Lighting and visibility
Fast continuous wiping: 3 notches
downwards.
Single wipe: pull the control stalk towards
the steering wheel.
-
-
Headlamp beam height
adjustment
To avoid causing a nuisance to other road
users, the height of the halogen headlamp
beams must be adjusted according to the load
in the vehicle.
Wiper control stalk
Windscreen wipers
Wiping is active only when the ignition key is in
the MAR position.
Automatic rain sensitive
windscreen wipers
If your vehicle is fitted with this system, the
wiping speed is adapted automatically to the
intensity of the rainfall.
This function works in the dipped and main
beam headlamps position.
4
Automatic wiping: 1 notch downwards. This is
confirmed by a single wipe. Must be reactivated
after each time the ignition is switched off.
In this position, it is possible to increase the
sensitivity of the rain sensor by turning the ring.
Do not cover the rain sensor, located at
the top centre of the windscreen.
When washing the vehicle, switch off the
ignition or deactivate the automatic rain
sensitive wipers.
The control can have five different positions:
-
-
Wipers off.
Intermittent wiping: 1 notch downwards.
In this position, four wiping frequencies can be
selected by turning the ring.
Press these controls several times in
succession to adjust the headlamps.
An indicator in the screen shows
the adjustment position selected (0,
1, 2, 3).
Check that the windscreen wiper blades
can operate freely when using the wipers
in icy weather.
Use the step in the front bumper to remove
any accumulation of snow at the base of
the windscreen and on the blades.
-
-
-
-
very slow frequency,
slow frequency,
standard frequency,
fast frequency.
-
Slow continuous wiping: 2 notches
downwards.
65
English 
