北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
the headlights will turn on again.
Sensor for the auto on/off
headlights
s03ah0101
S_308370-W
The location of the sensor is shown in the
illustration.
CAUTION
If any object is placed on or near the
sensor, the sensor may not detect the
level of the ambient light correctly and
the auto on/off headlights may not
operate properly.
HIGH/LOW BEAM CHANGE
(Dimmer)
s03ah02
S_307638-MW
While the light control switch is in the “ ”
or “AUTO” position in a dark place, the
headlights will turn on.
Pushing the lever forward and releasing it
will activate the high beam. Pulling the
lever rearward and releasing it will switch
the headlights to low beam.
When the light control switch is in the
“AUTO” position, pushing the lever for-
ward turns the High Beam Assist is on.
Refer to “High Beam Assist Function”
�P215.
When the headlights are on high beam,
the high beam indicator light “
” on the
instrument cluster also illuminates.
HEADLIGHT FLASHER
s03ah03
S_307639-MW
CAUTION
Do not hold the lever in the flashing
position for more than just a few
seconds.
To flash the headlights, pull the lever
toward you and then release it. The high
beam will stay on for as long as you hold
the lever. The headlight flasher works
even though the lighting switch is in the off
position.
When the headlights are on high beam,
the high beam indicator light “
” on the
instrument cluster also illuminates.
HIGH BEAM ASSIST FUNCTION
s03ah07
The high beam assist function automati-
cally changes the headlight from high
beam to low beam (or vice versa).
– CONTINUED –
INSTRUMENTS AND CONTROLS
215
3
English 
