Get Using the system -> Auto Check Control* Guide for Skoda Octavia 4 Door Second Generation (2004-2012)

28 Instruments and Indicator/Warning Lights

which door is still open or whether the luggage compartment door or bonnet is not

closed ⇒ fig. 30.

Shown in the menu Vehicle status, if there is at least one error message. After

selecting this menu the first of the error messages is displayed. Several error

messages are shown on the display under the message e.°g. 1/3 ⇒ fig. 31. This

indicates that the first of a total of three error messages is displayed. The respective

messages are displayed one after the other in an interval of 5 seconds. Check as

soon as possible the displayed error messages.

The symbol goes out as soon as the doors, luggage compartment door and bonnet

are completely closed.

A warning signal sounds if the car is driven at a speed of more than 6km/hour and

if the engine or the luggage compartment door is open.

As long as the operational faults are not rectified, the symbols are always indicated

again. After the first display, the symbols are indicated without information for the

driver.

Auto Check Control*

If a fault occurs, a warning signal will also sound in addition to the symbol and text

in the display:

Car state

•

Priority 1 - three warning signals

Priority 2 - one warning signal

Red symbols

A red symbol signals danger.

Fig. 31 Information display:

Display of operational fault

The Auto Check Control carries out a check of certain functions and vehicle compo-

nents. The check is performed constantly when the ignition is switched on, both

when the vehicle is stationary, as well as when driving.

Fig. 32 Information display:

Oil pressure is low

Some operational faults, urgent repairs, service work or other information appear

in the display of the instrument cluster. The displays are shown with a red or yellow

light symbol depending on the priority of the message.

–

Stop the vehicle.

The red symbols indicate danger (priority 1) while the yellow symbols indicate a

warning (priortity 2). Information for the driver may also appear in addition to the

symbols ⇒ page 31.

Switch the engine off.

Investigate the function indicated.

Obtain professional assistance.

Instruments and Indicator/Warning Lights 29

Meaning of the red symbols:

Engine oil pressure too low

Set-up

⇒ page 35



Three successive warning signals will sound if a red symbol appears.

Yellow symbols

Fig. 34 Setting the clock

You can change certain settings by means of the information display. The current

setting is shown on the information display in the respective menu at the top below

the line ⇒ fig. 34.

You can select the following information (depending on the equipment installed on

the vehicle):

Fig. 33 Information display:

Brake pad worn

•

MFD Data (MFA DATA)

Convenience

Check the relevant function as soon as possible.

The meaning of the yellow symbols:

Lights & Vision (Lights & Vision)

Time

Winter tyres

Check engine oil level,

engine oil sensor faulty

⇒ page 40

⇒ page 39



Language

Units

Brake pad worn



Assistant (Assistant)

Alternative speed displayed (Second speed)

Travel mode

One warning signal will sound if a yellow symbol appears.

If several operational faults of priority 2 exist, the symbols appear one after the

other and are each illuminated for about 5 seconds.

Service Interval (Service)

Factory Setting

Back

Using the system

Safety

Driving Tips

General Maintenance

Breakdown assistance

Technical Data

30 Instruments and Indicator/Warning Lights

After selecting the menu point Back you will reach one level higher in the menu.

Lights and Visibility

Here you can set how long the light should stay on for the function Coming/Leaving

Home and the intensity of the footwell lighting. Furthermore you can here switch

on or off the function daylight driving lights and convenience turn signal.

Displays of the MFA

Here you can switch off or on certain displays of the multi-functional indicator.

After selecting the menu point Factory setting the factory setting is established

Comfort*

again.

You can set the following functions (depending on the equipment installed on the

vehicle):

Time

Here you can set the time, the time format (12 or 24 hour indicator) and the time

change summer/winter time.

On vehicles with rain sensor you can switch on or off the

function for automatic closing of the windows and the

Rain closing

sliding/tilting roof in case of rain and locked vehicle. If it

is not raining and the function is set, the windows

including the sliding/tilting roof are closed automatically

after approx. 12 hours.

Winter tyres

Here you can set at which speed a warning signal should sound. This function is

used for e.g winter tyres with the permissible maximum speed less than the

maximum speed of the vehicle.

Door open

ATA confirm

Window op.

Mirror down

Mirror adjust.

Here you can switch on or off the functions for opening

a single door and automatic closing.

When exceeding the speed, the following is displayed on the information display*:

Snow tyres max. speed ... km/h (Winter tyres maximum ... km/h)

Here you can set if a signal tone should sound addition-

ally when activating or deactivating the anti-theft alarm

system .

Language

Here you can set in which language the warning and information texts should be

displayed.

Here you can set the convenience mode only for the

driver window or for all the windows.

Measures

Here you can switch on or off the function for mirror

lowering on the front passenger side when engaging the

Here you can set the units for temperature, consumption and distance driven.

reverse gear

Assistant

Here you can adjust the tones of the acoustic signals of the parking aid*.

Here you can switch on or off the function for left and

right exterior mirror adjustment simultaneously.

Second speed

After selecting this menu the convenience setting is

reset to factory setting. The following is displayed in the

information display:

Here you can switch on the display of the second speed in mph or in km/h

Factory setting

Travel mode

Factory setting for convenience is set

Here you can activate / deactivate the mode “tourist light”. This mode makes it

possible to drive in countries with opposing traffic system, driving on the left/right,

This function is only available on vehicles with an electrically adjustable driver seat.

Valid for countries where the values are indicated in British measuring units.

Using the system -> Auto Check Control* for Your Skoda Octavia 4 Door Second Generation (2004-2012)

Related Topics

Popular Owner Manuals

Latest Owner Manuals