北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
3-4. ILLUMINATION BRIGHT-
NESS CONTROL
s03aj
S_308342-W
The illumination brightness of the instru-
ment cluster, center information display
and climate control panel dims under the
following conditions.
. The light switch is in the “
” or “ ”
position when the ambient light is
dark.
. The light switch is in the “AUTO”
position and the headlights illuminate
automatically.
You can adjust the illumination brightness
for better visibility.
To brighten, turn the control dial upward.
To darken, turn the control dial downward.
NOTE
. When the control dial is turned fully
upward, the illumination brightness
becomes the maximum and the auto-
matic dimming function does not work
at all.
. The brightness setting is not canceled
even when the ignition switch is turned
to the “OFF” position.
. The operation method of illumination
brightness will differ depending
whether or not “Brightness Dial Con-
trol” in the center information display is
on. Refer to the operation method
indicated the following table.
“Brightness Dial Control” is on.
Operational
item
Instrument
cluster and
climate
control pa-
nel
Center in-
formation
display
Control dial Available Available
“Brightness
Adjust-
ment”*
1
on
the center
information
display
Not avail-
able
Not avail-
able
“Brightness Dial Control” is off.
Operational
item
Instrument
cluster and
climate
control pa-
nel
Center in-
formation
display
Control dial Available
Not avail-
able
“Brightness
Adjust-
ment” on
the center
information
display
Not avail-
able
Available
*1: When “Brightness Dial Control” is on,
“Brightness Adjustment” on the center
information display is not available.
For details about “Brightness Dial Con-
trol” on/off settings, refer to “Brightness/
Contrast” �P199.
AUTO DIMMER CANCEL
FUNCTION
s03aj01
When the ambient light is bright, the
illumination brightness is set to the max-
imum regardless of the position of the
control dial. In this case, you cannot
adjust the illumination brightness by
using the control dial. When the ambient
light is dark, you can dim the illumination
brightness as described above.
– CONTINUED –
INSTRUMENTS AND CONTROLS
161
3
English 
