92 Seats and Stowage
–
–
In the same way, fix the cross rod to the other side of the vehicle,
Use the net partition behind the front seats
C
mount A.
Fold the storage compartment cover downwards.
Folding
–
–
–
–
Fold down the storage compartment cover behind the rear seats
⇒ fig. 104.
Pull the cross rod back slightly, first on the one side then on the other
C
side and take the cross rod out of the mount A ⇒ fig. 105.
Fig. 106 Unrolling net parti-
tion
Hold the cross rod in such a way that the net partition can roll up
B
slowly and without damage into housing A.
Fold the storage compartment cover downwards.
Pulling out
–
–
Fold the rear seats forwards ⇒ page 81
If you wish to use the entire luggage compartment, you can remove the luggage
compartment cover ⇒ page 89, fig. 99.
A
B
Pull the net partiton net at the plate A out of the housing A
⇒ fig. 106.
WARNING
C
–
–
Insert the cross rod into the mount A first on the one side and push
the cross rod forward.
C
•
First check for yourself that the cross road is inserted into the mounts A
in the front position!
Pay attention that the rear seat backrest is correctly interlocked. It is only
then that the three-point seat belt for the middle seat can reliably fulfil its
function.
In the same way, fix the cross rod to the other side of the vehicle,
•
C
mount A.
Folding
–
–
–
Pull the cross rod back slightly, first on the one side then on the other
C
side and take the cross rod out of the mount A ⇒ fig. 106.
Hold the cross rod in such a way that the net partition can roll up
B
slowly and without damage into housing A.
Fold the rear seats back into its original position.
English 
