北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
3-7. CENTER INFORMATION
DISPLAY (CID) FEATURES
s03bs
WARNING
Always pay attention to safe driving
when operating the center information
display while the vehicle is in motion.
When operation of the center infor-
mation display is disturbing your
awareness and ability to concentrate
on driving, stop the vehicle in a safe
place before performing operations on
the display. Also, do not concentrate
on the display while driving. Doing so
could result in an accident.
All information is displayed on the center
information display, including vehicle
settings, vehicle status, navigation sys-
tem (if equipped) operation and audio
operation.
Items Page
Maintenance informa-
tion
209
Rear view camera 362
Surround View Moni-
tor*
353
Navigation system*
Refer to the separate nav-
igation/audio Owner’s
Manual.
Audio/telephone
Refer to the separate nav-
igation/audio Owner’s
Manual.
EyeSight
Refer to the Owner’s Man-
ual supplement for the
EyeSight system.
*: If equipped
The center information display can also
be used to set and initialize the center
information display itself.
NOTE
. When the vehicle is in motion, certain
functions and selections may not be
available.
. The language and units for both the
center information display and the
instrument cluster display can be
changed. For details, refer to “Dis-
plays” �P204.
. The images displayed in this Owner’s
Manual are sample images. The ac-
tual image may vary depending on the
region and vehicle specifications.
WELCOME SCREEN AND
GOOD-BYE SCREEN
s03bs02
Welcome screen and Good-bye screen
are motion graphics displayed on the
instrument cluster display and center
information display upon entering and
exiting the vehicle.
Welcome screen
s03bs0201
When the driver’s door is opened and
closed, the welcome screen will appear
for a short time.
NOTE
. The welcome screen will disappear
when the ignition switch is turned to
the “ON” position while the welcome
screen is shown.
. For a certain period of time after the
welcome screen has once appeared,
it may not appear again even when the
driver’s door is opened and closed.
This does not indicate a malfunction.
Good-bye screen
s03bs0202
The good-bye screen will be displayed
under the following conditions.
. The driver’s door is opened after the
ignition switch is put in the “OFF”
position.
. 1 minute have passed after the ignition
switch is put in the “OFF” position with
the driver’s door closed.
. 1 minute have passed when the
hands-free phone is used after the
ignition switch is put in the “OFF”
position.
INSTRUMENTS AND CONTROLS
194
English 
