Communication 149
After giving this command, the last number selected via voice input is selected
–
Give the command DIAL NUMBER after the signal tone.
again.
After giving this command, the system requests the entry of a telephone number.
The telephone number can be entered as an interconnected spoken row of digits
(complete number), in the form of order of digits (separation through a brief voice
pause) or through individually spoken digits. After each order of digits (separation
through brief voice pause) the detected digits are repeated.
Example of redial
Voice command
REDIAL
Announcement
“The number is being dialed”.
The digits zero to nine are permitted. The system detects no continuous digit
combinations such as twenty-three, but only individually spoken digits (two, three).
You can interrupt the dialogue at any time by pressing the PTT button or with the
voice command CANCEL.
If you enter more than 20 digits, the system announces: “The number is too long”.
Additionally for international calls a Plus (+) has to be entered in front of the 20
digits.
Phone voice phonebook*
Example when entering a telephone number
Store name
Voice command
Announcement
–
–
Press the PTT button.
DIAL NUMBER
“The number please”.
“Zero Six Zero Three”.
Give the command SAVE/STORE NAMES/NAME/NUMBER after the
signal tone.
e.g. ZERO SIX ZERO THREE
If no entry is put in, the following announcement is made after about 5 seconds.
After giving this command, the system requests the entry of a name and a tele-
phone number which should be stored in the phone voice phonebook. In the
phone voice phonebook up to 50 entries can be stored.
“Possible commands are: dial, repeat,
correct, delete or more digits”.
FIVE SEVEN TWO
DIAL
“Five Seven Two”.
The telephone number can be entered as an interconnected spoken row of digits
(complete number), in the form of order of digits (separation through a brief voice
pause) or through individually spoken digits. After each order of digits (separation
through brief voice pause) the detected digits are repeated.
“The number is being dialed”.
You can interrupt the dialogue at any time by pressing the PTT button or with the
voice command CANCEL.
The digits zero to nine are permitted. The system detects no continuous digit
combinations such as twenty-three, but only individually spoken digits (two, three).
Repeat last call
If you enter more than 20 digits, the system announces: “The number is too long”.
Additionally a Plus (+) has to be entered in front of the 20 digits.
–
–
Press the PTT button.
The stored entry is shown on the information display* with an asterisk in front of
the name.
Give the command REDIAL after the signal tone.
For similar names additional information (e.g. first names) should be stored.
Using the system
Safety
Driving Tips
General Maintenance
Breakdown assistance
Technical Data
English 
