130 Starting-off and Driving
B
–
After the desired speed has been reached, press the rocker button A
Slower
into the SET position.
B
–
You can decrease the stored speed by pressing the rocker button A
in the SET position.
B
After you have released the rocker button Aout of the position SET, the speed you
have just stored is maintained at a constant speed without having to depress the
accelerator.
–
Holding down the rocker button pressed in the SET position will cause
the speed of the vehicle to reduce continuously. Once the vehicle has
reached the desired speed, release the rocker button. The set speed is
then stored in the memory.
You can increase the speed by depressing the accelerator. Releasing the acceler-
ator will cause the speed to drop again to the set speed.
This does not apply, however, if you drive at a speed which is more than 10 km/h
higher than the set speed for a period of longer than 5 minutes. The stored speed
will be cancelled in the memory. You then have to re-store the desired speed.
–
If you release the rocker button when the vehicle is travelling at a
speed of less than 30 km/h, the speed is not stored, the memory is
erased. It is then necessary to again store the speed with the rocker
One can reduce the speed in the usual manner. The system is switched off tempo-
rarily by actuating the brake or clutch pedal ⇒ page 130.
B
button Ain the position SET after an increase in speed of the vehicle
to more than 30 km/hour.
WARNING
Switching off the cruise control system temporarily
First ensure that it is not too high for the traffic conditions which exist at that
moment before resuming the stored speed.
–
You can switch off the cruise control system temporarily by
depressing the brake pedal or clutch pedal, on models with auto-
matic gearbox and only with brake pedal.
Changing a stored speed
–
You can switch off temporarily the cruise control system, if you press
You can also change the speed of the vehicle without depressing the
accelerator.
A
the switch A in the middle position.
The set speed remains stored in the memory.
Faster
The Resumption of the stored speed is achieved by releasing the brake or clutch
pedal, on vehicles fitted with automatic gearbox only after releasing the brake pedal
–
You can increase the stored speed without depressing the acceler-
B
ator, by pressing the rocker button A⇒ page 129, fig. 152 in the RES
B
and after shortly pressing the rocker button A ⇒ page 129, fig. 152 into the posi-
position.
tion RES.
–
The speed of the vehicle will increase continuously if you hold the
rocker button pressed in the RES position. Once the vehicle has
reached the desired speed, release the rocker button. The set speed is
then stored in the memory.
WARNING
First ensure that it is not too high for the traffic conditions which exist at that
moment before resuming the stored speed.
English 
