Get Seatframes -> Removing and installing seat rails Guide for Volkswagen Multivan SUV Seventh Generation (2024-2025)

Multivan 2025 ➤ , Multivan 2022 ➤

General body repairs, interior - Edition 09.2024

lk

– Drill out pop rivets -1- and -2- using a commercially available

power drill.

– Remove adapter -3-.

Installing

Install in reverse order of removal, observing the following:

– Use special pop rivet pliers - VAS 5072A- to insert new pop

rivets ⇒ Electronic parts catalogue (ETKA) in the sequence

-1- and -2-.

3.12

Removing and installing back panel

trim

3.12.1

Removing and installing back panel

trim

Removal and installation are described for one individual seat

as an example.

246

Rep. gr.72 - Seat frames

Multivan 2025 ➤ , Multivan 2022 ➤

General body repairs, interior - Edition 09.2024

Removing

– Lever off back panel trim -1- using commercially available

plastic wedge.

– Guide through seat belt, and remove back panel trim -1-.

Installing

Install in reverse order of removal.

3.12.2

Removing and installing adapter for

back panel trim

Removal and installation are described for one individual seat

as an example.

lk

Removing

– Remove cover and padding of rear seat backrest ⇒ Rep.

gr. 74 ; Removing and installing cover and padding of rear

seat backrest .

– Pull off adapter for back panel trim -1- in direction of -arrow-.

Installing

Install in reverse order of removal.

3.12.3

Removing and installing folding table

Removal and installation are described for one individual seat

as an example.

3. Rear seats

247

Multivan 2025 ➤ , Multivan 2022 ➤

General body repairs, interior - Edition 09.2024

Removing

– Fold out folding table -1-.

– Unscrew bolts -2-, and remove folding table -1-.

lk

Installing

Install in reverse order of removal, observing the following:

Tightening torques

♦ ⇒ Rep. gr. 72 ; Assembly overview - rear seat backrest

3.12.4

Removing and installing cross piece for

folding table

Special tools and workshop equipment required

♦ Drill, commercially available

♦ Suitable drill drill bit, commercially available

♦ pop rivet pliers - VAS 5072A-

Removal and installation are described for one cross piece as

an example.

Removing

– Remove back panel ⇒ Rep. gr. 72 ; Removing and instal‐

ling back panel trim .

CAUTION

Risk of injury caused by flying metal shavings.

Eyes and skin can suffer irritation or injuries.

– Put on safety goggles.

– Put on protective gloves.

248

Rep. gr.72 - Seat frames

Multivan 2025 ➤ , Multivan 2022 ➤

General body repairs, interior - Edition 09.2024

– Drill out pop rivets -2- using commercially available power

drill.

– Remove cross piece for folding table -1-.

Installing

Install in reverse order of removal, observing the following:

– Insert new pop rivets ⇒ Electronic parts catalogue (ETKA)

using pop rivet pliers - VAS 5072A- starting from left side.

lk

3.12.5

Removing and installing back panel

Special tools and workshop equipment required

♦ Drill, commercially available

♦ Suitable drill drill bit, commercially available

♦ pop rivet pliers - VAS 5072A-

Removal and installation are described for one back panel as

an example.

Removing

– Remove cover and padding of rear seat backrest ⇒ Rep.

gr. 74 ; Removing and installing cover and padding of rear

seat backrest .

CAUTION

Risk of injury caused by flying metal shavings.

Eyes and skin can suffer irritation or injuries.

– Put on safety goggles.

– Put on protective gloves.

3. Rear seats

249

lk

Multivan 2025 ➤ , Multivan 2022 ➤

General body repairs, interior - Edition 09.2024

– Drill out pop rivets -2- using commercially available power

drill.

– Remove rear section -1-.

Installing

Install in reverse order of removal, observing the following:

– Insert new pop rivets ⇒ Electronic parts catalogue (ETKA)

using pop rivet pliers - VAS 5072A- starting at top.

3.13

Removing and installing seat trim

3.13.1

Removing and installing fitting trim

Removing

– Remove rear trim ⇒ Rep. gr. 72 ; Removing and installing

seat trim .

– Lever off spreader rivet -2- using commercially available

plastic wedge.

– Remove fitting trim -1- in direction of -arrow-.

Vehicles with rear seat heating

– Disconnect electrical connector.

250

Rep. gr.72 - Seat frames

Multivan 2025 ➤ , Multivan 2022 ➤

General body repairs, interior - Edition 09.2024

All vehicles (continued)

Installing

Install in reverse order of removal.

3.13.2

Removing and installing ISOFIX guide

Removal and installation are described for one ISOFIX guide as

lk

an example.

Removing

– Remove fitting trims ⇒ Rep. gr. 72 ; Removing and instal‐

ling seat trim .

– Pull off ISOFIX guide -1- in direction of -arrow-.

Installing

Install in reverse order of removal.

3.13.3

Removing and installing rear trim

Removing

– Pull off rear trim -1- in direction of -arrow-.

– Disconnect electrical connector.

Installing

Install in reverse order of removal.

3. Rear seats

251

lk

Multivan 2025 ➤ , Multivan 2022 ➤

General body repairs, interior - Edition 09.2024

3.13.4

Removing and installing belt guide cap

Special tools and workshop equipment required

♦ removal wedge set - VAS 895 015-

Removing

– Remove fitting trim ⇒ Rep. gr. 72 ; Removing and installing

seat trim .

– Unscrew bolt -2-.

– Remove belt end fitting -1-.

– Lever off belt guide cap -1- using removal wedge from re‐

moval wedge set - VAS 895 015- .

– Guide belt -2- through belt guide cap -1-.

– Remove belt guide cap -1-.

Installing

Install in reverse order of removal, observing the following:

Tightening torques

♦ ⇒ Rep. gr. 69 ; Assembly overview – rear centre three-point

seat belt

252

Rep. gr.72 - Seat frames

Seatframes -> Removing and installing seat rails for Your Volkswagen Multivan SUV Seventh Generation (2024-2025)

Related Topics

Seatframes

Popular Owner Manuals

Latest Owner Manuals