北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
DEACTIVATION OF VALET
MODE
s03bt02
1. Touch the information bar.
S_308407-W
2. Enter the passcode.
3. Touch “Deactivate”.
4. ? “Continue”
CHANGE THE PASSCODE
s03bt03
1. Touch “Valet Mode”.
2. ? “Change Passcode”
3. Enter the current passcode.
4. Touch “Change”.
5. Enter the new passcode.
6. Touch “Set”.
NOTE
If you enter the passcode incorrectly
three times in a row when setting or
canceling valet mode, a message
prompting you to contact a SUBARU
dealer will be displayed, but it is still
possible to enter the passcode even after
the fourth attempt.
If you have forgotten your passcode,
consult your SUBARU dealer.
3-11. LIGHT CONTROL
SWITCH
s03ah
CAUTION
. Use of any lights for a long period
of time while the engine is not
running can cause the battery to
discharge.
. Before leaving the vehicle, make
sure that the light control switch is
turned to the off position. If the
vehicle is left unattended for a long
time with the light control switch set
to a position other than the off
position, even though the lights will
turn off after 10 minutes, the
battery may be discharged.
The light control switch operates when
the push-button ignition switch is in the
“ACC” or “ON” position.
Regardless of the position of the light
control switch, the illuminated lights are
turned off when the push-button ignition
switch is turned off.
NOTE
The light control switch can be operated
(except auto on/off headlights) even
when the push-button ignition switch is
turned to the “OFF” position.
If the driver’s door is opened while the
headlights are illuminated under such
conditions, a chirp sound will inform the
driver that the lights are illuminated.
INSTRUMENTS AND CONTROLS
212
English 
