北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
3-1. PUSH-BUTTON IGNI-
TION SWITCH
s03bg
SAFETY PRECAUTIONS
s03bg04
Refer to “Safety Precautions” �P117.
OPERATING RANGE FOR
PUSH-BUTTON START SYS-
TEM
s03bg01
S_308336-W
Antennas
Operating range
NOTE
. If the access key fob is not detected
within the operating range of the
antennas inside the vehicle, the push-
button ignition switch and the engine
start cannot be operated.
. Even when the access key fob is
outside the vehicle, if it is placed too
close to the glass, it may be possible
to switch the power or to start the
engine.
. Do not leave the access key fob in the
following places. It may become im-
possible to operate the push-button
ignition switch and the engine start.
– On the instrument panel
– On the floor
– Inside the glove box
– Inside the door trim pocket
– On the rear seat
– At the corner of the cargo area
. When operating the push-button igni-
tion switch or starting the engine, if the
access key fob battery is discharged,
perform the procedure described in “If
Access Key Fob Does Not Operate
Properly” �P451. In such a case,
replace the battery immediately. Refer
to “Replacing Battery of Access Key
Fob” �P507.
SWITCHING POWER STATUS
s03bg02
S_308335-W
Operation indicator
Push-button ignition switch
The power status is switched every time
the push-button ignition switch is
pressed.
1. Carry the access key fob, and sit in the
driver’s seat.
2. Make sure the select lever is in the “P”
position.
3. Press the push-button ignition switch
without depressing the brake pedal.
Every time the button is pressed, the
power is switched in the sequence of
“OFF”, “ACC”, “ON” and “OFF”. When
the engine is stopped and the push-
button ignition switch is in “ACC” or
“ON”, the operation indicator on the
push-button ignition switch illuminates
in orange.
INSTRUMENTS AND CONTROLS
156
English 
