  
•
Pay attention primarily to the traffic situation! As the driver you are fully  
responsible for road safety. Use the telephone system only to such an extent,  
so that you are in full control of your vehicle at any time - risk of accident!  
®
•
In the event of air transport, the Bluetooth function of the handsfree-  
system must be switched off by a specialist garage!  
For the first storage of a new user follow the instructions in the infor-  
mation display.  
17)  
Does not apply for Radio Swing.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
154 Communication  
Note  
•
If the telephone book of the mobile phone contains more than 1 000 entries,  
the system announces a failure while loading the telephone book.  
When connecting to the control unit, follow the instructions on your mobile  
phone.  
Note that the range of the Bluetooth connection to the handsfree-system is  
•
In the memory of the control unit, up to three users can be stored, whereby the  
handsfree-system can only communicate actively with one user. In the case of  
mutual connection with a fourth mobile phone, you must erase one user.  
•
®
•
®
•
Not valid for all mobile phones which enable a communication via Bluetooth  
You can ask at an authorised Škoda Service Partner if your telephone is compatible  
with the universal telephone preinstallation GSM II.  
.
optimized in the vehicle interior. The range is dependent on local factors, e.g.  
obstacles between the devices and interferences with other devices.  
Operation of the telephone on the multifunction steering wheel*  
Fig. 164 Multifunction  
steering wheel: Control  
buttons for the telephone  
The driver can set the basic functions of the telephone by simply operating the  
buttons located on the steering wheel so that he can concentrate on the traffic situ-  
ation without being distracted as little as possible by operating the telephone  
⇒ fig. 164.  
This applies only if your vehicle has been equipped with the telephone preinstalla-  
tion at the factory.  
If the side lights are switched on, the buttons on the multifunction steering wheel  
are illuminated.  
Overview of the different functions in contrast to the multifunction steering wheel  
without mobile phone operation ⇒ page 139.  
Communication 155  
Button  
Action  
Operation  
press briefly  
1
A
Activation and deactivation of the voice control°  
(Button PTT - Push to talk)  
press button for a long  
period of time  
1
A
Increase volume  
Decrease volume  
turn upwards  
turn downwards  
press briefly  
1
A
1
A
Accept call, terminate call, entry in the main menu of the telephone, list of selected numbers  
Reject call, list of the last calls, entry in the main menu of the telephone, list of selected numbers  
2
A
press button for a long  
2
A
time  
Reach one level higher in the menu (according to the current position in the menu)  
Return in the main menu of the information display  
press briefly  
3
A
press button for a long  
3
A
time  
press briefly  
4
A
Confirm menu selection  
press button for a long  
period of time  
4
A
The last chosen menu selection, name  
The next menu selection, name  
turn upwards  
turn downwards  
4
A
4
A
To the previous initial letter in the telephone book  
To the next initial letter in the telephone book  
quickly turn upwards  
quickly turn downwards  
4
A
4
A
The buttons operate the functions for the operating mode of the current  
telephone.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
156 Communication  
Call register  
Operate the telephone via the information display*  
In the menu point Call register, you can select the following menu points:  
„
„
„
„
Missed calls  
Received calls  
Last calls  
Delete lists  
Voice mailbox  
In the menu point Voice mailbox there is a list of messages from the missed calls.  
Messages  
Fig. 165 Information  
display: Menu telephone  
In the menu point Messages there is a list of received text messages.  
Bluetooth  
If you select the menu point Telephone on the information display with the aid of  
In the menu Bluetooth you can select the following menu points:  
4
the handwheel A, you can change to the following menus:  
„
„
„
„
User - the overview of the stored users  
„
„
„
„
„
„
„
„
Phone book  
Dial number  
Call register  
Voice mailbox  
Messages  
Bluetooth  
Settings  
New user - Search for users who are in the reception range  
Visibility - Switching on the visibility of the telephone unit for other devices  
Extras  
„
Headset  
Modem  
„
„
Phone name - the possibility to change the name of the telephone unit (pre-  
set SKODA-rSAP)  
Back  
Settings  
Phone book  
In the menu Settings you can select the following menu points:  
In the menu point Phone book is the list of the loaded contacts from the telephone  
memory and the SIM card of the mobile phone. In the phone phonebook there are  
1000 free memory locations available.  
„
Phone book  
„
Update  
„
Select memory  
Dial number  
„
„
„
SIM & phone (SIM & Mobile phone)  
SIM card  
In the menu point Dial number, you can write any telephone number. Select in  
sequence the desired digits with the aid of the handwheel and confirm it by  
pressing the handwheel. You can select the numbers 0 - 9, the symbols *, # and the  
functions Delete, Call, Cancel.  
Mobile phone  
Communication 157  
„
List  
„
Voice commands  
Surname  
Voice commands for operating the telephone control unit  
„
First name  
„
„
Own no. send - the possibility to suppress one's own number on the unit called  
Voice command  
HELP  
Activity  
Signal settings  
After this command the system repeats all possible  
commands.  
„
Ring tone  
Volume  
„
LONG DIALOGUE  
SHORT DIALOGUE  
Help is not reduced (suitable for beginners).  
„
Phone settings  
Help is clearly reduced (good operating knowledge  
provided).  
„
„
Select operator  
„
Automatic  
Manual  
After this command a name can be entered which  
establishes a connection to the requested partner  
⇒ page 158.  
„
CALL NAME  
Off time  
„
+ 5 Minutes  
- 5 Minutes  
After this command a phone number can be entered  
which establishes a connection to the requested  
party.  
DIAL NUMBER  
„
„
„
GPRS - Setting of the access point of the user  
After this command the system selects the last  
selected number.  
Switch off ph. - switching off the telephone unit (telephone remains  
REDIAL  
connected)  
Other possible commands  
Back  
Return in the main menu of the information display.  
Voice command  
CALLS (SELECT)  
Activity  
The telephone number is selected.  
Note  
The entered name or the digits are repeated. Then  
the system requests with voice response “please  
proceed” the entry of further digits or commands.  
The readout of the menu Telephone and the voice control are not possible in the  
Russian and Chinese language.  
REPEAT  
The entered name or the last entered order of digits is  
erased. Previously entered groups of digits are  
repeated. Then the system requests with voice  
response “and proceed?” the entry of further digits  
or commands.  
BACK  
DELETE  
CANCEL  
All entered digits are erased.  
The dialogue is ended.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
158 Communication  
Example for storing the recording in the phone voice phonebook  
Phone voice phonebook*  
Voice command  
STORE NAME  
Name XYZ  
Announcement  
Store name  
“The name please”  
“Please repeat the name”  
“The name XYZ is stored”  
–
–
Press the button .  
Name XYZ  
In the menu telephone, select the menu point Phone book and in this  
menu point, select a contact of which you want to record a voice  
You can interrupt the dialogue at any time by pressing the PTT button or with the  
voice command CANCEL.  
4
recording and confirm it with the handwheel A⇒ page 154, fig. 164.  
–
–
–
–
Select the menu point Record and afterwards Recording.  
The system gives the command “Store name, name please”.  
Pronounce the name, e. g “Name XYZ”, the system repeats the name.  
The system gives the notice “Name stored”.  
Select name  
1
–
–
Press the button PTT A ⇒ page 154, fig. 164.  
Give the command CALL NAME after the signal tone.  
In the case that the system does not understand the spoken name, it gives the  
notice “Pardon?”, “Please repeat the name”, “The name is too short” or “The  
name is too long”.  
After giving this command, the system requests the entry of the name to be called.  
Example for selecting the name  
In the phone voice phonebook up to 15 entries can be stored.  
Voice command  
CALL NAME  
Announcement  
For similar names additional information (e.g. first names) should be stored.  
“Call name”  
Voice commands for operating the phone voice phone book  
Name XYZ  
“Do you want to call XYZ?”  
“The name is being dialed”  
Voice command  
Activity  
CALLS (SELECT)  
LISTEN TO ALL THE  
NAMES  
After this command the control unit repeats all stored  
names.  
In the case that the list is empty, the message “The name list is empty, main  
menu” sounds.  
After this command, you can enter a name which you  
would like to erase from the internal phone voice  
phonebook.  
If the system does not recognize the name called, it asks you to repeat using the  
command “Pardon?”. If the system does not recognize the name to be called after  
repeating, the message sounds “The name does not exist. You receive the  
current name list with LISTEN TO ALL THE NAMES, main menu”.  
DELETE NAME  
After this command, you can erase the complete list  
of the stored names.  
DELETE ALL NAMES  
You can interrupt the dialogue at any time by pressing the PTT button or with the  
voice command CANCEL.  
Communication 159  
Example for erasing an entry out of the phone voice phonebook  
Listening-in to the voice phonebook  
Voice command  
DELETE NAME  
Name XYZ  
YES  
Announcement  
–
–
Press the PTT button.  
“The name please”  
Give the command LISTEN TO ALL THE NAMES after the signal tone.  
“Do you want to erase XYZ?”  
“The name is deleted”  
After giving this command, all voice recordings are replayed from the list of the  
control unit. By pressing the PTT button when announcing the desired name, the  
corresponding telephone number is being dialed; the system answers: “The  
number is being dialed”.  
You can interrupt the dialogue at any time by pressing the PTT button or with the  
voice command CANCEL.  
If the user answers with NO, the system answers with “Cancel” and the dialogue is  
Example for selecting the name  
ended.  
Voice command  
Announcement  
LISTEN TO ALL THE NAMES  
“Interrupt using the voice button”  
Erase the complete phone voice phonebook  
In the case that the list is empty, the system announces “The name list is empty”.  
–
–
Press the PTT button.  
You can interrupt the dialogue at any time by pressing the PTT button or with the  
voice command CANCEL.  
Give the command DELETE PHONEBOOK after the signal tone.  
After replaying the complete list, the system announces “End of name list”.  
After giving this command, there is the possibility to erase the complete phone  
voice phonebook.  
Erase entries out of the phone voice phonebook  
Example for erasing the complete phone voice phonebook  
Voice command  
Announcement  
–
–
Press the PTT button.  
“Do you want to delete all the  
names?”  
Give the command ERASE NAME after the signal tone.  
DELETE ALL NAMES  
After giving this command, there is the possibility to erase a stored entry in the  
phone voice phonebook.  
YES  
YES  
“Are you sure?”  
“All the names are deleted”  
You can interrupt the dialogue at any time by pressing the PTT button or with the  
voice command CANCEL.  
If the user answers with NO, the system answers with “Cancel” and the dialogue is  
ended.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
160 Communication  
Loading a CD  
Inputs AUX-IN* and MDI*  
C
–
Touch the button A and guide the CD (compact disc) into the CD-  
The input AUX-IN is located below the armrest* of the front seats and is marked  
with .  
B
case A. The CD is automatically loaded onto the next free position in  
D
the CD-changer. The LED in the corresponding button A stops  
flashing.  
The input MDI is located in the storage compartment on the front passenger side.  
The inputs AUX-IN and MDI connect the external audio sources (e.g. iPod or mp3  
player) and record music from these devices via your radio* or navigation system*  
installed in the factory.  
Load CDs  
C
–
Hold the button A pressed and guide the CDs one after the other  
(maximum 6 CDs) into the CD case A. The LEDs in the buttons A  
B
D
The description of the operation can be found in the relevant Owner's Manual of  
your radio* or your navigation*.  
are no longer flashing.  
Loading a CD to one definite position  
Note  
C
D
–
Touch button A. The LEDs in the buttons A light up at the memory  
•
The loudspeakers in the vehicle are matched to a power output of the radio and  
navigation system of 4x 20°W.  
For the equipment sound system*, the loudspeakers are matched to a power  
spaces, which are already assigned and flash in the case of free  
memory spaces.  
•
D
B
–
Touch the desired button A and guide the CD into the CD-case A.  
output of the amplifier of 4x40°W + 6x20 W.  
Ejecting a CD  
CD changer*  
A
–
Touch the button A, in order to eject a CD. For assigned memory  
D
spaces, now the LEDs light up in the buttons A.  
D
–
Touch the corresponding button A. The CD is ejected.  
Ejecting all CDs  
A
–
Hold the button Apressed for more than 2 seconds, in order to eject  
the CDs. All CDs in the CD-changer are ejected consecutively.  
Note  
B
•
Always guide the CD into the CD-case A with the printed side pointing  
upwards.  
Fig. 166 The CD changer  
•
Never push the CD with force into the CD-case as the insertion is performed  
automatically.  
The CD changer for the radio and navigation system is located in the right  
side compartment of the luggage compartment.  
Communication 161  
•
After loading a CD into the CD-changer, you must wait until the LED of the  
D
B
corresponding button A lights up. Then the CD-case A is free to load the next  
CD.  
•
If you have selected a position, on which a CD is already located, this CD will be  
ejected. Take out the ejected CD and load the desired CD.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
162 Communication  

Related Topics

Cockpit The brief instruction Basic functions and important information Instruments and Indicator/Warning Lights General view of the instrument cluster Engine revolutions counter Speedometer Coolant temperature gauge Fuel gauge Counter for distance driven Service Interval Display Digital clock Multi-functional indicator (onboard computer)* Information display* Auto Check Control* Warning lights Unlocking and locking Key Changing the battery of the radio remote control Electronic immobiliser Child safety lock Central locking system Remote control* Synchonisation of the remote control Anti-theft alarm system* Power windows* Electric sliding/tilting roof* Lights and Visibility Lights Interior lighting Visibility Windshield wiper and wash system Rear-view mirror Seats and Stowage Front seats Adjusting front seats electrically* Head restraints Middle rear head restraint Rear seats Pedals luggage compartment Net partition (Combi)* The roof rack* Cup holder Note holder Ashtray* Cigarette lighter*, power sockets Storage compartments Overview Storage compartment on the front passenger side Cooling of storage compartment on front passenger side* Storage compartment on the driver's side Storage compartment on the dash panel* Storage compartment in front centre console* Storage net on the front centre console* Storage compartment for spectacles* Storage compartment in the front doors Storage compartment below front passenger seat* Front seat armrest with storage compartment* Rear seat armrest with storage compartment* Storage compartment in rear centre console* Seat backrest with opening for skis* Through-loading bag (Unibag)* Side compartment* Storage compartment behind the rear seats* (Combi) Clothes hooks* Heating and air conditioning system Air outlet vents Heating Climatic* (semi-automatic air conditioning system) Climatronic* (automatic air conditioning) Auxiliary heating (auxiliary heating and ventilation)* Starting-off and Driving Setting steering wheel position Ignition lock Starting the engine Switching off the engine Shifting (manual gearbox) Handbrake Rear parking aid* Front and rear parking aid* Cruise control system (CCS)* Automatic gearbox Automatic gearbox* Communication Multifunction steering wheel* Mobile phones and two-way radio systems Universal telephone preinstallation GSM II* Universal telephone preinstallation GSM III* Phone voice phonebook* Inputs AUX-IN* and MDI* CD changer*

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot