Audio system
Activate the Bluetooth® function on the
telephone and ensure that it is "visible to all"
(telephone configuration).
To protect the system, do not use a USB
hub.
The classifications available are those of
the portable device connected (artists/
albums/genres/tracks/playlists/audio
books/podcasts).
The default classification used is by
artists. To modify the classification used,
return to the first level of the menu then
select the desired classification (playlists,
for example) and confirm to go down
through the menu to the desired track.
Press "Phone".
The system does not support the simultaneous
connection of two identical devices (two
memory sticks or two Apple® players) but it is
possible to connect one memory stick and one
Apple® player at the same time.
If no telephone has yet been paired
in the system, a special page is
displayed in the screen.
Select "Connect tel" to start the
pairing procedure, and search
for the name of the system in the
telephone.
It is recommended that you use genuine
Apple® USB cables for correct operation.
The version of software in the audio
system may not be compatible with the
generation of your Apple® player.
Using the telephone's keypad, enter the PIN
displayed in the screen of the system or
confirm in the telephone the PIN displayed.
Connecting Apple® players
Telephone
Pairing a Bluetooth®
telephone
When pairing, a screen page is displayed
showing progress in the operation.
For reasons of safety and because
it requires sustained attention by the
driver, the pairing of a Bluetooth® mobile
telephone with the hands-free system of
your audio system must be done with the
vehicle stationary.
If the pairing procedure fails, it is
recommended that you deactivate
and then reactivate the Bluetooth®
function in your telephone.
Connect the Apple® player to the USB port
using a suitable cable (not supplied).
Play starts automatically.
Control is via the audio system.
.
5
English 
