Lighting and visibility
If the ambient light level is very low and the
traffic conditions permit:
Parking lamps
The system may suffer interference or not
work correctly:
This system enables you to leave the lamps on
when parked; with the ignition off, key in the
STOP position or key removed.
-
-
-
under conditions of poor visibility
(falling snow, heavy rain or thick fog,
etc.),
if the windscreen in front of the
camera is dirty, misted or obscured (by
a sticker, etc.),
-
Main beam comes on
automatically: these indicator
lamps come on in the instrument
panel.
If the situation requires a change of headlamp
beam, the driver can take over at any time.
Flashing the headlamps again pauses the
function and the system changes to "automatic
illumination of headlamps" mode.
if the vehicle is facing highly reflective
signs.
The function is disabled automatically below
9 mph (15 km/h).
The system is not able to detect:
If main beam is nevertheless necessary, flash
the headlamps again; main beam will then
remain on until the vehicle reaches a speed of
25 mph (40 km/h).
Above 25 mph (40 km/h), the function is
reactivated automatically (provided that the
headlamps have not been flashed again in the
meantime, to change to dipped beam).
-
road users that do not have their own
lighting, such as pedestrians,
vehicles whose lighting is obscured,
such as when driving behind a safety
barrier on a motorway, for example,
vehicles at the top or bottom of
a steep slope, on winding roads, on
crossroads.
-
F Move the ring on the lighting control stalk
to position O then to dipped or main beam
headlamps.
-
This indicator lamp comes on in
the instrument panel.
The lamps will remain on while you
are parked.
Leaving the lighting on for long periods
may significantly reduce the state of
charge of your vehicle's battery.
Deactivation
F
Turn the lighting control stalk
ring to the "Dipped beam"
position.
64
English 
