Lighting and visibility
Selection of main lighting
mode
Direction indicators
Lighting controls
Selection and control of the various front and
F Left: lower the lighting control stalk passing
the point of resistance.
rear lamps providing the vehicle's lighting.
F Right: raise the lighting control stalk passing
the point of resistance.
In some weather conditions (e.g. low
temperature or humidity), the presence
of misting on the internal surface of the
glass of the headlamps and rear lamps is
normal; it disappears after the lamps have
been on for a few minutes.
"Motorway" function
F Press briefly upwards or downwards,
without going beyond the point of
resistance; the direction indicators will flash
five times.
F Turn the ring to align the white mark with the
4
symbol required.
Lighting off (ignition off)/
Daytime running lamps (engine
running).
Foglamps
Travelling abroad
If your vehicle is equipped with foglamps,
they operate with the dipped or main beam
headlamps.
Dipped beam headlamps/Main
beam headlamps.
If using your vehicle in a country that
drives on the other side of the road, the
headlamps must be adjusted to avoid
dazzling oncoming drivers.
Contact a PEUGEOT dealer or a qualified
workshop.
Automatic illumination of the dipped
beam/main beam headlamps.
Switching the headlamps
(dipped beam/main beam)
F Pull the lighting control stalk towards you
to switch between dipped and main beam
headlamps.
To flash the headlamps, pull the lighting control
stalk towards you, regardless of the position of
the ring.
61
English 
