北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
The ON/OFF setting of this function can
be changed by operating the center
information display. Refer to “Vehicle”
�P206.
Also, the setting can be changed by a
SUBARU dealer. Consult your SUBARU
dealer for details.
Welcome lighting function
s03ah0103
The welcome lighting function turns on
the low beam headlight for smooth
approaching to or exiting from the vehicle
at night or in a dark place.
The function is activated while all of the
following conditions are met.
. The light control switch is in the
“AUTO” position.
. It is dark enough to turn on the auto on/
off headlights.
NOTE
If the engine is turned off after turning off
the light switch, the welcome lighting
function may not operate (for Canada
models).
When approaching:
While the welcome lighting function is
activated, the low beam headlights will
automatically illuminate when unlocking
the doors by using the remote keyless
entry system.
The low beam headlights will remain
illuminated for 30 seconds*
1
and then turn
off. However, if any of the following
operations is done, the low beam head-
lights will turn off.
. The doors are locked.
. The light control switch is turned to a
position other than “AUTO”.
When exiting:
While the welcome lighting function is
activated, the low beam headlights will
remain illuminated even when either of
the following operation is done.
. The push-button ignition switch is
turned to the “OFF” position.
The low beam headlights will turn off
under any of the following conditions.
. 3 minutes have passed since the low
beam headlights were illuminated by
the welcome lighting function.
. 30 seconds have passed since the
door is opened and closed.*
1
. The light control switch is turned to a
position other than “AUTO”.
. The locking procedure is performed
twice. When performing the unlocking
procedure after performing the locking
procedure, perform the locking pro-
cedure twice again.
*1: The setting for the period of time in which
the low beam headlights remain on by the
welcome lighting function can be changed
by a SUBARU dealer. Contact your
SUBARU dealer for details. Also, you can
change the setting by operating the center
information display. For details, refer to
“Vehicle” �P206.
Battery drainage reduction
function
s03ah0107
When the headlights are illuminated and
the push-button ignition switch is in the
“OFF” position, the battery drainage
reduction function will be active.
When the battery drainage reduction
function is active, the following system
operations help reduce the risk of battery
discharge.
. The headlights turn off automatically
after 10 minutes.
. When you open or close the door or
operate the light control switch, the
headlights will turn off automatically
10 minutes later.
NOTE
. When you leave the vehicle, put the
light control switch in the “OFF” posi-
tion to prevent battery discharge.
. When you open or close the door or
operate the light control switch after
the headlights turn off automatically,
INSTRUMENTS AND CONTROLS
214
English 
