北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
NOTE
. You will see the “
” sign in the fuel
gauge. This indicates that the fuel filler
lid is located on the right side of the
vehicle.
. If you press the TRIP RESET switch
while the ignition switch is in the “OFF”
or “ACC” position, the fuel gauge will
light up and indicate the amount of fuel
remaining in the tank.
The gauge will turn off when the TRIP
RESET switch is not operated for
approximately 10 seconds.
. The driving range on the remaining
fuel is only a guide. The indicated
value may differ from the actual driving
range on the remaining fuel, so you
must immediately fill the tank when the
low fuel warning light illuminates.
. If you refuel the vehicle with approxi-
mately 2.6 US gal (10 liters, 2.2 Imp
gal) or less of fuel, the values indi-
cated on the fuel gauge and driving
range on the remaining fuel may not
update. As a guideline, refueling the
vehicle with approximately 2.6 US gal
(10 liters, 2.2 Imp gal) or more of fuel
will update the indicated values.
ENGINE COOLANT TEMPERA-
TURE GAUGE
s03ad08
S_308341-W
Normal operating range
The temperature gauge shows engine
coolant temperature when the ignition
switch is in the “ON” position.
The coolant temperature will vary in
accordance with the outside temperature
and driving conditions.
We recommend that you drive moder-
ately until the pointer of the temperature
gauge reaches near the middle of the
range. Engine operation is optimum with
the engine coolant at this temperature
range and high revving operation when
the engine is not warmed up enough
should be avoided.
CAUTION
If the pointer exceeds the normal
operating range, safely stop the vehi-
cle as soon as possible.
Refer to “Engine Overheating”
�P446.
INSTRUMENT CLUSTER SET-
TINGS
s03ad16
Instrument cluster settings can be set on
the center information display. For details,
refer to “Displays” �P204.
INSTRUMENTS AND CONTROLS
160
English 
