2004-2012 Skoda Octavia 4 Door Using the system -> Communication User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Using the system -> Communication for Your Skoda Octavia 4 Door Second Generation (2004-2012)

Communication 139  
Communication  
Multifunction steering wheel*  
Operate radio und navigation on the multifunction steering wheel  
Fig. 159 Multifunction  
steering wheel: control  
buttons  
The driver can set the basic functions of the radio and navigation by simply oper-  
ating the buttons located on the steering wheel so that he can concentrate on the  
traffic situation without being distracted as little as possible by operating the radio  
and navigation ⇒ fig. 159.  
This applies only if your vehicle has been installed with radio and navigation at the  
factory. You can of course operate the radio and navigation at the appliance. You  
will find a description in the operating instructions of your radio system.  
When the headlights are switched on, the steering wheel pushbuttons are then also  
illuminated.  
The buttons apply for the respective operating mode of the current radio or naviga-  
tion.  
By pressing the buttons, you can carry out the following functions:  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
140 Communication  
Communication 141  
Navigation  
Button  
Action  
Radio, traffic information  
CD  
The CD changer / MP3  
press briefly  
Switch off/on tone  
1
A
press button for a  
long period of time  
switch off/on*  
Increase volume  
Decrease volume  
1
A
turn upwards  
1
A
turn down-  
1
A
wards  
Changing to the next stored radio station  
Changing to the next stored traffic infor-  
mation  
Changing to the next title  
fast forward  
press briefly  
2
A
Interrupting the traffic report  
press button for  
Interruption of the traffic report  
2
A
a long time  
Changing to the previously stored radio  
station  
Changing to the previously stored traffic  
information  
Changing to the previous title  
fast rewind  
press briefly  
3
A
Interrupting the traffic report  
press button for  
Interruption of the traffic report  
3
A
a long time  
Changing the audio source  
4
A
press briefly  
5
A
Calling up the main menu  
press button for  
5
A
a long time  
press briefly  
6
A
Interruption of the traffic report  
without function  
press button for a  
long period of time  
6
A
Display of the station list  
scroll upwards  
Interruption of the traffic reports  
Changing to the previous title  
General Maintenance Breakdown assistance  
turn upwards  
6
A
without function  
Using the system  
Safety  
Driving Tips  
Te
6
A
142 Communication  
Mobile phones and two-way radio systems  
Note  
Please also refer to the operating instructions of the mobile phones and two-way  
radio systems.  
The installation of a mobile phone and two-way radio system in a vehicle should  
only be carried out by an authorised Škoda Service Partner.  
Škoda Auto permits the operation of mobile phones and two-way radio systems  
with a professionally installed external aerial and a maximum transmission power  
of up to 10 watts.  
Universal telephone preinstallation GSM II*  
It is essential that you inform a specialist garage about the possibilites to assemble  
and operate mobile phones and two-way radio sets which have a power output of  
more than 10 W. They will inform you which technical possibilities exist for retrofit-  
ting mobile telephones and radio transmitters.  
Introduction  
This enables you to make full use of the advantages of a normal carphone (“hands-  
free system - Hands Free” using a microphone integrated in the vehicle, optimal  
transmission of signals using an external aerial etc.). The equipment includes  
14)  
Operation of mobile phones or two-way radio systems may interfere with func-  
tioning of the electronic systems of your vehicle. The reasons for this may be:  
®
also the voice control. The telephone is connected by means of the Bluetooth  
technology ⇒ page 143, “Bluetooth®”. On vehicles fitted with a telephone  
•
•
•
no external aerial,  
mount*, it is also possible to establish the connection via the interface of the  
15)  
external aerial incorrectly installed,  
transmission power greater than 10 watts.  
adapter ⇒ page 145, “Operating telephone calls with the aid of the adapter*.”.  
A phone phonebook is part of the mobile phone preinstallation with voice control.  
In the phone phonebook there are 1500 free memory locations available. This  
phone phonebook is independent of the appliance used for the mobile phone.  
You should also be aware of the fact that only an external aerial makes it possible  
to achieve the optimal range of such equipment.  
Furthermore the volume can be changed individually during the call at any time  
with the button for setting the radio* or on vehicles fitted with multifunction  
steering wheel* with function buttons on the steering wheel.  
WARNING  
•
If a mobile phone or a two-way radio system is operated in the vehicle  
If the system answers with the voice response “Telephone is not ready”, please  
check the operating state of the telephone as follows:  
without using a special external aerial or an external aerial which has been  
incorrectly installed, this can increase the strength of the electromagnetic  
field in the interior of the vehicle.  
•
•
Is the telephone switched on?  
Is the PIN code entered?  
•
•
Please concentrate fully at all times on your driving!  
You must not install two-way radio systems, mobile phones or mounts  
Dialogue  
on the covers of the airbags or within the immediate deployment range of  
airbags. This might result in injuries to the occupants in the event of an acci-  
dent.  
The period, in which the telephone system is ready to receive voice commands and  
carry out the voice commands, is called DIALOGUE. The system gives audible feed-  
back and guides you if necessary through the relevant functions. You can start or  
14)  
Valid for telephone used with adapter* in the telephone mount.  
Not valid for adapter “Bluetooth only” ⇒ page 145.  
15)  
Communication 143  
end the dialogue at any time by pressing the PTT button on the adapter*  
Caution  
⇒ page 145 or on the multifunction steering wheel* ⇒ page 146.  
Taking the mobile phone out of the adapter during the call can lead to interruption  
of the connection. When taking out the mobile phone, the connection to the  
factory-fitted antenna is interrupted, this reduces the quality of the transmitting  
and receiving signal. The charging of the mobile phone battery is also interrupted.  
The dialogue is always automatically ended after carrying out an operation, e.g.  
after erasing the name from the phonebook.  
When receiving an incoming call, the dialogue is immediately interrupted and you  
can accept the call by pressing the button°on the multifunction steering wheel*  
⇒ page 146 or by pressing the button for receiving a call directly on your tele-  
phone.  
Note  
•
Please also refer to the additional instructions ⇒ page 142, “Mobile phones  
and two-way radio systems”.  
Should you have any questions, please contact an authorised Škoda Service  
If a voice command is not detected, the system answers with “Sorry?” and a new  
entry can be performed. After the 2nd error the system repeats the aid. After the 3rd  
error the answer “Cancel” is given and the dialogue is ended.  
•
Partner.  
Optimum understanding of the voice commands depends on the following  
factors:  
®
Bluetooth  
•
Speak with a normal tone of voice without intonation and excessive voice  
pauses.  
®
The Bluetooth technology serves as cableless connection of a  
mobile phone to a hands-free system of your vehicle.  
•
•
Avoid insufficient articulation.  
Close the doors, windows and sliding roof, in order to reduce or stop disturbing  
exterior noise.  
®
In order to connect a mobile phone with Bluetooth to the hands-free  
system, it is necessary to adapt the phone and the hands-free system to  
each other. Detailed information on this is provided in the operating  
instructions of your mobile phone. The following steps must be carried  
out for the connection:  
•
It is recommended to speak louder at higher speeds, so that the tone of your  
voice is louder than the increased surrounding noise.  
•
During the dialogue avoid additional noise in the vehicle, e.g. simultaneously  
talking occupants.  
•
•
Do not speak, if the system makes an announcement.  
–
–
Switch on the ignition.  
The microphone for voice control is directed to the driver and front passenger.  
Therefore the driver and the front passenger can operate the equipment.  
®
Select Bluetooth on the mobile phone and select the menu with  
®
which the mobile phone searches for suitable Bluetooth devices.  
–
If the hands-free system on the display of the mobile phone  
WARNING  
announces Skoda UHV, enter the PIN°1234 within 30 seconds and  
16)  
Pay attention primarily to the traffic situation! As the driver you are fully  
responsible for road safety. Use the telephone system only to such an extent,  
so that you are in full control of your vehicle at any time.  
wait, until the connection is established.  
16)  
Some mobile phones have a menu, in which the authorization for establishing a Bluetooth®  
connection is performed via the input of a code. If the input for the authorization is neces-  
sary, it must always be performed when re-establishing the Bluetooth connection.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
144 Communication  
While connecting the mobile phone with the hands-free system by means of Blue-  
•
Please operate your mobile phone exclusively with a suitable adapter in order  
to keep a low radiation in the vehicle.  
Inserting the mobile phone into the adapter ensures an optimal sending and  
®
tooth , no other phone can be connected with the hands-free system via Blue-  
®
tooth  
.
•
receiving power and offers at the same time the advantage of the battery charging.  
Up to three mobile phones can be connected to the hands-free system by means  
®
®
®
of Bluetooth , whereby only one mobile phone can communicate via Bluetooth  
•
Note that the range of the Bluetooth connection to the handsfree-system is  
with the hands-free system. If a fourth mobile phone is connected to the hands-  
limited to the vehicle interior. The range is dependent on local factors, e.g. obstacles  
between the devices and interferences with other devices. If your mobile phone is  
free-system, then the telephone, which has not been used together with the hands-  
®
®
free-system for the longest period, is disconnected by means of Bluetooth  
.
e.g. in a jacket pocket, this can lead to difficulties when establishing the Bluetooth  
connection with the handsfree-system or the data transfer.  
®
Establish Bluetooth connection  
After switching on the ignition, the Bluetooth connection is automatically estab-  
16)  
Inserting the mobile phone with the adapter*  
lished for the already adapted mobile phone . Check on the mobile unit if the  
automatic connection was established.  
®
Disconnect Bluetooth connection  
®
After withdrawing the ignition key, the Bluetooth connection is disconnected.  
WARNING  
•
Pay attention primarily to the traffic situation! As the driver you are fully  
responsible for road safety. Use the telephone system only to such an extent,  
so that you are in full control of your vehicle at any time - risk of accident!  
Fig. 160 Universal prepara-  
tion for the phone  
®
•
In the event of air transport, the Bluetooth function of the handsfree-  
system must be switched off by a specialist garage!  
Only one telephone mount* is factory-fitted. An adapter for the phone  
can be purchased from the Škoda original accessories.  
Caution  
Taking the mobile phone out of the adapter during the call can lead to interruption  
of the connection. When taking out the mobile phone, the connection to the  
factory-fitted antenna is interrupted, this reduces the quality of the transmitting  
and receiving signal. The charging of the mobile phone battery is also interrupted.  
Inserting the mobile phone with the adapter  
A
–
–
First of all push the adapter Ain the direction of arrow ⇒ fig. 160 up  
to the stop into the mount. Press the adapter slightly downwards, until  
it locks securely into position.  
Note  
A
Insert the mobile phone into the adapter A(as specified in manufac-  
®
•
Not valid for all mobile phones which enable a communication via Bluetooth  
You can ask at an authorised Škoda Service Partner if your telephone is compatible  
with the universal telephone preinstallation GSM II.  
.
turer's instructions).  
Communication 145  
®
telephone is connected to the handsfree-system via Bluetooth , this connection is  
interrupted.  
Removing the mobile phone with the adapter  
–
Press simultaneouly the side locks of the mount and remove the  
mobile phone and adapter ⇒ page 144, fig. 160.  
Adapter “Bluetooth only”  
For the adapters which are marked with the “Bluetooth only” logo, the complete  
communication between the telephone and the handsfree-system of your vehicle  
is carried out only with the help of the Bluetooth technology. If an adapter marked  
Operating telephone calls with the aid of the adapter*.  
®
in such a way is inserted in the telephone mount, it only serves for recharging the  
battery of the telephone and for transmitting the signal onto the outer vehicle  
aerial.  
Aside from the button PTT, the button SOS can be found on certain adapters  
⇒ fig. 162. This button is without function.  
Note  
The adapters illustrated are only prime examples.  
Fig. 161 Illustration image:  
Single-button adapter  
Fig. 162 Illustration image:  
Two-button adapter  
The voice control of the telephone is activated by pressing the button PTT (button  
push to talk) on the adapter ⇒ fig. 161 or ⇒ fig. 162.  
If you insert the adapter with the telephone in the telephone mount, the handsfree-  
system connects to the telephone by means of the interface of the adapter. If the  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
146 Communication  
Operation of the telephone on the multifunction steering wheel*  
The driver can set the basic functions of the telephone by simply operating the  
buttons located on the steering wheel so that he can concentrate on the traffic situ-  
ation without being distracted as little as possible by operating the telephone  
⇒ fig. 163.  
This applies only if your vehicle has been equipped with the telephone preinstalla-  
tion at the factory.  
If the side lights are switched on, the buttons on the multifunction steering wheel  
are illuminated.  
Fig. 163 Multifunction  
steering wheel: Control  
buttons for the telephone  
Overview of the different functions in contrast to the multifunction steering wheel  
without mobile phone operation ⇒ page 139.  
Button  
Action  
Operation  
Activation and deactivation of the voice control°  
(Button PTT - Push to talk)  
press briefly  
1
A
Increase volume  
Decrease volume  
turn upwards  
turn downwards  
press briefly  
1
A
1
A
Accept call, terminate call, entry in the main menu of the telephone, list of selected numbers  
2
A
press button for a long  
Reject call, entry in the main menu of the telephone, list of selected numbers  
2
A
time  
Reach one level higher in the menu (according to the current position in the menu)  
Return in the main menu of the information display  
press briefly  
3
A
press button for a long  
3
A
time  
press briefly  
Confirm menu selection  
4
A
press button for a long  
period of time  
Confirming the selected menu point, the following initial letters in the telephone book  
4
A
The last chosen menu selection, name  
The next menu selection, name  
turn upwards  
4
A
turn downwards  
4
A
Communication 147  
The buttons operate the functions for the operating mode of the current  
telephone.  
Voice commands  
Voice commands for mobile phone operation  
Voice command  
Operate the telephone via the information display*  
Activity  
On vehicles which are factory-fitted with a navigation system* with  
voice control, it is only possible to operate the voice control via the  
navigation system*. The description on how to operate the voice  
control can be found in the operating instructions of your navigation  
system*.  
After this command the PIN code of the mobile  
phone can be entered ⇒ page 148.  
ENTER PIN/PIN CODE  
DIAL NUMBER  
REDIAL  
After this command a telephone number can be  
entered which establishes a connection to the  
requested partner ⇒ page 148.  
After this command the last selected telephone  
number is selected again ⇒ page 149.  
If you select the menu point Telephone on the information display with the aid of  
4
the handwheel A, you can change to the following menus:  
„
„
„
„
Phone book  
Last calls  
Voice commands for operating the phone phone book  
Voice command  
SAVE/STORE  
Activity  
Received calls  
Missed calls  
After this command a name with its telephone  
NAMES/NAME/NUMBE number can be stored in the phone phone book  
R
⇒ page 149.  
Phone book  
In the menu point Phone book is the list of the loaded contacts from the telephone  
memory and the SIM card of the mobile phone. In the phone phonebook there are  
1500 free memory locations available.  
After this command a telephone number which was  
SELECT NAMES/NAME stored under its given name in the phone phone  
book can be selected ⇒ page 150.  
After this command a name in the phone phone  
DELETE NAMES/NAME  
book can be erased ⇒ page 150.  
Note  
The display of texts in the menu Telephone is only possible in German, English,  
French, Italian, Spanish and Czech.  
LISTEN TO/PLAY  
PHONEBOOK  
After this command you can listen-in to the phone  
phone book ⇒ page 151.  
After this command the complete phone book or a  
name can be erased ⇒ page 151.  
DELETE PHONEBOOK  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
148 Communication  
Other possible commands  
•
the mobile phone is switched on.  
The digits zero to nine are permitted. The system detects no continuous digit  
combinations such as twenty-three, but only individually spoken digits (two, three).  
After each order of digits (separation through brief voice pause) the detected digits  
are repeated.  
Voice command  
DIAL  
Activity  
The telephone number is selected.  
In addition to the name in the phone book, which is  
selected on the information display, a voice recording  
is stored to select with the help of the voice com-  
mands or the entered PIN code.  
Notes for entering the PIN code  
STORE  
•
When entering a PIN code with more than 8 digits, the system indicates “The  
PIN is too long”.  
When entering an incorrect PIN code, the system indicates “The PIN is incor-  
rect”.  
The entered name or the digits are repeated. Then the  
system requests with voice response “please pro-  
ceed” the entry of further digits or commands.  
•
REPEAT  
•
If the incorrect PIN code has been entered three times consecutively, the card  
The entered name or the last entered order of digits is  
erased. Previously entered groups of digits are  
repeated. Then the system requests with voice  
response “please proceed” the entry of further digits  
or commands.  
is blocked. With the aid of the personal unblocking code PUK (Personal Unblock  
Key), the SIM card can be unblocked. The unblocking code can only be entered  
via the phone keypad and not through the voice control.  
BACK  
Example for entering the PIN code  
All entered digits are erased. Then the system  
requests with voice response “The number is  
deleted. The number please” the entry of further  
digits or commands.  
Voice command  
Announcement  
DELETE  
ENTER PIN/PIN CODE  
e.g. ZERO ONE TWO THREE  
“The PIN please”.  
“Zero One Two Three”.  
CANCEL  
The dialogue is ended.  
If no entry is put in, the following announcement is made after about 5 seconds.  
“Possible commands are: store, repeat,  
correct, delete or more digits”.  
Enter PIN code  
“The PIN is saved”.  
(end of dialogue)  
STORE  
A PIN code must be entered before operating the system.  
–
–
Press the PTT button.  
You can interrupt the dialogue at any time by pressing the PTT button or with the  
voice command CANCEL.  
Give the command ENTER PIN/PIN CODE after the signal tone.  
After this command the PIN code can be entered.  
The entry of the PIN code is only possible if:  
Dial number  
•
•
the ignition is switched on,  
–
Press the PTT button.  
the mobile phone is in the mount,  
Communication 149  
After giving this command, the last number selected via voice input is selected  
–
Give the command DIAL NUMBER after the signal tone.  
again.  
After giving this command, the system requests the entry of a telephone number.  
The telephone number can be entered as an interconnected spoken row of digits  
(complete number), in the form of order of digits (separation through a brief voice  
pause) or through individually spoken digits. After each order of digits (separation  
through brief voice pause) the detected digits are repeated.  
Example of redial  
Voice command  
REDIAL  
Announcement  
“The number is being dialed”.  
The digits zero to nine are permitted. The system detects no continuous digit  
combinations such as twenty-three, but only individually spoken digits (two, three).  
You can interrupt the dialogue at any time by pressing the PTT button or with the  
voice command CANCEL.  
If you enter more than 20 digits, the system announces: “The number is too long”.  
Additionally for international calls a Plus (+) has to be entered in front of the 20  
digits.  
Phone voice phonebook*  
Example when entering a telephone number  
Store name  
Voice command  
Announcement  
–
–
Press the PTT button.  
DIAL NUMBER  
“The number please”.  
“Zero Six Zero Three”.  
Give the command SAVE/STORE NAMES/NAME/NUMBER after the  
signal tone.  
e.g. ZERO SIX ZERO THREE  
If no entry is put in, the following announcement is made after about 5 seconds.  
After giving this command, the system requests the entry of a name and a tele-  
phone number which should be stored in the phone voice phonebook. In the  
phone voice phonebook up to 50 entries can be stored.  
“Possible commands are: dial, repeat,  
correct, delete or more digits”.  
FIVE SEVEN TWO  
DIAL  
“Five Seven Two”.  
The telephone number can be entered as an interconnected spoken row of digits  
(complete number), in the form of order of digits (separation through a brief voice  
pause) or through individually spoken digits. After each order of digits (separation  
through brief voice pause) the detected digits are repeated.  
“The number is being dialed”.  
You can interrupt the dialogue at any time by pressing the PTT button or with the  
voice command CANCEL.  
The digits zero to nine are permitted. The system detects no continuous digit  
combinations such as twenty-three, but only individually spoken digits (two, three).  
Repeat last call  
If you enter more than 20 digits, the system announces: “The number is too long”.  
Additionally a Plus (+) has to be entered in front of the 20 digits.  
–
–
Press the PTT button.  
The stored entry is shown on the information display* with an asterisk in front of  
the name.  
Give the command REDIAL after the signal tone.  
For similar names additional information (e.g. first names) should be stored.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
150 Communication  
Example for storing in the phone voice phonebook  
Example for selecting an entry out of the phone voice phonebook  
Voice command  
Announcement  
Voice command  
Announcement  
“The name please”.  
“Company xyz”.  
SAVE/STORE  
NAMES/NAME/NUMBER  
SELECT NAMES/NAME  
COMPANY XYZ  
“The name please”.  
COMPANY XYZ  
“Please repeat the name”.  
“The number please”.  
“Zero One Two Three”.  
“Four Five Six”.  
If no entry is put in, the following announcement is made after about 5 seconds.  
COMPANY XYZ  
“Possible commands are: dial, repeat, correct”.  
ZERO ONE TWO THREE  
FOUR FIVE SIX  
DIAL  
“The number is being dialed”.  
You can interrupt the dialogue at any time by pressing the PTT button or with the  
voice command CANCEL.  
If no entry is put in, the following announcement is made after about 5 seconds.  
“Possible commands are: store, repeat, correct,  
delete or more digits”.  
Delete names  
STORE  
“The name COMPANY XYZ is stored”.  
–
–
Press the PTT button.  
You can interrupt the dialogue at any time by pressing the PTT button or with the  
voice command CANCEL.  
Give the command DELETE NAMES/NAME after the signal tone.  
After giving this command, there is the possibility to erase a stored entry in the  
phone voice phone book.  
Select name  
–
–
Press the PTT button.  
Example for erasing an entry out of the phone phonebook  
Give the command DIAL/SELECT NAMES/NAME after the signal  
Voice command  
Announcement  
tone.  
DELETE NAMES/NAME  
“The name please”.  
After giving this command, there is the possibility to select a stored entry out of the  
phone voice phonebook.  
“Do you want to delete the entry Company  
xyz?”.  
COMPANY XYZ  
YES  
“Delete?”.  
If no entry is put in, the following announcement is made after about 5 seconds.  
“Possible commands are: yes, no, repeat, cor-  
rect”.  
YES  
“The name is deleted”.  
Communication 151  
Example for erasing individual names out of the phone phonebook  
You can interrupt the dialogue at any time by pressing the PTT button or with the  
voice command CANCEL.  
Voice command  
Announcement  
If the user answers with NO, the system answers with “Cancel” and the dialogue is  
“Do you want to delete the whole  
phonebook?”  
ended.  
DELETE PHONEBOOK  
If no entry is put in, the following announcement is made after about 5 seconds.  
Delete voice phonebook  
“Possible commands are: yes, no,  
repeat”.  
–
–
Press the PTT button.  
NO  
The phonebook is read out.  
Give the command DELETE PHONEBOOK after the signal tone.  
When announcing the entry to be  
erased, press the PTT button.  
“Do you want to delete (name)?”  
After giving this command there is the possibility to erase the complete phone  
voice phone book or the individually stored names out of the phone phone book.  
If no entry is put in, the following announcement is made after about 5 seconds.  
Example for erasing the complete phonebook  
“Possible commands are: yes, no”.  
YES  
“The name is deleted”.  
Voice command  
Announcement  
Continue reading out the phone book.  
“Do you want to delete the whole  
phonebook?”.  
DELETE PHONEBOOK  
As long as the phonebook is read out, other entries can be erased by pressing the  
PTT button.  
If no entry is put in, the following announcement is made after about 5 seconds.  
“Possible commands are: yes, no,  
repeat”.  
You can end the dialogue at any time with the voice command CANCEL.  
YES  
YES  
“Are you sure?”.  
Listening-in to the phonebook  
“The phonebook is deleted”.  
–
–
Press the PTT button.  
You can interrupt the dialogue at any time by pressing the PTT button or with the  
voice command CANCEL.  
Give the command LISTEN TO/PLAY PHONEBOOK after the signal  
tone.  
After giving this command the phone voice phone book is read out by the system.  
By pressing the PTT button when announcing the desired name, the corresponding  
telephone number is being dialed; the system answers: “The number is being  
dialed”.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
152 Communication  
The dialogue is always automatically ended after carrying out an operation, e.g.  
after erasing the name from the phonebook.  
Universal telephone preinstallation GSM III*  
The dialogue of the incoming call is immediately interrupted and you can accept  
the call by pressing the button .  
Introduction  
This enables you to make full use of the advantages of a normal carphone (“hands-  
free system” using a microphone integrated in the vehicle, optimal transmission of  
signals using an external aerial etc.). The equipment includes also the voice control.  
The telephone is connected using the rSAP profile - Remote SIM access profile  
(telecommunication of the SIM data) by means of Bluetooth technology, if your  
telephone supports this profile. The equipment includes the following functions:  
If a voice command is not detected, the system answers with “Sorry?” and a new  
entry can be performed. After the 2nd error the system repeats the aid. After the 3rd  
error the answer “Cancel” is given and the dialogue is ended.  
®
Optimum understanding of the voice commands depends on the following  
factors:  
•
Speak with a normal tone of voice without intonation and excessive voice  
pauses.  
•
•
•
•
Display of the SMS text in the information display.  
Free talking in the vehicle interior.  
•
•
Avoid insufficient articulation.  
Close the doors, windows and sliding roof, in order to reduce or stop disturbing  
MUTE signal to the radio.  
Voice control (with the set-up possibility for “short and long dialogue”,  
depending on the user's knowledge of the operating structure).  
exterior noise.  
•
It is recommended to speak louder at higher speeds, so that the tone of your  
• Convenience mode with the multifunction steering wheel and the display in the  
information display.  
Handsfree-system.  
voice is louder than the increased surrounding noise.  
•
During the dialogue avoid additional noise in the vehicle, e.g. simultaneously  
•
talking occupants.  
The voice control of the telephone is activated by pressing the button PTT on the  
multifunction steering wheel ⇒ page 154, fig. 164.  
•
•
Do not speak, if the system makes an announcement.  
The microphone for voice control is inserted in the moulded headliner and  
directed to the driver and front passenger. Therefore the driver and the front  
passenger can operate the equipment.  
A phone phonebook is part of the universal telephone preinstallation GSM III with  
voice control. In the phone phonebook there are 1000 free memory locations avail-  
able. This phone phonebook is independent of the appliance used for the mobile  
phone.  
WARNING  
The volume can be changed at any time with the set button of the radio* or with the  
function keys on the multifunction steering wheel*.  
Pay attention primarily to the traffic situation! As the driver you are fully  
responsible for road safety. Use the telephone system only to such an extent,  
so that you are in full control of your vehicle at any time.  
Dialogue  
The period, in which the telephone system is ready to receive voice commands and  
carry out the voice commands, is called DIALOGUE. The system gives audible feed-  
back and guides you if necessary through the relevant functions. You can start or  
end the dialogue at any time by pressing the PTT button.  
Note  
•
Should you have any questions, please contact an authorised Škoda Service  
Partner.  
Communication 153  
•
Please also refer to the additional instructions ⇒ page 142, “Mobile phones  
and two-way radio systems”.  
–
To download the telephone book and the indentification data of the  
SIM card into the new control unit, confirm again the command rSAP  
in your mobile phone. The system reads the telephone book.  
®
Bluetooth  
If you do not want to confirm the command rSAP during each connection of the  
telephone to the control unit, then you must carry out in the menu of the mobile  
phone an authorization using the control unit.  
The equipment enables the wireless connection to the control unit of a  
telephone with Bluetooth function which supports the rSAP profile.  
®
The telephone deregisters from the GSM network and only the control unit ensures  
the communication with the network. In the telephone only the interface for Blue-  
Process of connection  
®
tooth remains active. In this case, you can only select to separate from the device,  
®
–
–
Switch on the ignition.  
switch off the Bluetooth connection or the number of the emergency call 112.  
®
If the PIN was stored, an automatic selection and connection of the telephone take  
place the next time the ignition is switched. Check on your mobile phone if the  
automatic connection was established.  
If you have not switched on Bluetooth on your telephone, switch it  
on.  
–
–
For certain mobile phones it is necessary to switch on first the rSAP  
function.  
Connection terminated  
®
The connection of the handsfree-system is terminated by means of Bluetooth  
:
Press the button on the multifunction steering wheel and select  
device search. The system searches mobile devices and shows these  
in the information display*.  
•
When removing the key from the ignition lock (during a telephone call, the  
connection is disconnected).  
®
•
•
By switching off the Bluetooth in the mobile phone.  
By selecting “separate telephone” in the menu of the mobile phone.  
–
–
Select your telephone in the information display by turning the hand-  
wheel and select it by pressing the handwheel.  
On vehicles which are fitted out with radio or navigation at the factory, it is possible  
Within 30 seconds enter in your telephone the 16 digit PIN of your  
control unit, which is indicated in the information display* and  
confirm it according to the instructions on the display of your tele-  
phone.  
to terminate the telephone call after removing the key from the ignition lock by  
pressing the icon on the touch-screen of the radio  
ating instructions for radio or for navigation.  
17)  
or the navigation, see oper-  
WARNING  
–
–
If your SIM card is blocked by a PIN code, enter the PIN of the SIM card  
of your telephone. The telephone connects to the control unit (during  
the first connection you can only select in the information display*  
and when the vehicle is stationary, if the PIN should be stored).  
•
Pay attention primarily to the traffic situation! As the driver you are fully  
responsible for road safety. Use the telephone system only to such an extent,  
so that you are in full control of your vehicle at any time - risk of accident!  
®
•
In the event of air transport, the Bluetooth function of the handsfree-  
system must be switched off by a specialist garage!  
For the first storage of a new user follow the instructions in the infor-  
mation display.  
17)  
Does not apply for Radio Swing.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
154 Communication  
Note  
•
If the telephone book of the mobile phone contains more than 1 000 entries,  
the system announces a failure while loading the telephone book.  
When connecting to the control unit, follow the instructions on your mobile  
phone.  
Note that the range of the Bluetooth connection to the handsfree-system is  
•
In the memory of the control unit, up to three users can be stored, whereby the  
handsfree-system can only communicate actively with one user. In the case of  
mutual connection with a fourth mobile phone, you must erase one user.  
•
®
•
®
•
Not valid for all mobile phones which enable a communication via Bluetooth  
You can ask at an authorised Škoda Service Partner if your telephone is compatible  
with the universal telephone preinstallation GSM II.  
.
optimized in the vehicle interior. The range is dependent on local factors, e.g.  
obstacles between the devices and interferences with other devices.  
Operation of the telephone on the multifunction steering wheel*  
Fig. 164 Multifunction  
steering wheel: Control  
buttons for the telephone  
The driver can set the basic functions of the telephone by simply operating the  
buttons located on the steering wheel so that he can concentrate on the traffic situ-  
ation without being distracted as little as possible by operating the telephone  
⇒ fig. 164.  
This applies only if your vehicle has been equipped with the telephone preinstalla-  
tion at the factory.  
If the side lights are switched on, the buttons on the multifunction steering wheel  
are illuminated.  
Overview of the different functions in contrast to the multifunction steering wheel  
without mobile phone operation ⇒ page 139.  
Communication 155  
Button  
Action  
Operation  
press briefly  
1
A
Activation and deactivation of the voice control°  
(Button PTT - Push to talk)  
press button for a long  
period of time  
1
A
Increase volume  
Decrease volume  
turn upwards  
turn downwards  
press briefly  
1
A
1
A
Accept call, terminate call, entry in the main menu of the telephone, list of selected numbers  
Reject call, list of the last calls, entry in the main menu of the telephone, list of selected numbers  
2
A
press button for a long  
2
A
time  
Reach one level higher in the menu (according to the current position in the menu)  
Return in the main menu of the information display  
press briefly  
3
A
press button for a long  
3
A
time  
press briefly  
4
A
Confirm menu selection  
press button for a long  
period of time  
4
A
The last chosen menu selection, name  
The next menu selection, name  
turn upwards  
turn downwards  
4
A
4
A
To the previous initial letter in the telephone book  
To the next initial letter in the telephone book  
quickly turn upwards  
quickly turn downwards  
4
A
4
A
The buttons operate the functions for the operating mode of the current  
telephone.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
156 Communication  
Call register  
Operate the telephone via the information display*  
In the menu point Call register, you can select the following menu points:  
„
„
„
„
Missed calls  
Received calls  
Last calls  
Delete lists  
Voice mailbox  
In the menu point Voice mailbox there is a list of messages from the missed calls.  
Messages  
Fig. 165 Information  
display: Menu telephone  
In the menu point Messages there is a list of received text messages.  
Bluetooth  
If you select the menu point Telephone on the information display with the aid of  
In the menu Bluetooth you can select the following menu points:  
4
the handwheel A, you can change to the following menus:  
„
„
„
„
User - the overview of the stored users  
„
„
„
„
„
„
„
„
Phone book  
Dial number  
Call register  
Voice mailbox  
Messages  
Bluetooth  
Settings  
New user - Search for users who are in the reception range  
Visibility - Switching on the visibility of the telephone unit for other devices  
Extras  
„
Headset  
Modem  
„
„
Phone name - the possibility to change the name of the telephone unit (pre-  
set SKODA-rSAP)  
Back  
Settings  
Phone book  
In the menu Settings you can select the following menu points:  
In the menu point Phone book is the list of the loaded contacts from the telephone  
memory and the SIM card of the mobile phone. In the phone phonebook there are  
1000 free memory locations available.  
„
Phone book  
„
Update  
„
Select memory  
Dial number  
„
„
„
SIM & phone (SIM & Mobile phone)  
SIM card  
In the menu point Dial number, you can write any telephone number. Select in  
sequence the desired digits with the aid of the handwheel and confirm it by  
pressing the handwheel. You can select the numbers 0 - 9, the symbols *, # and the  
functions Delete, Call, Cancel.  
Mobile phone  
Communication 157  
„
List  
„
Voice commands  
Surname  
Voice commands for operating the telephone control unit  
„
First name  
„
„
Own no. send - the possibility to suppress one's own number on the unit called  
Voice command  
HELP  
Activity  
Signal settings  
After this command the system repeats all possible  
commands.  
„
Ring tone  
Volume  
„
LONG DIALOGUE  
SHORT DIALOGUE  
Help is not reduced (suitable for beginners).  
„
Phone settings  
Help is clearly reduced (good operating knowledge  
provided).  
„
„
Select operator  
„
Automatic  
Manual  
After this command a name can be entered which  
establishes a connection to the requested partner  
⇒ page 158.  
„
CALL NAME  
Off time  
„
+ 5 Minutes  
- 5 Minutes  
After this command a phone number can be entered  
which establishes a connection to the requested  
party.  
DIAL NUMBER  
„
„
„
GPRS - Setting of the access point of the user  
After this command the system selects the last  
selected number.  
Switch off ph. - switching off the telephone unit (telephone remains  
REDIAL  
connected)  
Other possible commands  
Back  
Return in the main menu of the information display.  
Voice command  
CALLS (SELECT)  
Activity  
The telephone number is selected.  
Note  
The entered name or the digits are repeated. Then  
the system requests with voice response “please  
proceed” the entry of further digits or commands.  
The readout of the menu Telephone and the voice control are not possible in the  
Russian and Chinese language.  
REPEAT  
The entered name or the last entered order of digits is  
erased. Previously entered groups of digits are  
repeated. Then the system requests with voice  
response “and proceed?” the entry of further digits  
or commands.  
BACK  
DELETE  
CANCEL  
All entered digits are erased.  
The dialogue is ended.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
158 Communication  
Example for storing the recording in the phone voice phonebook  
Phone voice phonebook*  
Voice command  
STORE NAME  
Name XYZ  
Announcement  
Store name  
“The name please”  
“Please repeat the name”  
“The name XYZ is stored”  
–
–
Press the button .  
Name XYZ  
In the menu telephone, select the menu point Phone book and in this  
menu point, select a contact of which you want to record a voice  
You can interrupt the dialogue at any time by pressing the PTT button or with the  
voice command CANCEL.  
4
recording and confirm it with the handwheel A⇒ page 154, fig. 164.  
–
–
–
–
Select the menu point Record and afterwards Recording.  
The system gives the command “Store name, name please”.  
Pronounce the name, e. g “Name XYZ”, the system repeats the name.  
The system gives the notice “Name stored”.  
Select name  
1
–
–
Press the button PTT A ⇒ page 154, fig. 164.  
Give the command CALL NAME after the signal tone.  
In the case that the system does not understand the spoken name, it gives the  
notice “Pardon?”, “Please repeat the name”, “The name is too short” or “The  
name is too long”.  
After giving this command, the system requests the entry of the name to be called.  
Example for selecting the name  
In the phone voice phonebook up to 15 entries can be stored.  
Voice command  
CALL NAME  
Announcement  
For similar names additional information (e.g. first names) should be stored.  
“Call name”  
Voice commands for operating the phone voice phone book  
Name XYZ  
“Do you want to call XYZ?”  
“The name is being dialed”  
Voice command  
Activity  
CALLS (SELECT)  
LISTEN TO ALL THE  
NAMES  
After this command the control unit repeats all stored  
names.  
In the case that the list is empty, the message “The name list is empty, main  
menu” sounds.  
After this command, you can enter a name which you  
would like to erase from the internal phone voice  
phonebook.  
If the system does not recognize the name called, it asks you to repeat using the  
command “Pardon?”. If the system does not recognize the name to be called after  
repeating, the message sounds “The name does not exist. You receive the  
current name list with LISTEN TO ALL THE NAMES, main menu”.  
DELETE NAME  
After this command, you can erase the complete list  
of the stored names.  
DELETE ALL NAMES  
You can interrupt the dialogue at any time by pressing the PTT button or with the  
voice command CANCEL.  
Communication 159  
Example for erasing an entry out of the phone voice phonebook  
Listening-in to the voice phonebook  
Voice command  
DELETE NAME  
Name XYZ  
YES  
Announcement  
–
–
Press the PTT button.  
“The name please”  
Give the command LISTEN TO ALL THE NAMES after the signal tone.  
“Do you want to erase XYZ?”  
“The name is deleted”  
After giving this command, all voice recordings are replayed from the list of the  
control unit. By pressing the PTT button when announcing the desired name, the  
corresponding telephone number is being dialed; the system answers: “The  
number is being dialed”.  
You can interrupt the dialogue at any time by pressing the PTT button or with the  
voice command CANCEL.  
If the user answers with NO, the system answers with “Cancel” and the dialogue is  
Example for selecting the name  
ended.  
Voice command  
Announcement  
LISTEN TO ALL THE NAMES  
“Interrupt using the voice button”  
Erase the complete phone voice phonebook  
In the case that the list is empty, the system announces “The name list is empty”.  
–
–
Press the PTT button.  
You can interrupt the dialogue at any time by pressing the PTT button or with the  
voice command CANCEL.  
Give the command DELETE PHONEBOOK after the signal tone.  
After replaying the complete list, the system announces “End of name list”.  
After giving this command, there is the possibility to erase the complete phone  
voice phonebook.  
Erase entries out of the phone voice phonebook  
Example for erasing the complete phone voice phonebook  
Voice command  
Announcement  
–
–
Press the PTT button.  
“Do you want to delete all the  
names?”  
Give the command ERASE NAME after the signal tone.  
DELETE ALL NAMES  
After giving this command, there is the possibility to erase a stored entry in the  
phone voice phonebook.  
YES  
YES  
“Are you sure?”  
“All the names are deleted”  
You can interrupt the dialogue at any time by pressing the PTT button or with the  
voice command CANCEL.  
If the user answers with NO, the system answers with “Cancel” and the dialogue is  
ended.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
160 Communication  
Loading a CD  
Inputs AUX-IN* and MDI*  
C
–
Touch the button A and guide the CD (compact disc) into the CD-  
The input AUX-IN is located below the armrest* of the front seats and is marked  
with .  
B
case A. The CD is automatically loaded onto the next free position in  
D
the CD-changer. The LED in the corresponding button A stops  
flashing.  
The input MDI is located in the storage compartment on the front passenger side.  
The inputs AUX-IN and MDI connect the external audio sources (e.g. iPod or mp3  
player) and record music from these devices via your radio* or navigation system*  
installed in the factory.  
Load CDs  
C
–
Hold the button A pressed and guide the CDs one after the other  
(maximum 6 CDs) into the CD case A. The LEDs in the buttons A  
B
D
The description of the operation can be found in the relevant Owner's Manual of  
your radio* or your navigation*.  
are no longer flashing.  
Loading a CD to one definite position  
Note  
C
D
–
Touch button A. The LEDs in the buttons A light up at the memory  
•
The loudspeakers in the vehicle are matched to a power output of the radio and  
navigation system of 4x 20°W.  
For the equipment sound system*, the loudspeakers are matched to a power  
spaces, which are already assigned and flash in the case of free  
memory spaces.  
•
D
B
–
Touch the desired button A and guide the CD into the CD-case A.  
output of the amplifier of 4x40°W + 6x20 W.  
Ejecting a CD  
CD changer*  
A
–
Touch the button A, in order to eject a CD. For assigned memory  
D
spaces, now the LEDs light up in the buttons A.  
D
–
Touch the corresponding button A. The CD is ejected.  
Ejecting all CDs  
A
–
Hold the button Apressed for more than 2 seconds, in order to eject  
the CDs. All CDs in the CD-changer are ejected consecutively.  
Note  
B
•
Always guide the CD into the CD-case A with the printed side pointing  
upwards.  
Fig. 166 The CD changer  
•
Never push the CD with force into the CD-case as the insertion is performed  
automatically.  
The CD changer for the radio and navigation system is located in the right  
side compartment of the luggage compartment.  
Communication 161  
•
After loading a CD into the CD-changer, you must wait until the LED of the  
D
B
corresponding button A lights up. Then the CD-case A is free to load the next  
CD.  
•
If you have selected a position, on which a CD is already located, this CD will be  
ejected. Take out the ejected CD and load the desired CD.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
162 Communication  

Related Topics

Using the system
Cockpit The brief instruction Basic functions and important information Instruments and Indicator/Warning Lights General view of the instrument cluster Engine revolutions counter Speedometer Coolant temperature gauge Fuel gauge Counter for distance driven Service Interval Display Digital clock Multi-functional indicator (onboard computer)* Information display* Auto Check Control* Warning lights Unlocking and locking Key Changing the battery of the radio remote control Electronic immobiliser Child safety lock Central locking system Remote control* Synchonisation of the remote control Anti-theft alarm system* Power windows* Electric sliding/tilting roof* Lights and Visibility Lights Interior lighting Visibility Windshield wiper and wash system Rear-view mirror Seats and Stowage Front seats Adjusting front seats electrically* Head restraints Middle rear head restraint Rear seats Pedals luggage compartment Net partition (Combi)* The roof rack* Cup holder Note holder Ashtray* Cigarette lighter*, power sockets Storage compartments Overview Storage compartment on the front passenger side Cooling of storage compartment on front passenger side* Storage compartment on the driver's side Storage compartment on the dash panel* Storage compartment in front centre console* Storage net on the front centre console* Storage compartment for spectacles* Storage compartment in the front doors Storage compartment below front passenger seat* Front seat armrest with storage compartment* Rear seat armrest with storage compartment* Storage compartment in rear centre console* Seat backrest with opening for skis* Through-loading bag (Unibag)* Side compartment* Storage compartment behind the rear seats* (Combi) Clothes hooks* Heating and air conditioning system Air outlet vents Heating Climatic* (semi-automatic air conditioning system) Climatronic* (automatic air conditioning) Auxiliary heating (auxiliary heating and ventilation)* Starting-off and Driving Setting steering wheel position Ignition lock Starting the engine Switching off the engine Shifting (manual gearbox) Handbrake Rear parking aid* Front and rear parking aid* Cruise control system (CCS)* Automatic gearbox Automatic gearbox* Multifunction steering wheel* Mobile phones and two-way radio systems Universal telephone preinstallation GSM II* Universal telephone preinstallation GSM III* Phone voice phonebook* Inputs AUX-IN* and MDI* CD changer*

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot