Unlocking and locking 43
For the sake of the environment
Dispose of an old battery in accordance with environmental regulations.
Note
•
The replacement battery must have the same specification as the original
battery.
•
If it is still not be possible to unlock or lock the vehicle with the remote control
even after replacing the battery this means that the system has to be synchronised
Fig. 39 Cover of the trans-
mitter housing
⇒ page 50.
Each remote control key contains a battery which is housed in the cover
Electronic immobiliser
B
A of the transmitter housing ⇒ page 42, fig. 38. We recommend that
you have the batteries of the key replaced by an authorised Škoda Service
Partner. You should, however, proceed as follows if you wish to replace
the battery yourself:
The electronic immobiliser prevents the vehicle being operated by an
unauthorised person.
An electronic chip is integrated in the head of the key. The immobiliser is deacti-
vated with the aid of this chip when the key is inserted in the ignition lock. The elec-
tronic immobiliser is automatically activated when you withdraw the ignition key
from the lock.
–
–
Fold open the key.
A
Use a thin screwdriver to carefully lever off the front part of the key A
⇒ page 42, fig. 38 from the transmitter housing A.
B
–
Take off the cover of the transmitter housing ⇒ fig. 39 in direction of
arrow.
Note
It is only possible to start the engine of your car with a Genuine Škoda key with the
matching code.
–
–
Take the used battery out of the housing cover.
Insert the new battery. Ensure that the “+” symbol on the battery is
facing downwards. The correct polarity is also shown on the cover of
the transmitter housing.
–
–
Insert cover with battery in place at the rear of the transmitter housing
and press both parts together.
Insert the transmitter housing into the front part of the key so that the
two parts lock into each other.
Using the system
Safety
Driving Tips
General Maintenance
Breakdown assistance
Technical Data
English 
