Get Instruments and Controls -> Instrument Cluster Display Guide for Subaru Outback SUV Seventh Generation (2026)

(187,1)

北米Model "A2650BE-A" EDITED: 2025/ 6/ 27

3-6. INSTRUMENT CLUSTER

DISPLAY

s03bn

WARNING

Always pay adequate attention to safe

driving when operating the instrument

cluster display while the vehicle is in

motion. When operation of the instru-

ment cluster display interferes with

your ability to concentrate on driving,

stop the vehicle before performing

operations on the screen. Also, do not

concentrate on the display while driv-

ing. Doing so may cause you to look

away from the road and could result in

an accident.

Various information will be shown on the

instrument cluster display. Also, a warn-

ing message will appear on the display if a

malfunction is detected. In addition, sev-

eral settings for the displayed content can

be performed.

– CONTINUED –

INSTRUMENTS AND CONTROLS

185

(188,1)

北米Model "A2650BE-A" EDITED: 2025/ 6/ 27

S_308347-W

Meter information screen (Refer to

“Meter Information Screen” �P189.)

Warning and indicator (Refer to

“Warning and Indicator Lights”

�P162.)

Warning screen (Refer to “Warning

Screen” �P189.)

EyeSight screen*

Digital speed screen (Refer to “Digital

Speed Screen” �P193.)

Double trip meter (Refer to “Double Trip

Meter” �P159.)

Odometer screen (Refer to “Odometer”

�P158.)

X-MODE indicator (Refer to “X-MODE”

�P335.)

Select lever/gear position indicator

(Refer to “Select Lever/Gear Position

Indicator” �P180.)

Basic screen (Refer to “Basic Screens”

�P191.)

Warning screen (Refer to “Warning

Screen” �P189.)

Telltale screen (Refer to “Telltale

Screen” �P190.)

*: For details, refer to the separate EyeSight

Owner’s Manual.

INSTRUMENTS AND CONTROLS

186

(189,1)

北米Model "A2650BE-A" EDITED: 2025/ 6/ 27

BASIC OPERATION

s03bn01

S_308348-W

By operating or of the control

switches, the screens can be changed.

If there are some useful messages, such

as vehicle information, warning informa-

tion, etc., they will interrupt the current

screen, and appear on the display

accompanied by a beep. If such a screen

is displayed, take proper action according

to the message shown on the screen.

S_308126-W

The warning screen will return to the

original screen after a few seconds. While

the

information reminder is shown on

the display, it may be possible to display

the warning screen again. To recall the

message marked with

on the display,

press and hold the

switch on the

steering wheel.

– CONTINUED –

INSTRUMENTS AND CONTROLS

187

(190,1)

北米Model "A2650BE-A" EDITED: 2025/ 6/ 27

INSTRUMENT CLUSTER DISPLAY MODE

s03bn16

S_308349-W

Classic mode

In classic mode, the analogue tach-

ometer and speedometer display re-

spectively.

Map mode*

In map mode, the tachometer and

speedometer are displayed together

with the genuine SUBARU navigation

system.

EyeSight mode*

The EyeSight mode screen displays

the vehicle operating status and sur-

roundings.

Calm mode

In calm mode, only the minimum

necessary information is displayed.

*1: For details about the audio and navigation

system, refer to the Owner’s Manual

supplement for the audio and navigation

system.

*2: For details about the EyeSight system, refer

to the Owner’s Manual supplement for the

EyeSight system.

There are four different screen modes to

choose from. To change the screen

mode, press the “

” switch or operate

the Center Information Display settings.

Refer to “Displays” �P204.

NOTE

. When a warning screen or a turn-by-

turn display is displayed, the screen

mode cannot be switched.

. Depending on the mode, the display

location of such things as the instru-

ments, basic screen, and EyeSight

screen will change.

INSTRUMENTS AND CONTROLS

188

(191,1)

北米Model "A2650BE-A" EDITED: 2025/ 6/ 27

WELCOME SCREEN (Opening

Animation) AND GOOD-BYE

SCREEN (Ending Animation)

s03bn08

Welcome screen and Good-bye screen

are motion graphics displayed on the

instrument cluster display and center

information display upon entering and

exiting the vehicle.

When the driver’s door is opened and

closed after unlocking the door, the

welcome screen (opening animation) will

appear on the instrument cluster display

for approximately 20 seconds.

When the ignition switch is turned to the

“OFF” position, the instrument cluster

display gradually turns off by showing

good-bye screen (ending animation).

NOTE

. The welcome screen and the good-

bye screen may differ in the actual

words and appearance.

. The basic screen will be shown when

the ignition switch is turned to the “ON”

position while the welcome screen is

displayed.

. Once the welcome screen appears, it

takes a certain period of time to

display it again.

. If the ignition switch is operated after

unlocking the driver’s door, the wel-

come screen will not appear even

when the driver’s door is opened and

closed.

. The welcome screen will disappear

when you lock the driver’s door by

using the remote keyless entry system

or the keyless access function while

the welcome screen is displayed.

. The welcome screen including the

audio/navigation unit can be set to on

or off.

WARNING SCREEN

s03bn05

Example of warning

S_307548-W

If there is a warning message or a

maintenance notification, it will appear on

the instrument cluster display. Take the

appropriate actions based on the mes-

sages indicated.

METER INFORMATION

SCREEN

s03bn12

This screen informs the driver of various

information.

The meter information screen can be

changed. For details, refer to “Displays”

�P204.

Clock and temperature

s03bn1202

S_308256-W

This screen displays the clock and out-

side temperature.

– CONTINUED –

INSTRUMENTS AND CONTROLS

189

(192,1)

北米Model "A2650BE-A" EDITED: 2025/ 6/ 27

NOTE

. The clock can be displayed in either

12-hour display or 24-hour display.

For details, refer to “Setting 12-Hour

Display/24-Hour Display” �P211.

. The outside temperature indicator

shows the temperature in the area

around the sensor. However, the

temperature may not be indicated

correctly or the update may be de-

layed in the following conditions.

– While parking or driving at low

speeds

– When the outside temperature

changes suddenly (example: when

going in and out of an underground

parking area or when passing

through a tunnel)

– When starting the engine after

being parked for a certain period of

time

. You can set the temperature units to

be displayed in Fahrenheit (°F) or

Celsius (°C). For details, refer to

“Displays” �P204.

Compass (if equipped)

s03bn1203

S_308257-W

The direction of the vehicle is displayed.

TELLTALE SCREEN

s03bn09

S_308350-W

Telltale screen

When the corresponding situation occurs,

the following telltales will be displayed on

the telltale screen.

NOTE

. When there is warning information to

display, it will be displayed in five

warning indicators, starting on the left

in ascending order of severity.

. If there are 6 or more warning mes-

sages to display, the indicators will be

displayed in sequential order.

Mark Name Page

Door open indicator light 174

Engine hood open warning

light

174

LED headlight warning

light

181

Steering Responsive

Headlight OFF indicator

light

181

Steering Responsive

Headlight warning light

181

Engine low oil level warn-

ing light

168

AT OIL TEMP warning light 169

All-Wheel Drive warning

light

174

INSTRUMENTS AND CONTROLS

190

(193,1)

北米Model "A2650BE-A" EDITED: 2025/ 6/ 27

Mark Name Page

RAB warning indicator 183

Proximity Warning Detec-

tion OFF indicator

184

BSW/RCTW warning indi-

cator

183

BSW/RCTW OFF indica-

tor

183

Hill descent control indica-

tor light

183

Auto Start Stop warning

light (yellow)

181

Auto Start Stop indicator

light (green)

182

Auto Start Stop OFF indi-

cator light

181

Auto Start Stop No Activity

Detected indicator light

182

Windshield washer fluid

warning light

174

Distraction Mitigation Sys-

tem operation indicator

light (green)

184

Distraction Mitigation Sys-

tem warning light (yellow)

184

Distraction Mitigation Sys-

tem OFF indicator light

184

Distraction Mitigation Sys-

tem temporary stop indi-

cator light

184

Icy road surface warning

light

183

Electric damper system

warning light (if equipped)

182

Front Cross Traffic Braking

warning indicator (if

equipped)

184

Front Cross Traffic Braking

OFF indicator (if equipped)

184

BASIC SCREENS

s03bn06

By operating the or switch on the

steering wheel, you can change the

screen that is always displayed.

ECO gauge:

S_308382-W

The ECO gauge shows the difference

between the average rate of fuel con-

sumption since the trip meter was last

reset and the current rate of fuel con-

sumption.

The ECO gauge indicates the current fuel

efficiency as shown in the following chart.

Displayed unit

Needle position

“+” side “−” side

MPG Better Poorer

l/100km Poorer

Better

NOTE

. The ECO gauge shows only an

approximate indication.

. After resetting the trip meter, the

average rate of fuel consumption is

not shown until driving for approxi-

mately 10 seconds. Until that time, the

ECO gauge does not operate.

– CONTINUED –

INSTRUMENTS AND CONTROLS

191

(194,1)

北米Model "A2650BE-A" EDITED: 2025/ 6/ 27

Average fuel consumption screen:

S_308383-W

AVG: Average fuel consumption

This screen displays the average rate of

fuel consumption since the trip meter was

last reset.

NOTE

The driving range on the remaining fuel is

only a guide. The indicated value may

differ from the actual driving range on the

remaining fuel, so you must immediately

fill the tank when the low fuel warning light

illuminates.

Current fuel consumption screen:

S_308384-W

: Current fuel consumption

NOTE

The driving range on the remaining fuel is

only a guide. The indicated value may

differ from the actual driving range on the

remaining fuel, so you must immediately

fill the tank when the low fuel warning light

illuminates.

Driving information screen:

S_308085-W

: Journey time

: Journey distance

This screen displays the journey time (the

time that has elapsed since the ignition

switch was turned to the “ON” position)

and journey distance (the distance that

has been driven since the ignition switch

was turned to the “ON” position).

TPMS screen (except for Canada-

spec. models):

S_308086-W

This screen displays each tire pressure.

When a tire is deflated, the deflated tire

and the tire pressure will be displayed on

the screen in yellow.

NOTE

. The tire pressure values are displayed

several minutes after driving.

. You can set the tire pressure units. For

details about setting the units, refer to

“Displays” �P204.

INSTRUMENTS AND CONTROLS

192

(195,1)

北米Model "A2650BE-A" EDITED: 2025/ 6/ 27

. Once the tire pressure monitoring

system detects the low tire pressure,

the tire pressure values will display in

yellow until the system detects the

normal tire pressure.

. Immediately adjust the tire pressure

when the warning light illuminates.

When the tire pressure monitoring

system detects the adjusted tire pres-

sure, the warning light will turn off and

the tire pressure values will turn to

white.

. For information about the specified

value of the air pressure, refer to

“Tires” �P517.

Navigation screen (if equipped):

S_308087-W

When the route guidance is set in the

navigation system, this item shows the

navigation route information. For details

about the navigation system, refer to the

separate navigation/audio Owner’s Man-

ual.

Audio screen:

S_308088-W

The audio screen shows the status of

audio information. For details about the

audio system, refer to the separate nav-

igation/audio Owner’s Manual.

DIGITAL SPEED SCREEN

s03bn11

S_308351-W

Speed limit indicator

Vehicle speed

This screen displays the current vehicle

speed.

INSTRUMENTS AND CONTROLS

193

Instruments and Controls -> Instrument Cluster Display for Your Subaru Outback SUV Seventh Generation (2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals