Multivan 2025 ➤ , Multivan 2022 ➤
General body repairs, interior - Edition 09.2024
Tightening torques
♦ ⇒ Rep. gr. 72 ; Assembly overview – front seat
♦ ⇒ Electrical system; Rep. gr. 27 ; Battery; Assembly over‐
view – battery
2.12
Removing and installing seat height
adjustment handle
Seat height adjustment handle is referred to hereafter as han‐
dle.
Removal and installation are described for the left-side of vehi‐
cle as an example.
Removing
– Pull handle -1- as far as possible upwards, and hold it there.
– Guide a commercially available screwdriver through handle
-1- and outer seat trim -2- up to retaining clip -3-.
– Release retaining clip -3- using the commercially available
screwdriver.
– Pull handle -1- in direction of -arrow- off seat height adjust‐
ment lever -4-.
lk
Installing
Install in reverse order of removal, observing the following:
– Pull to check proper engagement.
2.13
Removing and installing seat rake ad‐
justment motor [V243]/[V244]
Driver seat rake adjustment motor - V243- and front passenger
seat rake adjustment motor - V244- will henceforth be referred
to as “seat rake adjustment motor”.
Removal and installation are described for left side of vehicle as
an example.
210
Rep. gr.72 - Seat frames
English 
