Seatframes -> Removing and installing front backrest for Your Volkswagen Multivan SUV Seventh Generation (2024-2025)

Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
1 - Clamping nut  
❑ Qty. 2  
2 - Fire extinguisher holder  
❑ ⇒ Rep. gr. 72 ; Re‐  
moving and installing  
fire extinguisher holder  
3 - Fire extinguisher  
4 - Bolt  
❑ Qty. 2  
❑ 8 Nm  
2.11  
Removing and installing front seat  
Removing and installing front seat  
2.11.1  
Removal and installation are described for left side of vehicle as  
an example.  
Removing  
– Disconnect battery ⇒ Electrical system; Rep. gr. 27 ; Bat‐  
tery; Disconnecting and connecting battery .  
2. Front seats  
205  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
– Move front seat to foremost position.  
– Unscrew bolts -1-.  
– Move front seat to rearmost position.  
– Unscrew bolts -2-.  
– Tilt front seat towards rear.  
– Remove cover -1-.  
CAUTION  
It is possible to trigger pyrotechnic components unintentional‐  
ly.  
Risk of injury  
– Discharge static electricity by briefly touching door striker  
plate.  
NOTICE  
Risk of irreparable damage due to electrostatic discharge.  
– Do not touch connector contacts with your hands.  
– Touch the lifting platform or other earthed object to dis‐  
charge static electricity.  
– Disconnect electrical connectors.  
206  
Rep. gr.72 - Seat frames  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
NOTICE  
Risk of damage to the front seat at lifting out or during trans‐  
portation.  
– Do not grab the front seat by attachments when lifting (e.g.  
belt buckle, seat longitudinal adjustment lever, seat height  
adjustment lever or seat trim).  
– Use suitable means to protect attachments against dam‐  
age.  
Important  
The aid of an additional person is required for the subse‐  
quent work steps.  
– Lift out front seat.  
Installing  
lk  
Install in reverse order of removal, observing the following:  
– Insert front seat.  
– Insert centring pin on front inner side -arrow-.  
– Insert centring pin on rear inner side -arrow-.  
– Align seat rails.  
Important  
Seat rails must have same position in fasteners.  
– Align front seat.  
– Fit electrical connector.  
– Connect battery earth cable ⇒ Electrical system; Rep.  
gr. 27 ; Battery; Disconnecting and connecting battery .  
2. Front seats  
207  

Related Topics