2026 Subaru Outback SUV Instruments and Controls -> When Access Key Fob Does Not Operate Properly User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Instruments and Controls -> When Access Key Fob Does Not Operate Properly for Your Subaru Outback SUV Seventh Generation (2026)

(159,1)
北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
Power
status
Indicator color Operation
OFF Turned off Power is turned off.
ACC Orange
The following sys-
tems can be used:
audio and acces-
sory power outlet.
ON
Orange
(while engine is
stopped)
All electrical
systems can be
used.
Turned off
(while engine is
running)
CAUTION
. To prevent the vehicle battery from
discharging, do not leave the push-
button ignition switch in the “ON” or
“ACC” position for a long time.
. To avoid a malfunction, observe
the following precautions.
– Do not spill drinks or other
liquids on the push-button
ignition switch.
– Do not touch the push-button
ignition switch with a hand that
is soiled with oil or other
contaminants.
. If the push-button ignition switch
does not operate smoothly, stop
the operation. Contact a SUBARU
dealer immediately.
. If the operation indicator on the
push-button ignition switch does
not illuminate even when the in-
strument panel illumination is
turned on, have the vehicle in-
spected at a SUBARU dealer.
. If the vehicle was left in the hot sun
for a long time, the surface of the
push-button ignition switch may
get hot. Be careful not to burn
yourself.
NOTE
. When operating the push-button igni-
tion switch, firmly press it all the way.
. If the push-button ignition switch is
pressed quickly, the power may not
turn on or off.
. If the indicator light on the push-button
ignition switch flashes in green when
the push-button ignition switch is
pressed, steering is locked. When this
occurs, press the push-button ignition
switch while turning the steering wheel
left and right.
Battery drainage reduction
function
s03bg0201
If you leave the push-button ignition
switch in the “ON” position (when the
engine is not running), a series of
messages will be displayed on the in-
strument cluster in the following order,
and then the push-button ignition switch
will be automatically set to “OFF”.
. After approximately 5 minutes, the
message “Turn Power OFF or Turn
Car ON to Charge Battery” will be
displayed.
. After approximately 15 minutes, the
battery charge drops and the mes-
sage “Some Functions Disabled Re-
duced Battery Level” will be displayed.
. When the select lever is in the “P”
position and the ignition switch re-
mains in the “ON” position for ap-
proximately 30 minutes, the system
automatically turns the push button
ignition switch to the “OFF” position.
WHEN ACCESS KEY FOB
DOES NOT OPERATE PROP-
ERLY
s03bg03
Refer to “If Access Key Fob Does Not
Operate Properly” �P451.
INSTRUMENTS AND CONTROLS
157
3

Related Topics

Popular Owner Manuals