2026 Subaru Outback SUV Instruments and Controls User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Instruments and Controls for Your Subaru Outback SUV Seventh Generation (2026)

(155,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
s03
3-1. Push-Button Ignition Switch ......................................................156
Safety Precautions...................................................................... 156
Operating Range for Push-Button Start System ........................... 156
Switching Power Status .............................................................. 156
When Access Key Fob Does Not Operate Properly ...................... 157
3-2. Hazard Warning Flasher .............................................................158
3-3. Meters and Gauges.....................................................................158
Speedometer .............................................................................. 158
Tachometer................................................................................. 158
Odometer.................................................................................... 158
Double Trip Meter ....................................................................... 159
Fuel Gauge and Driving Range on Remaining Fuel ...................... 159
Engine Coolant Temperature Gauge ............................................ 160
Instrument Cluster Settings......................................................... 160
3-4. Illumination Brightness Control.................................................161
Auto Dimmer Cancel Function..................................................... 161
3-5. Warning and Indicator Lights ....................................................162
Seatbelt Warning Light and Chime .............................................. 163
SRS Airbag System Warning Light .............................................. 165
Front Passenger’s Frontal Airbag ON and OFF Indicator Lights ... 166
CHECK ENGINE Warning Light/Malfunction Indicator Light .......... 166
Coolant Temperature Low Indicator Light (Blue)/Coolant
Temperature High Warning Light (Red) ...................................... 167
Charge Warning Light ................................................................. 168
Oil Pressure Warning Light ......................................................... 168
Engine Low Oil Level Warning Light............................................ 168
AT OIL TEMP Warning Light ........................................................ 169
Low Tire Pressure Warning Light (Except for Canada-Spec.
Models)..................................................................................... 169
ABS Warning Light ..................................................................... 170
Brake System Warning Light ....................................................... 171
Electronic Parking Brake Indicator Light...................................... 172
Auto Vehicle Hold Indicator Light ................................................ 173
Low Fuel Warning Light .............................................................. 174
Door Open Indicator Light........................................................... 174
Engine Hood Open Warning Light ............................................... 174
Windshield Washer Fluid Warning Light ...................................... 174
All-Wheel Drive Warning Light..................................................... 174
Power Steering Warning Light ..................................................... 174
Vehicle Dynamics Control Warning Light/Vehicle Dynamics
Control Operation Indicator Light .............................................. 175
Vehicle Dynamics Control OFF Indicator Light............................. 176
Warning Chimes and Warning Indicator of the Keyless Access
with Push-Button Start System.................................................. 176
Security Indicator Light............................................................... 180
Select Lever/Gear Position Indicator............................................ 180
Turn Signal Indicator Lights ........................................................ 180
High Beam Indicator Light........................................................... 181
High Beam Assist Indicator......................................................... 181
INSTRUMENTS AND CONTROLS
3
(156,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
LED Headlight Warning Light ...................................................... 181
Steering Responsive Headlight OFF Indicator Light ..................... 181
Steering Responsive Headlight Warning Light ............................. 181
Headlight Indicator Light ............................................................. 181
Front Fog Light Indicator Light.................................................... 181
Auto Start Stop Warning Light (Yellow)........................................ 181
Auto Start Stop OFF Indicator Light ............................................ 181
Auto Start Stop Indicator Light (Green) ....................................... 182
Auto Start Stop No Activity Detected Indicator Light.................... 182
Electric Damper System Warning Light (If Equipped) ................... 182
X-MODE Indicator ....................................................................... 182
Vehicle Detected in Neighboring Lane Indicator........................... 182
Hill Descent Control Indicator Light............................................. 183
BSW/RCTW Warning Indicator..................................................... 183
BSW/RCTW OFF Indicator ........................................................... 183
Icy Road Surface Warning Indicator ............................................ 183
RAB Warning Indicator................................................................ 183
RAB OFF Indicator...................................................................... 183
Proximity Warning Detection OFF Indicator ................................. 184
Distraction Mitigation System Operation Indicator Light
(Green) ..................................................................................... 184
Distraction Mitigation System Warning Light (Yellow) .................. 184
Distraction Mitigation System OFF Indicator Light ....................... 184
Distraction Mitigation System Temporary Stop Indicator Light ..... 184
Front Cross Traffic Braking Warning Indicator (If Equipped) ........ 184
Front Cross Traffic Braking OFF Indicator (If Equipped)............... 184
3-6. Instrument Cluster Display ........................................................185
Basic Operation .......................................................................... 187
Instrument Cluster Display Mode................................................. 188
Welcome Screen (Opening Animation) and Good-Bye Screen
(Ending Animation) ................................................................... 189
Warning Screen .......................................................................... 189
Meter Information Screen ............................................................ 189
Telltale Screen ............................................................................ 190
Basic Screens............................................................................. 191
Digital Speed Screen................................................................... 193
3-7. Center Information Display (CID) Features...............................194
Welcome Screen and Good-Bye Screen....................................... 194
Touch Screen Operations ............................................................ 195
3-8. Center Information Display ........................................................197
HOME Icon ................................................................................. 198
Outside Temperature and Clock .................................................. 198
Information Bar........................................................................... 198
Status Bar................................................................................... 198
Driver Profile Icon ....................................................................... 198
How to Change the Screen Settings ............................................ 199
Shortcut Icons ............................................................................ 199
Setting........................................................................................ 200
INSTRUMENTS AND CONTROLS
(157,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
3-9. Clock ............................................................................................210
Setting the Clock Manually.......................................................... 210
Setting the Clock Automatically................................................... 210
Setting 12-Hour Display/24-Hour Display ..................................... 211
3-10. Valet Mode ................................................................................... 211
Activation of Valet Mode ............................................................. 211
Deactivation of Valet Mode.......................................................... 212
Change the Passcode ................................................................. 212
3-11. Light Control Switch...................................................................212
Headlights .................................................................................. 213
High/Low Beam Change (Dimmer) ............................................... 215
Headlight Flasher........................................................................ 215
High Beam Assist Function......................................................... 215
Daytime Running Light System ................................................... 218
3-12. Steering Responsive Headlight (SRH) ......................................219
3-13. Front Fog Light Switch...............................................................220
3-14. Turn Signal Lever........................................................................221
One-Touch Lane Changer............................................................ 221
3-15. Wiper and Washer.......................................................................221
Windshield Wiper and Washer Switches ...................................... 223
Rear Window Wiper and Washer Switch ...................................... 225
3-16. Defogger and Deicer...................................................................226
3-17. Mirrors .........................................................................................228
Inside Mirror (without Auto-Dimming Function) (If Equipped) ....... 228
Auto-Dimming Mirror/Compass (If Equipped)............................... 228
Auto-Dimming Mirror/Compass with HomeLink
®
(If Equipped) ...... 229
Smart Rearview Mirror/Compass with HomeLink
®
(If Equipped).... 235
Outside Mirrors........................................................................... 245
3-18. Tilt/Telescopic Steering Wheel...................................................249
3-19. Heated Steering Wheel System (If Equipped)...........................249
3-20. Horn .............................................................................................250
INSTRUMENTS AND CONTROLS
3
(158,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
3-1. PUSH-BUTTON IGNI-
TION SWITCH
s03bg
SAFETY PRECAUTIONS
s03bg04
Refer to “Safety Precautions” �P117.
OPERATING RANGE FOR
PUSH-BUTTON START SYS-
TEM
s03bg01
S_308336-W
Antennas
Operating range
NOTE
. If the access key fob is not detected
within the operating range of the
antennas inside the vehicle, the push-
button ignition switch and the engine
start cannot be operated.
. Even when the access key fob is
outside the vehicle, if it is placed too
close to the glass, it may be possible
to switch the power or to start the
engine.
. Do not leave the access key fob in the
following places. It may become im-
possible to operate the push-button
ignition switch and the engine start.
– On the instrument panel
– On the floor
– Inside the glove box
– Inside the door trim pocket
– On the rear seat
– At the corner of the cargo area
. When operating the push-button igni-
tion switch or starting the engine, if the
access key fob battery is discharged,
perform the procedure described in “If
Access Key Fob Does Not Operate
Properly” �P451. In such a case,
replace the battery immediately. Refer
to “Replacing Battery of Access Key
Fob” �P507.
SWITCHING POWER STATUS
s03bg02
S_308335-W
Operation indicator
Push-button ignition switch
The power status is switched every time
the push-button ignition switch is
pressed.
1. Carry the access key fob, and sit in the
driver’s seat.
2. Make sure the select lever is in the “P”
position.
3. Press the push-button ignition switch
without depressing the brake pedal.
Every time the button is pressed, the
power is switched in the sequence of
“OFF”, “ACC”, “ON” and “OFF”. When
the engine is stopped and the push-
button ignition switch is in “ACC” or
“ON”, the operation indicator on the
push-button ignition switch illuminates
in orange.
INSTRUMENTS AND CONTROLS
156
(159,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
Power
status
Indicator color Operation
OFF Turned off Power is turned off.
ACC Orange
The following sys-
tems can be used:
audio and acces-
sory power outlet.
ON
Orange
(while engine is
stopped)
All electrical
systems can be
used.
Turned off
(while engine is
running)
CAUTION
. To prevent the vehicle battery from
discharging, do not leave the push-
button ignition switch in the “ON” or
“ACC” position for a long time.
. To avoid a malfunction, observe
the following precautions.
– Do not spill drinks or other
liquids on the push-button
ignition switch.
– Do not touch the push-button
ignition switch with a hand that
is soiled with oil or other
contaminants.
. If the push-button ignition switch
does not operate smoothly, stop
the operation. Contact a SUBARU
dealer immediately.
. If the operation indicator on the
push-button ignition switch does
not illuminate even when the in-
strument panel illumination is
turned on, have the vehicle in-
spected at a SUBARU dealer.
. If the vehicle was left in the hot sun
for a long time, the surface of the
push-button ignition switch may
get hot. Be careful not to burn
yourself.
NOTE
. When operating the push-button igni-
tion switch, firmly press it all the way.
. If the push-button ignition switch is
pressed quickly, the power may not
turn on or off.
. If the indicator light on the push-button
ignition switch flashes in green when
the push-button ignition switch is
pressed, steering is locked. When this
occurs, press the push-button ignition
switch while turning the steering wheel
left and right.
Battery drainage reduction
function
s03bg0201
If you leave the push-button ignition
switch in the “ON” position (when the
engine is not running), a series of
messages will be displayed on the in-
strument cluster in the following order,
and then the push-button ignition switch
will be automatically set to “OFF”.
. After approximately 5 minutes, the
message “Turn Power OFF or Turn
Car ON to Charge Battery” will be
displayed.
. After approximately 15 minutes, the
battery charge drops and the mes-
sage “Some Functions Disabled Re-
duced Battery Level” will be displayed.
. When the select lever is in the “P”
position and the ignition switch re-
mains in the “ON” position for ap-
proximately 30 minutes, the system
automatically turns the push button
ignition switch to the “OFF” position.
WHEN ACCESS KEY FOB
DOES NOT OPERATE PROP-
ERLY
s03bg03
Refer to “If Access Key Fob Does Not
Operate Properly” �P451.
INSTRUMENTS AND CONTROLS
157
3
(160,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
3-2. HAZARD WARNING
FLASHER
s03ab
S_308337-W
The hazard warning flasher is used to
warn other drivers when you have to park
your vehicle under emergency condi-
tions. The hazard warning flasher works
with the ignition switch in any position.
To turn on the hazard warning flasher,
press the hazard warning flasher switch
on the instrument panel. All the turn signal
lights and the turn signal indicator lights
will flash. To turn off the flasher, press the
switch again.
NOTE
When the hazard warning flasher is on,
the turn signals do not work.
3-3. METERS AND GAUGES
s03ad
NOTE
Liquid crystal displays are used in some
of the meters and gauges in the instru-
ment cluster. You will find their indications
hard to see if you wear polarized glasses.
SPEEDOMETER
s03ad03
The speedometer shows the vehicle
speed.
TACHOMETER
s03ad06
The tachometer shows the engine speed
in thousands of revolutions per minute.
CAUTION
Do not operate the engine with the
pointer of the tachometer in the red
zone. In this range, fuel injection will
be cut by the engine control module to
protect the engine from overrevving.
The engine will resume running nor-
mally after the engine speed is re-
duced below the red zone.
ODOMETER
s03ad04
S_308338-W
TRIP RESET switch
Odometer
This meter displays the odometer when
the ignition switch is in the “ON” position.
INSTRUMENTS AND CONTROLS
158
(161,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
The odometer shows the total distance
that the vehicle has been driven.
NOTE
If you press the TRIP RESET switch when
the ignition switch is in the “OFF” or “ACC”
position, the odometer/trip meter will light
up. The indicators will turn off when the
TRIP RESET switch is not operated for
approximately 10 seconds.
DOUBLE TRIP METER
s03ad05
S_308339-W
TRIP RESET switch
Trip meter
This meter displays the two trip meters
when the ignition switch is in the “ON”
position.
The trip meter shows the distance that the
vehicle has been driven since you last set
it to zero.
The display can be switched as shown in
the following sequence by pressing the
TRIP RESET switch.
ZOM0972
To reset the trip meter, select either the A
trip or B trip meter, then press and hold
the TRIP RESET switch.
CAUTION
To ensure safety, do not attempt to
change the function of the indicator
during driving, as an accident could
result.
NOTE
. If the connection between the instru-
ment cluster and battery is broken for
any reason such as vehicle mainte-
nance or fuse replacement, the data
recorded on the trip meter will be lost.
. If you press the TRIP RESET switch
when the ignition switch is in the “OFF”
or “ACC” position, the odometer/trip
meter will light up. It is possible to
switch between the A trip meter and B
trip meter indications while the od-
ometer/trip meter is lit up.
In addition, it is possible to reset the
trip meter by pressing and holding the
TRIP RESET switch.
The indicators will turn off when the
TRIP RESET switch is not operated
for approximately 10 seconds.
FUEL GAUGE AND DRIVING
RANGE ON REMAINING FUEL
s03ad07
S_308340-W
The fuel gauge shows the approximate
amount of fuel remaining in the tank.
The gauge may move slightly due to fuel
level movement in the tank (e.g., during
braking, turning or acceleration).
– CONTINUED –
INSTRUMENTS AND CONTROLS
159
3
(162,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
NOTE
. You will see the “
” sign in the fuel
gauge. This indicates that the fuel filler
lid is located on the right side of the
vehicle.
. If you press the TRIP RESET switch
while the ignition switch is in the “OFF”
or “ACC” position, the fuel gauge will
light up and indicate the amount of fuel
remaining in the tank.
The gauge will turn off when the TRIP
RESET switch is not operated for
approximately 10 seconds.
. The driving range on the remaining
fuel is only a guide. The indicated
value may differ from the actual driving
range on the remaining fuel, so you
must immediately fill the tank when the
low fuel warning light illuminates.
. If you refuel the vehicle with approxi-
mately 2.6 US gal (10 liters, 2.2 Imp
gal) or less of fuel, the values indi-
cated on the fuel gauge and driving
range on the remaining fuel may not
update. As a guideline, refueling the
vehicle with approximately 2.6 US gal
(10 liters, 2.2 Imp gal) or more of fuel
will update the indicated values.
ENGINE COOLANT TEMPERA-
TURE GAUGE
s03ad08
S_308341-W
Normal operating range
The temperature gauge shows engine
coolant temperature when the ignition
switch is in the “ON” position.
The coolant temperature will vary in
accordance with the outside temperature
and driving conditions.
We recommend that you drive moder-
ately until the pointer of the temperature
gauge reaches near the middle of the
range. Engine operation is optimum with
the engine coolant at this temperature
range and high revving operation when
the engine is not warmed up enough
should be avoided.
CAUTION
If the pointer exceeds the normal
operating range, safely stop the vehi-
cle as soon as possible.
Refer to “Engine Overheating”
�P446.
INSTRUMENT CLUSTER SET-
TINGS
s03ad16
Instrument cluster settings can be set on
the center information display. For details,
refer to “Displays” �P204.
INSTRUMENTS AND CONTROLS
160
(163,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
3-4. ILLUMINATION BRIGHT-
NESS CONTROL
s03aj
S_308342-W
The illumination brightness of the instru-
ment cluster, center information display
and climate control panel dims under the
following conditions.
. The light switch is in the “
” or “ ”
position when the ambient light is
dark.
. The light switch is in the “AUTO”
position and the headlights illuminate
automatically.
You can adjust the illumination brightness
for better visibility.
To brighten, turn the control dial upward.
To darken, turn the control dial downward.
NOTE
. When the control dial is turned fully
upward, the illumination brightness
becomes the maximum and the auto-
matic dimming function does not work
at all.
. The brightness setting is not canceled
even when the ignition switch is turned
to the “OFF” position.
. The operation method of illumination
brightness will differ depending
whether or not “Brightness Dial Con-
trol” in the center information display is
on. Refer to the operation method
indicated the following table.
“Brightness Dial Control” is on.
Operational
item
Instrument
cluster and
climate
control pa-
nel
Center in-
formation
display
Control dial Available Available
“Brightness
Adjust-
ment”*
1
on
the center
information
display
Not avail-
able
Not avail-
able
“Brightness Dial Control” is off.
Operational
item
Instrument
cluster and
climate
control pa-
nel
Center in-
formation
display
Control dial Available
Not avail-
able
“Brightness
Adjust-
ment” on
the center
information
display
Not avail-
able
Available
*1: When “Brightness Dial Control” is on,
“Brightness Adjustment” on the center
information display is not available.
For details about “Brightness Dial Con-
trol” on/off settings, refer to “Brightness/
Contrast” �P199.
AUTO DIMMER CANCEL
FUNCTION
s03aj01
When the ambient light is bright, the
illumination brightness is set to the max-
imum regardless of the position of the
control dial. In this case, you cannot
adjust the illumination brightness by
using the control dial. When the ambient
light is dark, you can dim the illumination
brightness as described above.
– CONTINUED –
INSTRUMENTS AND CONTROLS
161
3
(164,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
The operational/non-operational setting
and sensitivity of the auto dimmer cancel
function can be changed by your
SUBARU dealer. Contact your SUBARU
dealer for details.
3-5. WARNING AND INDICA-
TOR LIGHTS
s03ae
Several of the warning and indicator lights
illuminate momentarily and then go out
when the ignition switch is initially turned
to the “ON” position. This permits check-
ing the operation of the bulbs.
Apply the parking brake and turn the
ignition switch to the “ON” position. For
the system check, the following lights
illuminate and turn off after several
seconds or after the engine has started:
: Rear seatbelt warning light
: SRS airbag system warning light
: Front passenger’s frontal airbag ON
indicator light
: Front passenger’s frontal airbag
OFF indicator light
/ : CHECK ENGINE warning light/
Malfunction indicator light
: Charge warning light
: Oil pressure warning light
/ : ABS warning light
: Vehicle Dynamics Control warning
light/Vehicle Dynamics Control opera-
tion indicator light
: Vehicle Dynamics Control OFF indica-
tor light
/ : Brake system warning light
: Electronic parking brake indicator
light
: Power steering warning light
: Low tire pressure warning light (ex-
cept for Canada-spec. models)
: Auto Start Stop warning light (yellow)
INSTRUMENTS AND CONTROLS
162
(165,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
If any lights fail to illuminate, it indicates a
burned-out bulb or a malfunction of the
corresponding system.
Consult your authorized SUBARU dealer
for repair.
SEATBELT WARNING
LIGHT AND CHIME
s03ae01
Your vehicle is equipped with a seatbelt
warning device at the driver’s and pas-
senger’s seat, as required by current
safety standards.
Driver’s and front passenger’s
seats
s03ae0114
With the ignition switch turned to the “ON”
position, this device reminds the driver
and front passenger to fasten their
seatbelts by illuminating the warning
lights in the locations indicated in the
following illustration and sounding a
chime.
Driver’s warning light
S_308060-W
Front passenger’s warning light
S_308343-W
NOTE
. If the driver’s and/or front passenger’s
seatbelt(s) are/is not fastened while
driving, the seatbelt warning system
operates as follows according to the
vehicle speed.
– The warning light will illuminate
when the vehicle speed is ap-
proximately 4 mph (6 km/h) or less.
– The warning light will blink, and the
warning chime will make a beep
sound when the vehicle speed is
between approximately 4 mph (6
km/h) and 13 mph (20 km/h). The
warning chime will stop when the
vehicle stops.
– The warning light will blink, and the
warning chime will sound loudly
when 15 seconds have elapsed
when the vehicle speed is between
approximately 4 mph (6 km/h) and
13 mph (20 km/h).
– The warning light will blink, and the
warning chime will sound loudly
when the vehicle speed is ap-
proximately more than 13 mph (20
km/h).
. The warning light will turn off and the
warning chime will stop when the
seatbelt is fastened.
If there is no passenger on the front
passenger’s seat, the seatbelt warning
system for the front passenger’s seat will
be deactivated. The front passenger’s
seatbelt warning system monitors
whether or not there is a passenger on the
front passenger’s seat.
CAUTION
Observe the following precautions.
Failure to do so may prevent the
device from functioning correctly or
cause the device to fail.
. Do not install any accessory such
as a table or TV onto the seatback.
. Do not store a heavy load in the
seatback pocket.
– CONTINUED –
INSTRUMENTS AND CONTROLS
163
3
(166,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
. Do not allow the rear seat occupant
to place his/her hands or legs on
the front passenger’s seatback, or
allow him/her to pull the seatback.
. Do not use front seats with their
backward-forward position and
seatback not being locked into
place securely. If any of them are
not locked securely, adjust them
again. For adjusting procedure,
refer to “Front Seats” �P37.
If the seatbelt warning system for the front
passenger’s seat does not function cor-
rectly (e.g., it is activated even when the
front passenger’s seat is empty or it is
deactivated even when the front passen-
ger has not fastened his/her seatbelt),
take the following actions.
. Ensure that no article is placed on the
seat other than a child restraint system
and its child occupant, although we
strongly recommend that all children
sit in the rear seat properly restrained.
. Ensure that there is no article left in the
seatback pocket.
. Ensure that the backward-forward
position and seatback of front pas-
senger’s seat are locked into place
securely by moving the seat back and
forth.
If still the seatbelt warning system for front
passenger’s seat does not function cor-
rectly after taking relevant corrective
actions described above, immediately
contact your SUBARU dealer for an
inspection.
Rear passenger’s seats
s03ae0115
Rear seatbelt warning light
S_308344-W
Rear left seat
Rear center seat
Rear right seat
With the ignition switch turned to the “ON”
position, the seatbelt warning light and
chime reminds the rear passenger to
fasten their seatbelt by illuminating the
warning lights in the locations indicated in
the above illustration and sounding a
chime.
WARNING
. The driver must check that all the
passengers have fastened their
seatbelts properly since the seat-
belt warning system may not detect
passengers under the following
circumstances.
– When cushions or child re-
straint systems, etc., are used.
– When a child or small adult is
sitting in the seat.
. Observe the following precautions
– Do not apply any strong impact
to the rear seat.
– Do not fold the seatback for-
ward when objects are on the
seat.
– Do not spill liquid on the rear
seat. If liquid is spilled, wipe it
off immediately.
INSTRUMENTS AND CONTROLS
164
(167,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
– Do not remove or disassemble
the rear seat.
NOTE
. The seatbelt warning system of the
rear seat detects if the seat is occu-
pied by a passenger. Heavy cargo or
large pets on the rear seat may result
in the activation of the passenger
seatbelt warning light and chime.
Fastening the rear seatbelt prior to
loading cargo or large pets will avoid
activating the passenger seatbelt
warning light and chime.
. When folding the rear seat, ensure
that the seat is empty prior to folding.
Items caught between the seat bottom
and seatback, when folded, may
damage the seat surface or activate
the passenger seatbelt warning light
and chime.
If passengers in the rear seats do not
fasten their seatbelts when the ignition
switch is turned to the “ON” position, the
seatbelt warning lights will illuminate or
blink to indicate that their seatbelts are
not fastened.
NOTE
. If the rear passenger’s seatbelt(s) are/
is still not fastened while driving, the
seatbelt warning system operates as
follows according to the vehicle
speed.
– The warning light will illuminate
when the vehicle speed is ap-
proximately 4 mph (6 km/h) or less.
– When the vehicle speed is ap-
proximately between 4 mph (6
km/h) and 13 mph (20 km/h), the
seatbelt warning lights will blink
and a warning chime will sound.
The chime will make a beep sound
for 15 seconds, and it then will
become louder and continue for 35
seconds. The warning light will
blink for 50 seconds, then it will
illuminate steadily and the chime
will stop.
– The warning light will blink, and the
beep will sound loudly for 35
seconds when the vehicle speed is
approximately more than 13 mph
(20 km/h). After 35 seconds, the
blinking warning light will illuminate
steadily and the chime will stop.
The warning lights will continue to
illuminate until their seatbelts are
fastened.
. The warning light will turn off and the
warning chime will stop when the
seatbelt is fastened.
SRS AIRBAG SYSTEM
WARNING LIGHT
s03ae02
WARNING
If the warning light exhibits any of the
following conditions, immediately stop
the vehicle in a safe place, and consult
a SUBARU dealer. Unless a techni-
cian checks and repairs the system as
needed, the seatbelt pretensioners
and/or the SRS airbag will not operate
properly in the event of a collision,
which may result in injury.
. Flashing or flickering of the warn-
ing light
. No illumination of the warning light
when the ignition switch is first
turned to the “ON” position
. Continuous illumination of the
warning light
. Illumination of the warning light
while driving
For details about the components mon-
itored by the warning light, refer to “SRS
Airbag System Monitors” �P110.
– CONTINUED –
INSTRUMENTS AND CONTROLS
165
3
(168,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
FRONT PASSENGER’S FRON-
TAL AIRBAG ON AND OFF IN-
DICATOR LIGHTS
s03ae03
S_308345-W
: Front passenger’s frontal airbag ON
indicator light
: Front passenger’s frontal airbag OFF
indicator light
For details about the operating conditions
of SRS seat cushion airbag, refer to
“SUBARU Advanced Frontal Airbag
System” �P92.
The front passenger’s frontal airbag ON
and OFF indicator lights show you the
status of the front passenger’s SRS
frontal airbag.
The indicator lights are located as shown
in the illustration.
When the ignition switch is turned to the
“ON” position, both the ON and OFF
indicator lights illuminate for 6 seconds
during which time the system is checked.
Following the system check, both indica-
tor lights turn off for 2 seconds. After that,
one of the indicator lights illuminates
depending on the status of the front
passenger’s SRS frontal airbag deter-
mined by the SUBARU advanced frontal
airbag system monitoring.
If the front passenger’s SRS frontal
airbag is activated, the passenger’s fron-
tal airbag ON indicator light will illuminate
while the OFF indicator light will remain
off.
If the front passenger’s SRS frontal
airbag is deactivated, the passenger’s
frontal airbag ON indicator light will
remain off while the OFF indicator light
will illuminate.
With the ignition switch turned to the “ON”
position, if both the ON and OFF indicator
lights remain illuminated or off simulta-
neously even after the system check
period, the system is malfunctioning.
Contact your SUBARU dealer immedi-
ately for an inspection.
CHECK ENGINE
WARNING LIGHT/MAL-
FUNCTION INDICATOR
LIGHT
s03ae04
CAUTION
If the CHECK ENGINE warning light/
malfunction indicator light illuminates
while you are driving, have your
vehicle checked/repaired by your
SUBARU dealer as soon as possible.
Continued vehicle operation without
having the emission control system
checked and repaired as necessary
could cause serious damage, which
may not be covered by your vehicle’s
warranty.
If this light illuminates steadily or blinks
while the engine is running, it may
indicate that there is at least one problem
or potential problem somewhere in the
emission control system.
If the light illuminates con-
stantly
s03ae0401
If the light illuminates constantly while
driving or does not turn off after the
engine starts, an emission control system
malfunction has been detected.
INSTRUMENTS AND CONTROLS
166
(169,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
You should have your vehicle checked by
an authorized SUBARU dealer immedi-
ately.
NOTE
This light also illuminates when the fuel
filler cap is not tightened until it clicks.
If you have recently refueled your vehicle,
the cause of the CHECK ENGINE warn-
ing light/malfunction indicator light com-
ing on could be a loose or missing fuel
filler cap. Remove the cap and retighten it
until it clicks. Make sure nothing is
interfering with the sealing of the cap.
Tightening the cap will not make the
CHECK ENGINE warning light/malfunc-
tion indicator light turn off immediately. It
may take several driving trips. If the light
does not turn off, take your vehicle to your
authorized SUBARU dealer immediately.
If the light is blinking
s03ae0402
If the light is blinking while driving, an
engine misfire condition has been de-
tected which may damage the emission
control system.
To prevent serious damage to the emis-
sion control system, you should conform
to the following instructions.
. Reduce vehicle speed.
. Avoid hard acceleration.
. Avoid steep uphill grades.
. Reduce the amount of cargo, if pos-
sible.
. Stop towing a trailer as soon as
possible.
The CHECK ENGINE warning light/mal-
function indicator light may stop blinking
and illuminate steadily after several driv-
ing trips. You should have your vehicle
checked by an authorized SUBARU
dealer immediately.
COOLANT TEMPERA-
TURE LOW INDICATOR
LIGHT (Blue)/COOLANT
TEMPERATURE HIGH
WARNING LIGHT (Red)
s03ae48
CAUTION
. After turning the ignition switch to
the “ON” position, if this indicator
light/warning light behaves in any
of the following ways, the electrical
system may be malfunctioning.
Contact your SUBARU dealer im-
mediately for an inspection.
– It remains blinking in RED.
– It remains illuminated in RED
for more than 2 seconds.
– It remains blinking in RED and
BLUE alternately.
. While driving, if this indicator light/
warning light behaves in any of the
following ways, take the specified
appropriate measure listed below.
– Blinking or illuminated in RED:
Safely stop the vehicle as soon
as possible, and refer to the
emergency steps to take in the
case of engine overheating.
After that, have the system
checked by your nearest
SUBARU dealer. Refer to “En-
gine Overheating” �P446.
– Blinking in RED and BLUE
alternately:
The electrical system may be
malfunctioning. Contact your
SUBARU dealer for an inspec-
tion.
This coolant temperature low indicator
light/coolant temperature high warning
light has the following three functions.
. Illumination in BLUE indicates insuffi-
cient warming up of the engine.
– CONTINUED –
INSTRUMENTS AND CONTROLS
167
3
(170,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
. Blinking in RED indicates that the
engine is close to overheating.
. Illumination in RED indicates over-
heating condition of the engine.
If the engine coolant temperature in-
creases over the specified range, the
indicator light/warning light blinks in RED.
At this time, the engine is close to over-
heating.
If the engine coolant temperature in-
creases further, the indicator light/warn-
ing light illuminates in RED continuously.
At this time, the engine may be over-
heating.
When the indicator light/warning light
blinks in RED or illuminates in RED,
safely stop the vehicle as soon as
possible, and refer to the emergency
steps to take in the case of engine
overheating. Refer to “Engine Overheat-
ing” �P446. After that, have the system
checked by your nearest SUBARU deal-
er.
Also, if the indicator light/warning light
often blinks in RED, the electrical system
may be malfunctioning. Contact your
SUBARU dealer for an inspection.
NOTE
If the engine is restarted after a certain
driving condition, this indicator light/
warning light may illuminate in RED.
However, this is not a malfunction if the
indicator light/warning light turns off after
a short time.
CHARGE WARNING
LIGHT
s03ae05
If this light illuminates when the engine is
running, it may indicate that the charging
system is not working properly.
If the light illuminates while driving or
does not turn off after the engine starts,
stop the engine at the first safe opportu-
nity and check the drive belt. If the drive
belt is loose, broken or if the drive belt is in
good condition but the light remains
illuminated, contact your nearest
SUBARU dealer immediately.
OIL PRESSURE WARN-
ING LIGHT
s03ae06
CAUTION
Do not operate the engine with the oil
pressure warning light on. This may
cause serious engine damage.
If this light illuminates when the engine is
running, it may indicate that the engine oil
pressure is low and the lubricating system
is not working properly.
If the light illuminates while driving or
does not turn off after the engine starts,
stop the engine at the first safe opportu-
nity and contact your nearest SUBARU
dealer immediately.
ENGINE LOW OIL LEVEL
WARNING LIGHT
s03ae58
This light appears when the engine oil
level decreases to the lower limit.
If the warning light appears, check the
engine oil level on a level surface. When
the engine oil level is not within the normal
range, refill with engine oil. Refer to
“Engine Oil” �P476. After adding or
changing the engine oil, warm up the
engine and stop it on a level surface, then
start the engine after a lapse of 1 minute
or more. Confirm that the warning light
has turned off after the engine has
started. If the warning light does not turn
off after refilling the engine oil, or the light
appears even though the engine oil level
is within the normal range, have the
vehicle checked by a SUBARU dealer.
NOTE
. The oil level will be detected by the
system just after turning the ignition
switch to the “OFF” position. If the oil
level is below the lower limit when the
INSTRUMENTS AND CONTROLS
168
(171,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
ignition switch is turned to the “ON”
position, the engine low oil level
warning light will turn on.
. When the vehicle is parked on a steep
slope, the engine low oil level warning
light may not illuminate even if the oil
level is below the lower limit to avoid
erroneous lighting.
AT OIL TEMP WARNING
LIGHT
s03ae07
If this light illuminates when the engine is
running, it may indicate that the trans-
mission fluid temperature is too hot.
If the light illuminates while driving,
immediately stop the vehicle in a safe
place and let the engine idle until the
warning light turns off.
Transmission control system
warning
s03ae0701
If the AT OIL TEMP warning light flashes
after the engine has started, it may
indicate that the transmission control
system is not working properly. Contact
your nearest SUBARU dealer for service
immediately.
LOW TIRE PRESSURE
WARNING LIGHT (Except
for Canada-Spec. Models)
s03ae08
When the ignition switch is turned to the
“ON” position, the low tire pressure
warning light will illuminate for a few
seconds to check that the tire pressure
monitoring system (TPMS) is functioning
properly. If there is no problem and all
tires are properly inflated, the light will go
out.
Each tire, including the spare (if pro-
vided), should be checked monthly when
cold and inflated to the inflation pressure
recommended by the vehicle manufac-
turer on the vehicle placard or tire inflation
pressure label. (If your vehicle has tires of
a different size than the size indicated on
the vehicle placard or tire inflation pres-
sure label, you should determine the
proper tire inflation pressure for those
tires.)
As an added safety feature, your vehicle
has been equipped with a tire pressure
monitoring system (TPMS) that illumi-
nates a low tire pressure telltale when one
or more of your tires is significantly under-
inflated. Accordingly, when the low tire
pressure telltale illuminates, you should
stop and check your tires as soon as
possible, and inflate them to the proper
pressure. Driving on a significantly under-
inflated tire causes the tire to overheat
and can lead to tire failure. Under-inflation
also reduces fuel efficiency and tire tread
life, and may affect the vehicle’s handling
and stopping ability.
Please note that the TPMS is not a
substitute for proper tire maintenance,
and it is the driver’s responsibility to
maintain correct tire pressure, even if
under-inflation has not reached the level
to trigger illumination of the TPMS low tire
pressure telltale.
Your vehicle has also been equipped with
a TPMS malfunction indicator to indicate
when the system is not operating prop-
erly. The TPMS malfunction indicator is
combined with the low tire pressure tell-
tale. When the system detects a mal-
function, the telltale will flash for approxi-
mately one minute and then remain
continuously illuminated. This sequence
will continue upon subsequent vehicle
start-ups as long as the malfunction
exists. When the malfunction indicator is
illuminated, the system may not be able to
detect or signal low tire pressure as
intended. TPMS malfunctions may occur
for a variety of reasons, including the
installation of replacement or alternate
tires or wheels on the vehicle that prevent
the TPMS from functioning properly. Al-
ways check the TPMS malfunction telltale
after replacing one or more tires or
wheels on your vehicle to ensure that the
replacement or alternate tires and wheels
allow the TPMS to continue to function
properly.
– CONTINUED –
INSTRUMENTS AND CONTROLS
169
3
(172,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
Should the warning light illuminate stea-
dily after blinking for approximately one
minute, have the system inspected by
your nearest SUBARU dealer as soon as
possible.
WARNING
If this light does not illuminate briefly
after the ignition switch is turned on or
the light illuminates steadily after
blinking for approximately one minute,
you should have your Tire Pressure
Monitoring System checked at a
SUBARU dealer as soon as possible.
If this light illuminates while driving,
never brake suddenly. Instead, per-
form the following procedure. Other-
wise an accident involving serious
vehicle damage and serious personal
injury could occur.
1) Keep driving straight ahead while
gradually reducing speed.
2) Slowly pull off the road to a safe
place.
3) Check the pressure for all four tires
and adjust the pressure to the
COLD tire pressure shown on the
tire inflation pressure label on the
door pillar on the driver’s side.
If this light still illuminates while driving
after adjusting the tire pressure, a tire
may have significant damage and a
fast leak that causes the tire to lose air
rapidly. If you have a flat tire, refer to
“Flat Tires” �P439.
When a replacement tire is mounted
or a wheel rim is replaced without the
original pressure sensor/transmitter
being transferred, the Low tire pres-
sure warning light will illuminate stea-
dily after blinking for approximately
one minute. This indicates the TPMS
is unable to monitor all four road
wheels. Contact your SUBARU dealer
as soon as possible for tire and sensor
replacement and/or system resetting.
If the light illuminates steadily after
blinking for approximately one minute,
promptly contact a SUBARU dealer to
have the system inspected.
CAUTION
The tire pressure monitoring system is
NOT a substitute for manually check-
ing tire pressure. The tire pressure
should be checked periodically (at
least monthly) using a tire gauge. After
any change to tire pressure(s), the tire
pressure monitoring system will not re-
check tire inflation pressures until the
vehicle is first driven more than 25
mph (40 km/h). After adjusting the tire
pressures, increase the vehicle speed
to at least 25 mph (40 km/h) to start the
TPMS re-checking of the tire inflation
pressures. If the tire pressures are
now above the severe low pressure
threshold, the low tire pressure warn-
ing light should turn off a few minutes
later. Therefore, be sure to install the
specified size for the front and rear
tires.
ABS WARNING LIGHT
s03ae09
CAUTION
. If any of the following conditions
occur, we recommend that you
have the ABS repaired at the first
available opportunity by your
SUBARU dealer.
– The warning light does not
illuminate when the ignition
switch is turned to the “ON”
position.
– The warning light illuminates
when the ignition switch is
turned to the “ON” position, but
it does not turn off even after
starting the vehicle.
– The warning light illuminates
during driving.
. When the warning light is on (and
brake system warning light is off),
INSTRUMENTS AND CONTROLS
170
(173,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
the ABS function shuts down;
however, the conventional brake
system continues to operate nor-
mally.
The ABS warning light illuminates to-
gether with the brake system warning
light if the EBD system malfunctions. For
further details of the EBD system mal-
function warning, refer to “Brake System
Warning Light” �P171.
NOTE
If the warning light behavior is as de-
scribed in the following conditions, the
ABS may be considered normal.
. The warning light illuminates right
after the engine is started but turns off
immediately, remaining off.
. The warning light remains illuminated
after the engine has been started, but
it turns off while driving.
. The warning light illuminates during
driving, but it turns off immediately and
remains off.
When driving with an insufficient battery
voltage such as when the engine is jump
started, the ABS warning light may
illuminate. This is due to the low battery
voltage and does not indicate a malfunc-
tion. When the battery becomes fully
charged, the light will turn off.
BRAKE SYSTEM
WARNING LIGHT
s03ae10
WARNING
. Driving with the brake system
warning light on is dangerous. This
indicates your brake system may
not be working properly. If the light
remains illuminated, have the
brakes inspected by a SUBARU
dealer immediately.
. If at all in doubt about whether the
brakes are operating properly, do
not drive the vehicle. Have your
vehicle towed to the nearest
SUBARU dealer for repair.
. If the brake system warning light
illuminates, the electronic parking
brake system may be malfunction-
ing. Immediately stop your vehicle
in a safe location, use tire stops
under the tires to prevent the
vehicle from moving and contact
your SUBARU dealer. For details,
refer to “Electronic Parking Brake”
�P339.
NOTE
. Even if the brake system warning light
illuminates, if the warning light beha-
vior is as described in the following
examples, the electronic parking
brake system is not malfunctioning.
– The warning light turns off when
the electronic parking brake is
applied or released.
– The warning light turns off when
the ignition switch is turned to the
“ON” position again.
. The brake system warning light may
illuminate immediately after the en-
gine is started. However, it is not
malfunctioning if the warning light
turns off after the electronic parking
brake is released.
. The brake system warning light may
illuminate after the electronic parking
brake is frequently applied and re-
leased. However, the electronic park-
ing brake system is not malfunctioning
if the light turns off after a short period
of time.
. When the engine is started while the
electronic parking brake is applied/
released, the system may judge an
abnormal situation and the warning
light may illuminate. If the warning light
illuminates, turn the ignition switch
once to the “OFF” position and then
restart the engine. Then, apply/re-
lease the electronic parking brake. If
the warning light turns off, the system
will be restored.
– CONTINUED –
INSTRUMENTS AND CONTROLS
171
3
(174,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
This light has the following functions.
Brake fluid level warning
s03ae1002
This light illuminates when the brake fluid
level has dropped to near the “MIN” level
of the brake fluid reservoir with the
ignition switch in the “ON” position and
with the parking brake fully released.
If the brake system warning light should
illuminate while driving (with the parking
brake fully released and with the ignition
switch positioned in “ON”), it could be an
indication of leaking of brake fluid or worn
brake pads. If this occurs, immediately
stop the vehicle at the nearest safe place
and check the brake fluid level. If the fluid
level is below the “MIN” mark in the
reservoir, do not drive the vehicle. Have
the vehicle towed to the nearest SUBARU
dealer for repair.
Electronic Brake Force Distri-
bution (EBD) system warning
s03ae1003
If the warning light remains on even
though the parking brake is released, the
brake fluid level may be low or there could
be a problem with the EBD system. Park
the vehicle in a safe place immediately
and contact a SUBARU dealer.
Electronic brake booster warn-
ing
s03ae1009
The brake system warning light illumi-
nates when the electronic brake booster
is malfunctioning. In addition, the warning
messages “Brake System” and “Check
Owner’s Manual” are displayed alter-
nately on the instrument cluster display. If
the warning light illuminates, promptly
park in a safe location as soon as possible
and contact your SUBARU dealer.
Electronic parking brake sys-
tem warning
s03ae1004
The brake system warning light illumi-
nates when the electronic parking brake
system is malfunctioning. If the warning
light illuminates, promptly park in a safe
location as soon as possible and contact
your SUBARU dealer.
The brake system warning light remains
illuminated when the parking brake can-
not be released even if the electronic
parking brake switch is pushed. For de-
tails, refer to “Electronic Parking Brake”
�P339.
Frequent operation warning:
The brake system warning light illumi-
nates and a chirp sound will be heard if
the electronic parking brake switch is
operated too frequently. In this case, the
operation of the electronic parking brake
switch is restricted to protect the electro-
nic parking brake system.
ELECTRONIC PARK-
ING BRAKE INDICA-
TOR LIGHT
s03ae85
Parking brake indicator
s03ae8501
The light illuminates with the parking
brake applied while the ignition switch is
in the “ACC” or “ON” position. It turns off
when the parking brake is fully released.
Electronic parking brake sys-
tem warning
s03ae8502
WARNING
. When you release the electronic
parking brake while the engine is
running, the electronic parking
brake indicator light will turn off.
However, if the light still illumi-
nates, stop the vehicle in a safe
location immediately and have the
system inspected by a SUBARU
dealer.
. If at all in doubt about whether the
brakes are operating properly, do
not drive the vehicle. Have your
vehicle towed to the nearest
SUBARU dealer for repair.
. If the electronic parking brake
indicator light flashes, the electro-
INSTRUMENTS AND CONTROLS
172
(175,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
nic parking brake system may be
malfunctioning. Immediately stop
your vehicle in a safe location, use
tire stops under the tires to prevent
the vehicle from moving and con-
tact your SUBARU dealer. For
details, refer to “Electronic Parking
Brake” �P339.
NOTE
. When the ignition switch is turned to
the “OFF” position with the electronic
parking brake applied, the electronic
parking brake indicator light remains
illuminated for approximately 30 sec-
onds and then turns off.
. When the electronic parking brake
switch is pulled to apply the electronic
parking brake while the ignition switch
is in the “OFF” position, the electronic
parking brake indicator light illumi-
nates, remains illuminated for ap-
proximately 30 seconds and then
turns off.
. Even if the electronic parking brake
indicator light flashes, if the warning
light behavior is as described in the
following examples, the electronic
parking brake system is not malfunc-
tioning.
– The indicator light turns off when
the electronic parking brake is
released.
. The electronic parking brake indicator
light may flash immediately after the
engine is started. However, it is not
malfunctioning if the indicator light
turns off after the electronic parking
brake is released.
. The electronic parking brake indicator
light may flash after the electronic
parking brake is frequently applied
and released. However, the electronic
parking brake system is not malfunc-
tioning if the light turns off after a short
period of time.
The electronic parking brake indicator
light flashes when the electronic parking
brake system is malfunctioning. If the
indicator light flashes, promptly park in a
safe location as soon as possible and
contact your SUBARU dealer.
The electronic parking brake indicator
light remains illuminated when the park-
ing brake cannot be released even if the
electronic parking brake switch is pushed.
For details, refer to “Electronic Parking
Brake” �P339.
Parking brake apply inhibit warning:
The electronic parking brake indicator
light flashes for 10 seconds and a chirp
sound will be heard if the electronic
parking brake switch is operated when
the parking brake cannot be applied.
Frequent operation warning:
The electronic parking brake indicator
light flashes for 10 seconds and a chirp
sound will be heard if the electronic
parking brake switch is operated too
frequently. In this case, the operation of
the electronic parking brake switch is
restricted to protect the electronic parking
brake system.
NOTE
Wait until the indicator light turns off.
AUTO VEHICLE HOLD
INDICATOR LIGHT
s03ae94
CAUTION
If the Auto Vehicle Hold indicator light
does not illuminate even when the
Auto Vehicle Hold switch is pressed to
activate the Auto Vehicle Hold func-
tion, the electronic parking brake
system may be malfunctioning.
This indicator illuminates when the Auto
Vehicle Hold is activated. This indicator
blinks while the vehicle is stopped by the
Auto Vehicle Hold function. For details,
refer to “Auto Vehicle Hold Function”
�P343.
– CONTINUED –
INSTRUMENTS AND CONTROLS
173
3
(176,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
LOW FUEL WARNING
LIGHT
s03ae11
The low fuel warning light illuminates
when the tank is nearly empty approxi-
mately 2.6 US gal (10 liters, 2.2 Imp gal).
It only operates when the ignition switch is
in the “ON” position.
CAUTION
Promptly put fuel in the tank whenever
the low fuel warning light illuminates.
Engine misfires as a result of an empty
tank could cause damage to the
engine.
DOOR OPEN INDICATOR
LIGHT
s03ae61
When any of the doors or the rear gate is
not fully closed, the door open indicator
light appears. This function is effective
even if the ignition switch is in the “OFF”
or “ACC” position.
The open door is indicated by the
corresponding part of the door open
indicator light.
Always make sure this indicator does not
appear before you start to drive.
NOTE
When the ignition switch is in the “OFF”
position and the door open indicator light
is illuminated, it will automatically turn off
after two minutes to protect the battery.
ENGINE HOOD OPEN
WARNING LIGHT
s03ae98
The warning light illuminates if the engine
hood is not fully closed. This function is
effective even if the ignition switch is in
the “OFF” or “ACC” position.
Always make sure this light is not illumi-
nated before you start to drive.
WINDSHIELD WASHER
FLUID WARNING LIGHT
s03ae42
This light appears when the fluid level in
the washer fluid tank decreases to the
lower limit (approximately 0.6 US qt (0.6
liters, 0.5 Imp qt)).
ALL-WHEEL DRIVE
WARNING LIGHT
s03ae13
WARNING
Continued driving with the AWD
warning light flashing can lead to
powertrain damage. If the AWD
warning light flashes, promptly park in
a safe location and then check
whether all four tires are the same
diameter and whether any of the tires
has a puncture or has lost air pressure
for some other reason.
NOTE
If the temporary spare tire is used, the
AWD warning light may flash. Use of the
temporary spare tire should therefore be
restricted to the minimum time necessary.
Replace the temporary spare tire with a
conventional tire as soon as possible.
This light flashes if the vehicle is driven
with tires of different diameters fitted on
its wheels or with the air pressure
excessively low in any of its tires.
POWER STEERING
WARNING LIGHT
s03ae53
While the engine is running, this warning
light illuminates when a malfunction has
been detected in the electric power
steering system.
CAUTION
When the power steering warning light
is illuminated, there may be more
resistance when the steering wheel is
operated. Drive carefully to the near-
INSTRUMENTS AND CONTROLS
174
(177,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
est SUBARU dealer and have the
vehicle inspected immediately.
NOTE
If the steering wheel is operated in the
following ways, the power steering control
system may temporarily limit the power
assist in order to prevent the system
components, such as the control compu-
ter and drive motor, from overheating.
. The steering wheel is operated fre-
quently and turned sharply while the
vehicle is maneuvered at extremely
low speeds, such as while frequently
turning the steering wheel during
parallel parking.
. The steering wheel remains in the fully
turned position for a long period of
time.
At this time, there will be more resistance
when steering. However, this is not a
malfunction. Normal steering force will be
restored after the steering wheel is not
operated for a while and the power
steering control system has an opportu-
nity to cool down. However, if the power
steering is operated in a non-standard
way which causes power assist limitation
to occur too frequently, that may result in
a malfunction of the power steering
control system.
VEHICLE DYNAMICS
CONTROL WARNING
LIGHT/VEHICLE DY-
NAMICS CONTROL OP-
ERATION INDICATOR
LIGHT
s03ae14
Vehicle Dynamics Control
warning light
s03ae1401
CAUTION
The Vehicle Dynamics Control system
provides its ABS control through the
electrical circuit of the ABS. Accord-
ingly, if the ABS is inoperative, the
Vehicle Dynamics Control system be-
comes unable to provide ABS control.
As a result, the Vehicle Dynamics
Control system becomes inoperative,
causing the warning light to illuminate.
Although both the Vehicle Dynamics
Control and ABS are inoperative in
this case, the ordinary functions of the
brake system are still available. You
will be safe while driving in this
condition, but drive carefully and have
your vehicle checked at a SUBARU
dealer as soon as possible.
NOTE
. If the electrical circuit of the Vehicle
Dynamics Control system itself mal-
functions, the warning light only illu-
minates. At this time, the ABS (Anti-
lock Brake System) remains fully
operational.
. The warning light illuminates when the
electronic control system of the ABS/
Vehicle Dynamics Control system
malfunctions.
. The Vehicle Dynamics Control warn-
ing light, ABS warning light, and brake
system warning light illuminate simul-
taneously if the EBD system malfunc-
tions. For further details of the EBD
system malfunction warning, refer to
“Electronic Brake Force Distribution
(EBD) system warning” �P172.
The Vehicle Dynamics Control system is
probably inoperative under any of the
following conditions. Have your vehicle
checked at a SUBARU dealer immedi-
ately.
. The warning light does not illuminate
when the ignition switch is turned to
the “ON” position.
. The warning light illuminates while the
vehicle is running.
NOTE
If the warning light behavior is as de-
scribed in the following examples, the
Vehicle Dynamics Control system may be
considered normal.
– CONTINUED –
INSTRUMENTS AND CONTROLS
175
3
(178,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
. The warning light illuminates right
after the engine is started but turns off
immediately and remains off.
. The warning light illuminates after the
engine has started and turns off while
the vehicle is subsequently being
driven.
. The warning light illuminates during
driving, but turns off immediately and
remains off.
Vehicle Dynamics Control op-
eration indicator light
s03ae1402
The indicator light flashes during activa-
tion of the skid suppression function and
during activation of the traction control
function.
NOTE
. The light may remain illuminated for a
short period of time after the engine
has been started, especially in cold
weather. This does not indicate the
existence of a problem. The light
should turn off as soon as the engine
has warmed up.
. The indicator light illuminates when
the engine has developed a problem
and the CHECK ENGINE warning
light/malfunction indicator light is on.
The Vehicle Dynamics Control system is
probably malfunctioning under the fol-
lowing condition. Have your vehicle
checked at a SUBARU dealer as soon as
possible.
. The light does not turn off even after
the lapse of several minutes (the
engine has warmed up) after the
engine has started.
VEHICLE DYNAMICS
CONTROL OFF INDICA-
TOR LIGHT
s03ae15
The light illuminates when the Vehicle
Dynamics Control OFF switch is pressed
to deactivate the Vehicle Dynamics Con-
trol system. Refer to “To Turn On/Off the
Vehicle Dynamics Control System”
�P333.
The Vehicle Dynamics Control system is
probably malfunctioning under any of the
following conditions. Have your vehicle
checked at a SUBARU dealer immedi-
ately.
. The light does not illuminate while the
system check.
. The light does not turn off even after a
period of approximately 2 seconds
after the ignition switch has been
turned to the “ON” position.
WARNING CHIMES AND
WARNING INDICATOR OF THE
KEYLESS ACCESS WITH
PUSH-BUTTON START SYS-
TEM
s03ae55
S_308061-W
The keyless access with push-button
start system is equipped with a warning
chime and the access key warning
indicator in order to minimize improper
operations and help protect your vehicle
from theft.
INSTRUMENTS AND CONTROLS
176
(179,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
When the warning chime sounds and/or
the warning indicator appears, take the
appropriate action.
You cannot turn the warning chimes off.
However, the volume setting of the out-
side warning chime can be changed by a
SUBARU dealer. Consult your SUBARU
dealer for details.
WARNING
Never drive the vehicle if the indicator
on the push-button ignition switch is
flashing in green when starting the
engine. This indicates the status that
the steering wheel is not released and
could result in an accident involving
serious injury or death.
CAUTION
. When starting the engine again
after the operation indicator on the
push-button ignition switch flashes
in green, if the operation indicator
is still flashing in green, there could
be a steering lock malfunction.
Contact your SUBARU dealer as
soon as possible.
. When the operation indicator on
the push-button ignition switch
flashes in orange, contact a
SUBARU dealer immediately.
NOTE
. Even when the access key fob is
within the operating ranges inside the
vehicle, the access key warning for
engine start may be provided de-
pending on the status of the access
key fob and the environmental condi-
tions.
. When the access key fob is taken out
of the vehicle through an open win-
dow, the access key takeout warning
or passenger access key takeout
warning will not be provided.
List of warnings
s03ae5504
CAUTION
When any of the following warnings
occurs even if the access key warning
indicator does not appear, take the
appropriate action.
– CONTINUED –
INSTRUMENTS AND CONTROLS
177
3
(180,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
Inside
warning
chime
Outside
warning
chime
Operation in-
dicator on
push-button
ignition
switch
Status Action
Ding, ding
...
(intermit-
tent)
— —
The driver’s door is opened
while the push-button ignition
switch is “ACC” position and the
select lever is in the “P” position.
Switch the push-button ignition
switch to “OFF”, or close the
driver’s door.
When exiting the vehicle, be
sure to switch the push-button
ignition switch to “OFF”.
The push-button ignition switch
is switched to “OFF” while the
driver’s door is open.
Close the driver’s door.
Ding
Short beep
(2 sec-
onds)
—
Lockout warning:
The doors are locked by follow-
ing methods when an access
key fob is left in the car.
. The door is closed when the
lock lever of the door is in
the lock position.
. The door is closed when the
power door locking switch is
in the lock position.
Take out the access key fob from
the vehicle, and lock the doors.
The doors cannot be locked
while the access key fob is
inside the vehicle.
A chirp sound will be heard, and
all doors will be unlocked.
—
Short beep
(2 sec-
onds)
—
Access key lock-in warning:
The door lock sensor is touched
while the push-button ignition
switch is “OFF” and the access
key fob is inside the vehicle.
Take out the access key fob from
the vehicle, and lock the doors.
If the access key fob is inside the
vehicle, the doors cannot be
locked.
—
Beep,
beep,
beep,
beep, beep
(5 times)
—
Door ajar warning:
The door lock sensor is touched
while the ignition switch is in the
“OFF” position and one of the
doors including the rear gate is
opened.
Close the doors securely and
lock them.
If one of the doors including the
rear gate is opened, the doors
cannot be locked.
Ding
Long beep
(60 sec-
onds max.)
—
Power warning:
The door lock sensor is touched
while you are carrying the ac-
cess key fob, the push-button
ignition switch is in a position
other than “OFF” and the select
lever is in the “P” position.
Return the access key fob inside
the vehicle, or switch the push-
button ignition switch to “OFF”.
If the push-button ignition switch
is not switched to “OFF”, the
doors cannot be locked.
Ding, ding
...
(7 sec-
onds)
— —
Access key warning:
The vehicle is driven while the
access key fob is not inside the
vehicle.
Carry the access key fob, and
drive the vehicle.
Ding — —
Access key warning for en-
gine start:
The push-button ignition switch
is pressed while the access key
fob is not inside the vehicle.
Carry the access key fob, and
press the push-button ignition
switch.
Ding
Beep,
beep, beep
(3 times)
—
Access key takeout warning:
The driver exits the vehicle with
the access key fob and closes
the driver’s door while the push-
button ignition switch is in a
position other than “OFF” and
the select lever is in a position
other than the “P” position.
Switch the push-button ignition
switch to “OFF”, and get out of
the vehicle.
INSTRUMENTS AND CONTROLS
178
(181,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
Inside
warning
chime
Outside
warning
chime
Operation in-
dicator on
push-button
ignition
switch
Status Action
Ding
Beep,
beep, beep
(3 times)
—
Passenger access key take-
out warning:
A fellow passenger exits the
vehicle with the access key fob
and closes a door other than the
driver’s door while the push-
button ignition switch is in a
position other than “OFF”.
Return the access key fob to
inside the vehicle, or switch the
push-button ignition switch to
“OFF”.
Long beep
(continu-
ous)
Long beep
(continu-
ous)
—
Access key takeout without
“P” position warning:
The driver exits the vehicle with
the access key fob and closes
the driver’s door while the push-
button ignition switch is in a
position other than “OFF” and
the select lever is in a position
other than the “P” position.
Shift the select lever to the “P”
position, switch the push-button
ignition switch to “OFF” and exit
the vehicle.
Long beep
(continu-
ous)
— —
Select lever position warning:
. Case 1: The engine is
turned off by pressing the
push-button ignition switch
while the select lever is in a
position other than the “P”
position.
. Case 2: The driver’s door is
opened while the push-but-
ton ignition switch is in a
position other than “OFF”
and the select lever is in a
position other than the “P”
position.
. Case 1: Start the engine,
shift the select lever to the
“P” position, switch the
push-button ignition switch
to “OFF” and exit the vehi-
cle.
. Case 2: Shift the select
lever to the “P” position,
switch the push-button igni-
tion switch to “OFF” and exit
the vehicle.
Ding — —
The battery of the access key
fob is low.
Replace the battery of the ac-
cess key fob.
For details, refer to “
Replacing
Battery” �P507.
Ding —
Flashes in
green
(15 seconds
max)
Steering lock warning:
The engine start procedure is
performed, but the steering is
still locked.
While turning the steering wheel
right and left lightly, depress the
brake pedal and press the push-
button ignition switch.
Ding —
Flashes in
orange
System malfunction warning:
A malfunction is detected in the
power system or steering lock.
Contact a SUBARU dealer im-
mediately and have the vehicle
inspected.
– CONTINUED –
INSTRUMENTS AND CONTROLS
179
3
(182,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
SECURITY INDICATOR
LIGHT
s03ae16
This indicator light shows the status of the
alarm system. It also indicates operation
of the immobilizer system.
Alarm system
s03ae1601
It blinks to show the driver the operational
status of the alarm system. For detailed
information, refer to “Alarm System”
�P136.
Immobilizer system
s03ae1602
The security indicator light starts blinking
in the following conditions.
. Immediately after the push-button
ignition switch is turned to the “OFF”
position.
. Immediately after the driver’s door is
opened or closed when all of the
following conditions are met.
– The push-button ignition switch is
in the “ON” or “ACC” position.
– The engine is not running.
In the event that an unauthorized key is
used (for example, the key is unregis-
tered or the ID code does not match), the
power is not switched to “ON” and the
security indicator light continues blinking.
NOTE
. The security indicator light remains off
in the following conditions. It means
that the matching of the ID code is
completed and the immobilizer sys-
tem is deactivated, and it does not
indicate a malfunction.
– While the engine is running
– The push-button ignition switch
has been turned to the “ON” or
“ACC” position and the driver’s
door has not been opened or
closed
. Even if a malfunction occurs, such as
the security indicator light flashes
irregularly, it will not affect the func-
tionality of the immobilizer system.
SELECT LEVER/GEAR POSI-
TION INDICATOR
s03ae43
S_308068-W
Upshift indicator
Downshift indicator
Select lever/gear position indicator
The select lever position is displayed on
the indicator.
When the manual mode is selected, the
gear position indicator, which shows the
current gear selection, and the available
up shift/downshift indicator light up. Refer
to “Selection of Manual Mode” �P325.
TURN SIGNAL INDI-
CATOR LIGHTS
s03ae20
These lights show the operation of the
turn signal or lane change signal.
If the indicator lights do not blink or blink
rapidly, the turn signal bulb may be
burned out. Replace the bulb as soon as
possible. Refer to “Replacing Bulbs”
�P504.
INSTRUMENTS AND CONTROLS
180
(183,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
HIGH BEAM INDICATOR
LIGHT
s03ae21
This light shows that the headlights are in
the high beam mode.
This indicator light also illuminates when
operating the headlight flasher.
HIGH BEAM ASSIST IN-
DICATOR
s03ae83
This indicator appears when the high
beam assist function is activated. For
details about the high beam assist func-
tion, refer to “High Beam Assist Function”
�P215.
LED HEADLIGHT WARN-
ING LIGHT
s03ae76
This light illuminates if the LED headlights
malfunction. Have your vehicle inspected
at a SUBARU dealer as soon as possible.
STEERING RESPONSIVE
HEADLIGHT OFF INDI-
CATOR LIGHT
s03ae89
This light illuminates when the Steering
Responsive Headlight function is off. For
details about the on/off setting, refer to
“Vehicle” �P206.
STEERING RESPON-
SIVE HEADLIGHT
WARNING LIGHT
s03aeb2
The light illuminates when a malfunction
occurs in the Steering Responsive
Headlight. Refer to “Steering Responsive
Headlight (SRH)” �P219.
HEADLIGHT INDICATOR
LIGHT
s03ae24
This indicator light illuminates under the
following conditions.
. The light switch is turned to the “
”
or “
” position.
. The light switch is in the “AUTO”
position and the headlights illuminate
automatically.
FRONT FOG LIGHT INDI-
CATOR LIGHT
s03ae25
This indicator light illuminates while the
front fog lights are illuminated.
AUTO START STOP
WARNING LIGHT (Yellow)
s03ae65
CAUTION
If the Auto Start Stop warning light is
illuminated in yellow, there may be a
malfunction in the Auto Start Stop
system. When starting the engine
again after the Auto Start Stop warn-
ing light illuminates, if it is still illumi-
nating, we recommend that you have
your vehicle inspected at a SUBARU
dealer as soon as possible.
The Auto Start Stop warning light will
illuminate in yellow if you open the engine
hood when the engine has been tem-
porarily stopped by the Auto Start Stop
system.
In this case, to ensure safety, the engine
will not be automatically restarted, even if
you release the brake pedal. Use normal
operation to restart the engine.
AUTO START STOP OFF
INDICATOR LIGHT
s03aeb3
This light will illuminate when the Auto
Start Stop OFF switch is pressed to
prevent the Auto Start Stop system from
operating. It will turn off when the Auto
Start Stop OFF switch is pressed once
more to enable operation of the Auto Start
Stop system. For details about the
setting, refer to “To turn on/off the Auto
Start Stop system” �P351.
– CONTINUED –
INSTRUMENTS AND CONTROLS
181
3
(184,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
CAUTION
If the Auto Start Stop OFF indicator
light does not illuminate when the Auto
Start Stop OFF switch is pressed, we
recommend that you contact a
SUBARU dealer for an inspection as
soon as possible.
AUTO START STOP INDI-
CATOR LIGHT (Green)
s03ae66
This indicator light illuminates when the
engine has been temporarily stopped by
the Auto Start Stop system. It will turn off
when the engine is restarted.
AUTO START STOP NO
ACTIVITY DETECTED IN-
DICATOR LIGHT
s03aea3
When a vehicle is stopped, the indicator
light illuminates when the operating con-
dition of the Auto Start Stop system is not
met. The light will turn off when the
vehicle starts driving. Refer to “Non-
operational conditions” �P349.
ELECTRIC DAMPER
SYSTEM WARNING
LIGHT (If Equipped)
s03aeb8
This light illuminates if the Electric Dam-
per System malfunctions.
WARNING
When the Electric Damper System
warning light illuminates, have the
vehicle inspected at an authorized
SUBARU dealer.
X-MODE INDICATOR
s03ae68
S_308346-W
Models with 1 mode
Models with 2 modes (DEEP SNOW/
MUD, SNOW/DIRT)
This indicator appears while X-MODE is
activated. It will disappear when X-MODE
is deactivated. Refer to “To Activate/
Deactivate X-MODE” �P336.
VEHICLE DETECTED IN
NEIGHBORING LANE INDICA-
TOR
s03aec2
S_308481-W
When a vehicle is detected (white area
with yellow outline is indicated)
When the turn signal lever is being
operated while a vehicle is detected
(yellow area is indicated)
When BSW/RCTW detects a vehicle
approaching from behind in the neigh-
boring lane, the system displays a vehicle
detected in neighboring lane indicator on
the screen. For details, refer to “BSW/
INSTRUMENTS AND CONTROLS
182
(185,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
RCTW” �P367.
HILL DESCENT CON-
TROL INDICATOR LIGHT
s03ae69
This indicator appears while the hill
descent control function is in standby. It
will flash while the hill descent control
function is operating. It will disappear
when the hill descent control function is
not available. Refer to “Hill Descent
Control Function” �P337.
BSW/RCTW WARNING
INDICATOR
s03ae80
This warning indicator appears on the
instrument cluster display when the BSW
(Blind Spot Warning) or RCTW (Rear
Cross Traffic Warning) is malfunctioning
for any reason. For further details, refer to
“BSW/RCTW Warning Indicator” �P373.
If this indicator remains displayed, have
your vehicle inspected by your SUBARU
dealer as soon as possible.
BSW/RCTW OFF INDICA-
TOR
s03ae86
This indicator appears on the instrument
cluster display when “Blind Spot Warning
(BSW)/Rear Cross Traffic Warning
(RCTW)” is touched to deactivate BSW
(Blind Spot Warning) and RCTW (Rear
Cross Traffic Warning), or when the BSW/
RCTW is suspended temporarily. For
details, refer to “BSW/RCTW OFF Indi-
cator” �P373.
ICY ROAD SURFACE
WARNING INDICATOR
s03ae82
When the outside temperature is ap-
proximately 37°F (3°C) or less, the icy
road surface warning indicator will illumi-
nate to inform the driver that the road
surface may be frozen.
NOTE
. The outside temperature indicator
shows the temperature in the area
around the sensor. However, the
temperature may not be indicated
correctly or the update may be de-
layed in the following conditions.
– While parking or driving at low
speeds
– When the outside temperature
changes suddenly (example: when
going in and out of an underground
parking area or when passing
through a tunnel)
– When starting the engine after
being parked for a certain period of
time
. The icy road surface warning indicator
should be treated only as a guide. Be
sure to check the condition of the road
surface before driving.
. Once the icy road surface warning
indicator appears, it will not disappear
unless the outside temperature has
increased to approximately 41°F (5°C)
or higher.
RAB WARNING INDI-
CATOR
s03ae91
This indicator illuminates if the Reverse
Automatic Braking (RAB) system mal-
functions. Refer to “Reverse Automatic
Braking (RAB) System” �P375.
RAB OFF INDICATOR
s03ae92
This indicator illuminates when the Re-
verse Automatic Braking (RAB) system is
turned OFF, or when the Reverse Auto-
matic Braking (RAB) system is sus-
pended temporarily. Refer to “Reverse
Automatic Braking (RAB) System”
�P375.
– CONTINUED –
INSTRUMENTS AND CONTROLS
183
3
(186,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
PROXIMITY WARNING
DETECTION OFF INDI-
CATOR
s03ae93
This indicator illuminates when the
Proximity Warning Detection is turned
OFF. For the setting procedure, refer to
“Reverse Automatic Braking (RAB) Sys-
tem ON/OFF Setting” �P386.
DISTRACTION MITIGA-
TION SYSTEM OPERA-
TION INDICATOR LIGHT
(Green)
s03aea4
This indicator illuminates when the Dis-
traction Mitigation System is activated.
Refer to “Distraction Mitigation System
operation indicator light (green)” �P398.
DISTRACTION MITIGA-
TION SYSTEM WARNING
LIGHT (Yellow)
s03aeb6
This warning light illuminates if the Dis-
traction Mitigation System malfunctions.
We recommend that you have your
vehicle inspected at a SUBARU dealer as
soon as possible. Refer to “Distraction
Mitigation System warning light (yellow)”
�P398.
DISTRACTION MITIGA-
TION SYSTEM OFF INDI-
CATOR LIGHT
s03aea5
This indicator illuminates when “Distrac-
tion Mitigation System” is touched to
deactivate the Distraction Mitigation
System. Refer to “Distraction Mitigation
System OFF indicator light” �P398.
DISTRACTION MITIGA-
TION SYSTEM TEMPOR-
ARY STOP INDICATOR
LIGHT
s03aea6
This indicator illuminates when the Dis-
traction Mitigation System is temporarily
stopped. Refer to “Distraction Mitigation
System temporary stop indicator light”
�P398.
NOTE
The Distraction Mitigation System stops
temporarily when the temperature of the
Distraction Mitigation System unit is high.
FRONT CROSS TRAFFIC
BRAKING WARNING IN-
DICATOR (If Equipped)
s03aeb9
The Front Cross Traffic Braking warning
indicator illuminates if there is a mal-
function in the Front Cross Traffic Infor-
mation and Front Cross Traffic Braking.
We recommend that you have your
vehicle inspected at a SUBARU dealer as
soon as possible. Refer to “Front Cross
Traffic Information” �P360.
FRONT CROSS TRAFFIC
BRAKING OFF INDICA-
TOR (If Equipped)
s03aec1
This indicator illuminates when you touch
“Brake and Warning” on the screen to
deactivate the Front Cross Traffic Infor-
mation and Front Cross Traffic Braking.
Refer to “EyeSight/Driving Assistance”
�P202.
INSTRUMENTS AND CONTROLS
184
(187,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
3-6. INSTRUMENT CLUSTER
DISPLAY
s03bn
WARNING
Always pay adequate attention to safe
driving when operating the instrument
cluster display while the vehicle is in
motion. When operation of the instru-
ment cluster display interferes with
your ability to concentrate on driving,
stop the vehicle before performing
operations on the screen. Also, do not
concentrate on the display while driv-
ing. Doing so may cause you to look
away from the road and could result in
an accident.
Various information will be shown on the
instrument cluster display. Also, a warn-
ing message will appear on the display if a
malfunction is detected. In addition, sev-
eral settings for the displayed content can
be performed.
– CONTINUED –
INSTRUMENTS AND CONTROLS
185
3
(188,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
S_308347-W
Meter information screen (Refer to
“Meter Information Screen” �P189.)
Warning and indicator (Refer to
“Warning and Indicator Lights”
�P162.)
Warning screen (Refer to “Warning
Screen” �P189.)
EyeSight screen*
Digital speed screen (Refer to “Digital
Speed Screen” �P193.)
Double trip meter (Refer to “Double Trip
Meter” �P159.)
Odometer screen (Refer to “Odometer”
�P158.)
X-MODE indicator (Refer to “X-MODE”
�P335.)
Select lever/gear position indicator
(Refer to “Select Lever/Gear Position
Indicator” �P180.)
Basic screen (Refer to “Basic Screens”
�P191.)
Warning screen (Refer to “Warning
Screen” �P189.)
Telltale screen (Refer to “Telltale
Screen” �P190.)
*: For details, refer to the separate EyeSight
Owner’s Manual.
INSTRUMENTS AND CONTROLS
186
(189,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
BASIC OPERATION
s03bn01
S_308348-W
By operating or of the control
switches, the screens can be changed.
If there are some useful messages, such
as vehicle information, warning informa-
tion, etc., they will interrupt the current
screen, and appear on the display
accompanied by a beep. If such a screen
is displayed, take proper action according
to the message shown on the screen.
S_308126-W
The warning screen will return to the
original screen after a few seconds. While
the
information reminder is shown on
the display, it may be possible to display
the warning screen again. To recall the
message marked with
on the display,
press and hold the
switch on the
steering wheel.
– CONTINUED –
INSTRUMENTS AND CONTROLS
187
3
(190,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
INSTRUMENT CLUSTER DISPLAY MODE
s03bn16
S_308349-W
Classic mode
In classic mode, the analogue tach-
ometer and speedometer display re-
spectively.
Map mode*
1
In map mode, the tachometer and
speedometer are displayed together
with the genuine SUBARU navigation
system.
EyeSight mode*
2
The EyeSight mode screen displays
the vehicle operating status and sur-
roundings.
Calm mode
In calm mode, only the minimum
necessary information is displayed.
*1: For details about the audio and navigation
system, refer to the Owner’s Manual
supplement for the audio and navigation
system.
*2: For details about the EyeSight system, refer
to the Owner’s Manual supplement for the
EyeSight system.
There are four different screen modes to
choose from. To change the screen
mode, press the “
” switch or operate
the Center Information Display settings.
Refer to “Displays” �P204.
NOTE
. When a warning screen or a turn-by-
turn display is displayed, the screen
mode cannot be switched.
. Depending on the mode, the display
location of such things as the instru-
ments, basic screen, and EyeSight
screen will change.
INSTRUMENTS AND CONTROLS
188
(191,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
WELCOME SCREEN (Opening
Animation) AND GOOD-BYE
SCREEN (Ending Animation)
s03bn08
Welcome screen and Good-bye screen
are motion graphics displayed on the
instrument cluster display and center
information display upon entering and
exiting the vehicle.
When the driver’s door is opened and
closed after unlocking the door, the
welcome screen (opening animation) will
appear on the instrument cluster display
for approximately 20 seconds.
When the ignition switch is turned to the
“OFF” position, the instrument cluster
display gradually turns off by showing
good-bye screen (ending animation).
NOTE
. The welcome screen and the good-
bye screen may differ in the actual
words and appearance.
. The basic screen will be shown when
the ignition switch is turned to the “ON”
position while the welcome screen is
displayed.
. Once the welcome screen appears, it
takes a certain period of time to
display it again.
. If the ignition switch is operated after
unlocking the driver’s door, the wel-
come screen will not appear even
when the driver’s door is opened and
closed.
. The welcome screen will disappear
when you lock the driver’s door by
using the remote keyless entry system
or the keyless access function while
the welcome screen is displayed.
. The welcome screen including the
audio/navigation unit can be set to on
or off.
WARNING SCREEN
s03bn05
Example of warning
S_307548-W
If there is a warning message or a
maintenance notification, it will appear on
the instrument cluster display. Take the
appropriate actions based on the mes-
sages indicated.
METER INFORMATION
SCREEN
s03bn12
This screen informs the driver of various
information.
The meter information screen can be
changed. For details, refer to “Displays”
�P204.
Clock and temperature
s03bn1202
S_308256-W
This screen displays the clock and out-
side temperature.
– CONTINUED –
INSTRUMENTS AND CONTROLS
189
3
(192,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
NOTE
. The clock can be displayed in either
12-hour display or 24-hour display.
For details, refer to “Setting 12-Hour
Display/24-Hour Display” �P211.
. The outside temperature indicator
shows the temperature in the area
around the sensor. However, the
temperature may not be indicated
correctly or the update may be de-
layed in the following conditions.
– While parking or driving at low
speeds
– When the outside temperature
changes suddenly (example: when
going in and out of an underground
parking area or when passing
through a tunnel)
– When starting the engine after
being parked for a certain period of
time
. You can set the temperature units to
be displayed in Fahrenheit (°F) or
Celsius (°C). For details, refer to
“Displays” �P204.
Compass (if equipped)
s03bn1203
S_308257-W
The direction of the vehicle is displayed.
TELLTALE SCREEN
s03bn09
S_308350-W
Telltale screen
When the corresponding situation occurs,
the following telltales will be displayed on
the telltale screen.
NOTE
. When there is warning information to
display, it will be displayed in five
warning indicators, starting on the left
in ascending order of severity.
. If there are 6 or more warning mes-
sages to display, the indicators will be
displayed in sequential order.
Mark Name Page
Door open indicator light 174
Engine hood open warning
light
174
LED headlight warning
light
181
Steering Responsive
Headlight OFF indicator
light
181
Steering Responsive
Headlight warning light
181
Engine low oil level warn-
ing light
168
AT OIL TEMP warning light 169
All-Wheel Drive warning
light
174
INSTRUMENTS AND CONTROLS
190
(193,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
Mark Name Page
RAB warning indicator 183
Proximity Warning Detec-
tion OFF indicator
184
BSW/RCTW warning indi-
cator
183
BSW/RCTW OFF indica-
tor
183
Hill descent control indica-
tor light
183
Auto Start Stop warning
light (yellow)
181
Auto Start Stop indicator
light (green)
182
Auto Start Stop OFF indi-
cator light
181
Auto Start Stop No Activity
Detected indicator light
182
Windshield washer fluid
warning light
174
Distraction Mitigation Sys-
tem operation indicator
light (green)
184
Distraction Mitigation Sys-
tem warning light (yellow)
184
Distraction Mitigation Sys-
tem OFF indicator light
184
Distraction Mitigation Sys-
tem temporary stop indi-
cator light
184
Icy road surface warning
light
183
Electric damper system
warning light (if equipped)
182
Front Cross Traffic Braking
warning indicator (if
equipped)
184
Front Cross Traffic Braking
OFF indicator (if equipped)
184
BASIC SCREENS
s03bn06
By operating the or switch on the
steering wheel, you can change the
screen that is always displayed.
ECO gauge:
S_308382-W
The ECO gauge shows the difference
between the average rate of fuel con-
sumption since the trip meter was last
reset and the current rate of fuel con-
sumption.
The ECO gauge indicates the current fuel
efficiency as shown in the following chart.
Displayed unit
Needle position
“+” side “−” side
MPG Better Poorer
l/100km Poorer
Better
NOTE
. The ECO gauge shows only an
approximate indication.
. After resetting the trip meter, the
average rate of fuel consumption is
not shown until driving for approxi-
mately 10 seconds. Until that time, the
ECO gauge does not operate.
– CONTINUED –
INSTRUMENTS AND CONTROLS
191
3
(194,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
Average fuel consumption screen:
S_308383-W
AVG: Average fuel consumption
This screen displays the average rate of
fuel consumption since the trip meter was
last reset.
NOTE
The driving range on the remaining fuel is
only a guide. The indicated value may
differ from the actual driving range on the
remaining fuel, so you must immediately
fill the tank when the low fuel warning light
illuminates.
Current fuel consumption screen:
S_308384-W
: Current fuel consumption
NOTE
The driving range on the remaining fuel is
only a guide. The indicated value may
differ from the actual driving range on the
remaining fuel, so you must immediately
fill the tank when the low fuel warning light
illuminates.
Driving information screen:
S_308085-W
: Journey time
: Journey distance
This screen displays the journey time (the
time that has elapsed since the ignition
switch was turned to the “ON” position)
and journey distance (the distance that
has been driven since the ignition switch
was turned to the “ON” position).
TPMS screen (except for Canada-
spec. models):
S_308086-W
This screen displays each tire pressure.
When a tire is deflated, the deflated tire
and the tire pressure will be displayed on
the screen in yellow.
NOTE
. The tire pressure values are displayed
several minutes after driving.
. You can set the tire pressure units. For
details about setting the units, refer to
“Displays” �P204.
INSTRUMENTS AND CONTROLS
192
(195,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
. Once the tire pressure monitoring
system detects the low tire pressure,
the tire pressure values will display in
yellow until the system detects the
normal tire pressure.
. Immediately adjust the tire pressure
when the warning light illuminates.
When the tire pressure monitoring
system detects the adjusted tire pres-
sure, the warning light will turn off and
the tire pressure values will turn to
white.
. For information about the specified
value of the air pressure, refer to
“Tires” �P517.
Navigation screen (if equipped):
S_308087-W
When the route guidance is set in the
navigation system, this item shows the
navigation route information. For details
about the navigation system, refer to the
separate navigation/audio Owner’s Man-
ual.
Audio screen:
S_308088-W
The audio screen shows the status of
audio information. For details about the
audio system, refer to the separate nav-
igation/audio Owner’s Manual.
DIGITAL SPEED SCREEN
s03bn11
S_308351-W
Speed limit indicator
Vehicle speed
This screen displays the current vehicle
speed.
INSTRUMENTS AND CONTROLS
193
3
(196,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
3-7. CENTER INFORMATION
DISPLAY (CID) FEATURES
s03bs
WARNING
Always pay attention to safe driving
when operating the center information
display while the vehicle is in motion.
When operation of the center infor-
mation display is disturbing your
awareness and ability to concentrate
on driving, stop the vehicle in a safe
place before performing operations on
the display. Also, do not concentrate
on the display while driving. Doing so
could result in an accident.
All information is displayed on the center
information display, including vehicle
settings, vehicle status, navigation sys-
tem (if equipped) operation and audio
operation.
Items Page
Maintenance informa-
tion
209
Rear view camera 362
Surround View Moni-
tor*
353
Navigation system*
Refer to the separate nav-
igation/audio Owner’s
Manual.
Audio/telephone
Refer to the separate nav-
igation/audio Owner’s
Manual.
EyeSight
Refer to the Owner’s Man-
ual supplement for the
EyeSight system.
*: If equipped
The center information display can also
be used to set and initialize the center
information display itself.
NOTE
. When the vehicle is in motion, certain
functions and selections may not be
available.
. The language and units for both the
center information display and the
instrument cluster display can be
changed. For details, refer to “Dis-
plays” �P204.
. The images displayed in this Owner’s
Manual are sample images. The ac-
tual image may vary depending on the
region and vehicle specifications.
WELCOME SCREEN AND
GOOD-BYE SCREEN
s03bs02
Welcome screen and Good-bye screen
are motion graphics displayed on the
instrument cluster display and center
information display upon entering and
exiting the vehicle.
Welcome screen
s03bs0201
When the driver’s door is opened and
closed, the welcome screen will appear
for a short time.
NOTE
. The welcome screen will disappear
when the ignition switch is turned to
the “ON” position while the welcome
screen is shown.
. For a certain period of time after the
welcome screen has once appeared,
it may not appear again even when the
driver’s door is opened and closed.
This does not indicate a malfunction.
Good-bye screen
s03bs0202
The good-bye screen will be displayed
under the following conditions.
. The driver’s door is opened after the
ignition switch is put in the “OFF”
position.
. 1 minute have passed after the ignition
switch is put in the “OFF” position with
the driver’s door closed.
. 1 minute have passed when the
hands-free phone is used after the
ignition switch is put in the “OFF”
position.
INSTRUMENTS AND CONTROLS
194
(197,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
. The battery voltage is low when the
ignition switch is put in the “OFF”
position.
TOUCH SCREEN OPERATIONS
s03bs04
The center information display has a
touch screen. Operations are performed
by touching the touch screen directly.
Touch
s03bs0401
S_308352-W
Quickly touch and release once.
Drag
s03bs0402
S_308353-W
Touch the screen and move the screen to
the desired position.
Swipe
s03bs0403
S_308354-W
Quickly move the screen by swiping with
your finger.
NOTE
Swipe operations may not be performed
smoothly in high altitudes.
ON/OFF setting
s03bs0404
S_308355-W
ON
OFF
Touch
/ to turn the function OFF or
ON.
– CONTINUED –
INSTRUMENTS AND CONTROLS
195
3
(198,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
Item selecting
s03bs0405
S_308356-W
Touch the preferred setting.
INSTRUMENTS AND CONTROLS
196
(199,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
3-8. CENTER INFORMATION DISPLAY
s03bx
S_308374-W
Audio icon (Refer to the separate
navigation/audio Owner’s Manual.)
Navigation icon*
1
(Refer to the sepa-
rate navigation/audio Owner’s Man-
ual.)
HOME icon (Refer to “HOME Icon”
�P198.)
Information bar (Refer to “Information
Bar” �P198.)
Status bar (Refer to “Status Bar”
�P198 and the separate navigation/
audio Owner’s Manual.)
Voice assistance icon (Refer to the
separate navigation/audio Owner’s
Manual.)
Main screen (Refer to “Shortcut Icons”
�P199.)
Driver profile icon (Refer to “Driver
Profile Icon” �P198.)
Setting icon (Refer to “Setting”
�P200.)
Phone icon (Refer to the separate
navigation/audio Owner’s Manual.)
*1: if equipped
While the ignition switch is in the “ACC” or
“ON” position, the touch panel will acti-
vate.
– CONTINUED –
INSTRUMENTS AND CONTROLS
197
3
(200,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
HOME ICON
s03bx01
S_308357-W
To display the main screen, touch
(HOME).
Swipe right/left on the main screen to
change the widget screen, apps screen,
and calm screen. For details, refer to the
separate navigation/audio Owner’s Man-
ual.
OUTSIDE TEMPERATURE AND
CLOCK
s03bx02
The outside temperature and clock are
displayed on the main screen or status
bar.
NOTE
. The outside temperature indicator
shows the temperature in the area
around the sensor. However, the
temperature may not be indicated
correctly or the update may be de-
layed in the following conditions.
– While parking or driving at low
speeds
– When the outside temperature
changes suddenly (example: when
going in and out of an underground
parking area or when passing
through a tunnel)
– When starting the engine after
being parked for a certain period of
time
. You can set the temperature units to
be displayed in Fahrenheit (°F) or
Celsius (°C). For details, refer to
“Displays” �P204.
. Touch the clock on the screen to
display the clock setting screen. Refer
to “Clock” �P210.
INFORMATION BAR
s03bx03
S_308358-W
Information such as active features is
shown on the information bar. For some
functions, touching the display shows the
operation menu.
STATUS BAR
s03bw02
The outside temperature, clock and sta-
tus icon are displayed on the status bar.
For details, refer to “Outside Temperature
and Clock” �P198 and the separate
navigation/audio Owner’s Manual.
DRIVER PROFILE ICON
s03bx07
S_308375-W
Touch to confirm the driver profile and
manage devices.
INSTRUMENTS AND CONTROLS
198
(201,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
Driver profile
s03bx0701
Touch the driver profile screen to register
user. For details, refer to “Distraction
Mitigation System” �P389.
Manage devices
s03bx0702
Touch the manage devices screen to pair
your vehicle’ system with a device that
uses Apple CarPlay or a similar applica-
tion. For details, refer to the separate
navigation/audio Owner’s Manual.
HOW TO CHANGE THE
SCREEN SETTINGS
s03bx06
Set and adjust the brightness and con-
trast of the center information display.
Brightness/Contrast
s03bx0601
1. Touch (Settings).
2. ? “Displays”
3. ? “Brightness/Contrast”
S_308359-W
4. Adjust the brightness and contrast by
dragging
or touching +/−.
NOTE
“Brightness Adjustment” can only be
adjusted when “Brightness Dial Control”
is off. Refer to “Displays” �P204.
SHORTCUT ICONS
s03bx05
S_308487-W
This Owner’s Manual includes explana-
tions of the vehicle settings.
To access the shortcut icons, touch
(HOME) and then swipe to select the
apps screen.
For details about the following menu,
refer to the separate navigation/audio
Owner’s Manual.
. Apple CarPlay
. Phone
. Add Shortcut
For details about the following menu,
refer to the Owner’s Manual supplement
for MySubaru Connected Services.
. MySubaru
Valet mode icon
s03bx0501
For details, refer to “Valet Mode” �P211.
– CONTINUED –
INSTRUMENTS AND CONTROLS
199
3
(202,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
Display Off icon
s03bx0502
Activation of the display off mode:
Touch “Display Off”.
S_308360-W
Deactivation of the display off mode:
Press and hold the volume knob to turn
the screen back on.
S_308361-W
SETTING
s03bx08
This Owner’s Manual includes explana-
tions of the vehicle settings.
To access the settings menu, touch
(Settings).
S_308362-W
For details about the following menu,
refer to the separate navigation/audio
Owner’s Manual.
. Manage Devices
. Phone
. Voice Assistance
. Network Connection
. Software
Sound
s03bx0801
Configure the sound settings of the audio/
navigation system and the warning alerts.
1. Touch
(Settings).
2. ? “Sound”
3. Select the preferred menu.
S_308363-W
INSTRUMENTS AND CONTROLS
200
(203,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
The setting adjustments to the following items can be manually changed to meet your
personal requirements.
Item
Available settings
Page reference for
the vehicle system
operation
1st menu 2nd menu 3rd menu
Equalizer/Balance
and Fade
Equalizer —
Setting and adjust-
ment of the equal-
izer
*
1
Balance and Fade —
Setting and adjust-
ment of the Balance
and Fade
*
1
Volume Controls
Navigation Gui-
dance Volume*
3
—
Setting and adjust-
ment of the navi-
gation guidance vo-
lume
*
1
System Notification
Volume*
3
—
Setting and adjust-
ment of the system
notification volume
*
1
Touchscreen Beep — ON/OFF *
1
Touchscreen Beep
Volume
—
Setting and adjust-
ment of the beep
sound volume
*
1
Safety Warning Vo-
lume
— High/Mid/Low 372, 386 and *
2
Ringtone Volume —
Setting and adjust-
ment of the ringtone
volume
*
1
Caller Voice Volume —
Setting and adjust-
ment of the caller
voice volume
*
1
In-Call Voice Vo-
lume
—
Setting and adjust-
ment of the in-call
voice volume
*
1
Voice Assistance
Volume
—
Setting and adjust-
ment of the voice
assistance volume
*
1
Harmonizer*
3
— —
Select to enable/
disable the function.
*
1
Speed Volume
Control*
3
— — High/Mid/Low/Off *
1
Volume Level Mem-
ory
— — ON/OFF
*
1
*1: For details about the audio and navigation system, refer to the Owner’s Manual supplement for the audio and
navigation system.
*2: For details about the EyeSight system, refer to the Owner’s Manual supplement for the EyeSight system.
*3: if equipped
– CONTINUED –
INSTRUMENTS AND CONTROLS
201
3
(204,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
Profiles
s03bx0802
Register, edit and switch driver profiles.
For details, refer to “Using the Distraction
Mitigation System” �P398.
EyeSight/Driving Assistance
s03bx0803
Perform the EyeSight system setting and
driving assistance function setting.
1. Touch
(Settings).
2. ? “EyeSight/Driving Assistance”
3. Select the preferred menu.
S_308364-W
INSTRUMENTS AND CONTROLS
202
(205,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
The setting adjustments to the following items can be manually changed to meet your
personal requirements.
Item
Available settings
Page reference for
the vehicle system
operation
1st menu 2nd menu 3rd menu
Proactive Driver
Assist
Acceleration Over-
ride Assist
— ON/OFF *
1
Collision Avoidance
Pre-Collision Brak-
ing
Brake and Warning ON/OFF *
1
Warning Timing Far/Normal/Near *
1
Proximity Warning
Detection
Warning ON/OFF *
1
Blind Spot Warning
(BSW)/Rear Cross
Traffic Warning
(RCTW)
— ON/OFF 374
Lane Departure
Emergency Lane
Keeping Assist
— ON/OFF *
1
Lane Departure
Prevention
— ON/OFF *
1
Lane Departure
Warning
— ON/OFF *
1
Warning Timing — Normal/Delayed *
1
Cruise Manage-
ment
Cruise Control
Driving Mode
Eco/Comfort/Stan-
dard/Dynamic
*
1
Forward Vehicle
Alert
ON/OFF *
1
Pre-curve Speed
Control*
2
ON/OFF *
1
Camera
Steering Angle
Guides
— ON/OFF 365 and 356
Camera Off Delay — ON/OFF 363 and 354
Other Safety/Assis-
tance Controls
Forward Vehicle
Movement
— ON/OFF *
1
EyeSight Assist
Monitor
— ON/OFF *
1
Rest Suggestions*
2
— ON/OFF *
1
Left/Right Driving — — Right Side/Left Side
*
1
*1: For details about the EyeSight system, refer to the Owner’s Manual supplement for the EyeSight system.
*2: if equipped
– CONTINUED –
INSTRUMENTS AND CONTROLS
203
3
(206,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
Displays
s03bx0804
Configure the center information display
setting and instrument cluster setting.
1. Touch
(Settings).
2. ? “Displays”
3. Select the preferred menu.
S_308365-W
INSTRUMENTS AND CONTROLS
204
(207,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
The setting adjustments to the following items can be manually changed to meet your
personal requirements.
Item
Available settings
Page reference for
the vehicle system
operation
1st menu 2nd menu 3rd menu
Display Off — — Turn the screen off. 200
Brightness/Contrast
Brightness Dial
Control
— ON/OFF
161 and 199
Brightness Adjust-
ment
—
Set and adjust the
brightness of the
display.
Contrast Adjust-
ment
—
Set and adjust the
contrast of the dis-
play.
Center Screen
Home Screen Set-
tings
—
Edit the shortcut
icon on the home
screen.
*
1
Instrument Cluster
Header options —
Outside Tempera-
ture/Clock, Com-
pass/Clock*
2
, None
189
Display Mode —
Classic/Map*
2
/
EyeSight/Calm
188
Route Guidance
Alerts
— ON/OFF *
1
Units
Measurement —
mi, mph, Gallons/
km, km/h, Liters
158 and 185
Temperature — °C/°F 198
Tire Pressure*
2
— PSI/kPa 191
Language — —
English/Français/
Español
185 and 194
*1: For details about the audio and navigation system, refer to the Owner’s Manual supplement for the audio and
navigation system.
*2: if equipped
– CONTINUED –
INSTRUMENTS AND CONTROLS
205
3
(208,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
Vehicle
s03bx0805
Configure the vehicle setting.
1. Touch
(Settings).
2. ? “Vehicle”
3. Select the preferred menu.
S_308366-W
INSTRUMENTS AND CONTROLS
206
(209,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
The setting adjustments to the following items can be manually changed to meet your
personal requirements.
Item
Available settings
Page reference for
the vehicle system
operation
1st menu 2nd menu 3rd menu
Automatic Vehicle
Shut Down
— — ON/OFF 312
Distraction Mitiga-
tion System
Distraction Mitiga-
tion System
— ON/OFF
389
User Recognition — ON/OFF
Auto Retract Driver
Seat*
1
— ON/OFF
Seat and Mirror Po-
sition*
1
—
Reregister the dri-
ver’s position.
Lighting
Interior Light Timing —
30 seconds/20 sec-
onds/10 seconds/
Off
276
Welcome Lighting
Approach Duration
90 seconds/60 sec-
onds/30 seconds/
Off
214
Departure Duration
90 seconds/60 sec-
onds/30 seconds/
Off
Auto Headlights
Daylight Sensitivity
High/Medium/Low/
Minimal
213
Wiper Sync ON/OFF 213
Steering Respon-
sive Headlights
(SRH)
— ON/OFF 219
Keyless Entry
Alert Sound — ON/OFF 128 and 131
Hazard Flashers — ON/OFF 128 and 131
Door Unlock — Driver Door Only/All 122
Rear Gate/Trunk
Unlock
—
Rear Gate/Trunk
Only, All
122
Rear Window De-
fogger
— —
Continuous/15 min-
utes
226
One-Touch Lane
Change
— — ON/OFF 221
Auto Door Locks
Lock Behavior —
Shift from Park/Ve-
hicle Speed/Off
134
Unlock Behavior —
Driver Door Open/
Ignition Off/Shift into
Park/Off
Rear Seat Remin-
der
— — ON/OFF
67
– CONTINUED –
INSTRUMENTS AND CONTROLS
207
3
(210,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
Item
Available settings
Page reference for
the vehicle system
operation
1st menu 2nd menu 3rd menu
Side Mirrors*
1
Automatic Folding*
1
— ON/OFF 247
Reverse Tilt*
1
— ON/OFF 246
Power Rear Gate
Height Memory
— — ON/OFF
146
*1: if equipped
INSTRUMENTS AND CONTROLS
208
(211,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
Time/date
s03bx0806
Set and adjust the time and date. For
details, refer to “Clock” �P210.
Maintenance
s03bx0807
You can set maintenance reminders.
1. Touch
(Settings).
2. ? “Maintenance”
3. Select the preferred menu.
S_308367-W
Maintenance Reminders ON/OFF
setting:
Touch the changing menu and select OFF
or ON .
When “Maintenance Reminders” is illu-
minated, the maintenance items can be
set.
Setting the Next Service Date for a
maintenance reminder:
1. Touch “Oil Change” or “Tire Rotation”
on the 2nd menu in the “Maintenance”.
2. ? “Next Service Date”
3. ?
or
S_308368-W
4. ? “Set”
Setting the Interval Distance for the
maintenance reminder:
1. Touch “Oil Change” or “Tire Rotation”
on the 2nd menu in the “Maintenance”.
2. ? “Interval Distance”
3. ? Enter the interval distance.
S_308369-W
4. ? “Set”
NOTE
Touch “Reset” to reset each setting.
Valet mode
s03bx0808
For details, refer to “Valet Mode” �P211.
INSTRUMENTS AND CONTROLS
209
3
(212,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
3-9. CLOCK
s03af
For models with a genuine SUBARU
navigation and/or audio system, the clock
can be adjusted using either auto mode or
manual mode.
SETTING THE CLOCK MANU-
ALLY
s03af03
1. Turn the ignition switch to the “ON”
position.
2. Touch
(Settings).
3. ? “Time/Date”
S_308402-W
4. Models with navigation system:
? Select “Set Automatically” to OFF
.
Models with MySubaru Connected
Services without navigation system:
? Select “Set Automatically” to OFF
.
Models without MySubaru Connected
Services or navigation system:
? Select “Sync with Phone” to OFF
.
S_308403-W
5. ? or
6. ? “Apply”
NOTE
The clock setting screen can also be
displayed by touching the clock on the
status bar.
SETTING THE CLOCK AUTO-
MATICALLY
s03af02
1. Turn the ignition switch to the “ON”
position.
2. Touch
(Settings).
3. ?
“Time/Date”
4. Models with navigation system:
? Select “Set Automatically” to ON
.
Models with MySubaru Connected
Services without navigation system:
? Select “Set Automatically” to ON
.
Models without MySubaru Connected
Services or navigation system:
? Select “Sync with Phone” to ON
.
S_308404-W
Models with navigation system:
The clock will be set automatically where
a GPS signal is available.
Models with MySubaru Connected
Services without navigation system:
The clock will be set automatically where
a DCM (Data Communication Module in
vehicle cellular connection) signal is
INSTRUMENTS AND CONTROLS
210
(213,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
available.
Models without MySubaru Connected
Services or navigation system:
The clock will be set and adjusted
automatically when a smartphone is
connected via Bluetooth
®
.
Register the smartphone to the audio
system. For details, refer to the separate
navigation/audio Owner’s Manual.
NOTE
Depending on the model of smartphone,
the settings of the connected smartphone
may need to be changed. (ex: For iOS or
other models, notification settings may
need to be activated.) For details, check
the instructions on connecting smart-
phones.
SETTING 12-HOUR DISPLAY/
24-HOUR DISPLAY
s03af08
1. Turn the ignition switch to the “ON”
position.
2. Touch
(Settings).
3. ?
“Time/Date”
4. ? Select “24-Hour Clock” to 24-hour
display
or 12-hour display .
3-10. VALET MODE
s03bt
When leaving your vehicle with a valet
service, such as at a hotel or restaurant,
you can set the valet mode, which
disables the navigation, audio, and vehi-
cle setting functions.
ACTIVATION OF VALET MODE
s03bt01
1. Touch “Valet Mode”.
S_308405-W
2. ? “Activate Valet Mode”
3. Enter the passcode.
S_308406-W
4. Touch “Activate”.
When the valet mode is activated, “Valet
Mode Active” is indicated on the infor-
mation bar.
– CONTINUED –
INSTRUMENTS AND CONTROLS
211
3
(214,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
DEACTIVATION OF VALET
MODE
s03bt02
1. Touch the information bar.
S_308407-W
2. Enter the passcode.
3. Touch “Deactivate”.
4. ? “Continue”
CHANGE THE PASSCODE
s03bt03
1. Touch “Valet Mode”.
2. ? “Change Passcode”
3. Enter the current passcode.
4. Touch “Change”.
5. Enter the new passcode.
6. Touch “Set”.
NOTE
If you enter the passcode incorrectly
three times in a row when setting or
canceling valet mode, a message
prompting you to contact a SUBARU
dealer will be displayed, but it is still
possible to enter the passcode even after
the fourth attempt.
If you have forgotten your passcode,
consult your SUBARU dealer.
3-11. LIGHT CONTROL
SWITCH
s03ah
CAUTION
. Use of any lights for a long period
of time while the engine is not
running can cause the battery to
discharge.
. Before leaving the vehicle, make
sure that the light control switch is
turned to the off position. If the
vehicle is left unattended for a long
time with the light control switch set
to a position other than the off
position, even though the lights will
turn off after 10 minutes, the
battery may be discharged.
The light control switch operates when
the push-button ignition switch is in the
“ACC” or “ON” position.
Regardless of the position of the light
control switch, the illuminated lights are
turned off when the push-button ignition
switch is turned off.
NOTE
The light control switch can be operated
(except auto on/off headlights) even
when the push-button ignition switch is
turned to the “OFF” position.
If the driver’s door is opened while the
headlights are illuminated under such
conditions, a chirp sound will inform the
driver that the lights are illuminated.
INSTRUMENTS AND CONTROLS
212
(215,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
HEADLIGHTS
s03ah01
S_307636-W
To turn on the headlights, turn the knob on
the end of the light control switch.
“OFF” position (except for Canada-
spec. models):
The headlights are all off.
Only when the following conditions are
fulfilled, instrument panel illumination,
headlights, parking lights, front side mar-
ker lights, rear side marker lights, tail
lights and license plate lights are auto-
matically on or off depending on the level
of the ambient light.
. The engine is running.
. The parking brake is fully released.
. The select lever is in a position other
than the “P” position.
“OFF” position (Canada-spec. mod-
els):
The headlights are all off.*
1
*
2
*1: When the light switch is switched to the
“OFF” position while the vehicle is stopped,
the lights turn off. Then the light switch will
automatically return to the “AUTO” position.
*2: The headlights will automatically change to
the AUTO mode when the following condi-
tions are met:
. The engine is running.
. The parking brake is fully released.
. The select lever is in a position other than
the “P” position.
“AUTO” position:
When the ignition switch is in the “ON”
position, the instrument panel illumina-
tion, headlights, parking lights, front side
marker lights, rear side marker lights, tail
lights and license plate lights are auto-
matically on or off depending on the
level of the ambient light.
NOTE
. If the light control switch is in the
“AUTO” position and the headlights do
not turn on when it becomes dark
outside, turn the light switch to the “
”
position. If this happens, have your
vehicle inspected by your SUBARU
dealer as soon as possible.
. The light sensitivity of the auto on/off
headlights can be changed by oper-
ating the center information display.
For details, refer to “Vehicle” �P206.
Also, the setting can be changed by a
SUBARU dealer. Consult your
SUBARU dealer for details.
“
” position:
Instrument panel illumination, parking
lights, front side marker lights, rear side
marker lights, tail lights and license plate
lights are on.
“
” position:
Instrument panel illumination, headlights,
parking lights, front side marker lights,
rear side marker lights, tail lights and
license plate lights are on.
Auto-on/off wiper-linked head-
lights
s03ah0106
While the light control switch is in the
“AUTO” position, the headlights will
automatically turn on when the wind-
shield wipers operate several times. The
headlights will automatically turn off ap-
proximately 1 minute after the wiper
stops.
– CONTINUED –
INSTRUMENTS AND CONTROLS
213
3
(216,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
The ON/OFF setting of this function can
be changed by operating the center
information display. Refer to “Vehicle”
�P206.
Also, the setting can be changed by a
SUBARU dealer. Consult your SUBARU
dealer for details.
Welcome lighting function
s03ah0103
The welcome lighting function turns on
the low beam headlight for smooth
approaching to or exiting from the vehicle
at night or in a dark place.
The function is activated while all of the
following conditions are met.
. The light control switch is in the
“AUTO” position.
. It is dark enough to turn on the auto on/
off headlights.
NOTE
If the engine is turned off after turning off
the light switch, the welcome lighting
function may not operate (for Canada
models).
When approaching:
While the welcome lighting function is
activated, the low beam headlights will
automatically illuminate when unlocking
the doors by using the remote keyless
entry system.
The low beam headlights will remain
illuminated for 30 seconds*
1
and then turn
off. However, if any of the following
operations is done, the low beam head-
lights will turn off.
. The doors are locked.
. The light control switch is turned to a
position other than “AUTO”.
When exiting:
While the welcome lighting function is
activated, the low beam headlights will
remain illuminated even when either of
the following operation is done.
. The push-button ignition switch is
turned to the “OFF” position.
The low beam headlights will turn off
under any of the following conditions.
. 3 minutes have passed since the low
beam headlights were illuminated by
the welcome lighting function.
. 30 seconds have passed since the
door is opened and closed.*
1
. The light control switch is turned to a
position other than “AUTO”.
. The locking procedure is performed
twice. When performing the unlocking
procedure after performing the locking
procedure, perform the locking pro-
cedure twice again.
*1: The setting for the period of time in which
the low beam headlights remain on by the
welcome lighting function can be changed
by a SUBARU dealer. Contact your
SUBARU dealer for details. Also, you can
change the setting by operating the center
information display. For details, refer to
“Vehicle” �P206.
Battery drainage reduction
function
s03ah0107
When the headlights are illuminated and
the push-button ignition switch is in the
“OFF” position, the battery drainage
reduction function will be active.
When the battery drainage reduction
function is active, the following system
operations help reduce the risk of battery
discharge.
. The headlights turn off automatically
after 10 minutes.
. When you open or close the door or
operate the light control switch, the
headlights will turn off automatically
10 minutes later.
NOTE
. When you leave the vehicle, put the
light control switch in the “OFF” posi-
tion to prevent battery discharge.
. When you open or close the door or
operate the light control switch after
the headlights turn off automatically,
INSTRUMENTS AND CONTROLS
214
(217,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
the headlights will turn on again.
Sensor for the auto on/off
headlights
s03ah0101
S_308370-W
The location of the sensor is shown in the
illustration.
CAUTION
If any object is placed on or near the
sensor, the sensor may not detect the
level of the ambient light correctly and
the auto on/off headlights may not
operate properly.
HIGH/LOW BEAM CHANGE
(Dimmer)
s03ah02
S_307638-MW
While the light control switch is in the “ ”
or “AUTO” position in a dark place, the
headlights will turn on.
Pushing the lever forward and releasing it
will activate the high beam. Pulling the
lever rearward and releasing it will switch
the headlights to low beam.
When the light control switch is in the
“AUTO” position, pushing the lever for-
ward turns the High Beam Assist is on.
Refer to “High Beam Assist Function”
�P215.
When the headlights are on high beam,
the high beam indicator light “
” on the
instrument cluster also illuminates.
HEADLIGHT FLASHER
s03ah03
S_307639-MW
CAUTION
Do not hold the lever in the flashing
position for more than just a few
seconds.
To flash the headlights, pull the lever
toward you and then release it. The high
beam will stay on for as long as you hold
the lever. The headlight flasher works
even though the lighting switch is in the off
position.
When the headlights are on high beam,
the high beam indicator light “
” on the
instrument cluster also illuminates.
HIGH BEAM ASSIST FUNCTION
s03ah07
The high beam assist function automati-
cally changes the headlight from high
beam to low beam (or vice versa).
– CONTINUED –
INSTRUMENTS AND CONTROLS
215
3
(218,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
When all of the following conditions are
met, the headlight will change to high
beam.
. When the vehicle speed increases to
or above 20 mph (32 km/h).
. There is no preceding or oncoming
vehicle.
. The forward area of the vehicle is
dark.
. The road does not have a sharp curve.
When any of the following conditions are
met, the headlight will change to low
beam.
. When the vehicle speed decreases to
or below 10 mph (16 km/h).
. When the forward area of the vehicle
is bright.
. When there is a preceding or oncom-
ing vehicle.
. When the EyeSight system is mal-
functioning or is temporarily stopped.
NOTE
. Do not overestimate the capacity of
the high beam assist function. The
driver always has the responsibility to
understand the surrounding situation,
to drive safely, and to change the
headlight mode manually if necessary.
. The high beam assist function utilizes
the stereo camera installed at the
position of the front map lights.
. For details on how to handle the
stereo camera, refer to the Owner’s
Manual supplement for the EyeSight
system.
. The factory setting (default setting) for
this function is set as “operational”.
This setting can be changed to OFF
(non-operation) at SUBARU dealers.
For more details, contact a SUBARU
dealer.
How to use the high beam assist
function
s03ah0701
The high beam assist function will be
activated when all the following condi-
tions are met.
. The light control switch is in the
“AUTO” position and the low beam
headlights are on automatically.
. The turn signal lever is pushed for-
ward.
S_308072-W
When the high beam assist function is
activated, the high beam assist indicator
on the instrument cluster will illuminate.
NOTE
If the high beam assist function is
malfunctioning or is temporarily stopped,
the headlight will be fixed at low beam.
How to temporarily lower the
sensitivity of the high beam
assist function
s03ah0704
The sensitivity of the high beam assist
function can be lowered by using the
following operations.
1. After turning the ignition switch to the
“ON” position, set the light control
switch to the “AUTO” position and
push the signal lever forward (high
beam position).
2. After the high beam assist indicator on
the instrument cluster illuminates, turn
the ignition switch to the “OFF” posi-
tion.
INSTRUMENTS AND CONTROLS
216
(219,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
3. Turn the ignition switch to the “ON”
position and within approximately 15
seconds, press the “
/ ” (following
distance setting) switch more than 10
times consecutively.
When the sensitivity of the high beam
assist function is lowered, the high beam
assist indicator “
” on the instrument
cluster display will flash.
NOTE
. The sensitivity of the high beam assist
function cannot be lowered in the
following conditions.
– Cruise control indicator is illumi-
nated.
– The EyeSight warning indicator
(yellow) is illuminated.
. The sensitivity of the high beam assist
function returns to normal level the
next time the ignition switch is turned
to the “OFF” position and the engine is
restarted.
How to change the headlight
mode manually
s03ah0702
Change to the low beam:
. Set the light control switch to “
”.
. Pull the lever while the high beam is
turning on and release it.
Change to the high beam:
Push the lever forward and release it.
At this time, the high beam assist function
will turn off, the high beam assist indicator
will turn off and the high beam indicator
light will turn on.
NOTE
. After manually changing the headlight
mode to the high beam, if you turn on
the high beam assist function, push
the lever forward and release it.
. When manually changing the head-
light mode to the high beam, if you turn
the light control switch to the “
”
position, the parking lights, front side
marker lights, rear side marker lights,
tail lights and license plate lights will
turn on.
Tips for the high beam assist
system
s03ah0703
. The high beam assist function recog-
nizes the condition surrounding the
vehicle based on the brightness of
illumination ahead of your vehicle, etc.
Therefore, the headlight mode may
switch in some situations that do not
match to the driver’s sense.
. A bicycle or cargo cycle may not be
detected.
. Under the following situations, the
brightness of ambient illumination
may not be detected correctly and the
high beam assist function may not
work properly. As a result, the glare of
the high beam may disturb the on-
coming vehicle or vehicle ahead. Also,
the low beam mode may continue
although there are no oncoming ve-
hicles and vehicles ahead. In the such
cases, change the headlight mode
manually.
– In bad weather (fog, snow, sand
storm, heavy rain, etc.).
– When the windshield glass is dirty
or fogged.
– When the windshield is cracked or
damaged.
– If there are lights similar to the
headlights or the tail lights in the
surrounding area.
– When an oncoming vehicle or
vehicle ahead is driven without its
headlights and tail lights on.
– If the headlights of an oncoming
vehicle or the tail lights of a vehicle
ahead are dirty or discolored, or if
the light beams are not aimed
correctly.
– When a rapid change of brightness
continues while driving.
– When driving on a road with many
ups and downs or uneven sur-
faces.
– CONTINUED –
INSTRUMENTS AND CONTROLS
217
3
(220,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
– When driving on a road with many
curves.
– When there are some objects that
reflect light strongly, such as a road
sign or a mirror in vehicle ahead.
– When the rear part of the vehicle
ahead, such as a container, re-
flects light strongly.
– When the headlights of your vehi-
cle are damaged or dirty.
– When your vehicle is tilted, such as
in case the vehicle has a flat tire or
is being towed.
– When the stereo camera is de-
formed or the stereo camera
lenses are dirty.
– Immediately after the engine has
started.
. In the following conditions, the head-
light mode will not be automatically
changed from the high beam to the
low beam.
– When your vehicle passes an
oncoming vehicle suddenly in a
blind curve.
– When another vehicle passes in
front of your vehicle.
– When an oncoming vehicle or
vehicle ahead comes in and out of
view because of continuous
curves, median strips, roadside
trees, etc.
. If the stereo camera detects the light
of the front fog lights of an oncoming
vehicle, the headlight mode may
change from the high beam to the low
beam automatically.
. The headlight mode may change from
the high beam to the low beam, or the
low beam mode may continue, when
affected by a street light, traffic signal,
illumination of an advertisement
board, or a reflective object such as a
road sign and signboard.
. The timing of the change of headlight
mode may differ due to the following
factors.
– Color or brightness of the head-
lights of an oncoming vehicle or the
tail lights of a vehicle ahead.
– The headlights of the oncoming
vehicle or the tail lights of the
vehicle ahead are covered with
mud, snow, etc.
– Movement and direction of an
oncoming vehicle or a vehicle
ahead.
– When the headlights of an oncom-
ing vehicle or the tail lights of a
vehicle ahead illuminate on only
one side.
– When the oncoming vehicle or
vehicle ahead is a motorcycle.
– Conditions of a road (slope, curve,
road surface, etc.).
– Number of passengers and weight
of loaded cargo.
– Limitation of the detection ability of
the stereo camera.
DAYTIME RUNNING LIGHT
SYSTEM
s03ah04
WARNING
When the daytime running lights are
illuminated, the tail lights do not
illuminate. When it becomes dark
outside, turn the light switch to the “
”
position to illuminate the headlights
and tail lights. This will improve visibi-
lity and allow other drivers to see your
vehicle more easily.
The daytime running lights will automati-
cally illuminate when the following condi-
tions are fulfilled.
. The engine is running.
. The parking brake is fully released.
. The light control switch is in “AUTO”,
“
” or “OFF”.
. The select lever is in a position other
than the “P” position.
INSTRUMENTS AND CONTROLS
218
(221,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
NOTE
When the light switch is in the “
”
position, the instrument panel illumina-
tion, front side marker lights, tail lights and
license plate lights are also illuminated.
3-12. STEERING RESPON-
SIVE HEADLIGHT (SRH)
s03bl
S_307918-MW
The target area of illumination when
SRH is activated
The target area of illumination when
SRH is not activated
SRH is a function that automatically
moves the headlight beam to the left or
right in accordance with the steering
angle and vehicle speed. This function
helps to improve the visibility at night by
illuminating the road ahead at corners
and intersections.
You can turn the SRH function on or off.
The settings can be changed by using the
center information display. Refer to “Ve-
hicle” �P206.
S_308077-W
Steering Responsive Headlight OFF
indicator light
The Steering Responsive Headlight OFF
indicator light on the instrument cluster
display turns off when SRH is turned on.
– CONTINUED –
INSTRUMENTS AND CONTROLS
219
3
(222,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
The Steering Responsive Headlight OFF
indicator light on the instrument cluster
display illuminates when SRH is turned
off.
S_308078-W
Steering Responsive Headlight warn-
ing light
If SRH is malfunctioning, the Steering
Responsive Headlight warning light on
the instrument cluster display illuminates
and a message appears on the warning
screen when the ignition switch is in the
“ON” position. It indicates that SRH has
been deactivated. Contact a SUBARU
dealer for an inspection.
NOTE
. The SRH function operative/non-op-
erative status is kept when the engine
is turned off, even if the engine is
restarted.
. When you turn the ignition switch to
the “ON” position, the Steering Re-
sponsive Headlight OFF indicator light
will illuminate and turn off after several
seconds.
. SRH only activates when the vehicle is
traveling forward at the speed of
approximately 5 mph (8 km/h) or
more.
3-13. FRONT FOG LIGHT
SWITCH
s03ba
S_307921-W
Headlight switch
Fog light switch
To turn on the front fog lights:
Turn the fog light switch to the “
”
position while the headlights are in either
of the following conditions.
. The headlight switch is in the “
”
position with the low beam mode
selected.
. The headlight switch is in the “AUTO”
position and the low beam headlights
turn on automatically.
To turn off the front fog lights:
Turn the fog light switch back down to the
“OFF” position.
S_308079-W
The front fog light indicator light located
on the instrument cluster will illuminate
when the front fog lights are on.
INSTRUMENTS AND CONTROLS
220
(223,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
3-14. TURN SIGNAL LEVER
s03ai
S_307922-MW
Right turn
Lane change right signal
Lane change left signal
Left turn
If the lever does not return after cornering,
return the lever to the neutral position by
hand.
To signal a lane change, push the turn
signal lever up or down slightly and hold it
during the lane change. The lever will
return automatically to the neutral posi-
tion when you release it.
ONE-TOUCH LANE CHANGER
s03ai01
To flash the turn signal and turn signal
indicator light three times, push the turn
signal lever up or down slightly and
immediately release it.
NOTE
The operational/non-operational setting
of the one-touch lane changer can be
changed by a SUBARU dealer. Contact
the nearest SUBARU dealer for details.
The setting can also be changed by
operating the center information display.
Refer to “Vehicle” �P206.
3-15. WIPER AND WASHER
s03am
WARNING
In freezing weather, do not use the
windshield washer until the windshield
is sufficiently warmed by the defroster.
Otherwise the washer fluid can freeze
on the windshield, blocking your view.
CAUTION
. Do not operate the washer con-
tinuously for more than 10 sec-
onds, or when the washer fluid tank
is empty. This may cause over-
heating of the washer motor.
Check the washer fluid level fre-
quently, such as at fuel stops.
. Do not operate the wipers when the
windshield is dry. This may scratch
the glass, damage the blade rub-
bers and might cause the wiper
motor to fail. Before operating the
wiper on a dry windshield, always
use the windshield washer.
. In freezing weather, be sure that
the blade rubbers are not frozen to
the windshield or rear window
before switching on the wipers.
Attempting to operate the wiper
with the blade rubbers frozen to the
window glass could cause not only
the blade rubbers to be damaged
but also might cause the wiper
motor to fail. If the blade rubbers
are frozen to the window glass, be
sure to operate the defroster,
windshield wiper deicer or rear
window defogger before turning on
the wiper.
. If the wipers stop during operation
because of ice or some other
obstruction on the window, this
might cause the wiper motor to fail
even if the wiper switch is turned
off. If this occurs, promptly stop the
vehicle in a safe location, turn the
– CONTINUED –
INSTRUMENTS AND CONTROLS
221
3
(224,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
ignition switch to the “OFF” position
and clean the window glass to
allow proper wiper operation.
. Use clean water if windshield
washer fluid is unavailable. In
areas where water freezes in
winter, use SUBARU Windshield
Washer Fluid or the equivalent.
Refer to “Windshield Washer Fluid”
�P495.
Also, when driving the vehicle
when there are freezing tempera-
tures, use non-freezing type wiper
blades.
. Do not clean the wiper blades with
gasoline or a solvent, such as paint
thinner or benzine. This will cause
deterioration of the wiper blades.
. When the wiper switch is in the
“AUTO” position, do not touch the
windshield near the rain sensor
and do not place a wet cloth on the
windshield near the rain sensor.
Doing so may result in unexpected
wiper operation and cause injury.
. When washing the vehicle, make
sure that the wiper is turned off.
Otherwise, the wipers may operate
unexpectedly and cause injury.
. When having your vehicle washed
in an automatic car wash, make
sure that the wiper is turned off.
Otherwise, the wipers may be
damaged because they may oper-
ate unexpectedly and car wash
brushes could become tangled
around them.
NOTE
. The windshield wiper motor is pro-
tected against overloads by a circuit
breaker. If the motor operates con-
tinuously under an unusually heavy
load, the circuit breaker may trip to
stop the motor temporarily. If this
happens, park your vehicle in a safe
location, turn off the wiper switch, and
wait for approximately 10 minutes.
The circuit breaker will reset itself, and
the wipers will again operate normally.
. Clean your blade rubbers and window
glass periodically with a washer solu-
tion to prevent streaking, and to
remove accumulations of road salt or
road film. Operate the windshield
washer for at least 1 second so that
washer solution will be sprinkled all
over the windshield or rear window.
. Grease, wax, insects, or other mate-
rial on the windshield or the wiper
blade results in jerky wiper operation
and streaking on the glass. If you
cannot remove the streaks after op-
erating the windshield washer or if the
wiper operation is jerky, clean the
outer surface of the windshield and
rear window using a sponge or soft
cloth with a neutral detergent or mild-
abrasive cleaner. Do not, however,
use detergent to clean the blade
rubbers. Use only a sponge or soft
cloth (and no neutral detergent or mild
abrasive cleaner) when you clean the
blade rubbers. If you wipe the rubber
of the blade strongly, the black coating
component will peel off, which will
cause the wiper to judder. Also, after
wiping it off, check that the rubber has
not come loose. After cleaning the
window glass and wiper blade rub-
bers, be sure to rinse them with clean
water. Rinse the window until the
water does not form beads on the
glass. This indicates that the glass is
clean.
. If you cannot eliminate the streaking
even after following this procedure,
replace the wiper blades (or blade
rubbers) with new ones. For replace-
ment instructions, refer to “Replace-
ment of Wiper Blades” �P496.
. When the wiper switch is turned to the
“AUTO” position while the ignition
switch is in the “ON” position, the
wipers will operate once. This indi-
cates that the wiper switch is in the
“AUTO” position.
INSTRUMENTS AND CONTROLS
222
(225,1)
北米Model "A2650BE-A" EDITED: 2025/ 7/ 24
. When the wiper switch is in the
“AUTO” position, the following situa-
tions may occur.
– The wipers may operate if the rain
sensor or the windshield is vibrated
or objects such as insects, dirt,
mud, etc. are covering them. Turn
off the wiper unless it is raining or
snowing.
– The wipers do not operate if the
rain sensor does not detect rain or
snow. If necessary, push the wiper
control lever down to the low speed
position or high speed position.
– The wipers may not operate prop-
erly if the rain sensor does not
detect the amount of raindrops
because a water-repellent coating,
dirt, or ice is on the upper half of the
windshield.
– The rain sensor may be malfunc-
tioning if the wiper intermittent
operation does not vary depending
on the amount of rainfall. If neces-
sary, turn the wiper switch to any
position except the “AUTO” posi-
tion. We recommend that you
contact your SUBARU dealer and
have the system inspected as soon
as possible.
– The wipers stop operation if the
ambient temperature decreases to
5°F (−15°C) or lower. The wipers
resume operation when the ambi-
ent temperature increases to 14°F
(−10°C) or higher. If you need to
operate the wipers under 5°F
(−15°C), push the wiper control
lever down to the low speed posi-
tion or high speed position.
– The wipers may not operate if the
temperature around the rain sen-
sor is more than 176°F (80°C)
because the system cannot detect
the amount of raindrops under
these temperatures.
WINDSHIELD WIPER AND
WASHER SWITCHES
s03am01
The wiper operates only when the ignition
switch is in the “ON” position.
Windshield wipers
s03am0101
S_307701-W
: Mist (for a single wipe)
OFF : Off
/AUTO : Intermittent/Automatic operation
: Low speed
:
High speed
To turn the wipers on, push the wiper
control lever down.
To turn the wipers off, return the lever to
the “OFF” position.
For a single wipe of the wipers, push the
lever up. The wipers operate until you
release the lever.
NOTE
. The automatic adjusting mode of the
wiper timing can be changed from the
rain-sensing mode to the vehicle
speed interlocking mode. The setting
can be changed by a SUBARU dealer.
For more details, contact a SUBARU
dealer.
. While the intermittent wiper is in
operation, if the vehicle is started, the
wiper will operate once.
. If the wiper switch is in the “AUTO”
position and the wipers do not operate
when it rains, or the wiper switch is in
– CONTINUED –
INSTRUMENTS AND CONTROLS
223
3
(226,1)
北米Model "A2650BE-A" EDITED: 2025/ 7/ 24
the “Low speed” position and the
wipers do not operate, turn the wiper
switch to the “High speed” position. In
this case, contact your SUBARU
dealer.
Wiper intermittent time control
(models without automatic rain
sensing windshield wipers)
s03am0103
S_307649-W
When the wiper switch is in the “ ”
position, turn the dial to adjust the
operating interval of the wiper. The
operating interval can be adjusted in
several steps from the shortest interval to
the longest.
Automatic operation (models
with automatic rain sensing
windshield wipers)
s03am0107
With the wiper switch in the “AUTO”
position, the wipers operate automatically
when the rain sensor detects falling rain.
The wiper timing is automatically adjusted
depending on the amount of rain.
S_308489-W
The rain sensor is on the windshield
glass.
S_307795-W
Turn the dial to adjust the sensitivity of the
rain sensor for wiper control. Turn the dial
downward to increase the sensitivity.
Turn the dial upward to decrease the
sensitivity.
NOTE
When the wiper control lever is in the
“AUTO” position, if you turn the dial
downward, the wipers will operate once to
inform you that the sensor sensitivity has
been increased.
INSTRUMENTS AND CONTROLS
224
(227,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
Windshield washer
s03am0104
S_307650-W
To wash the windshield, pull the wiper
control lever toward you. The washer fluid
sprays until you release the lever. The
wipers operate while you pull the lever.
NOTE
S_308080-W
The windshield washer fluid warning light
appears when the washer fluid level in the
tank has dropped to the lower limit. If the
warning light appears, refill the tank with
fluid. For the tank refilling method, refer to
“Windshield Washer Fluid” �P495.
REAR WINDOW WIPER AND
WASHER SWITCH
s03am02
The wiper operates only when the ignition
switch is in the “ON” position.
S_307652-W
: Washer (accompanied by wiper operation)
: Continuous
: Intermittent
OFF: Off
: Washer (accompanied by wiper operation)
Rear wiper
s03am0201
To turn the rear wiper on, turn the knob
switch upward.
To turn the wiper off, return the knob
switch to the “OFF” position.
With the switch turned to the “
”
position, the rear wiper will operate
intermittently at intervals corresponding
to the vehicle speed. In this position,
when you move the select lever to the “R”
position, the rear wiper will switch to
continuous operation. When you move
the select lever from the “R” (reverse)
position to another position, the rear
wiper will return to intermittent operation.
Reverse gear interlocked rear wiper:
Even if the rear wiper switch is in the
“OFF” position, if the front windshield
wiper is operating continuously, the rear
wiper will operate intermittently when you
move the select lever to the “R” (reverse)
position.
The factory setting (default setting) of the
reverse gear interlocked rear wiper is as
follows.
. Except for Canada and Mexico: Non-
operation
– CONTINUED –
INSTRUMENTS AND CONTROLS
225
3
(228,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
. For Canada and Mexico: Operation
This setting can be changed by a
SUBARU dealer. Consult your SUBARU
dealer for details.
CAUTION
Do not attach anything that disturbs
the rear wiper operation on the rear
gate. Doing so may damage the rear
wiper when it operates.
Washer
s03am0202
To wash the rear window while the rear
wiper is operating, turn the knob switch
upward to the “
” position. The washer
fluid sprays until you release the knob.
To wash the rear window when the rear
wiper is not in use, turn the knob switch
downward to the “
” position. The
washer fluid sprays and the wiper oper-
ates until you release the knob.
The rear view camera washer also
operates while the rear window washer is
operating.
NOTE
S_308080-W
The windshield washer fluid warning light
appears when the washer fluid level in the
tank has dropped to the lower limit. If the
warning light appears, refill the tank with
fluid. For the tank refilling method, refer to
“Windshield Washer Fluid” �P495.
3-16. DEFOGGER AND DEI-
CER
s03bi
S_308478-W
Rear window defogger and rear wiper
deicer
Outside mirror defogger
Windshield wiper deicer
The defogger and deicer system is
activated only when the ignition switch is
in the “ON” position.
S_308371-W
INSTRUMENTS AND CONTROLS
226
(229,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
To activate the defogger and deicer
system, press the defogger button. The
rear window defogger, outside mirror
defogger and windshield wiper deicer are
activated simultaneously. The indicator
light on the defogger button illuminates
while the defogger and deicer system is
activated.
To turn them off, press the defogger
button again. They also turn off when the
ignition switch is turned to the “ACC” or
“OFF” position.
The defogger and deicer system will
automatically shut off after approximately
15 minutes. If the rear window and
outside mirrors have been cleared and
the windshield wiper blade rubbers have
been deiced completely before that time,
press the defogger button to turn them off.
If defrosting, defogging or deicing is not
complete, you have to press the defogger
button to turn them on again.
It is possible to set the defogger and
deicer system for the continuous opera-
tion mode by operating the center infor-
mation display. For details, refer to
“Vehicle” �P206.
CAUTION
. To prevent the battery from being
discharged, do not operate the
defogger and deicer system con-
tinuously for any longer than ne-
cessary.
. Do not use sharp instruments or
window cleaner containing abra-
sives to clean the inner surface of
the rear window. They may da-
mage the conductors printed on
the window.
NOTE
. Turn on the defogger and deicer
system if the wipers are frozen to the
windshield.
. If the windshield is covered with snow,
remove the snow so that the wind-
shield wiper deicer works effectively.
. While the defogger and deicer system
is in the continuous operation mode:
– If the vehicle speed remains at 9
mph (15 km/h) or lower for 15
minutes, the windshield wiper dei-
cer system automatically stops
operating. However, the rear win-
dow defogger system and outside
mirror defogger system maintain
continuous operation in this condi-
tion.
– If the vehicle battery voltage drops
below the permissible level, con-
tinuous operation of the defogger
system and deicer system is can-
celed and the system stops oper-
ating.
. When the vehicle battery power is low,
the defogger will stop. Start the engine
to use the defogger.
INSTRUMENTS AND CONTROLS
227
3
(230,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
3-17. MIRRORS
s03ap
Always check that the inside and outside
mirrors are properly adjusted before you
start driving.
INSIDE MIRROR (without Auto-
Dimming Function) (If
Equipped)
s03ap08
S_307925-W
Normal position
Anti-glare position
Push the tab on the mirror for normal use.
To reduce glare from the headlights of the
vehicle behind you, pull the tab to the anti-
glare position.
AUTO-DIMMING MIRROR/
COMPASS (If Equipped)
s03ap12
S_307926-W
Compass
Switch
During nighttime driving, the auto-dim-
ming feature senses distracting glare
from vehicle headlights behind you and
automatically dims to eliminate the glare
and preserve your vision.
To Operate the Auto-Dimming
Feature
s03ap1201
Press the “ ” switch to turn the auto-
dimming feature on/off. The auto-dim-
ming feature is enabled when the switch’s
green LED indicator is on. The auto-
dimming feature will default to on with
each ignition cycle.
To Operate the Compass Fea-
ture
s03ap1202
1. To turn the compass feature on/off,
press and hold the “
” switch for
more than 3 seconds or until the
display turns on/off. The compass
feature will default to on with each
ignition cycle.
2. If the display reads “C”, slowly drive
the vehicle in circles until compass is
calibrated.
3. To adjust for compass zone variance:
Compass calibration zones
S_307659-W
(1) Find your current location and
zone number on the map.
(2) Press and hold the “
” switch for
more than 6 seconds or until a
zone number appears in the dis-
play.
(3) Once the zone number appears in
the display, toggle the “
” switch
INSTRUMENTS AND CONTROLS
228
(231,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
again until your current location
zone number appears. After you
stop pressing the switch, your
new zone number will be saved.
Within a few seconds, the display
will show a compass direction.
4. If the vehicle’s magnetics have chan-
ged or if the compass appears in-
accurate, recalibrate the compass.
Press and hold the “
” switch for
more than 9 seconds or until a “C”
appears in the display. Once a “C”
appears in the display, slowly drive the
vehicle in circles until compass is
calibrated.
AUTO-DIMMING MIRROR/
COMPASS WITH HOMELINK
®
(If
Equipped)
s03ap07
S_307927-W
Compass
HomeLink
®
buttons
Switch
During nighttime driving, the auto-dim-
ming feature senses distracting glare
from vehicle headlights behind you and
automatically dims to eliminate the glare
and help preserve your vision.
To Operate the Auto-Dimming
Feature
s03ap0705
Press the “ ” switch to turn the auto-
dimming feature on/off. The auto-dim-
ming feature is enabled when the switch’s
green LED indicator is on. The auto-
dimming feature will default to on with
each ignition cycle.
To Operate the Compass Fea-
ture (if equipped)
s03ap0706
1. To turn the compass feature on/off,
press and hold the “
” switch for
more than 3 seconds or until the
display turns on/off. The compass
feature will default to on with each
ignition cycle.
2. If the display reads “C”, slowly drive
the vehicle in circles until compass is
calibrated.
3. To adjust for compass zone variance:
Compass calibration zones (U.S.)
S_307661-W
Compass calibration zones (South Amer-
ica)
S_307662-W
(1) Find your current location and
zone number on the map.
(2) Press and hold the “
” switch for
more than 6 seconds or until a
zone number appears in the dis-
play.
– CONTINUED –
INSTRUMENTS AND CONTROLS
229
3
(232,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
(3) Once the zone number appears in
the display, toggle the “
” switch
again until your current location
zone number appears. After you
stop pressing the switch, your
new zone number will be saved.
Within a few seconds, the display
will show a compass direction.
4. If the vehicle’s magnetics have chan-
ged or if the compass appears in-
accurate, recalibrate the compass.
Press and hold the “
” switch for
more than 9 seconds or until a “C”
appears in the display. Once a “C”
appears in the display, slowly drive the
vehicle in circles until compass is
calibrated.
HomeLink
®
Wireless Control
System
s03ap0704
The HomeLink
®
Wireless Control System
provides a convenient way to replace up
to three hand-held radio frequency re-
motes used to activate devices such as
gate operators, garage door openers,
entry door locks, security systems, even
home lighting. The below steps are
generic programming instructions; for
Genie and Sommer garage door openers
please go directly to the HomeLink
®
website. Additional information and pro-
gramming videos can be found at www.
and www.
HomeLinkGentex.
CAUTION
. Before programming HomeLink
®
to
a garage door opener or gate
operator, make sure that people
and objects are out of the way of
the device to prevent potential
harm or damage.
. When programming a garage door
opener, it is advised to park outside
of the garage.
. Do not use HomeLink
®
with any
garage door opener that lacks
safety stop and reverse features as
required by U.S. federal safety
standards (this includes any gar-
age door opener model manufac-
tured before April 1, 1982). A
garage door that cannot detect an
object signaling the door to stop
and reverse does not meet current
U.S. federal safety standards.
. It is also recommended that a new
battery be placed in the hand-held
remote (garage door opener re-
mote) of the device for quicker and
more accurate training.
. Turn the ignition switch to the “ON”
or “ACC” position before program-
ming and/or operating HomeLink
®
.
. Keep the hand-held remote (gar-
age door opener remote) of the
device you are programming for
use in other vehicles as well as for
future HomeLink
®
programming.
. For security reasons, when trans-
ferring ownership of your vehicle, it
is recommended to delete the
programmed HomeLink
®
buttons.
Refer to “Erasing HomeLink
®
but-
tons” �P233.
Programming a New
HomeLink
®
button
s03ap0707
1. Press and release the HomeLink
®
button that you would like to program.
The HomeLink
®
indicator light will
flash orange slowly (if not, refer to
“Erasing HomeLink
®
buttons”
�P233).
INSTRUMENTS AND CONTROLS
230
(233,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
S_307928-W
Indicator Light
HomeLink
®
buttons
2. Position the hand-held remote (gar-
age door opener remote) 1 to 3 inches
(2 to 8 cm) away from the HomeLink
®
button that you would like to program.
S_307929-W
Garage door opener remote
NOTE
Some hand-held remotes (garage door
opener remotes) may actually train better
at a distance of 6 to 12 inches (15 to 30
cm). Keep this in mind if you have
difficulty with the programming process.
3. While the HomeLink
®
indicator light is
flashing orange, press and hold the
hand-held remote button. Continue
pressing the hand-held remote button
until the HomeLink
®
indicator light
changes from orange to green. You
may now release the hand-held re-
mote button.
S_307665-W
NOTE
Some devices may require you to replace
this “Programming a New HomeLink
®
button” step 3 with procedures noted in
the “Gate Operator / Canadian Program-
ming” section. Refer to “Gate Operator/
Canadian Programming” �P233.
4. Press the HomeLink
®
button that you
would like to program and observe the
indicator light.
S_307930-W
Indicator Light
. If the indicator light remains con-
stant green, your device should
operate when the HomeLink
®
but-
ton is pressed. At this point, if your
device operates, programming is
complete.
. If the indicator light rapidly flashes
green, firmly press, hold for two
seconds and release the
HomeLink
®
button up to three times
to complete the programming pro-
cess. At this point if your device
operates, programming is com-
– CONTINUED –
INSTRUMENTS AND CONTROLS
231
3
(234,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
plete. If the device does not oper-
ate, continue with the next step of
the programming instructions.
5. At the garage door opener motor,
(security gate motor, etc.) locate the
“Learn”, “Smart”, or “Program” button.
This can usually be found where the
hanging antenna wire is attached to
the motor-head unit (see the device’s
manual to identify this button). The
name and color of the button may vary
by manufacturer.
S_307931-W
“Learn” button
NOTE
A ladder and/or second person may
simplify the following steps.
6. Firmly press and release the “Learn”,
“Smart”, or “Program” button. You now
have 30 seconds in which to complete
step 7.
7. Return to the vehicle and firmly press,
hold for 2 seconds and release the
HomeLink
®
button up to three times. At
this point programming is complete
and your device should operate when
the HomeLink
®
button is pressed and
released.
S_307668-W
8. If status indicator arrows appear next
to the indicator light, please refer to
“Garage Door Two-Way Communica-
tion” �P233.
S_307932-W
Status Indicators
In the event that there are still program-
ming difficulties or questions, additional
HomeLink
®
information and programming
videos can be found at
www. and
www.
For Genie and Sommer garage door
openers please go directly to the
HomeLink
®
website.
INSTRUMENTS AND CONTROLS
232
(235,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
Gate Operator/Canadian Pro-
gramming
s03ap0708
Canadian radio-frequency laws require
transmitter remote signals to “time-out”
(or quit) after several seconds of trans-
mission, which may not be long enough
for HomeLink
®
to pick up the signal during
programming. Similar to this Canadian
law, some U.S. gate operators are de-
signed to “time-out” in the same manner.
The indicator LED on the hand-held
remote will go off when the device times
out, indicating that it has finished trans-
mitting.
If you live in Canada or you are having
difficulties programming a gate operator
or garage door opener by using the
programming procedures, replace “Pro-
gramming a New HomeLink
®
button” step
3 with the following:
While the HomeLink
®
indicator light is
flashing orange, press and release (“cy-
cle”) your device’s hand-held remote
every two seconds until the HomeLink
®
indicator light changes from orange to
green. You may now release the hand-
held remote button.
NOTE
If programming a garage door opener or
gate operator, it is advised to unplug the
device during the “cycling” process to
prevent possible overheating.
Proceed with “Programming a New
HomeLink
®
button” step 4 to complete.
Using HomeLink
®
s03ap0709
To operate, simply press and release the
programmed HomeLink
®
button. Activa-
tion will now occur for the trained device
(i.e. garage door opener, gate operator,
security system, entry door lock, home/
office lighting, etc.). For convenience, the
hand-held remote of the device may also
be used at any time.
Erasing HomeLink
®
buttons
s03ap0710
To erase programming from the three
buttons (individual buttons cannot be
erased but can be “reprogrammed” as
outlined below), follow the step noted:
Press and hold the two outer HomeLink
®
buttons for at least 10 seconds. The LED
indicator will change from continuously lit
to rapidly flashing. Release both buttons.
Do not hold for longer than 20 seconds.
HomeLink
®
is now ready to be pro-
grammed at any time beginning with
“Programming a New HomeLink
®
button”
- step 1.
Reprogramming a Single
HomeLink
®
button
s03ap0711
To program a previously trained button,
follow these steps:
1. Press and hold the desired HomeLink
®
button. DO NOT release the button.
2. The indicator light will begin to slowly
flash orange after 20 seconds. The
HomeLink
®
button can be released at
this point. Proceed with “Programming
a New HomeLink
®
button” - step 3.
3. If you do not complete the program-
ming of a new device to the button, it
will revert to the previously stored
programming.
Garage Door Two-Way Com-
munication
s03ap0712
HomeLink
®
has the capability of commu-
nicating with your garage door opener.
HomeLink
®
can receive and display
“closing” or “opening” status messages
from compatible garage door opener
systems. At any time, HomeLink
®
can
also recall and display the last recorded
status communicated by the garage door
opener to indicate your garage door being
“closed” or “opened”.
HomeLink
®
has the capability of receiving
this communication from the garage door
opener at a range up to 820 feet (250 m).
– CONTINUED –
INSTRUMENTS AND CONTROLS
233
3
(236,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
Range may be reduced by obstacles
such as houses or trees. You may have to
slow your vehicle speed to successfully
receive the garage door opener commu-
nication.
Programming Two-Way Com-
munication
s03ap0713
S_307933-W
Status Indicators
Within 5 seconds after programming a
new HomeLink
®
button, both of Home-
Link’s garage door status indicators will
flash rapidly green indicating that the
garage door two-way communication has
been enabled. If your garage door status
indicators flashed, two-way communica-
tion programming is complete.
If the garage door status indicators do not
flash, additional HomeLink
®
information
and programming videos can be found
online at www. and
www.
Using Two-Way Communica-
tion
s03ap0714
S_307934-W
Status Indicator
Recall and display (at any time) the last
recorded garage door status message
communicated to HomeLink
®
by simulta-
neously pressing HomeLink
®
buttons 1
and 2 for 2 seconds. HomeLink
®
will
display the last recorded status for 3
seconds.
If two-way communication programming
is successful, HomeLink
®
will display the
status of your garage door opener with
arrow indicators (see below).
S_307935-W
Garage Door Opener CLOSING
(Blinking Orange)
Garage Door Opener CLOSED (Solid
Green)
Garage Door Opener OPENING
(Blinking Orange)
Garage Door Opener OPENED (Solid
Green)
INSTRUMENTS AND CONTROLS
234
(237,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
SMART REARVIEW MIRROR/
COMPASS WITH HOMELINK
®
(If
Equipped)
s03ap11
Safety precautions
s03ap1101
WARNING
. Never rely exclusively on the Smart
Rearview Mirror. The Smart Rear-
view Mirror has blind spots that
must be checked prior to operating
the vehicle. Please exercise cau-
tion when using this system.
. Do not disassemble or modify the
main unit, camera or wiring of the
Smart Rearview Mirror. If there is a
strange odor or smoke, stop using
it immediately and we recommend
that you consult a SUBARU dealer.
. Never operate the Smart Rearview
Mirror while driving. Doing so could
result in an accident that causes
serious injury or death.
CAUTION
. Do not put the main unit, camera or
wiring of the Smart Rearview Mirror
close to fire. Doing so could result
in a malfunction and fire.
. When the Smart Rearview Mirror
malfunctions, change to the mirror
mode immediately and we recom-
mend that you consult a SUBARU
dealer.
. Staring at Smart Rearview Mirror
for extended period of time may
result in car sickness.
. The display could become hard to
see because of lights (e.g. sunlight
or the headlights of approaching
vehicles) from outside of the vehi-
cle. In this case, change to the
mirror mode if necessary.
NOTE
When the moonroof is opened (if
equipped):
If the sunlight is too bright to see the
display of the Smart Rearview Mirror,
close the moonroof (sunshade), or select
the mirror mode.
Smart Rearview Mirror
switches
s03ap1102
S_308176-W
Mode lever
Left button
Center button
Right button
HomeLink buttons
How to use the Smart Rearview
Mirror
s03ap1103
CAUTION
Adjust the rearview mirror before
driving.
1) Change the Smart Rearview Mirror
to the mirror mode.
2) Sit with the correct posture in the
driver’s seat and adjust the mirror
position to see behind.
3) Change the Smart Rearview Mirror
to the display mode.
If you start driving without adjusting
the mirror, light may reflect on the
mirror while selecting the display
mode and it may make it hard to see
the screen.
– CONTINUED –
INSTRUMENTS AND CONTROLS
235
3
(238,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
To change the mode:
S_308177-W
To select the display mode, first adjust
the rearview mirror, then pull the mode
lever towards you.
To select the mirror mode, push the
mode lever away from you.
Select the display mode to show the
image from the camera that is installed on
the rear gate.
Select the mirror mode to use as a normal
mirror. If the mirror mode is selected, the
image from the camera is not shown on
the mirror.
NOTE
. It is not possible to use the Smart
Rearview Mirror in the display mode
when the ignition switch is in the “OFF”
or “ACC” position.
. When using the display mode, parts of
the vehicle interior may reflect light on
the display. Adjust the angle of the
Smart Rearview Mirror to avoid un-
wanted reflection.
To adjust the display:
S_308178-W
Left button
Center button
Right button
Press any of the left, center or right
buttons to display the main menu.
NOTE
. The main menu cannot be displayed
on the display while the select lever is
in a position other than the “P” posi-
tion.
. If you do not press the adjustment
buttons that are at the bottom of the
Smart Rearview Mirror for 5 seconds,
the adjustment menu will disappear.
Brightness adjustment:
S_308179-W
Setting button: Press the setting button
to set the brightness.
Press this button to decrease the
brightness.
Press this button to increase the
brightness.
INSTRUMENTS AND CONTROLS
236
(239,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
After pressing the setting button, the
mode will change to the up/down adjust-
ment mode.
Up/down adjustment:
S_308180-W
Setting button: Press the setting button
to set the angle.
Press this button to lower the angle.
Press this button to raise the angle.
After pressing the setting button, the
mode will change to the left/right adjust-
ment mode.
Left/right adjustment:
S_308181-W
Setting button: Press the setting button
to set the angle.
Press this button to turn the angle left.
Press this button to turn the angle right.
After pressing the setting button, the
mode will change to the rotation adjust-
ment mode.
Rotation adjustment:
S_308182-W
Setting button: Press the setting button
to set the angle.
Press this button to turn the angle
counterclockwise.
Press this button to turn the angle
clockwise.
After you press the setting button, the
mode will return to the brightness adjust-
ment mode.
Dimming setting:
The Smart Rearview Mirror has a dim-
ming mirror mode. When the mirror mode
is selected with the ignition switch in the
“ON” position, auto dimming will activate.
This mode decreases glare automatically
depending on the brightness level from
behind.
S_308178-W
Left button
Center button
Right button
When selecting the mirror mode, press
any of the buttons to display the auto
– CONTINUED –
INSTRUMENTS AND CONTROLS
237
3
(240,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
dimming menu. Press the center or right
buttons to turn the dimming mirror mode
ON/OFF.
Dimming mirror mode ON indicator
S_307712-W
Dimming mirror mode OFF indicator
S_307713-W
When turning the dimming mirror mode
ON/OFF, the dimming mirror mode ON/
OFF indicator will illuminate for 5 sec-
onds.
NOTE
. When the ignition switch is turned to
the “OFF” position, auto dimming will
not activate.
. When the display mode is selected,
auto dimming will not activate.
When the display mode mal-
functions
s03ap1106
S_308183-W
When there is a vehicle communication
error, the warning indicators will appear
as shown in the illustration.
When the warning indicators appear,
operate the mode lever to select the
mirror mode. In such a case, we recom-
mend that you consult your SUBARU
dealer for repair.
If the mode does not change to the mirror
mode even when operating the mode
lever, the mode lever may have malfunc-
tioned. In such a case, press and hold one
of the left, center, or right buttons for 10
seconds. Then the mode will change to
the mirror mode.
S_308184-W
When there is a camera calibration error,
the warning indicators will appear as
shown in the illustration.
When the warning indicators appear,
operate the mode lever to select the
mirror mode. In such a case, we recom-
INSTRUMENTS AND CONTROLS
238
(241,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
mend that you consult your SUBARU
dealer for repair.
Maintenance
s03ap1104
S_308372-W
Camera
. Make sure to clean the Smart Rear-
view Mirror and the area around the
camera regularly. If these parts are not
clean, the screen cannot be seen
clearly.
. Wipe off the Smart Rearview Mirror
and the area around the camera by
using a dry soft cloth. If the foreign
matter cannot be removed, first wipe
the area off using a wet soft cloth, and
then wipe using a dry cloth.
. Do not use alcohol, benzine or thinner
for cleaning. Doing so could result in
discoloration, deterioration, or mal-
function.
. Make sure to clean the rear camera
lens regularly. When you clean the
rear camera lens, first soak a soft cloth
with diluted mild detergent to wipe it
off, and wipe using a dry cloth.
. When installing a roof box or a similar
accessory, do not block the area in
front of the camera lens to avoid
interfering with the camera image on
the mirror.
. When the Smart Rearview Mirror’s
visibility is poor because there is dirt or
other foreign material adhering to the
camera, switch to the original rearview
mirror.
Tips
s03ap1105
. Do not use the display mode for a long
time while the engine is not running.
Doing so could result in the battery
discharge.
. Do not install radio antennas around
the Smart Rearview Mirror. Radio
waves may disturb the Smart Rear-
view Mirror screen.
. Observe the following instructions.
Not doing so could result in malfunc-
tion or the main mirror unit falling off.
– Do not push the button too strongly
or move the lever too forcibly.
– Do not turn the main mirror unit
more than 90 degrees.
– Do not impact the main mirror unit.
– Do not impact the camera or
antenna.
. If the screen is hard to see because of
light, select the mirror mode.
. If LED lights or scattered reflections
are caught in the camera, the screen
may flicker. However, this is not a
malfunction.
. If something moves rapidly near the
camera, the display may not be able to
catch the item. However, this is not a
malfunction.
. If the display mode is used, the view of
the rear will be different from the
normal use of the inner mirror or the
mirror mode. Do not rely solely on the
Smart Rearview Mirror; check the rear
visually if necessary. Pay attention to
traffic conditions for safe driving.
. Adjust the brightness of the screen
appropriately. If the screen is too
bright, the driver’s eyes may get tired
while driving.
. The Smart Rearview Mirror some-
times becomes hot. However, this is
not a malfunction.
. In the following cases, the color may
not be clear. However, this is not a
malfunction.
– CONTINUED –
INSTRUMENTS AND CONTROLS
239
3
(242,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
– The shown items are a very far
distance away.
– The environmental conditions are
very dark.
To operate the compass feature
s03ap1107
S_308178-W
Left button
Center button
Right button
Press any of the left, center or right
buttons to display the main menu. Select
compass mode using the left button.
NOTE
The main menu cannot be displayed on
the display while the select lever is in a
position other than the “P” position.
To turn the compass feature on/off:
S_308185-W
Compass
Select “ON” or “OFF” using the center
button.
Compass calibration:
If the compass appears inaccurate, re-
calibrate the compass.
S_308186-W
1. Select “CALIBRATE” using the right
button.
2. To start the compass calibration, press
the center button.
3. Select “Continue” using the center
button.
S_308187-W
4. Select your current location in the
display using the left button.
5. Select “Continue” using the center
button.
6. Once “C” appears in the display,
slowly drive the vehicle in circles until
compass is calibrated.
HomeLink
®
Wireless Control
System
s03ap1108
The HomeLink
®
Wireless Control System
provides a convenient way to replace up
to three hand-held radio-frequency re-
motes used to activate devices such as
INSTRUMENTS AND CONTROLS
240
(243,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
gate operators, garage door openers,
entry door locks, security systems, and
even home lighting. The below steps are
generic programming instructions; for
Genie and Sommer garage door open-
ers, please go directly to the HomeLink
website. Additional information and pro-
gramming videos can be found at
www. and
www.
CAUTION
. Before programming HomeLink to
a garage door opener or gate
operator, make sure that people
and objects are out of the way of
the device to prevent potential
harm or damage.
. When programming a garage door
opener, it is advised to park outside
of the garage.
. Do not use HomeLink with any
garage door opener that lacks
safety stop and reverse features,
as required by U.S. federal safety
standards (this includes any gar-
age door opener model manufac-
tured before April 1, 1982). A
garage door that cannot detect an
object signaling the door to stop
and reverse does not meet current
U.S. federal safety standards.
. It is also recommended that a new
battery be placed in the hand-held
remote (garage door opener re-
mote) of the device for quicker and
more accurate training.
. Some vehicles may require the
ignition switch to be turned to the
“ON” or “ACC” position for pro-
gramming and/or operation of
HomeLink.
. Keep the hand-held remote (gar-
age door opener remote) of the
device you are programming for
use in other vehicles as well as for
future HomeLink programming. It
is also suggested that upon the
sale of the vehicle, the pro-
grammed HomeLink buttons be
erased for security purposes. Re-
fer to “Erasing HomeLink buttons”.
HomeLink set up:
S_308188-W
HomeLink buttons
Left button
Center button
Right button
Press any of the left, center or right
buttons to display the main menu. Select
HomeLink menu using the left button or
press any of the HomeLink buttons.
NOTE
The main menu cannot be displayed on
the display while the select lever is in a
position other than the “P” position.
S_308189-W
1. Select “SET UP” using the right
button.
2. Select “Continue” using the HomeLink
left button.
– CONTINUED –
INSTRUMENTS AND CONTROLS
241
3
(244,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
3. Press any of the HomeLink buttons.
4. Be sure to read the displayed instruc-
tions.
Select “Continue” using the HomeLink
left button.
5. Position the hand-held remote (gar-
age door opener remote) 2 in (5 cm)
away from the mirror.
S_308190-W
Garage door opener remote
6. While the HomeLink programming
instructions are displayed, press and
hold the hand-held remote button.
NOTE
Some hand-held remotes (garage door
opener remotes) may actually train better
at a distance of 6 to 12 in (15 to 30 cm).
Keep this in mind if you have difficulty with
the programming process.
7. Be sure your garage door is not
moving, then press OK.
8. Firmly press the HomeLink left button
3 times.
At this point, your device should
operate when the HomeLink button is
pressed and released.
S_308191-W
9. “Program Success”:
If the programmed HomeLink button
works, select “Yes” and programming
is completed.
If the programmed HomeLink button
does not work, select “No” and pro-
ceed to step 10.
S_308192-W
S_307931-W
“Learn” button
10.At the garage door opener motor,
(security gate motor, etc.) locate the
“Learn”, “Smart”, or “Program” button.
This can usually be found where the
INSTRUMENTS AND CONTROLS
242
(245,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
hanging antenna wire is attached to
the motor-head unit (see the device’s
manual to identify this button). The
name and color of the button may vary
by manufacturer.
NOTE
A ladder and/or second person may
simplify the following steps.
11.Firmly press and release the “Learn”,
“Smart”, or “Program” button. You now
have 30 seconds in which to complete
step 12.
12.Return to the vehicle and press the
HomeLink left button.
13.Firmly press the HomeLink left button
3 times.
At this point, your device should
operate when the HomeLink button is
pressed and released.
14.“Program Success”:
If the programmed HomeLink button
works, select “Yes” and programming
is completed.
In the event that there are still program-
ming difficulties or questions, additional
HomeLink information and programming
videos can be found at
www. and
www.
For Genie and Sommer garage door
openers, please go directly to the
HomeLink website.
Gate Operator/Canadian Program-
ming:
Canadian radio-frequency laws require
transmitter remote signals to “time-out”
(or quit) after several seconds of trans-
mission, which may not be long enough
for HomeLink to pick up the signal during
programming. Similar to this Canadian
law, some U.S. gate operators are de-
signed to “time-out” in the same manner.
The indicator LED on the hand-held
remote will go off when the device times
out, indicating that it has finished trans-
mitting.
If you live in Canada or you are having
difficulties programming a gate operator
or garage door opener by using the
programming procedures, replace “Pro-
gramming a New HomeLink Button” step
3 with the following:
While the HomeLink indicator light is
flashing orange, press and release (“cy-
cle”) your device’s hand-held remote
every two seconds until the HomeLink
indicator light changes from orange to
green. You may now release the hand-
held remote button.
NOTE
If programming a garage door opener or
gate operator, it is advised to unplug the
device during the “cycling” process to
prevent possible overheating.
Proceed with “Programming a New
HomeLink Button” step 4 to complete.
Using HomeLink:
To operate, simply press and release the
programmed HomeLink button. Activa-
tion will now occur for the trained device
(i.e. garage door opener, gate operator,
security system, entry door lock, home/
office lighting, etc.). For convenience, the
hand-held remote of the device may also
be used at any time.
Erasing HomeLink Buttons:
1. Press any of the left, center or right
buttons to select the main menu.
Select HomeLink menu using the left
button.
2. Select “SET UP” using the right
button.
3. Select “Continue” using the HomeLink
left button.
4. Select the “Trash can icon” using the
HomeLink left button.
– CONTINUED –
INSTRUMENTS AND CONTROLS
243
3
(246,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
S_308194-W
5. To erase the program for the
HomeLink button, select “Clear” using
the HomeLink center button.
HomeLink is now ready to be pro-
grammed at any time beginning with
“Programming a new HomeLink button” -
step 1.
Reprogramming a Single HomeLink
Button:
To program a previously programmed
HomeLink button, refer to “HomeLink set
up”.
Garage Door Two-Way Communica-
tion:
HomeLink has the capability of commu-
nicating with your garage door opener.
HomeLink can receive and display “clos-
ing” or “opening” status messages from
compatible garage door opener systems.
At any time, HomeLink can also recall and
display the last recorded status commu-
nicated by the garage door opener to
indicate your garage door being “closed”
or “opened”.
HomeLink has the capability of receiving
this communication from the garage door
opener at a range up to 820 feet (250 m).
Range may be reduced by obstacles
such as houses or trees. You may have to
slow your vehicle speed to successfully
receive the garage door opener commu-
nication.
Programming Two-Way Communica-
tion:
S_308195-W
Status Indicators
Within five seconds after programming a
new HomeLink button, both of Home-
Link’s garage door status indicators will
flash rapidly green indicating that the
garage door two-way communication has
been enabled. If your garage door status
indicators flashed, two-way communica-
tion programming is complete.
If the garage door status indicators do not
flash, additional HomeLink information
and programming videos can be found
online at www.
and
www.
Using Two-Way Communication:
S_308196-W
Press any of the left, center or right
buttons to display the main menu. Select
HomeLink menu using the left button.
Select “STATUS” using the center button.
INSTRUMENTS AND CONTROLS
244
(247,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
NOTE
The main menu cannot be displayed on
the display while the select lever is in a
position other than the “P” position.
S_308195-W
Status Indicators
Recall and display (at any time) the last
recorded garage door status message
communicated to HomeLink. HomeLink
will display the last recorded status for 5
seconds.
S_307935-W
Garage Door Opener CLOSING
(Blinking Orange)
Garage Door Opener CLOSED (Solid
Green)
Garage Door Opener OPENING
(Blinking Orange)
Garage Door Opener OPENED (Solid
Green)
If two-way communication programming
is successful, HomeLink will display the
status of your garage door opener with
arrow indicators.
Language
s03ap1109
S_308198-W
Changes the language displayed in the
Smart Rearview Mirror.
1. Press any of the left, center or right
buttons to display the main menu.
Select “LANGUAGE” using the left
button.
2. Select the language using the right
button and press the center button.
NOTE
The main menu cannot be displayed on
the display while the select lever is in a
position other than the “P” position.
OUTSIDE MIRRORS
s03ap03
Convex mirror (passenger side)
s03ap0301
WARNING
Objects look smaller in a convex
mirror and farther away than when
viewed in a flat mirror. Do not use the
convex mirror to judge the distance of
vehicles behind you when changing
lanes. Use the inside mirror (or glance
backwards) to determine the actual
size and distance of objects that you
view in convex mirror.
– CONTINUED –
INSTRUMENTS AND CONTROLS
245
3
(248,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
CAUTION
Make sure to adjust the mirrors before
driving.
Remote control mirror switch
s03ap0302
S_307944-MW
Select side to adjust
Direction control
The remote control mirrors operate when
the ignition switch is in the “ON” or “ACC”
position.
1. Turn the control switch to the side that
you want to adjust. “L” is for the left
mirror, “R” is for the right mirror.
2. Move the control switch in the direc-
tion you want to move the mirror.
3. Return the control switch to the neutral
position to prevent unintentional op-
eration.
NOTE
The mirrors can also be adjusted manu-
ally.
For models with memory function:
. The outside mirror can be adjusted for
approximately 45 seconds after the
following conditions are met.
– The ignition switch is turned to the
“OFF” position.
– The door is unlocked using the
access key fob.
. The outside mirror angle can be
registered with button “1”, “2” or each
of the key fobs. For details, refer to
“Driver’s Seat Memory Function”
�P41.
. The outside mirror angle can also be
retrieved with the Distraction Mitiga-
tion System user information. To do
so, perform user registration in the
Distraction Mitigation System set-
tings. Refer to “Using the Distraction
Mitigation System” �P398.
Reverse tilt-down feature (if
equipped)
s03ap0306
When backing the vehicle up, the right
and/or left outside mirrors will turn down-
ward automatically to provide better rear
visibility.
1. Push the ignition switch to the ON
position.
2. Move the select lever to the R (Re-
verse) position.
3. The outside mirror angle moves
downward.
The outside mirror angle will return to its
original position when the following con-
dition are met.
. Approximately 9 seconds after the
select lever is moved to any position
other than R (Reverse).
. The ignition switch is turned to the
“OFF” position.
. The vehicle is running.
NOTE
. The reverse tilt-down mirror angle can
be registered with button “1”, “2” or
each of the key fobs. For details, refer
to “Driver’s Seat Memory Function”
�P41.
. The reverse tilt-down mirror angle can
also be retrieved with the Distraction
Mitigation System user information. To
do so, perform user registration in the
Distraction Mitigation System set-
tings. Refer to “Using the Distraction
Mitigation System” �P398.
. The operational/non-operational
setting can be changed by operating
INSTRUMENTS AND CONTROLS
246
(249,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
the center information display. Refer
to “Vehicle” �P206.
. The factory setting (default setting) for
this function is set as the front pas-
senger’s side mirror. The setting of
driver’s side mirror operation can be
changed by a SUBARU dealer. Con-
tact your SUBARU dealer for details.
CAUTION
Depress the brake pedal during the
reverse tilt-down mirror angle adjust-
ment.
To adjust the reverse tilt-down mirror
angle, adjust the outside mirror using the
remote control mirror switch while the
reverse tilt-down operates. For details
about how to adjust the outside mirror
angle, refer to “Remote control mirror
switch” �P246.
Memory function:
The angle of the reverse tilt-down mirror
can be registered. Register the position
with button “1”, “2” or each of the access
key fobs and retrieve the position.
For details about registration or retrieval
of a position, refer to “Driver’s Seat
Memory Function” �P41.
NOTE
If the seat is moved forward or backward
1.18 in (30 mm) or more, the reverse tilt-
down will move to the factory default
position or the last position hold.
Hold last position function:
The angle of the reverse tilt-down mirror
can be set to the latest adjusted angle.
The hold last position function operates
when the following condition are met.
. The memory function is not used.
. The seat is moved forward or back-
ward 1.18 in (30 mm) or more.
NOTE
. The factory setting (default setting) for
this function is set as “non-opera-
tional”. This setting can be changed to
“operational” at SUBARU dealers. For
more details, contact a SUBARU
dealer.
. If the hold last position function setting
is “non-operation”, the reverse tilt-
down will move to the factory default
position.
Power folding mirror switch (if
equipped)
s03ap0304
S_308421-W
The power folding mirror switch operates
when the ignition switch is in the “ON” or
“ACC” position.
To fold the outside mirrors, press the
power folding mirror switch. To unfold the
mirrors, press the switch again.
NOTE
. If the outside mirrors have been
operated (folded or unfolded) manu-
ally, when you turn the ignition switch
from the “OFF” position to the “ACC”
or “ON” position, the outside mirrors
may be adjusted automatically de-
pending on the status of the power
folding mirror switch.
. If the outside mirrors have been
manually folded slightly forward of the
regularly unfolded position, when you
turn the ignition switch from the “OFF”
position to the “ACC” or “ON” position,
the outside mirrors may automatically
– CONTINUED –
INSTRUMENTS AND CONTROLS
247
3
(250,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
fold further forward depending on the
status of the power folding mirror
switch. When this happens, press the
power folding mirror switch. By doing
so, the outside mirrors which have
been folded to the furthest forward
position will extend to the regularly
unfolded position and then fold rear-
ward in the usual way. In order to
unfold the outside mirrors, press the
switch again.
. When you fold the outside mirrors
manually, the mirrors may not unfold
when the switch is pressed, even
though the motor operating sound is
heard. When this happens, operate
the power folding mirror switch again.
. When you unfold the outside mirrors
manually, the mirrors may become
wobbly. Be sure to unfold the mirrors
by operating the switch. If the outside
mirrors are still wobbly, fold the mirrors
again and then unfold them by oper-
ating the switch again.
. When the temperature is low, the
outside mirrors may stop during op-
eration. Push the switch again. When
the outside mirrors do not work by
operating the switch, move the outside
mirrors several times manually. This
makes it possible to operate them by
switch operation.
. When you operate the power folding
mirror switch continuously, it may not
work. This is not a malfunction. Oper-
ate after waiting for a short period of
time.
. The outside mirrors can be operated
(folded or unfolded) manually for
approximately 45 seconds after the
following conditions are met.
– The ignition switch is turned to the
“OFF” position.
– The door is unlocked using the
access key fob.
Power folding door mirror with the
automatic function (if equipped):
The mirrors automatically fold when the
power folding mirror switch is in the mirror
unfolding position, the ignition switch is
turned OFF, and the doors are locked.
The mirrors automatically unfold when
the power folding mirror switch is in the
mirror unfolding position and the doors
are unlocked.
NOTE
. The power folding door mirror with the
automatic function does not operate
automatically when the power folding
mirror switch is in the mirror folding
position.
. The automatic setting of the power
folding door mirrors can be changed
by operating the center information
display. For details, refer to “Vehicle”
�P206. Also, the setting can be
changed by your SUBARU dealer.
Contact your SUBARU dealer for de-
tails.
INSTRUMENTS AND CONTROLS
248
(251,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
3-18. TILT/TELESCOPIC
STEERING WHEEL
s03bf
WARNING
. Do not adjust the steering wheel
tilt/telescopic position while driv-
ing. This may cause loss of vehicle
control and result in personal
injury.
. If the lever cannot be raised to the
fixed position, adjust the steering
wheel again. It is dangerous to
drive without locking the steering
wheel. This may cause loss of
vehicle control and result in perso-
nal injury.
S_308373-W
Tilt adjustment
Telescopic adjustment
1. Adjust the seat position. Refer to
“Front Seats” �P37.
2. Pull the tilt/telescopic lock lever down.
3. Move the steering wheel to the desired
level.
4. Pull the lever up to lock the steering
wheel in place.
5. Make sure that the steering wheel is
securely locked by moving it up and
down, and forward and backward.
3-19. HEATED STEERING
WHEEL SYSTEM (If
Equipped)
s03bm
The Heated Steering Wheel system
warms the steering wheel at a constant
temperature.
S_307946-W
Heated Steering Wheel switch
Indicator light
Heated area
To turn on the Heated Steering Wheel
system, pull the Heated Steering Wheel
switch when the ignition switch is in the
“ON” or “ACC” position. Then the steering
wheel will be warmed and the indicator
light on the switch will illuminate. To turn
off the Heated Steering Wheel system,
pull the switch again. Then the indicator
light will turn off.
CAUTION
. Use the Heated Steering Wheel
system with the engine running.
Otherwise, the battery voltage may
drop below the permissible level
and it may not be possible to start
the engine.
. There is a possibility that people
with delicate skin may suffer slight
burns even at low temperatures if
they use the Heated Steering
Wheel for a long period of time.
When using the Heated Steering
Wheel, always be sure to warn the
persons concerned.
– CONTINUED –
INSTRUMENTS AND CONTROLS
249
3
(252,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
. Do not cover the Heated Steering
Wheel with an object such as a
steering wheel cover. Doing so
may cause the Heated Steering
Wheel to overheat.
. Do not spill liquid on the steering
wheel. If liquid is spilled, wipe it off
immediately and dry it before using
the Heated Steering Wheel sys-
tem.
NOTE
. If the surface temperature of the
steering wheel is approximately above
104°F (40°C) when the switch is
turned on, the system will not heat the
steering wheel. Then, the indicator
light will continue to illuminate.
. The Heated Steering Wheel system
will automatically turn off approxi-
mately 30 minutes after the system
has been turned on.
. The temperature of the Heated
Steering Wheel system cannot be
adjusted.
3-20. HORN
s03ar
S_307679-W
To sound the horn, push the horn pad.
INSTRUMENTS AND CONTROLS
250
(253,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
— — — — — — — — — — — — — — — — — — — — — — — — —
— — — — — — — — — — — — — — — — — — — — — — — — —
— — — — — — — — — — — — — — — — — — — — — — — — —
— — — — — — — — — — — — — — — — — — — — — — — — —
— — — — — — — — — — — — — — — — — — — — — — — — —
— — — — — — — — — — — — — — — — — — — — — — — — —
— — — — — — — — — — — — — — — — — — — — — — — — —
— — — — — — — — — — — — — — — — — — — — — — — — —
— — — — — — — — — — — — — — — — — — — — — — — — —
— — — — — — — — — — — — — — — — — — — — — — — — —
— — — — — — — — — — — — — — — — — — — — — — — — —
— — — — — — — — — — — — — — — — — — — — — — — — —
— — — — — — — — — — — — — — — — — — — — — — — — —
— — — — — — — — — — — — — — — — — — — — — — — — —
— — — — — — — — — — — — — — — — — — — — — — — — —
— — — — — — — — — — — — — — — — — — — — — — — — —
— — — — — — — — — — — — — — — — — — — — — — — — —
— — — — — — — — — — — — — — — — — — — — — — — — —
— — — — — — — — — — — — — — — — — — — — — — — — —
(254,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
— — — — — — — — — — — — — — — — — — — — — — — — —
— — — — — — — — — — — — — — — — — — — — — — — — —
— — — — — — — — — — — — — — — — — — — — — — — — —
— — — — — — — — — — — — — — — — — — — — — — — — —
— — — — — — — — — — — — — — — — — — — — — — — — —
— — — — — — — — — — — — — — — — — — — — — — — — —
— — — — — — — — — — — — — — — — — — — — — — — — —
— — — — — — — — — — — — — — — — — — — — — — — — —
— — — — — — — — — — — — — — — — — — — — — — — — —
— — — — — — — — — — — — — — — — — — — — — — — — —
— — — — — — — — — — — — — — — — — — — — — — — — —
— — — — — — — — — — — — — — — — — — — — — — — — —
— — — — — — — — — — — — — — — — — — — — — — — — —
— — — — — — — — — — — — — — — — — — — — — — — — —
— — — — — — — — — — — — — — — — — — — — — — — — —
— — — — — — — — — — — — — — — — — — — — — — — — —
— — — — — — — — — — — — — — — — — — — — — — — — —
— — — — — — — — — — — — — — — — — — — — — — — — —
— — — — — — — — — — — — — — — — — — — — — — — — —

Related Topics

Push-Button Ignition Switch Safety Precautions (Push-Button Ignition Switch) Operating Range for Push-Button Start System Switching Power Status When Access Key Fob Does Not Operate Properly Hazard Warning Flasher Meters and Gauges Speedometer Tachometer Odometer Double Trip Meter Fuel Gauge and Driving Range on Remaining Fuel Engine Coolant Temperature Gauge Instrument Cluster Settings Illumination Brightness Control Auto Dimmer Cancel Function Warning and Indicator Lights Instrument Cluster Display Basic Operation (Instrument Cluster Display) Instrument Cluster Display Mode Welcome Screen (Opening Animation) and Good-Bye Screen (Ending Animation) Warning Screen Meter Information Screen Telltale Screen Basic Screens Digital Speed Screen Center Information Display (CID) Features Welcome Screen and Good-Bye Screen (CID) Touch Screen Operations Center Information Display HOME Icon Outside Temperature and Clock Information Bar Status Bar Driver Profile Icon How to Change the Screen Settings Shortcut Icons Setting Clock Setting the Clock Manually Setting the Clock Automatically Setting 12-Hour Display/24-Hour Display Valet Mode Activation of Valet Mode Deactivation of Valet Mode Change the Passcode Light Control Switch Headlights High/Low Beam Change (Dimmer) Headlight Flasher High Beam Assist Function Daytime Running Light System

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot