2020-2026 Hyundai I10 4 Door Whilst driving -> Power brakes User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Whilst driving -> Power brakes for Your Hyundai I10 4 Door Third  Generation (2020-2026)

06  
BRAKING SYSTEM  
Power brakes  
Your vehicle has power-assisted  
EUDNHVꢀ WKDWꢀ DGMXVWꢀ DXWRPDWLFDOO\ꢀ  
through normal usage.  
‡ꢀ :HWꢀEUDNHVꢀPD\ꢀLPSDLUꢀWKHꢀYHKL-  
cle’s ability to safely slow down;  
the vehicle may also pull to one  
side when the brakes are applied.  
Applying the brakes lightly will  
indicate whether they have been  
affected in this way. Always test  
your brakes in this fashion after  
driving through deep water. To  
dry the brakes, lightly tap the  
brake pedal to heat up the brakes  
whilst maintaining a safe forward  
speed until brake performance  
returns to normal. Avoid driving  
at high speeds until the brakes  
function correctly.  
If the engine is not running or is  
turned off whilst driving, the power  
assist for the brakes will not work.  
You can still stop your vehicle by  
applying greater force to the brake  
pedal than typical. The stopping dis-  
tance, however, will be longer than  
with power brakes.  
When the engine is not running, the  
reserve brake power is partially  
depleted each time the brake pedal is  
applied. Do not pump the brake pedal  
when the power assist has been  
interrupted.  
Disc brakes wear indicator  
When your brake pads are worn and  
new pads are required, you will hear  
a high pitched warning sound from  
your front or rear brakes. You may  
hear this sound come and go or it  
may occur whenever you depress the  
brake pedal.  
3XPSꢀ WKHꢀ EUDNHꢀ SHGDOꢀ RQO\ꢀ ZKHQꢀ  
necessary to maintain steering con-  
trol on slippery surfaces.  
WARNING  
Take the following precautions:  
Note that some driving conditions or  
climates may cause a brake squeal  
when you first apply (or lightly apply)  
the brakes. This is normal and does  
not indicate a problem with your  
brakes.  
‡ꢀ 'RꢀQRWꢀGULYHꢀZLWKꢀ\RXUꢀIRRWꢀUHVW-  
ing on the brake pedal. This will  
create abnormal high brake tem-  
peratures, excessive brake lining  
and pad wear, and increased  
stopping distances.  
‡ꢀ :KHQꢀ GHVFHQGLQJꢀ GRZQꢀ Dꢀ ORQJꢀ  
or steep hill, downshift to a lower  
gear in order to control your  
speed without using the brake  
pedal excessively. Applying the  
brakes continuously will cause  
the brakes to overheat and could  
result in a temporary loss of  
braking performance.  
NOTICE  
To avoid costly brake repairs, do  
not continue to drive with worn  
brake pads.  
Information  
i
Always replace brake pads as complete  
front or rear axle sets.  
6-33  

Related Topics

Popular Owner Manuals