Seatframes -> Rear seats for Your Volkswagen Multivan SUV Seventh Generation (2024-2025)

Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
Removing  
– Unclip wiring harness from retainer -2-.  
– Disconnect electrical connectors -3-.  
– Unclip control unit -1- from fastener -arrows-.  
– Remove control unit -1- in direction of -arrow A-.  
lk  
Installing  
Install in reverse order of removal.  
2.25  
Removing and installing seat adjust‐  
ment operating unit [E470]/[E471]  
Special tools and workshop equipment required  
♦ release tool - T10236-  
Driver seat adjustment operating unit - E470- and front passen‐  
ger seat adjustment operating unit - E471- will henceforth be  
referred to as “operating unit”.  
Removal and installation are described for the left side of vehi‐  
cle as an example.  
Removing  
– Remove outer seat trim ⇒ Rep. gr. 72 ; Removing and  
installing outer seat trim .  
– Lever off buttons -3- and -4- using release tool - T10236- .  
– Unscrew bolts -2-.  
– Detach operating unit -1-.  
224  
Rep. gr.72 - Seat frames  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
Installing  
Install in reverse order of removal, observing the following:  
Tightening torques  
♦ ⇒ Rep. gr. 72 ; Assembly overview – seat pan  
2.26  
Removing and installing operating unit  
for memory settings [E464]/[E465]  
The driver operating unit for memory settings - E464- and  
front passenger operating unit for memory settings - E465-  
will henceforth be referred to as “operating unit for memory  
settings”.  
Removal and installation are described for the driver side as an  
example.  
Removing  
– Remove outer seat trim ⇒ Rep. gr. 72 ; Removing and  
installing outer seat trim .  
lk  
– Release locking devices -2-. At the same time, remove oper‐  
ating unit for memory settings -1-.  
Installing  
Install in reverse order of removal.  
2.27  
Removing and installing seat trim  
Removal and installation are described for left side of vehicle as  
an example.  
Removing  
2. Front seats  
225  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
Vehicles with rear left footwell light - W45-  
– Remove rear left footwell light - W45- ⇒ Electrical system;  
Rep. gr. 96 ; Lights; Removing and installing rear footwell  
light [W45]/[W46] .  
All vehicles (continued)  
– Lever off seat trim -1- using commercially available plastic  
wedge, and remove it.  
lk  
Installing  
Install in reverse order of removal.  
2.28  
Removing and installing inner seat trim  
Removal and installation are described for the left side of vehi‐  
cle as an example.  
Removing  
Vehicles with backrest adjuster  
– Remove backrest adjuster ⇒ Rep. gr. 72 ; Removing and  
installing backrest adjuster .  
All vehicles (continued)  
– Move front seat to highest position.  
226  
Rep. gr.72 - Seat frames  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
– Press locking pin in spreader rivet -2- inwards.  
– Lever off spreader rivet -2- using commercially available  
plastic wedge.  
– Release retainers -3-.  
– Detach inner seat trim -1-.  
lk  
Installing  
Install in reverse order of removal.  
2.29  
Removing and installing outer seat trim  
Removal and installation are described for the left side of vehi‐  
cle as an example.  
Removing  
Manually adjustable front seat  
– Remove height adjustment handle ⇒ Rep. gr. 72 ; Remov‐  
ing and installing height adjustment handle .  
All vehicles (continued)  
– Move front seat to highest position.  
2. Front seats  
227  
lk  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
– Press locking pin in spreader rivet -2- inwards.  
– Lever off spreader rivet -2- using commercially available  
plastic wedge.  
– Release retainers -3-.  
– Remove outer seat trim -1-.  
Electrically adjustable front seat  
– Disconnect electrical connectors.  
All vehicles (continued)  
Installing  
Install in reverse order of removal.  
2.30  
Removing and installing seat longitudi‐  
nal adjustment motor [V28]/[V31]  
Driver seat longitudinal adjustment motor - V28- and front pas‐  
senger seat longitudinal adjustment motor - V31- will henceforth  
be referred to as “longitudinal adjustment motor”.  
Removal and installation are described for the left side of vehi‐  
cle as an example.  
Removing  
– Move front seat to highest position to reduce as much ten‐  
sion as possible on torsion rod.  
– Remove front seat ⇒ Rep. gr. 72 ; Removing and installing  
front seat .  
– Remove outer seat trim ⇒ Rep. gr. 72 ; Removing and  
installing outer seat trim .  
– Remove front belt buckle ⇒ Rep. gr. 69 ; Removing and  
installing front belt buckle .  
228  
Rep. gr.72 - Seat frames  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
– Disconnect electrical connector of seat longitudinal adjust‐  
ment motor.  
– Unclip electrical wire from lower seat pan frame -3-, and lay  
it to one side.  
– Unscrew bolts -2- while observing direction of rotation.  
Important  
•
Bolts -2- have left-hand thread.  
– Remove seat pan -1-.  
lk  
Installing  
Install in reverse order of removal, observing the following:  
Tightening torques  
♦ ⇒ Rep. gr. 72 ; Assembly overview – seat pan  
2.31  
Removing and installing fire extinguish‐  
er holder  
Removing  
– Remove fire extinguisher.  
– Unscrew bolts -2-.  
– Detach fire extinguisher bracket -1- from seat pan -3-.  
Installing  
Install in reverse order of removal, observing the following:  
2. Front seats  
229  
lk  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
Tightening torques  
♦ ⇒ Rep. gr. 72 ; Assembly overview – fire extinguisher  
2.32  
Removing and installing folding table  
Removing  
– Fold out folding table -1-.  
– Unscrew bolts -2-.  
– Remove folding table -1- from backrest -3-.  
Installing  
Install in reverse order of removal, observing the following:  
Tightening torques  
♦ ⇒ Rep. gr. 72 ; Assembly overview – folding table  
2.33  
Assembly overview – seat rake adjustment  
Overview shown for left side of vehicle as an example.  
230  
Rep. gr.72 - Seat frames  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
1 - Driver seat rake adjust‐  
ment motor - V243- / front  
passenger seat rake adjust‐  
ment motor - V244-  
❑ ⇒ Rep. gr. 72 ; Re‐  
moving and installing  
seat rake adjustment  
unit  
2 - Bracket  
3 - Bolt  
❑ Qty. 2  
❑ Renew after removing  
❑ 10 Nm  
4 - Adjustment spindle  
5 - Bolt  
❑ Renew after removing  
❑ 20 Nm  
2. Front seats  
231  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
3
Rear seats  
3.1  
3.1.1  
Assembly overview – individual seats  
Assembly overview – individual seats, without integrated three-point seat  
belt  
The overview is shown for one seat as an example.  
lk  
232  
Rep. gr.72 - Seat frames  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
1 - Seat frame  
❑ ⇒ Rep. gr. 72 ; Re‐  
moving and installing  
individual seats  
2 - Head restraint guide  
❑ Qty. 2  
❑ Renew after removing  
❑ ⇒ Rep. gr. 72 ; Re‐  
moving and installing  
head restraint guide  
3 - Head restraint  
❑ ⇒ Rep. gr. 72 ; Re‐  
moving and installing  
head restraint  
4 - Drawer bracket  
❑ ⇒ Rep. gr. 72 ; Re‐  
moving and installing  
seat trim  
5 - Rear trim  
❑ ⇒ Rep. gr. 72 ; Re‐  
moving and installing  
seat trim  
6 - Drawer bracket  
❑ ⇒ Rep. gr. 72 ; Re‐  
moving and installing  
seat trim  
7 - Drawer  
❑ Depending on equip‐  
ment/installation period  
8 - Control unit for heated left  
seat, row 2 - J158-  
❑ With control unit for  
heated right seat, row 2  
- J780- / control unit for heated right seat, row 3 - J785- / control unit for heated left seat, row 3 - J783-  
❑ Depending on equipment/installation period  
❑ Attached to underside of seat frame  
9 - Fitting trim  
❑ ⇒ Rep. gr. 72 ; Removing and installing seat trim  
10 - Button for left seat heating, seat row 2 - E964- / -E964- /  
❑ With button for right seat heating, seat row 2 - E965- / button for left seat heating, seat row 3 - E966- /  
button for right seat heating, seat row 3 - E967-  
❑ Depending on equipment/installation period  
11 - Seat frame trim  
❑ ⇒ Rep. gr. 72 ; Removing and installing seat trim  
12 - Spreader rivet  
❑ Qty. 2  
13 - Spreader rivet  
14 - Spreader rivet  
❑ Qty. 2  
15 - Seat frame trim  
❑ ⇒ Rep. gr. 72 ; Removing and installing seat trim  
3. Rear seats  
233  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
16 - Spreader rivet  
17 - Fitting trim  
❑ ⇒ Rep. gr. 72 ; Removing and installing seat trim  
18 - Damper  
❑ Depending on equipment/installation period  
19 - Seat cover  
lk  
❑ For ISOFIX guide  
❑ Depending on equipment/installation period  
20 - ISOFIX guide  
❑ ⇒ Rep. gr. 72 ; Removing and installing seat trim  
3.1.2  
Assembly overview – individual seats, with integrated three-point seat belt  
The overview is shown for one seat as an example.  
234  
Rep. gr.72 - Seat frames  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
1 - Seat frame  
❑ ⇒ Rep. gr. 72 ; Re‐  
moving and installing  
individual seats  
2 - Head restraint guide  
❑ Qty. 2  
❑ Renew after removing  
❑ ⇒ Rep. gr. 72 ; Re‐  
moving and installing  
head restraint guide  
3 - Head restraint  
❑ ⇒ Rep. gr. 72 ; Re‐  
moving and installing  
head restraint  
4 - Fitting trim  
❑ ⇒ Rep. gr. 72 ; Re‐  
moving and installing  
seat trim  
5 - Spreader rivet  
6 - Seat frame trim  
❑ ⇒ Rep. gr. 72 ; Re‐  
moving and installing  
seat trim  
7 - Spreader rivet  
❑ Qty. 2  
8 - Storage compartment  
❑ Depending on equip‐  
ment/installation period  
9 - Spreader rivet  
❑ Qty. 2  
10 - Seat frame trim  
❑ ⇒ Rep. gr. 72 ; Removing and installing seat trim  
11 - Spreader rivet  
12 - Fitting trim  
❑ ⇒ Rep. gr. 72 ; Removing and installing seat trim  
13 - Seat cover  
❑ For ISOFIX guide  
❑ Depending on equipment/installation period  
14 - ISOFIX guide  
❑ ⇒ Rep. gr. 72 ; Removing and installing seat trim  
3.2  
Assembly overview - locking mechanism  
The overview is shown for one seat as an example.  
3. Rear seats  
235  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
1 - Locking mechanism for  
rear seat backrest  
❑ Renew only together  
with seat frame  
2 - Adjuster element  
3 - Loop  
❑ ⇒ Rep. gr. 72 ; Re‐  
moving and installing  
locking mechanism for  
rear seat backrest  
4 - Pop rivet  
❑ Qty. 2  
3.3  
Assembly overview - head restraint and head restraint guide  
The overview is shown for one seat as an example.  
236  
Rep. gr.72 - Seat frames  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
1 - Seat frame  
❑ ⇒ Rep. gr. 72 ; As‐  
sembly overview – indi‐  
vidual seats  
❑ ⇒ Rep. gr. 72 ; Re‐  
moving and installing  
individual seats  
2 - Head restraint guide  
❑ Qty. 2  
❑ Renew after removing  
❑ ⇒ Rep. gr. 72 ; Re‐  
moving and installing  
head restraint guide  
3 - Head restraint  
❑ ⇒ Rep. gr. 72 ; Re‐  
moving and installing  
head restraint  
3.4  
Assembly overview - rear seat back‐  
rest  
3.4.1  
Assembly overview – rear seat backrest, without integrated three-point  
seat belt  
The overview is shown for one seat as an example.  
3. Rear seats  
237  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
1 - Seat frame  
❑ ⇒ Rep. gr. 72 ; As‐  
sembly overview – indi‐  
vidual seats  
❑ ⇒ Rep. gr. 72 ; Re‐  
moving and installing  
individual seats  
2 - Centre armrest  
❑ Depending on equip‐  
ment/installation period  
❑ Qty. 2  
❑ ⇒ Rep. gr. 72 ; Re‐  
moving and installing  
centre armrest  
3 - Trim collar  
❑ Depending on equip‐  
ment/installation period  
❑ Qty. 2  
❑ ⇒ Rep. gr. 72 ; Re‐  
moving and installing  
centre armrest  
4 - Pop rivet  
❑ Qty. 4  
5 - Adapter  
❑ Depending on equip‐  
ment/installation period  
❑ Qty. 2  
❑ ⇒ Rep. gr. 72 ; Re‐  
moving and installing  
centre armrest  
6 - Cross piece  
❑ Depending on equip‐  
ment/installation period  
❑ ⇒ Rep. gr. 72 ; Removing and installing back panel trim  
7 - Pop rivet  
❑ Qty. 4  
8 - Folding table  
❑ Depending on equipment/installation period  
❑ ⇒ Rep. gr. 72 ; Removing and installing back panel trim  
9 - Bolt  
❑ Qty. 4  
❑ 2.5 Nm  
10 - Rear section  
❑ ⇒ Rep. gr. 72 ; Removing and installing back panel trim  
11 - Pop rivet  
❑ Qty. 8  
12 - Rear trim  
❑ ⇒ Rep. gr. 72 ; Removing and installing seat trim  
13 - Clip  
❑ Qty. 2  
238  
Rep. gr.72 - Seat frames  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
3.4.2  
Assembly overview – rear seat backrest, with integrated three-point seat  
belt  
The overview is shown for one seat as an example.  
1 - Seat frame  
❑ ⇒ Rep. gr. 72 ; As‐  
sembly overview – indi‐  
vidual seats  
❑ ⇒ Rep. gr. 72 ; Re‐  
moving and installing  
individual seats  
2 - Cover for belt guide  
❑ ⇒ Rep. gr. 72 ; Re‐  
moving and installing  
seat trim  
3 - Adapter  
❑ ⇒ Rep. gr. 72 ; Re‐  
moving and installing  
back panel trim  
4 - Clip  
❑ Qty. 4  
5 - Back panel trim  
❑ ⇒ Rep. gr. 72 ; Re‐  
moving and installing  
back panel trim  
6 - Rear trim  
❑ ⇒ Rep. gr. 72 ; Re‐  
moving and installing  
seat trim  
3.5  
Assembly overview – seat rails  
Assembly overview – seat rails, without multifunction table  
3.5.1  
3. Rear seats  
239  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
1 - Cap  
❑ Qty. 12  
2 - Seat rail  
❑ Depending on equip‐  
ment/installation period  
❑ Qty. 6  
❑ ⇒ Rep. gr. 72 ; Re‐  
moving and installing  
seat rails  
3 - Nut  
❑ Qty. 36  
❑ 55 Nm  
3.5.2  
Assembly overview – seat rails, with multifunction table  
240  
Rep. gr.72 - Seat frames  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
1 - Cap  
❑ Qty. 12  
2 - Seat rail  
❑ Depending on equip‐  
ment/installation period  
❑ Qty. 6  
❑ ⇒ Rep. gr. 72 ; Re‐  
moving and installing  
seat rails  
3 - Nut  
❑ Qty. 38  
❑ 55 Nm  
3.6  
Removing and installing individual  
seats  
Removing  
– Remove individual seat from vehicle ⇒ owner’s manual .  
Installing  
Install in reverse order of removal, observing the following:  
Installing or retrofitting a new seat  
– Adapt control unit for wireless connection of seat occupied  
sensors ⇒ Vehicle diagnostic tester.  
3. Rear seats  
241  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
3.7  
Removing and installing head restraint  
Removal and installation is described for one head restraint as  
an example.  
Removing  
– Press release button -2- on head restraint guide -1- in direc‐  
tion of -arrow A-, and hold it there.  
– Pull out head restraint -3- in direction of -arrow B-.  
Installing  
Install in reverse order of removal.  
3.8  
Removing and installing head restraint  
guide  
Removing  
– Remove cover and padding of rear seat backrest ⇒ Rep.  
gr. 74 ; Removing and installing cover and padding of rear  
seat backrest .  
– Press fasteners -arrows-, and pull out head restraint guides  
-1-.  
Installing  
Install in reverse order of removal, observing the following:  
242  
Rep. gr.72 - Seat frames  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
– Insert new head restraint guides into recess.  
– Note installation position of head restraint guides.  
Important  
•
Head restraint guides must engage in recess.  
lk  
– Pull head restraint guides to make sure they are seated  
correctly.  
3.9  
Removing and installing trim for locking  
mechanism  
Removing  
– Unclip trim for locking mechanism -1- using commercially  
available plastic wedge, and remove it.  
Installing  
Install in reverse order of removal.  
3.10  
Removing and installing locking mech‐  
anism for rear seat backrest, holder  
Removal and installation are described for one individual seat  
as an example.  
Removing  
– Remove fitting trim ⇒ Rep. gr. 72 ; Removing and installing  
seat trim .  
3. Rear seats  
243  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
– Remove strap -1- from retainers -arrows-.  
Note  
Position of strap may vary.  
Installing  
lk  
Install in reverse order of removal.  
3.11  
Removing and installing centre armrest  
3.11.1  
Removing and installing centre armrest  
Removal and installation are described for one centre armrest  
as an example.  
Removing  
– Operate locking button -arrows-, and remove centre armrest  
-1-.  
Installing  
Install in reverse order of removal, observing the following:  
– Pull centre armrest to make sure it is seated correctly.  
3.11.2  
Removing and installing centre arm‐  
rest, trim collar  
Removal and installation are described for one trim collar as an  
example.  
244  
Rep. gr.72 - Seat frames  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
Removing  
– Remove centre armrest ⇒ Rep. gr. 72 ; Removing and  
installing centre armrest .  
– Turn trim collar -1- in direction of -arrow-, and remove it.  
Installing  
Install in reverse order of removal.  
3.11.3  
Removing and installing centre arm‐  
rest, adapter  
Special tools and workshop equipment required  
♦ Drill, commercially available  
♦ Suitable drill drill bit, commercially available  
♦ special pop rivet pliers - VAS 5072A-  
Removal and installation are described for one adapter as an  
example.  
Removing  
– Remove cover and padding of rear seat backrest ⇒ Rep.  
gr. 74 ; Removing and installing cover and padding of rear  
seat backrest .  
CAUTION  
Risk of injury caused by flying metal shavings.  
Eyes and skin can suffer irritation or injuries.  
– Put on safety goggles.  
– Put on protective gloves.  
3. Rear seats  
245  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
lk  
– Drill out pop rivets -1- and -2- using a commercially available  
power drill.  
– Remove adapter -3-.  
Installing  
Install in reverse order of removal, observing the following:  
– Use special pop rivet pliers - VAS 5072A- to insert new pop  
rivets ⇒ Electronic parts catalogue (ETKA) in the sequence  
-1- and -2-.  
3.12  
Removing and installing back panel  
trim  
3.12.1  
Removing and installing back panel  
trim  
Removal and installation are described for one individual seat  
as an example.  
246  
Rep. gr.72 - Seat frames  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
Removing  
– Lever off back panel trim -1- using commercially available  
plastic wedge.  
– Guide through seat belt, and remove back panel trim -1-.  
Installing  
Install in reverse order of removal.  
3.12.2  
Removing and installing adapter for  
back panel trim  
Removal and installation are described for one individual seat  
as an example.  
lk  
Removing  
– Remove cover and padding of rear seat backrest ⇒ Rep.  
gr. 74 ; Removing and installing cover and padding of rear  
seat backrest .  
– Pull off adapter for back panel trim -1- in direction of -arrow-.  
Installing  
Install in reverse order of removal.  
3.12.3  
Removing and installing folding table  
Removal and installation are described for one individual seat  
as an example.  
3. Rear seats  
247  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
Removing  
– Fold out folding table -1-.  
– Unscrew bolts -2-, and remove folding table -1-.  
Installing  
Install in reverse order of removal, observing the following:  
Tightening torques  
♦ ⇒ Rep. gr. 72 ; Assembly overview - rear seat backrest  
3.12.4  
Removing and installing cross piece for  
folding table  
Special tools and workshop equipment required  
♦ Drill, commercially available  
♦ Suitable drill drill bit, commercially available  
♦ pop rivet pliers - VAS 5072A-  
Removal and installation are described for one cross piece as  
an example.  
Removing  
– Remove back panel ⇒ Rep. gr. 72 ; Removing and instal‐  
ling back panel trim .  
CAUTION  
Risk of injury caused by flying metal shavings.  
Eyes and skin can suffer irritation or injuries.  
– Put on safety goggles.  
– Put on protective gloves.  
248  
Rep. gr.72 - Seat frames  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
– Drill out pop rivets -2- using commercially available power  
drill.  
– Remove cross piece for folding table -1-.  
Installing  
Install in reverse order of removal, observing the following:  
– Insert new pop rivets ⇒ Electronic parts catalogue (ETKA)  
using pop rivet pliers - VAS 5072A- starting from left side.  
lk  
3.12.5  
Removing and installing back panel  
Special tools and workshop equipment required  
♦ Drill, commercially available  
♦ Suitable drill drill bit, commercially available  
♦ pop rivet pliers - VAS 5072A-  
Removal and installation are described for one back panel as  
an example.  
Removing  
– Remove cover and padding of rear seat backrest ⇒ Rep.  
gr. 74 ; Removing and installing cover and padding of rear  
seat backrest .  
CAUTION  
Risk of injury caused by flying metal shavings.  
Eyes and skin can suffer irritation or injuries.  
– Put on safety goggles.  
– Put on protective gloves.  
3. Rear seats  
249  
lk  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
– Drill out pop rivets -2- using commercially available power  
drill.  
– Remove rear section -1-.  
Installing  
Install in reverse order of removal, observing the following:  
– Insert new pop rivets ⇒ Electronic parts catalogue (ETKA)  
using pop rivet pliers - VAS 5072A- starting at top.  
3.13  
Removing and installing seat trim  
3.13.1  
Removing and installing fitting trim  
Removing  
– Remove rear trim ⇒ Rep. gr. 72 ; Removing and installing  
seat trim .  
– Lever off spreader rivet -2- using commercially available  
plastic wedge.  
– Remove fitting trim -1- in direction of -arrow-.  
Vehicles with rear seat heating  
– Disconnect electrical connector.  
250  
Rep. gr.72 - Seat frames  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
All vehicles (continued)  
Installing  
Install in reverse order of removal.  
3.13.2  
Removing and installing ISOFIX guide  
Removal and installation are described for one ISOFIX guide as  
lk  
an example.  
Removing  
– Remove fitting trims ⇒ Rep. gr. 72 ; Removing and instal‐  
ling seat trim .  
– Pull off ISOFIX guide -1- in direction of -arrow-.  
Installing  
Install in reverse order of removal.  
3.13.3  
Removing and installing rear trim  
Removing  
– Pull off rear trim -1- in direction of -arrow-.  
– Disconnect electrical connector.  
Installing  
Install in reverse order of removal.  
3. Rear seats  
251  
lk  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
3.13.4  
Removing and installing belt guide cap  
Special tools and workshop equipment required  
♦ removal wedge set - VAS 895 015-  
Removing  
– Remove fitting trim ⇒ Rep. gr. 72 ; Removing and installing  
seat trim .  
– Unscrew bolt -2-.  
– Remove belt end fitting -1-.  
– Lever off belt guide cap -1- using removal wedge from re‐  
moval wedge set - VAS 895 015- .  
– Guide belt -2- through belt guide cap -1-.  
– Remove belt guide cap -1-.  
Installing  
Install in reverse order of removal, observing the following:  
Tightening torques  
♦ ⇒ Rep. gr. 69 ; Assembly overview – rear centre three-point  
seat belt  
252  
Rep. gr.72 - Seat frames  

Related Topics

Seatframes

Safety information and repair notes
Safety information
Repair instructions
Front seats
Assembly overview ? front seat
Assembly overview ? front backrest
Assembly overview ? seat pan
Assembly overview ? head restraint
Assembly overview ? seat height adjustment
Assembly overview ? seat rake adjustment
Assembly overview - lumbar support
Assembly overview - seat depth adjuster
Assembly overview ? folding table
Assembly overview ? fire extinguisher
Removing and installing front seat
Removing and installing seat height adjustment handle
Removing and installing seat rake adjustment motor [V243]/[V244]
Removing and installing seat height adjuster
Removing and installing front backrest
Removing and installing head restraint guide
Removing and installing lumbar support adjustment switch [E176]/[E177]
Removing and installing backrest adjuster
Removing and installing backrest cover panel
Removing and installing lumbar support adjustment motor V125/V126/V129/V130
Removing and installing seat depth adjuster
Removing and installing seat trim bracket
Removing and installing seat adjustment control unit
Removing and installing seat adjustment operating unit [E470]/[E471]
Removing and installing operating unit for memory settings [E464]/[E465]
Removing and installing seat trim
Removing and installing inner seat trim
Removing and installing outer seat trim
Removing and installing seat longitudinal adjustment motor [V28]/[V31]
Removing and installing fire extinguisher holder
Removing and installing folding table
Assembly overview ? individual seats
Assembly overview - locking mechanism
Assembly overview - head restraint and head restraint guide
Assembly overview - rear seat backrest
Assembly overview ? seat rails
Removing and installing individual seats
Removing and installing head restraint
Removing and installing trim for locking mechanism
Removing and installing locking mechanism for rear seat backrest, holder
Removing and installing centre armrest
Removing and installing back panel trim
Removing and installing seat rails

Popular Owner Manuals

Audi
BMW
Citroen
Ford
Honda
Peugeot

Latest Owner Manuals

Second Generation (2013-2020) Ford Fusion 4 Door Second Generation (2013-2020) Ford Fusion 4 Door
First Generation (2006-2012) Ford Fusion 4 Door First Generation (2006-2012) Ford Fusion 4 Door
Third Generation (2016-2023) Ford Galaxy Van Third Generation (2016-2023) Ford Galaxy Van
Second Generation (2007-2015) Ford Galaxy Van Second Generation (2007-2015) Ford Galaxy Van
First Generation (1995-2006) Ford Galaxy Van First Generation (1995-2006) Ford Galaxy Van
Second Generation (2013-2023) Ford Ecosport SUV Second Generation (2013-2023) Ford Ecosport SUV