北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
The odometer shows the total distance
that the vehicle has been driven.
NOTE
If you press the TRIP RESETswitch when
the ignition switch is in the “OFF” or “ACC”
position, the odometer/trip meter will light
up. The indicators will turn off when the
TRIP RESET switch is not operated for
approximately 10 seconds.
DOUBLE TRIP METER
s03ad05
S_308339-W
TRIP RESET switch
Trip meter
This meter displays the two trip meters
when the ignition switch is in the “ON”
position.
The trip meter shows the distance that the
vehicle has been driven since you last set
it to zero.
The display can be switched as shown in
the following sequence by pressing the
TRIP RESET switch.
ZOM0972
To reset the trip meter, select either the A
trip or B trip meter, then press and hold
the TRIP RESET switch.
CAUTION
To ensure safety, do not attempt to
change the function of the indicator
during driving, as an accident could
result.
NOTE
. If the connection between the instru-
ment cluster and battery is broken for
any reason such as vehicle mainte-
nance or fuse replacement, the data
recorded on the trip meter will be lost.
. If you press the TRIP RESET switch
when the ignition switch is in the “OFF”
or “ACC” position, the odometer/trip
meter will light up. It is possible to
switch between the A trip meter and B
trip meter indications while the od-
ometer/trip meter is lit up.
In addition, it is possible to reset the
trip meter by pressing and holding the
TRIP RESET switch.
The indicators will turn off when the
TRIP RESET switch is not operated
for approximately 10 seconds.
FUEL GAUGE AND DRIVING
RANGE ON REMAINING FUEL
s03ad07
S_308340-W
The fuel gauge shows the approximate
amount of fuel remaining in the tank.
The gauge may move slightly due to fuel
level movement in the tank (e.g., during
braking, turning or acceleration).
– CONTINUED –
INSTRUMENTS AND CONTROLS
159
3
English 
